University Of Agricultural Sciences Tender
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
University Of Agricultural Sciences - UAS Tender
Construction Works
Opening Date16 Mar 2021
Closing Date2 Apr 2021
Tender Amount₹ 84,81,837
Costs
EMD
₹ 1,69,700Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
UAS/2020-21/OW/WORK_INDENT2628Bid Award Id
ViewTender No
UAS/2020-21/OW/WORK_INDENT2628Tender Authority
University Of Agricultural Sciences ViewPurchaser Address
-Website
http://eproc.karnataka.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Dismantling weather proof course and removing and conveying the debris to a distance upto 200m.
35
-
27972
... More
Providing and laying in position plain cement concrete of mix 1:4:8 with OPC cement @ 180 kgs, with 40mm and down size graded granite metal coarse aggregates @ 0.85 cum and fine aggregates @ 0.57 cum machine mixed, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation, including cost of all materials, labour, HOM of machinery, curing complete as per specifications.
3
-
16530.48
... More
Providing and laying in position plain cement concrete of mix 1:2:4 with cement @ 240 kgs, with 20mm and down size graded granite metal coarse aggregates @ 0.878 cum and fine aggregates @ 0.53 cum, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation, plinth and cills, including cost of all materials, labour, HOM of machinery, curing complete as per specifications.
5
-
29386.8
... More
Providing and laying in position reinforced cement concrete of Design mix M25 with OPC cement @ 340 kgs, with 20mm and down size graded granite metal coarse aggregates @ 0.70 cum and fine aggregates @ 0.47 cum, with super plasticisers @ 3 liters confirming to is 9103-1999 reafirmed-2008 at machine mixed, concrete laid in layers not exceeding 15 cms thick, vibrated for all works in foundation for footing pedestals, retaining walls, return walls, walls (any thickness) including attached pilasters, columns pillars, posts, struts, buttresses, bed blocks, anchor blocks and plinths etc., including cost of all materials, labour, HOM of machinery, curing, complete as per specifications.
4.5
-
28537.92
... More
Providing and laying in position reinforced cement concrete of design mix M25 with OPC cement @ 340 kgs, with 20mm and down size graded granite metal coarse aggregates @ 0.70 cum and fine aggregates @ 0.47 cum, with super plastisiser @ 3 lts confirming to IS 9103-1999 Reafirmed-2008, machine mixed, concrete laid in layers not exceeding 15 cms thick, vibrated for all works in ground floor level for roof slabs, staircase, lintels and beams retaining walls, return walls, walls (any thickness) including attached pilasters, columns, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window cills, fillets etc., including cost of all materials, labour, HOM of machinery, curing, complete as per specifications.
103
-
679120.2
... More
Providing and laying in position reinforced cement concrete of design mix M20 with OPC cement @ 24 kgs, with 12mm and down size graded granite metal coarse aggregates @ 0.05175 cum and fine aggregates @ 0.0345 cum, with superplastisiser @ 0.225 lts, machine mixed, well compacted for plain chajja of 7.5 cms. average thickness, upto ground floor level, including cost of all materials, labour, HOM of machinery, finishing, curing, complete but excluding cost of reinforcement as per specifications.
20
-
9633.6
... More
Providing and removing centering, shuttering, strutting propping etc., for columns, pillars, post and struts, circular or curved in plain including cost of all materials, labour complete as per specifications.
145
-
142975.8
... More
Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for sides and soffits of beams, beam haunchings, cantilever girders, bressumers and lintels not exceeding 1m in depth including cost of all materials, labour complete as per specifications.
240
-
75734.4
... More
Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for flat surface such as suspended floors, roofs, landings, balconies and likes, thickness upto 200mm including cost of all materials, labour complete as per specifications. -do- 0 to 5 mtr
320
-
138240
... More
Providing and removing centering, shuttering, strutting, propping etc., for chajjas, corbels etc., including edges including cost of all materials, labour complete as per specifications.
20
-
7106.4
... More
Providing T.M.T steel reinforcement for R.C.C. work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) cost of materials, labour, HOM of machinery complete as per specifications.TMT bars Fe 500
17
-
1316669.04
... More
Providing and constructing granite / trap/ basalt size stone masonry in foundation with cement mortar 1:6, stone hammerd dressed in courses not less than 20 cms high, bond stones at 2 m. apart in each course including cost of materials, labour, curing complete as per specifications.
4
-
19854.72
... More
Providing and constructing granite/ trap/ basalt size stone masonry in basement with cement mortar 1:6, edges of stones chistle dressed in courses not less than 15 cms high, bond stones at 2 m. apart in each course including cost of materials, labour, scaffolding, curing complete as per specifications.
2
-
11843.22
... More
Providing and constructing load bearing wall with solid concrete blocks of size 400x200x200mm blocks having block density not less than 1800 kg/ m3 having a minimum average compressive strength of 4.00 N/mm2 confirming to IS 2185 (Part 1):2005 and constructed with CM 1:4, as per IS 2572:2005 including cost of all materials labour charges, scaffolding, curing, hire charges of machineries etc., complete as per specifications.
500
-
538380
... More
Providing and constructing non load bearing wall with solid concrete blocks of size 400x100x200mm having a block density not less than 1800 kg/m3 having a minimum average compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part 1):2005 and constructed with CM 1:4, as per IS 2572 :2005 including cost of all materials, labour charges, scaffolding, curing, hire charges of machineries etc., complete as per specifications.
30
-
27410.4
... More
Providing and fixing M.S. grill work for windows and ventilators using M.S. flats, or M.S. square rods, or combination of M.S. flats and square rods as per approved design, drawing including cutting steel sections and welding the same to required pattern with a coat of red lead primer, cost of materials, fixtures, labour and HOM of machinery complete as per specifications.
1000
-
109080
... More
Providing and fixing stainless steel 304 grade for staircase railings, balconies, ramps with hand rail, 50mm dia 16 guage hollow pipe welded to vertical hollow 50mm dia pipe of 16 guage, stainless steel vertical pipe spaced at 1.20m regular intervals and 5 Nos. of 25mm dia. Stainless steel hollow horizontal pipe are welded to vertical 50mm dia hollow pipe. The entire assembly is fixed to staircase concrete by using expansion bolts by drilling concrete etc., complete including cost of materials, labour, HOM of machineries and electrical charges etc., complete as per specifications.
25
-
162729
... More
Providing and fixing in position aluminium windows and ventilators as per approved drawings with sliding shutters using double track window frame section of size 61.85x31.75mm. with 1.2mm thick, bottom section weight 0.695 kg/m, sides and top sections 1.3mm. thick weight 0.659 kg/m; and shutter comprising top and bottom section of size 40mmx18mm, 1.25mm. thick 0.417 kg./m; shutter outer side 40mx18mm, 1.25mm. thick weight 0.417 kg/m, shutter interlock section 40mmx26.7mm, 1.1mm thick, weight 0.469 kg/m. the shutters mounted on nylon rollers with approved quality of fixtures such as aluminium handles tower bolts etc.; and providing and fixing 5.5mm. thick plain glass for shutters fitted with rubber beading aluminium sections including cutting to required length, joints mitred subdividing the frame tenonned and riveted in the assembled frame stiffened with end clips at corners angles etc., and fixed to the walls, lintels, floor beams / cills as the case may be with necessary steel screws, raul plugs, or teak wood gatties including cutting masonry or concrete and making good the original surface using cement mortar, aluminium sections pretreated for removal of any Specification. Using aluminium section powdered coated to a minimum of 60-70 microns with exterior durable pure polyester grade powder of approved quality.
50
-
234522
... More
Providing and fixing in position collapsible steel shutters with single or double leaf with vertical channel 20mmx10mmx2mm braced with flat iron diagonals 20mmx5mm size, with top and bottom rails of T iron sections of 40x40x6mm with 38mm dia steel pulleys complete with bolt and nuts, locking arrangements, stoppers, handles on both sides with 7.5 cms opening at 10 cms, c to c applying a priming coat of red lead paint, cost of materials, labour, HOM of machinery complete as per specifications. Size of gate 2.4m x 1.4m
10
-
56332.8
... More
Providing, fabricating and fixing of stick type structural glazing using Alluminium Extrusions of 63.5 mm x 58.00 mm x 2.25 mm of 1.73 kgs/ mtr for vertical and Horizontal members and 63.5 mm x 38.1 x 1.33 mm of 0.759 kg/ Mtr, as outer frame with Electro Anodized Paint coated block finishing, using 6mm thick imported glass reflective hard coated ocean blue raw glass with all necessary accessories like ultra glass Silicon sealant of Space tape, Making tape, Galvanized Anchaor bolt, machine screws, 6mm thick M.S. angle 50mm x 150mm x 6mm M.S. Galvanized L Brackets, structural sealent setting clocks, fasteners, wall connection etc., complete.
30
-
215751.6
... More
Providing and fixing 65mmx125mm GRP Doorframe fabricated using E-Glass Chopped Strand Mat (CSM). U.V. stabilized Isopthalic Gelcoat and Isopthalic resin. The thickness of the GRP skin shall not be less than 2.0 mm. The door frame consists of four segments, which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screws. The GRP frame shall be provided with wooden reinforcement of 6 locations for high screw holding capacity for fixing metalling hold fast and shall be consolidated by filling with medium density foam/ Plaster of Paris with fibre reinforcement. Six Numbers of 260mmx25mmx5mm size S shaped M.S. flat hold fast shall be provided with the frame.
16
-
9504
... More
Providing and fixing factory made single leaft rigid GRP Sandwich composite door shutter of 32mm thick, laminated with two GRP skins with wood grain finish, fabricated using U.V. – stabilized Isopthalic Gelcoat and on layer of 45 gsm. E-Glass Chopped strand Mat (CSM), impregnated with orthopthalic polyster resin. The thickness of the skins shall not be less than 1.5mm Expanded Polystyrene (EPS) structural foam panel of 29mm thickness and a density of 20 Kg/ m3 shall be used as core material. Wooden reinforcements made of Seasoned Salwood block of cross section not less than 28mmx32mm and also necessary salwood reinforcements for fixing the metal fittings such as tower bolts, aldrops, handles etc., shall be provided. A structural adhesive compatible with EPS foam shall be used for bonding the core materials, the Salwood reinforcement and the skins. The materials and process for manufacturing the door shutters shall confirm to RV/TIFAC Composites Design centre Standards and specifications and the door shutters tested in confirmation to IS 4020-1994. The finish shutter will be plain colour White/ Ivory/ Beige/ Light Grey or any other colour using high quality pigments. Excluding cost of fixtures and inclusive of supply of shutters to respective work spot.
4
-
12977.28
... More
Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps) but including cost of materials, labour, HOM of machineries complete as per specifications.
0.5
-
47306.16
... More
Providing and fixing flush door shutter made out of solid core black board type, well seasoned chemically treated hard wood battens and internal frame with minimum 45 mm wide wooden frame all-round door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door using liquid phenol formaldehyde resin as per IS specification 2202 (Part-I) 1991. From manufacturer (Factory) complete as per specification. 35mm thick both side Commercial
11
-
30341.52
... More
Fixing of door frame in an existing opening including embeeding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1;3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debries with lead upto 50 m. including cost of materials, labour charges, complete as per specifications.
5
-
7376.4
... More
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc., consisting of following application. (a) Applying and grouting a slurry coat of neat cement using 2.75 kg/ sqm of cement admixed with proprietary water proofing compound conforming to IS :2645 over the RCC slab after cleaning the surface before treatment. (b) Laying cement concrete using broken brick bats 25mm to 100mm size with 50% of cement mortar 1:5 admixed with proprietary water proofing compound conforming IS:2645 over 20mm thick layer of cement mortar 1:5 admixed with proprietary water proofing compound to required slope and treating similarly the adjoining walls upto 300mm height including rounding off junctions of walls and slab. (c) After two days of proper curing, applying a second coat of cement lurry admixed with proprietary water proofing compound, (d) Finishing the surface with 20mm thick joint less cement mortar of mix 1:4 admixed with proprietary water proofing compound and finally finishing the surface with trowel and neat cement slurry and making of 300x300mm square. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test including cost of materials, labour complete as per specifications.
350
-
375732
... More
Providing and fixing Vitrified glazed tiles of approved make, quality and colour of size 600x600x10mm thick fixed on bed of 12 thick cement mortar for flooring, skirting and jointed with neat cement slurry mixed with pigment to mach shade of tiles, including providing spacers at required interval and removing stains, including cost of all materials, mortar, labour etc., complete as per specifications.
210
-
204573.6
... More
Providing and laying flooring using prepolished, water cut / gang saw 19mm thick granite laid over bed of 20mm thick 1:4 cm & jointed with 1:4cm & jointed with neat cement slurry mixed with pigment to mach shade of granite slabs including laying POP on finished surface and cleaning the surface, including the cost of all materials and labours etc., complete as per specification. -do- using black granite / Multy Red /Ruby Red / Black/ Hassan Green Granite of width not less than 900mm.
140
-
338688
... More
Providing Ceramic tiles of size 30x30cms 6mm thick approved make shade and size for flooring, treads of steps and landings laid on a bed of 12mm thick, cement mortar 1:3 mix, flush pointing with white cement using colour pigment including cost of materials, labour, curing, complete as per specifications.
20
-
26179.2
... More
Providing skirting, dadoing, rises of steps with colour glazed tiles on 30x45 cms 6mm thick with border of size 30x10 cms thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications.
75
-
103437
... More
Providing and fixing 20mm thick gang saw water cut telephonic black granite in CM 1:4 proportion with a coat of rough plastering using CM 1:4, cut to required shape, pattern with paper joints, finished with cement mortar using white cement and colour pigments to match the colour of slab making through jointing with sealant, grooves in joints including cost of curing etc., complete including cost and conveyance of all materials, labour for all items of work, HOM of equipment etc., complete as per specification.
20
-
51710.4
... More
Providing 15mm thick cement plaster in single coat with cement mortar 1:6, to brick masonry including rounding off corners wherever required smooth rendering,: Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications.
600
-
138672
... More
Providing rough cement plastering 15mm thick in single coat with cement mortar 1:6, to brick masonry for base of dadooing works with sand of approved quality, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications.
85
-
18176.4
... More
Providing 18mm thick cement plaster in single coat with cement mortar 1:6, to brick masonry including rounding off corners wherever required smooth rendering,: Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications.
850
-
235926
... More
Providing 12mm thick cement plaster in single coat with cement mortar 1:3, to ceiling including rounding off corners wherever required smooth rendering,: Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications.
380
-
98906.4
... More
Providing and fixing plaster mesh 150mm wide manufactured out of hot dipped galvanized iron of nominal thickness 0.35mm with a zinc coating of 120gms per sqm width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. (length of mesh only be measured for payment).
790
-
31568.4
... More
Providing and laying in position reinforced cement concrete of design mix M20 with OPC cement @ 27.20 kgs. with 12mm and down size graded granite metal coarse aggregates @ 0.05865 cum and fine aggregates @ 0.0391 cum, with superplastisier @ 0.22 lts. Machine mixed, well compacted for plain chajja of 8,5 cms. average thickness, upto ground floor level, including cost of all materials, labour, HOM of machinery, finishing, curing, finishing, curing, complete as per specifications. Extra for providing Throating or drip moulding to R.C.C. chajja with plastering (labour charges) as per specifications.
11.75
-
418.77
... More
Providing applying two coats of wall putty to inside plastered walls and ceiling using white cement putty. Scrapping and levelling the surface using steel blade and preparing the surface even and smooth by using different grade sand papers, including cost of all materials, cost of labour and scaffolding etc., complete as per the specification. (a) 100% for fresh surface
1000
-
90720
... More
Providing and applying painting in two coats with plastic emulsion paint of approved brand on wall surface to give an even approved shade after thoroughly brushing the surface, free from mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour, compete as per specifications. -do-with primer
600
-
58320
... More
Providing and applying painting in two coats with plastic emulsion paint of approved brand and shade on ceiling and / or sloping roof as per specifications.
380
-
38988
... More
Providing and finishing external walls in two coats over one coat of 100% acrylic silicon glazed primer with antifungal paint for top coat of approved brand and shade to give an even shade after thoroughly brooming the surface to remove all dirt and loose powdered material, free from mortar drops and other foreign matter cost of materials, labour, complete as per specifications.
850
-
168912
... More
Applying priming coat over new wood surface and / or wood based surface, after brushing with ready mix enamel priming paint including preparing the surface after thoroughly cleaning oil, grease, dirt and foreign matter, sand papering and knotting ready mix paint including cost of materials, labour, complete as per specifications.
30
-
1749.6
... More
Providing and applying painting two coats (excluding priming coat) on new wood surface and / or wood based surface with enamel paint to give an even shade, cleaning the surface of all dirt, dust and foreign matter, sand papering including cost of materials, labour, complete as per specifications.
30
-
3272.4
... More
Providing and applying enamel metal paint two coats (excluding priming coat) over new steel or other metal surface brushing to give an even shade after cleaning oil, grease, dirt and other foreign matter, including cost of materials, labour, complete as per specifications.
80
-
8553.6
... More
Providing and fixing white vitreous china clay, flat back wash basin size 630x450mm with a single 15mm C.P. brass pillar tap with C.I. / M.S. brackets, 32mm C.P. brass waste of standard pattern, painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specification.
4
-
13603.68
... More
Providing and fixing white vitreous china clay, water closet European type (Pedestal type, P-trap) with black solid plastic seat and lid, CP brass hinges rubber buffers. 10 litre low level, P.V.C. flushing cistern (all are approved make) with fittings, C.I. / M.S. brackets, 40mm diameter flush bend with fittings and clamps, overflow arrangements with special and 25mm mosquito proof coupling of approved design, painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour, complete as per specifications.
2
-
10704.96
... More
Providing and fixing white vitreous china clay, water closet Orissa pattern of size 580x440mm with integral type footrests, 100mm S or P trap, 10 litre low level, PVC flushing cistern (all are approved make) with fittings, C.I. / M.S. brackets, 32mm diameter flush pipe fittings and clamps, overflow arrangements with special and 25mm mosquito proof coupling of approved design, painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications.
1
-
4561.92
... More
Supply and fixing of jaguar bib cock con -047KN
10
-
9600
... More
Providing and fixing 600x450mm beveLead edge mirror of superior glass with 6mm hard board backing and fixed to wooden cleats with C.P. screws, washers, including cost of materials, labour complete as per specifications.
4
-
4998.24
... More
Providing and fixing laboratory sink of white glazed fire clay of size 600x450x200mm with M.S./C.I. brackets, C.P. brass chain with rubber plug, 32mm C.P. brass waste, tap with union, brass stop cock complete, painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, laobur complete as per specifications.
5
-
19218.6
... More
Providing and fixing 7.5 cms to 15.00 cms dia. NP grating 100mm dia.
20
-
3240
... More
Wall bores in Brick masonry upto 45 cm thick. including cost of materials, labour, HOM complete as per specifications.
14
-
1905.12
... More
Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement & the cost of cutting chases & making good the same including testing of joints complete. (Concealed work including cutting chases and good the walls etc.,) -do- 20mm nominal OD pipes.
40
-
10152
... More
Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete. (Concealed work including cutting chases and good the walls etc. 1) 25mm nominal OD pipes
40
-
12657.6
... More
Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete. (Concealed work including cutting chases and good the walls etc.) 1) 32mm nominal OD pipes
40
-
16156.8
... More
Providing and fixing in position brass gate valve with C.I. wheel of approved quality (screwed end) 20mm dia. nominal bore including cost of all materials, labour and HOM of equipments with all leads complete as per specifications.
5
-
1814.4
... More
Providing and fixing in position brass gate valve with C.I wheel of approved quality (screwed end) 25mm nominal bore including cost of all materials, labour and HOM of equipments with all leads complete as per specifications.
5
-
2424.6
... More
Providing and fixing in position brass gate valve with C.I wheel of approved quality (screwed end) 32mm nominal bore including cost of all materials, labour and HOM of equipments with all leads complete as per specifications.
5
-
4482
... More
Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling & testing of joints complete. (external work). -do-50mm nominal OD pipes
40
-
18662.4
... More
Supplying and fixing 110mm dia. pipe supreme make.
80
-
29700
... More
Providing, fabricating, assembling and fixing in position anodized aluminium partitions using sections in combination of plain, single grove and double grove as per requirements for the frames of overall size 101.6mmx44.45mm, 3.18mm. thick having section weight, plain sections 2.40 kg/m single grove section 2.541 kg/m, and double grove section 2.683 k/m and bottom 46 kg/m; aluminium louvers of size 77.6mmx27.6mm 1.7mm. thick section weight 0.483 kg/m; bottom portions provided with 12mm. thick prelaminated sheet both side of approved colour lamination exterior grade; aluminium sections of mat finish or glossy finish using section, spacing of vertical member shall not exceed 0.6 m. c to c; sections are cut to the required lengths, joints mitered and corners grinded subdividing frames tennoned and riveted to the frames, the assembled frame should be stiffened with corner angles stripped and fixed with screws, rawl plugs and teak wood gutties to R.C.C columns or masonry on sides, R.C.C lintels or beams at top and floor at bottom, including cutting chistling and making good with cement mortar to match the surface, providing and fixing bottom panel filled with the materials to a height of 0.9m. from floor level; and 5.5 mm. thick plain glass for middle portion viz., 0.9m. to 2.13 m. and top panel with lower sections, the glass and panels fitted with glazing clips of 19mmx17.3mm. with thickness of 0.9mm. weight 0.124 kg/m; aluminium sections pre-treated for removal of any rust and prevention of further rust formation, and coated with greasy materials for non-adherence of mortars or any other sticky materials; vertical members embedded in the flooring by making suitable size holes and fixing with cement mortar, with necessary opening for fixing of doors of standard size (excluding cost of door opening) All the frame should be thoroughly cleaned free from rust, scale or dirt including cost of materials, fixtures, labour and HOM of machinery complete as per specifications. -do- using aluminium section anodized to 12-15 microns
125
-
636390
... More
Providing, fabricating, assembling and fixing in position anodized aluminium shutters to the existing door frame in the partition using 47.62x44.45mm section thickness 3.18mm, weight 1.505kg/m for vertical frame; 47.62x44.45 thickness of 3mm, weight 1.42kg/m for top section, 49.91mmx44.45mm with wall thickness 3mm, weight 1.495kg/m for central rail; and 114.3mmx44.45mm thickness 3.18mm, weight 2.646kg/m for bottom rail; aluminium sections anodized 12 to 15 microns and cut to length joint metred and corners grinded, the bottom rail and top rail hinged or pivoted, opening arrangements including providing and fixing standard approved accessories, such as aluminium handles, tower bolts, lock, pivots: hinges PVC or rubber gasket, 12mm prelaminated sheets (Novopan) exterior grade of approved colour both sides same colour for bottom panel of maximum height 0.90m and 5.5mm thick plain glass for top panel (Novopan) and glass fixed with glazed clips 19mmx17.3mmx11mm, 0.9mm thick, weight 0.124kg/m; aluminium sections treated for removal of any rust and prevention of further rust formation, and coated with greasy materials for non-adherence of mortars or any other sticky materials, including cost of materials, fixtures, labour and HOM of machinery complete as per specifications. 2)-do- using aluminium section powdered coated to a minimum of 60-70 microns with exterior durable pure polyester grade powder of approved quality.
15
-
65091.6
... More
Providing and applying painting in one coat with plastic emulsion paint of approved brand and manufacture on wall surface to give an even approved shade after thoroughly brushing the surface, free from mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour, complete as per specifications.
600
-
36288
... More
Providing and applying painting in one coat with plastic emulsion paint of approved brand and manufacture on ceiling surface to give an even approved shade after thoroughly brushing the surface, free from mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour, complete as per specifications.
380
-
24624
... More
Providing and finishing external walls in one coat with waterproof cement paint of approved brand and shade to give an even shade after thoroughly brooming the surface to remove all dirt and loose powdered material, free from mortar drops and other foreign matter cost of materials, labour, complete as per specifications. With primer
850
-
46818
... More
Supplying and fixing M.S. Rectangular poles made out of 2 equal angles of 65x65x6mm welded together and fixed in CC (1:2:4) WITH 2 NOS. 16mm dia M.S. hold fast rods each of length 25cms. including cost of all materials cutting, bending scaffolding wherever necessary, nicely finishing the welded joints with all lead lifts and as per the directions of the Engineer-in-charge of the work and including providing 2 coats of approved quality paint over one coat of shop painting(excluding cost of earthwork and concrete)
155
-
143796.6
... More
Providing chain link fencing 50mm size of 8 guage properly stretched between existing rectangular poles and fixed with suitable bolts and nuts, the free ends shall be welded to the pole and block pipe at top and bottom as required including cost of all materials, labour lead and lifts and as per the directions of the Engineer-in-charge of work including two coats of approved quality paint over one coat of shop paint.
270
-
208494
... More
Providing and fixing M.S. Block pipe of 38mm dia. of heavy guage of 14 including removing the bends, cutting the pipe and fixing pipe in between the existing two vertical poles (M.S. rectangular poles) and spot welding the chain link with M.S. block pipe including cost of all materials wastage in cutting and scaffolding wherever necessary with all lead and lift as directed by the Engineer-in-charge of work etc., complete including two coats of approved quality paint over one coat of shop paint.
300
-
132192
... More
ELECTRICAL WORKS Concealed conduit System : Supplying heavy gauge PVC conduit pipe……mm dia ........thick confirming to IS 2509 with suitable size bends, metal/ PVC junction boxes, adhesive paste etc., and running before concreating the slab . The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary. a) -do-25mm dia 2mm thick
1179
-
62487
... More
b) -do-32mm dia 2.5mm thick
100
-
8300
... More
Supplying heavy guage PVC conduit pipe……dia.....mm thick with suitable size bends, metal junction boxes, adhesives paste etc.,by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18SWG GI fish wire run throughout the conduit wherever necessary. a) -do-25mm dia 2mm thick
200
-
10800
... More
b) -do-32mm dia 2.5mm thick
50
-
4050
... More
Supplying and fixing PVC/metal conduit deep junction box . b) 25mm deep junction box
50
-
2350
... More
c) 32mm deep junction box
10
-
600
... More
Supplying and fixing Metal fan box with round hook.
12
-
1020
... More
Point wiring using copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 2x1.5 Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (conforming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood / PVC round block, complete for each outlet. Short point up to 3Mtr from tapping point to out let via switch box
4
-
640
... More
Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch box
13
-
3250
... More
Long point above 6Mtr up to 10Mtr from tapping point to out let via switch box.
15
-
5625
... More
Three outlet in a row, above 6Mtr up to 10Mtr from tapping point to out let via switches box.
10
-
6750
... More
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694: confirming to latest amendments. 1.5 sqmm
1000
-
20500
... More
2.5 sqmm
800
-
25600
... More
4 sqmm
900
-
40500
... More
6 sqmm
500
-
35000
... More
SWITCHES, SOCKETS & ACCESSORIES Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1-3 Way
20
-
1900
... More
4-5 Way
5
-
525
... More
6 Way
10
-
1250
... More
8 Way
30
-
4350
... More
10-12 Way
15
-
2475
... More
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc.,complete on the existing metal/ PVC box. 1 to 3 Module
20
-
2200
... More
4 Module
5
-
625
... More
6 Module
10
-
1750
... More
8 Module
30
-
6000
... More
12 Module
15
-
3450
... More
Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6 Amps one way
125
-
8750
... More
6Amps 3way socket.
50
-
4750
... More
Stepped fan regulator
13
-
3770
... More
16Amps one way switch
50
-
5750
... More
6/16Amps universal socket
50
-
8100
... More
TV/ Telephone socket
10
-
790
... More
Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB'S single phase / 3 phase / single door with powder coated painting. Made out of 14 SWG MS Enclosure, II - Double Door 12 Way SP & N
2
-
3600
... More
III - Double Door 4 Way TP & N
2
-
5300
... More
L.T. U.G. CABLES: Supplying, fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc., using 40mm dia. 2.9mm thick 2.5 mtr. long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode. The funnel should be enclosed in a CC chamber of 400x400x400mm with a cast iron cover. The earth electrode shall have staggered holes of 12mm dia and the electrode should be covered 150mm all-round with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts.
3
-
12450
... More
Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas/spacers etc., 1) 8 SWG Copper wire
50
-
5250
... More
Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5% and resistivity 14 Ohms/Kms (Max) as per IS-3975. a) 3.5 core 95 sqmm
90
-
43650
... More
Labour charges for laying of 1.1 KV class UG cable in the existing trench GI pipe / stoneware pipe / on wall / on pole as required.In existing trench/duct. a) 95 sqmm to 150 sqmm
80
-
1680
... More
On wall / Structure. a) 95 sqmm to 150 sqmm
10
-
400
... More
Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc., complete. In soil (ordinary)
80
-
6080
... More
Supplying and Drawing PVC flexible one pair telephone unarmoured tinned copper cable. 2 Pair
150
-
2175
... More
5 Pair
50
-
2400
... More
FANS & AIR CONDITIONERS: Supplying of 1440 rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50 Hz, AC Supply complete. a) 12" Sweep (300mm)
5
-
10500
... More
Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/79 and also comply with IS:1709/1984 with latest amendment, Rated voltage 220V/ 50Hz, Rated power input 48W +/- 10%, Rated power factor 0.9 lagging (min), Rated speed 350 +/- 10% RPM, Rated air delivery 210 +/- 10% Cubic Meter Minimum, Rated service value ≥ 4.2 CMM /Watt, Three Blades of blade leaf 1.05mm thick Aluminium Alloy sheet, Class B motor insulation, Bearing Two ball bearings, Top 6202, Bottom 6201, as per IS specification, Motor wdg. Temp rise shall not exceed 75 deg C over and ambient of 40 0C by resistance method at 245 volts, Insulation resistance shall not be less than Two Mega Ohms (2 M Ohms), Leakage current should not exceed 210 Micro Amp, Power input, watt & current, Air current, Air Delivery & Fan Speed as per IS:374/1979 with latest amendment, 2 year manufacturer Warranty. 48" Sweep 5 Star (1200mm)
13
-
37700
... More
UPS, BATTERIES: Supplying, erecting, testing and commissioning of ON / OFF-LINE UPS System suitable for operation on 230V, 50Hz, A/C supply with all accessories complete and excluding batteries and wiring complete. 5 KVA ON LINE UPS One Hour back up. Excluding 6x 80Ah batteries.
1
-
74250
... More
Supplying, installation, testing and commissioning of 12V DC, AH batteries in poly propylene container for U.P.S. sealed maintenance free batteries. a) 75/80 AH capacity
8
-
69600
... More
LED INDOOR: Supplying of ……. feet –PVC Batten with integrated LED tube …….. W with high quality diffuser with Life of 25000 burning hours and 70% lumen maintenance with CRI > 80. Power Input : 220 – 240V @ 50/60Hz and Power factor > 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. a) LED light fitting 2' - 14 watts
2
-
500
... More
b) LED light fitting 4' - 28 watts
40
-
15000
... More
Supply of round / square recess / surface mounted rolling type LED Down light with ……W GU 10 LED Lamp Rib Fabricated form Die cast aluminium with white powder coated prewired to mains connector and has swiveling unit of aluminium die cast eye ball and LED lamp position retained by circular wire spring, with Life of 25000 burning hours and 70% lumen maintenance with CRI > 80. Power Input : 220-240V @ 50/60Hz and Power factor > 0.9 along with CE approved. 2 years Warrants against any manufacturing defect working under standard electrical condition. a) LED square or round down light 15-18W
20
-
23000
... More
Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti clear diffuser with Injection moulded polycarbonate/clear glass material, delivering superior light output. Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%. CCT > 5500K, IP 66optical and electrical compartment & impact resistance of complete luminaire > IK08. Power Factor >0.9 with mains, Surge Protection- Min 5KV along with Over voltage / Overload, short circuit/ miss-wiring protection. Compatible for pole mouting with outer dia of 40mm to 50mm.Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/ IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ………. W System Power consumption. LED Efficiency > 130lm/w, nominal CRI > 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier work mark / name shall be Engraved / embossing on the die cast housing / Body part. Warranty of 2 years against any manufacturing defect working under standard electrical conditions as mentioned above should be give by LED manufacturer & Cree / Nichia / Lumileds / Osram make LED Source. LED Floodlight 120Watts
2
-
17600
... More
Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/ 0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps. On wall / ceiling / Rafters / Girders
60
-
6600
... More
Fixing a ceiling/wall mounting fan of all capacities and all types to the existing 'S' hook with fan regulator to the existing board together with supplying and fixing 5 amps ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated twin twisted copper wire and wiring.
13
-
1950
... More
Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose with sufficient length of 23/ 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame.
5
-
3250
... More
Fabricating supplying and mounting MS box made out ….. SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 1ith 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., complete. 4SWG
60000
-
24000
... More
Supplying 250 Amps 4x30x10mm Aluminium strips amps rated 3 phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic / FRP/DMC insulator which are mounted on powder coated 40x6mm M.S. flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. 100Amps 4x30x6mm Alluminium Strips
2
-
4100
... More
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440v A.C. 50 Hz 12/24v D.C.
3
-
1290
... More
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood / panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit with thermal Magnetic / Micro processor release and Earth Fault as per IS-13947. (lcu = lcs) Four pole 100Amps 25kA,
3
-
19200
... More
125 amps 25 Ka
1
-
8250
... More
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and ‘C’ Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32Amps, DP
5
-
4545
... More
6-32Amps, TPN
6
-
10290
... More
50-63Amps, TPN
2
-
4794
... More
Supplying and drawing UTP-CAT 6E LAN cable.
800
-
23200
... More
Supplying and fixing of I/O socket with back box a)Single I/O
10
-
3300
... More
Supplying of … TR Invertor type split Air conditioners suitable for operation on A/C supply single phase 50 Hz 230 volts with hermetically sealed inverter compressor with air cooled condenser, latest R410A / R-32 refrigerant fan motor, start and run capacitor, relay and over load protector internal unit, with one indoor and one outdoor unit. The condenser unit will be placed outside the room avoid noise including standard length of suitable size copper tubing covered with nitrile rubber insulation tube, suitable capacity 3 core sheathed / PVC copper cable and a battery operated wireless remote unit. 5 Star a) 1 ton capacity
4
-
264000
... More
Installation charges for 1 to 2 Ton capacity window type Air Conditioner with 50 x 75mm thick teak wood frame of sutiable size and allied works complete.
4
-
6960
... More
Supplying and installation of insulated refrigerant copper tubing of 5/8” and 3/8” with polythene foam insulation 3 core 80 stand copper wiring between indoor and outdoor unit. Leak testing oil and gas charging for additional piping length of tube.a) Split
12
-
13860
... More
Supplying, erecting, testing and commissioning of voltage stabilizer suitable for 170 to 270 v in put and load variation from no load to full load, with over load protection, spike suppression, operating at 00 C to 400 C, Range etc., complete.a) 4 KVA Capacity
4
-
16720
... More
Extra for Fabrication supply and fixing of stand fabricated using slotted angle of size 6mm x50mm for mounting out door / indoor A.C. unit / Batteries.
4
-
8860
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements