University Of Horticultural Science Tender

Providing and fixing TV Cabinet one side laminate with 18 mm PLY/PLPB with edge bound for body, 6mm plain glass openable shutters and individual locking system for shutter, 9 mm PLY with bound for rear portion with Hafele fitting hinges, Hafele locks, Minifix assembly, screw legs, Handles and tower bolt. complete as per specifications, drawings and as directed by Engineer in charge. (Depth 0.45M)

Providing and fixing Crockery Unit one side laminate with 18 mm PLY/PLPB with edge bound for body, 6mm plain glass openable shutters and individual locking system for shutter, 9 mm PLY with bound for rear portion with Hafele fitting hinges, Hafele locks, Minifix assembly, screw legs, Handles and tower bolt. complete as per specifications, drawings and as directed by Engineer in charge. (Depth 0.45M)

Providing and fixing Shoe Rack one side laminate with 18 mm PLY/PLPB with edge bound for body, 18mm PLY/PLPB openable shutters and individual locking system for shutter, 9 mm PLY with bound for rear portion with Hafele fitting hinges, Hafele locks, Minifix assembly, screw legs, Handles and tower bolt. complete as per specifications, drawings and as directed by Engineer in charge.

Providing textured paint of approved quality, colour and shade to wall surface after cleaning and rubbing the wall surface with wire brush of medium size emery stone to remove all the loosely adhering particles, the surface is then cleaned with water and ensured that it is in line and level. The textured material is then mixed with 40-50% of clean water until a homogeneous thick slurry is formed, the slurry is left for 5-10 min, to react completely with ingredients. The textured finish prepared as above is then applied to the wall surface with suitable roller/spray gun/putty/ blade/ trowel to get the desired finish. The finished surface shall be applied with two coats of exterior paint of approved shade. The rate includes providing and removing scaffolding, all lead and lift and all other incidental charges etc., complete as per directions of the Engineer- in-charge of the work.

Providing and fixing 100mm wide venetian blinds of window fashion fabric of taiwan make, with 50mm thick powder coated channel with balance, imported, acrylic self alignable mechanism and equally placed spacers, imported tilting mechanism for easy tilting operation, with nylon imported thread and beadings, 100mm wide imported washable reusable fabric placed with top hanged and bottom with 100mm long bottom plate connected to nylon imported bottom link chain. The rate is inclusive of drilling holes for fixing channels to the wall, fixing threads and beadings and link chains, hard ware fixtures etc., complete as per drawing, specifications. (Conference room only)

Providing and fixing 6mm clear I opal white I solar I bronze I blue I green tinted multi wall poly carbonate sheet for tubular structure. The work including cost of all materials, labour charges and hire charges of machineries for cutting, welding, grinding and erection equipments, with all lead and lifts, transportation, loading and unloading and all other incidental charges etc. complete as per specification and directions of the engineer in charge of the work.

COIR COMPOSITE DOORS Engineered wood plastic composite door frames with cross section of75 x 125 mm Providing and fixing engineered wood door frame fabricated using Wood Plastic Composites profiles (WPC) of cross section 75 mm X 125mm with a density of 1250-1300 kg/m3, resistant to water, termite, fungal and UV, using four numbers of L shaped MS or plastic clamps at the corners of the frame to fix it firmly to form a rectangular shape door frame and provided with six numbers of 260mmx25mmx5mm size z shaped MS flat hold fasts for fixing the door frame in the wall and the material and process for manufacturing the door frame confirming to Specifications including all costs of labour, materials, fabrication, assembling, transportation, erection, incidental and unforeseen charges complete as per the directions of the engineer in charge of the work, but excluding the cost of fixtures and painting.

COIR COMPOSITE DOORS Engineered Coir Composite Flush Door Shutter of 30mm Thick. Providing and fixing engineered coir composite flush door shutter manufactured using infill solid core with coir and wood particle blended with high quality polymer encased with 28mm thick wooden styles and rails all-round the boundary of the shutter and veneer laminated with non oven coir felt impregnated with high temperature cure phenol formaldehyde resin of density 800kg/cum with high quality adhesive processed at 155 Deg. C, using 650 tonnage hot compression moulding press and all four sides of the door shutter coated with water resistant coating and whole process of manufacturing confirming to Specifications including all costs of labour, materials, fabrication, assembling, transportation, erection, incidental and unforeseen charges complete as per the directions of the engineer in charge of the work, but excluding the cost of fixtures and painting.

Providing and fixing Single shutter glass door of 12mm thick plain toughened glass. The door is fixed by using any approved make hardware fitting like patch fitting, pivot, floor machine, locking arrangements and suitable SS door rails with floral glass etching for 1/3 portion of door area etc complete. The rate includes cost of all materials, labour, hire of tools & machineries, and as per specification.

PROVIDING TRAPEZOIDAL PROFILED SHEET Providing and installing of pre painted Galvolume iron Trapezoidal profiled sheet of approved make 1060 mm width (1000 mm cover width), 28-30 mm crest height with crest distance of 200 mm c/c with 2 ribs at the centre for stiffening. The total coated thickness (TCT) of the sheet will be 0.47 mm +/- 0.02 mm tolerance Zinc-Alu Alloy coating AZ150 gsm as per ASTM 1397/A755-550 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 20-22 microns using self drilling/self tapping screws of 25 mm length, to be fixed over the existing purlins, rafters, channels and trusses.

KSRB 9-27.1 : Fixing of door frame in an existing opening including embeeding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debries with lead upto 50 m. including cost of materials, labour charges, complete as per specifications.

KSRB 7.11 : Providing and fixing in position aluminium windows and ventilators as per approved drawings with sliding shutters using three track window frame of size 92x31.75mm bottom section 1.3mm thick, weight 1.07kg/m; sides and top sections 1.3 mm, thick, weight 0.933 kg/m.shutter frame section comprising top and bottom section of size 40mmx18mm, wall thickness 1.25mm. weight 0.417 kg./m. shutter side outer 40mmx18mm. wall thickness 1.25mm. weight 0.417 kg/m, shutter interlock section 40mmx26.7mm wall thickness 1.1 mm. thick, weight 0.469 kg/m, the shutters mounted on nylon rollers with approved quality of fixtures such as aluminium handles tower bolts etc.; providing and fixing 5.5mm. thick plain glass for shutters fitted with rubber beading all aluminium sections including cutting to required length, joints mitred subdividing the frame tenonned and rivetted, in the assembled frame, stiffened with end clips for corners, angles etc., and fixed to the walls, lintels, floor beams/cills as the case may be, with necessary steel screws, raul plugs or teak wood gatties including cutting masonry or concrete and making good the original surface using cement mortar. using aluminium section powdered coated to a minimum of 60-70 microns with exterior durable pure polyester grade powder of approved quality.

Providing and fixing Smart Butterfly Silver Stainless steel door Aldrop 12 Inches. The work including cost of all materials, labour charges and hire charges of machineries for cutting,

Providing and fixing HDPE Fabric Pre assmbled roller shade Blinds with CRANK Handle( WALL Mounnt) 95% Sun & UV Blockage. The work including cost of all materials, labour charges and hire charges of machineries for cutting,

Fabricating, supplying & erecting M.S. angular Truss for all spans as per approved design and drawing .The entire truss is anchored suitably by using 4 Nos of M.S . anchor bolts at each support ,with base plate and shoe plate .THE Work includes cutting ,straightening ,placing The work includes cutting, straightening, placing in position of M.S angle and wleding wherever necessary, and applying one coat of red oxide primer coat to all the members including cost of all materials, labour charges, & hire charges of machineries for cutting, welding, grinding & erection equipments, etc., complete as per specification

KSRB 15-18.2 : Providing and applying enamel metal paint two coats ( excluding priming coat ) over new steel or other metal surface brushing to give an even shade after cleaning oil, grease, dirt and other foreign matter, including cost of materials, labour, complete as per specifications.

Electrification Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, junction box, elbows, screws at an interval of 300mm …. etc. as required. 20mm (Bangalore Electrical 2019-20 SR PgNo:3 Ino:1.8.1)

Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch box (Bangalore Electrical 2019-20 SR PgNo:5 Ino:2.2.2)

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.-1.5 sqmm (Bangalore Electrical 2019-20 SR PgNo:5 Ino:2.3.2)

2.5 sqmm (Bangalore Electrical 2019-20 SR PgNo:6 Ino:2.3.3)

4 sqmm (Bangalore Electrical 2019-20 SR PgNo:6 Ino:2.3.4)

Stepped Fan Regulator.(Bangalore Electrical 2019-20 SR PgNo:10 Ino:3.6.4)

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.-4 Module (Bangalore Electrical 2019-20 SR PgNo:9 Ino:3.5.2)

Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/79 and also comply with IS:1709/1984 with latest amendment, Rated voltage 220 V/ 50 Hz, Rated power input 48 W +/- 10 %, Rated current As per IS:374/79, Rated power factor 0.9 lagging(min), Rated speed 350 +/- 10% RPM, Rated air delivery 210 +/- 10% Cubic Meter Minimum, Rated service value ≥ 4.2 CMM / Watt, Three Blades of blade leaf 1.05 mm thick Aluminium Alloy sheet, Class B motor insulation, Bearing Two ball bearings, Top 6202, Bottom 6201 , as per IS specification, Motor wdg. Temp rise Shall not exceed 75 deg C over and ambient of 40 0C by resistance method at 245 Volts, Insulation resistance Shall not be less than Two Mega Ohms (2 M Ohms), Leakage current Should not exceed 210 Micro Amp, Power input, watt& current , Air Delivery & Fan Speed as per IS:374/1979 with latest amendment, 2 year manufacturer Warranty.-48" Sweep 5 Star (1200mm) (Bangalore Electrical 2019-20 SR PgNo:46 Ino:7.4.1)

Fixing a ceiling / wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 amps. ceiling rose of approved quality with necessary length of 23 / 0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired.(Bangalore Electrical 2019-20 SR PgNo:80 Ino:14.9)

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.-6Amps one way Switch (Bangalore Electrical 2019-20 SR PgNo:10 Ino:3.6.1)

6Amps 3way socket (Bangalore Electrical 2019-20 SR PgNo:10 Ino:3.6.3)

Supplying 25 litres capacity vertical/horizontal type wall mounting Electrical water heater with 22 SWG copper/SS sheet metal inner Container tinned inside Fiber body outside,filled with glass wool between inner and outer container for thermal insulation complete. The inlet and outlet pipes so arranged that water flow inside results in water to flow out from the inner container without turbulence. The Inner container shall have direct immersion type copper tube nickel plate .2KW capacity element with a neon indicator fitted with 20A capacity 25 to 85 degree Centigrade range thermostat. The water heater shall completely be wired with 40/0.0076 inch 3 core copper flexible wire of 1.5 meters length and the outer container provided with heavy gauge brackets for wall mounting. 5 Star With Fibre body (Bangalore Electrical 2019-20 SR PgNo:51 Ino:8.2.1)

Erection charges for fixing a …litres capacity wall mounting electric geysers using bolts, flat at one end nut and washers at the other end for through bolts and nuts and washers with 150x450x600mm back plate and wiring complete with 15A 3 pin top.Up to 30 Litres (Bangalore Electrical 2019-20 SR PgNo:80 Ino:14.13.1)

Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT > 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire > IK08. Power Factor >0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mouting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ........W System Power consumption. LED Efficiency>130lm/w, nominal CRI >75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008 . Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source.-LED Streetlight 70watts (Bangalore Electrical 2019-20 SR PgNo:67 Ino:12.8.3)

Supply, Installation, Testing & Commissioning of Electronic Liquid Level controller assembly of approved make consisting of digital water level indicator/magnetic float, in-built alarm, continuous display indicating Full , 3/4, 1/2, 1/4 and low level located in Sump E 4 Rate quoted should include for Supply, Laying & Testing of armoured copper cable from to Pump room (100 mtrs for each Nos Pump).Approved control panel will be located in pump house. Wiring from the control to level sensor & LED display operation ON/OFF indicator etc., complete in all respect.(MR)

Supplying and Fixing of 30W All in One single Arm Solar LED Street light with 5 years Battery warranty along with solar panel,Mounting Pole 6 Mtr Height including Mounting,Labour,Transportation charges as per the directions of site Engineer. (MR)

Providing ABC Powder based MAP 50, 6Kg Providing 6kg Fire Extinguisher Mono Ammonium Phosphate Powder 50, Stored Pressure Type, Pressure Gauge, Gross Weight 9.5 Kg, empty weight 3.5 Kg, Can Height 435MM, Diameter 160MM, Discharge Time less than 9 Secs, Controllable discharge mechanism (Squeeze grip with easy snap safety seal), Range minimum 4 meters, applicable on Class A,B,C and electrically started Fire, A Rating 3A, B Rating 21B, Can construction : Deep drawn & Co., Mig welded, valve Construciton : Forging and Mechining, Internal Coatingof Can: Epoxy powder coating, External Coating of Can: Epoxy Polyster power coating, Sheet metal thickness: 1.60MM, Helium Leak Detection Tested, ISI and EN Approved, 5 years Warranty with instalert system with Superior quality EPDM Rubber Hosepipe etc., complete (Belgaum PWD Civil SR PgNo:345 INo:40.4)