University Of Horticultural Science Tender

Dismantling plastering and removing the debris with a lead upto 200m. including cost of materials, labour, HOM complete as per specifications.

15.18 KSRB 15-3.10:Providing 20mm thick cement plaster in single coat with cement mortar 1:3 to stone masonry & concrte surface including rounding off corners wherever required smooth rendering ,:Providing and removing scaffolding ,including cost of materials,labour,curing complete as per specifications. + Water proofing Compound

8.4 KSRB 8.5:Providing and laying cinder concrete in cement 1:15(1 cement :15 CINDER of 12.5mm nominal gauge) on terraced roof or sunken slabs,laid to slope compacting,including cost of materials,labours,complete as per specifications.

KSRB13-8.7 : Providing and fixing to wall, ceiling and floor, low density polyethylene pipes 6.00 kgf/sq.cm working pressure 75mm outside diameter with special flange, compression type fittings, wall clips, making good the wall, ceiling and floor, including cost of all materials, labour charges, HOM of equipments and testing complete as per specifications. Specification No.KBS 13.2.15.1 / 13.9

KSRB13-8.9 : Providing and fixing to wall, ceiling and floor, low density polyethylene pipes 6.00 kgf/sq.cm working pressure 110mm outside diameter with special flange, compression type fittings, wall clips, making good the wall, ceiling and floor, including cost of all materials, labour charges, HOM of equipments and testing complete as per specifications. Specification No.KBS 13.2.15.1 / 13.9

Providing and fixing CI Nahani trap of approved make conforming to ISI specifications and construction of Cistern in M-15 as per directions (Rate is inclusive of cost of materials and fixtures and conveyance of materials to work spot). - 12.5cms x 7.5cms

KSRB 11-6 : Providing and fixing white vitreous china clay, water closet European type ( Pedestal type, S-trap ) with black solid plastic seat and lid, C.P brass hinges, rubber buffers. 10 litre white glazed / vitreous china clay low level, flushing cistern ( all are approved make ) with fittings, C.I / M.S brackets, 40mm diameter flush bend with fittings and clamps, overflow arrangements with specials and 25mm mosquito proof coupling of approved design, painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications. Specification No. KBS 11

4.5 KSRB 4-1.5 :Providing and laying in position plain cement concrte of mix M20 with OPC cement @ of M20 with OPC cement @ 300 kgs with 20mm and down size graded granite metal coarse aggregates @ .69 cum and fine aggregates @0.43cum .with superplastisiser @ 3lts confirming to is9103-1999 Reaaffirmed -2008, machine mixed ,concrte laid in layers not exceeding 15 cms.thick well compacted in foundation ,plinth and cills ,including cost of all materials ,labour ,HOM of machinery ,curing complete as per specifications.Specification No.KBS 4.1,4.2

14.36.2 KSRB 14.14-5: Providing Ceramic tiles of approved make ,shade and size for flooring , walls treads of steps and landings laid on bed of 12mm thick, cement mortar 1:3 mix flush pointing with white cement using colur pigment ,including cost of materials,labour,curing,complete as per specifications.for Ceramic Tiles of size 30x30 cms

Supply and fixing of door shutters made of rigid PVC extruded hollow section (Nandi or equivalent) of 20mmx200mm with the wall thickness of 1.0mm+/-0.1mm equally divided into 4nos with tongue an groove locking arrangements. The shutter frame is made of 30mm x 79mm with the wall thickness of 1.5mm+/-0.15mm section metric cut and joined at 4 corners with 125mmx225mm plastic brackets. The shutter shall be horizontally reinforced with 2nos of 8mm PVC rods. Teak wood battons shall be reinforced inside the door shutter during the fabrication of the door shutter at those points wherever the hardware is fixed on to the door shutter.

COIR COMPOSITE DOORS Engineered Coir Composite Flush Door Shutter of 30mm Thick. Providing and fixing engineered coir composite flush door shutter manufactured using infill solid core with coir and wood particle blended with high quality polymer encased with 28mm thick wooden styles and rails all-round the boundary of the shutter and veneer laminated with non oven coir felt impregnated with high temperature cure phenol formaldehyde resin of density 800kg/cum with high quality adhesive processed at 155 Deg. C, using 650 tonnage hot compression moulding press and all four sides of the door shutter coated with water resistant coating and whole process of manufacturing confirming to Specifications including all costs of labour, materials, fabrication, assembling, transportation, erection, incidental and unforeseen charges complete as per the directions of the engineer in charge of the work, but excluding the cost of fixtures and painting.

Providing & fixing Mosquito mesh shutter made out of Stainless steel/aluminium Mosquito proof mesh with 95% & above Visibility ,Which is fixed to the Powder coated aluminium frame section 40mm x18 mm wall thickness 1.25mm oneside open section & both side section open section of approved shade .The work including fixing the shutters with necessary accessories to complete as per specification including the labour charges Scaffolding charges for fixing the shutter to the existing frames

Providing and fixing 4mm thick glass panes to steel windows including TW beading of 10 mm thick and 2 coats of approved paints. including cost of materials, labour, HOM complete as per specifications.

Fixing doors, window,Mosquito mesh shutter and ventilators ,min walls.including cost of materials, labour, HOM complete as per specifications

Providng and fixing of Mathi or Nandi wood patties or Eqivalent of 25mm x12mm size to mesh Including two coats approved paint etc …complete ( including cost of screws ,etc) including cost of materials ,labour,HOM COMPLETE ,Scaffolding chargers as per specification ,as direction of Engineer in charge

Repair of existing door and windows by welding the new Hings, to existing door frame with screws & also repairing the aldrop/Handle /tower bolts etc , etc rate inclusive of labour , welding charges, HOM as per specification Direction of Engineer

KSRB 7.3 : Providing and fixing 1mm thick M.S. sheet garage door with frame and diagonal braces of size 40x40x6 mm angle Iron, 3.15mm thick M.S. Gusset plates at the junctions and corners, with handles, stoppers and locking arrangements etc., including applying a priming coat of red lead paint cost of materials, labour, HOM of machinery complete as per specifications. Specification No. KBS 7.9 / 7.12

KSRB 15-18.2 : Providing and applying enamel metal paint two coats ( excluding priming coat ) over new steel or other metal surface brushing to give an even shade after cleaning oil, grease, dirt and other foreign matter, including cost of materials, labour, complete as per specifications.

KSRB 15-15.1 : Providing and applying painting in two coats with plastic emulsion paint of approved brand on wall surface to give an even approved shade after thoroughly brushing the surface, free from mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour, complete as per specifications.

KSRB 15-17.6 : Providing and applying painting two coats ( excluding priming coat ) on new wood surface and / or wood based surface with enamel paint to give an even shade, cleaning the surface of all dirt, dust and foreign matter, sand papering including cost of materials, labour, complete as per specifications.

Providing and finishing external walls in two coats over one coat of primer with antifungal paint of approved brand and shade to give an even shade after thoroughly brooming the surface to remove all dirt and loose powdered material, free from mortar drops and other foreign matter cost of materials, labour, complete as per specifications.