University Of Agricultural Sciences Tender

ITEM4 - Supplying PVC flexible conduit pipe…. Mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamed using heavy gauge saddles at an intervals of 300 mm using NF screws on the eirth end of the pipe terminated completely. (Page no- 3 Item no-1. 9) 2023-24 a) 25mm

ITEM5 - Supplying and wiring adopting loop system in existing PVC conduit / casing capping using 2x1.5Sq.mm (Phase & Neutral) &1x10 sqmm (Earth wire) FRLS multi strad PVC insuated copper wire (Confirming to IS-694: and latest amendments) without control switch shll be fixed on the existing plastic sheet/gang box, the other end of the wires shall be terminated with sufficient loose length in a wood / PVC round block. complete for each outlet (Page no.-5 . Item no.-2.2) 2023-24 Short point upto 3m from tapping point to out let via switch box (Page no.-5 . Item no.-2.2.1)

ITEM6 - Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch box (Page no.-5 . Item no.-2.2.2)

ITEM7 - Long point above 6Mtr upto 10Mtr from tapping point to out let via switch box (Page no.-5. Item no.-2.2.3)

ITEM8 - Wiring for lighting/power circuit using one of FRLS PVC insulated 110 V grade, Multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:2010. ( Page no.-5 . Item no.-2.3.) 2023-24 a) 1.5 sqmm

ITEM9 - 2.5 sqmm

ITEM10 - 4 sqmm

ITEM11 - 6 sqmm

ITEM12 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate. IS 3854 and IS 1293 (Page no.09 Item no. 3.6) 2023-24 a) 6A one way Switch

ITEM13 - 6A 3way socket

ITEM14 - Stepped Fan Regulator Two Module

ITEM15 - 6/16A universal socket

ITEM16 - 32A DP switch

ITEM17 - Supplyimg and fixing regular MCB distribution boards on wall ood board / flush mounting using required clamps, bolts, nuts etc., with provission for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14SWG MS enclosed. (Page No- 17 . Item No-5.19) 2023-24 III - Double Door 12 Way TP & N

ITEM18 - Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'c' type cirve, indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10 K and complete wiring as required confirming to IEC 69898 (Page No- 17 . Item No-5.18) 2023-24 a) 6-32A SP

ITEM19 - 40 A TPN

ITEM20 - Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded poly carbonate material, delivering superior light output Rated life Burning Hrs50000 hr at Lumen Maintenance of 70 present, maximum light intensity should be between 60 degrees to 70 degrees. CCT 5500 K, IP66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection-Min 5KV along with Over voltage Overload, short circuit miss wiring protection. Compatible for pole mounting with outer dia of 40 mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270 V50 60 Hzapplication. Compliance to IS10322 IEC 60598, LM 79 and LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with W System Power consumption. LED Efficiency 1301 mw, nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL CPRI and any Government certified agency and Design Development facility certified by ISO9001: 2008. Housing with supplier word mark name shall be Engraved Embossing on the die cast housing Body part. Warrantyof 2Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree Nichia Lumileds Osram make LED Source. LED Streetlight 70W

ITEM21 - Fixing all types and all capacities of fluorescent /false ceiling /spotlight /CFL /LED fittings indoor on the wall /ceiling /rafters /girders using 23/ 0.0076 "twin twisted PVC insulated wires, required Nos of round blocks and clamps. (Page no.-56 Item no.-13.7) 2023-24 On wall / ceiling / Rafter / Girders

ITEM22 - 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 (Bescom 11Kv Page no.-13 Item No-32.13) ESCOM 2023-24 70 Sqmm, 3.5 Core, (18 GI Strips - 4 x 0.8 mm)

ITEM23 - Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required.(Page no.-68. Item No-7.8) 2014-15 In existing trench/duct. A) 25 sqmm to 75 sqmm

ITEM24 - Supplying of ..... feet - PVC Batten with integrated LED tube ....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input : 220-240V @ 50/ 60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. (Page no.-43. Item No-11.3.2) 2023-24 LED light fitting 1 x 4' - 20/22

ITEM25 - Rod Earthing: Rod type of earthing using 40 mm Dia, 3 Mtr long MS rod as ground rod, in earth pit of 300 mm width and 3300 mm depth and using 50x6 mm flat welded to ground rod as terminal & connected to equipment ground terminal using PVC Al wire as specified (Page no 23.-. Item No-51.04) ESCOME 2023-24

ITEM26 - Supplying of 1440 rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. (Page no30.-. Item No-6.2.) 2023-24 12" Sweep (300mm)

ITEM27 - Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopiesetc, for operation on 230V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system. (Page no.-30. Item No-6.3) 2023-24 48" Sweep (1200mm) Regular model

ITEM28 - Supplying and Fixing........ mm dia clampsss A GI pipe bracket upto 2.7 meters long terminated with a reducing collar of 40x25 mm to which extra pipe of 175 mm length is fixed for fixing MV /SV /MH /FTL streetlight fitting of all capacities on rail /RCC /wall /tubular pole, using suitable clamps, bolts, nuts and wiring using suitable capacity wires.(Page no.56 Item no.13.2.2) 2023-24 Using 32mm dia G.I.Pipe

ITEM29 - Fixing a ceiling /Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board to gether with supplying and fixing 5A. ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated twin twisted copper wire and wiring. (Page no.57 Item no.13.10) 2023-24

ITEM30 - Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5A. Ceiling rose with sufficient length of 23 /0.0076 inch PVC insulated twin core wire. (Page no.57 Item no.13.14) 2023-24

ITEM31 - Supply of round/square recess/surface mounted rolling type LED Down light with W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has swivelling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @50/60Hz & Power factor 0.9 along with CE approved. 2years Warranty against any manufacturing defect working under standard electrical condition (Page no.44 Item no.11.5) 2023-24 LED square or round down light 15-18W

ITEM32 - Supplying of recess mounting non integral type LED w luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceiling clamps, Power LEDs with CCT 6500 degree K, CRI 70%. efficacy 100 lumen per W, 120degree beam spread, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level LEDs are driven by HF electronic driver integrated in a separate control gear assembly., with PF 0.95, power loss should 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. (Page no.44 Item no.11.6) 2023-24 LED modular down light 1'x4' 34-36W

ITEM33 - Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall (Page no.8 Item no.3.4) 2023-24 3 Way

ITEM34 - 6 Way

ITEM35 - 8 Way

ITEM36 - 16 Way

ITEM37 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. (Page no.8 Item no.3.5) 2023-24 3 Module

ITEM38 - 6 Module

ITEM39 - 8 Module

ITEM40 - 16 Module

ITEM41 - Supplying of Switch disconnector fuse unit (TPN) HRC type (but without HRC fuses). With AC-23A duty and as per IS- 13947. (Page no.15 Item no.5.8) 2023-24 a) 63 A

ITEM42 - 160 A

ITEM43 - Supplying and fixing HRC fuse units base on existing switch / panel board. (Page no.15 Item no.5.9) 2023-24 32 to 63 A

ITEM44 - 100 to 300 A

ITEM45 - Supplying and fixing HRC fuse link on existing switch fuse base with W loss as per IS-13703. (Page no.15 Item no.5.10) 2023-24 upto 63 A

ITEM46 - Above 63 A to 200 A

ITEM47 - Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. With all accessories. (SM Enclosure Sheet Metal Execution). (Page no.15 Item no.5.12) 2023-24 200 A

ITEM48 - Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuitwith adjustable thermal magnetic release, Micro processor release shall have Earth Fault as per IS/IEC 60947-2 . (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. (Page no.15 Item no.5.15) 2023-24 FOUR Pole 160 A 25 kA

ITEM49 - Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. (Page no.20 Item no.5.41) 2023-24 a) 75 x 75 x 6 mm

ITEM50 - Supplying A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete (Page no.20 Item no.5.40) 2023-24 a) 250 A 4 x 30 x 10 mm Aluminium Strips

ITEM51 - Fabricating supplying and mounting MS box made out SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete.(Page no.20 Item no.5.42) 2023-24 a) 16 SWG

ITEM52 - Supplying, fixing and wiring 0 to 600V 96x96mm AC Voltmeter on existing panel/wood board. (Page no.18 Item no.5.22) 2023-24

ITEM53 - Supplying, fixing and wiring 0 to 100 A Direct Reading AC analog type Ammeter (Page no.18 Item no.5.25) 2023-24

ITEM54 - Supplying, fixing and wiring rotary selector switch suitable for Ammeter (Page no.19 Item no.5.27) 2023-24

ITEM55 - Supplying, fixing and wiring rotary selector switch suitable for Voltmeter (Page no.19 Item no.5.28) 2023-24

ITEM56 - Supplying, fixing and wiring 3 Phase Digital Ammeter / Voltmeter (Page no.19 Item no.5.29) 2023-24

ITEM57 - Supplying and fixing Electronic Trivector Meter (ETV) suitable for operation LT operation and -CT operated meter in polycarbonate body in class 0.5 accuracy as per IS 14697 and completely wired. (Page no.19 Item no.5.33) 2023-24

ITEM58 - Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. (Page no.19 Item no.5.38) 2023-24