University Of Agricultural Sciences Tender

c) -do-10 Sqmm

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick / Stone/ C.C. wall. a) -do-1-3 way

b) -do-4-5 way

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts, nuts etc., complete on the existing metal / PVC Box. a) -do- 1 to 3 Module

b) -do- 4 Module

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. a) -do- 6 Amps one way Switch

b) -do- 6 Amps 3 way socket

Supplying and fixing regular MCB distribution boards on wall /wood board/flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB’s single phase / 3 Phase/single door with powder coated painting. Made out of 14 SWG MS enclosure. (P/I-27/5.18).(III – Double Door) -do- 8 Way TP & N

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and ‘C’ Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. a) -do- 6-32 Amps DP

b) -do-50-63 Amps TPN

Supplying, fixing and wiring earth leakage Miniature circuit Breaker (ELMCB) 240/450V upto 300mA sensitivity one existing wood /panel board. -do- 63 Amps 4 pole

ELEVATORS/LIFTS: Design, supplying, errecting testing and commissioning of passenger /Bed-cum-passenger hospital lift with speed of 1 mtr per second, variable voltage, variable frequency drive, without machine room SS finish for the available well size, operating at 415 V three phase 50 cycle AC supply, powder coated or stainless steel car entrance door enclosures with suitable colour vinyl flooring, LED car illumination, emergency light, intercom and fan as desired by the user, central opening / side opening door with or without attendant operation, 7 segment display buttons, call register indicator, fireman drive, SS handrails inside car, full length infrared curtain in car door, automatic rescue device with batteries, voice announcing in regional / international language, Braille buttons with one year warranty and maintenance with necessary scaffolding and minor civil works like fixing of guide rail, counter weight etc., The total product and services shall adhere to IS 14665/2016 (with latest amendments) part/section 1 to 5 with regards to general guidelines of ire safety rated doors. MRLL beams, pressure switch, manual change over for doors during emergency, ARD of 10 times with sufficient battery backup and standard dimensions of chair car and door openings for all sizes and capacities of lifts including fitness certificate and duly observing all other safety norms prescribed and adhere to CPWD specifications, PCB Norms, National Electricity Code (NEC), NBC-2016 IEC and Karnataka State Lifts, Escalators and passengers conveyers Act 2012 and Rules 2014. The supplier shall be registered in Government Electrical inspectorate in the state of Karnataka without machine room – SS finish. -do-8 Passengers 3 Stops.

Supply of round/square recess/surface mounted rolling type LED Down light with LED Square or round down light 5-6W GU to LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prerwired to mains connector & has swiveling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with life of 25000 burning hours & 70% lumen maintenance with CRI>80. Power Input 220-240V @ 50/60 Hz & power factor >0.9 along with CE approved 2 years Warranty against any manufacturing defect working under standard electrical condition. -do- LED square or round down light. 5-6W

Fixing all types and all capacities of fluorescent/false ceiling /spot light/CFL/LED fittings indoor on the wall/ceiling/rafters/girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps. -do- On wall/ceiling/Rafter/Girders

Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode. The funnel should be enclosed in a CC chamber of 400x400x400mm with a cast iron cover. The earth electrode shall have staggered holes of 12mm dia and the electrode should be covered 150mm all-round with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts.

Supplying and running of GI / copper strips for grounding connections, using necessary fixing materials as required. a) -do- 25x6mm Copper Strip

b) -do- 600x600x3mm Copper plate