Tourism Department Tender

004 - Providing and fixing 25mm diameter steel anchor dowel in hard rock including drilling hole of 32 mm diameter up to 0.75 mtrs depth placing the dowel in position and effectively grouting the hole with CM 1 by 1 proportion etc. complete as per specifications and as per directions of the Engineer in Charge

005 - Providing and fixing 25mm diameter steel anchor dowel in hard rock including drilling hole of 32 mm diameter up to 0.75 mtrs depth placing the dowel in position and effectively grouting the hole with CM 1 by 1 proportion etc. complete as per specifications and as per directions of the Engineer in Charge

006 - Providing and laying in position Reinforced cement concrete for all Foundation works. The graniteortraporbasalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. The cost of steel reinforcement and formwork to be paid separately M25 Design Mix Using 20 mm nominal size graded crushed coarseaggregates. complete as per specifications and as per directions of the Engineer in Charge

007 - Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works and other parallel works from 0.50m to 3.50 m height. The graniteortraporbasalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead and lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. The cost of steel reinforcement and formwork to be paid separately M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. complete as per specifications and as per directions of the Engineer in Charge

008 - Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The graniteor traporbasalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. The cost of steel reinforcement, dowel bars and formwork to be paid separately M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. complete as per specifications and as per directions of the Engineer in Charge

009 - Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The graniteor traporbasalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. The cost of steel reinforcement, dowel bars and formwork to be paid separately M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. complete as per specifications and as per directions of the Engineer in Charge

0010 - Supplying, fitting and placing TMT FE 550 or 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, lapingorwelding joints, tying with binding wire or soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. complete as per specifications and as per directions of the Engineer in Charge

0011 - Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm average thick base of cement mortar 1 is to 4 1 cement and: 4 coarse sand laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer in Charge

0012 - Filling available excavated earth excluding rock in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. complete as per specifications and as per directions of the Engineer in Charge

0013 - Providing and fixing stainless steel Grade 304 railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature wherever required and fitting the same with necessary stainless steel nuts and bolts complete, iorc fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor orthe side of waist slab with suitable arrangement as per approval of Engineer in charge, for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts,bolts, fasteners etc. including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer in Charge

0014 - Fabricating, supplying and erection of ms long hot dip Galvanized Octagonal hot dip Pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, including suitable boards, Bakelite sheet and MCBs as per IS specifications suitable to withstand the wind speed of 47 ms for m Pole in single section and single joint welded as per IS 9595 or IS10178AWS having dimensions bottom mm top mm with 3 mm thick, suitable base plate and 4Nos of long J bolts along with template and the Pole shall be hot dip galvanized in single dipping with not less than 65micron as per ASTM A123 and 153 etc excluding foundation as per drawing appended. complete as per specifications and as per directions of the Engineer in Charge

0015 - Supply of LED pole mounting type post top lantern with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate clear glass material, delivering superior light outputRated life Burning Hrs 50000 hr Lumen Maintenance of 70percent, CCT greater than 5500K, IP 66 optical and electrical compartment and impact resistance of complete luminaire greater than IK08. Power Factorgreater than0.9 with mains, Surge ProtectionMin 5KV along with Over voltage or Overload, short circuitor miss wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50or60Hz application. Compliance to IS 10322or1 EC 60598 LM 79 and LM 80 Adherence with RoHS. UL approved MCPCB LED Efficiencygreater than1301morw, nominal CRI greater than75. Luminaire manufacturer should have in house facility accredited by NABL or CPRI and any Government certified agency and Design and Development facility certified by ISO 9001 2008. Housing with supplier word mark orname shall be Engraved or Embossing on the die cast housingor Body part Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer and CreeorNichiaor Lumileds or Osram make LED Source. complete as per specifications and as per directions of the Engineer in Charge

0016 - Fabrication, Supplying, Erection, Testing and Commissioning of ms long Polygon high mast with Single or Multiple telescopic sections having, minimum overlap distance of 1.5 times of top section thickness as per BSEN 10025 grades 355 JO or ASTM A572 50 steel sheet plate for shaft suitable to withstand a wind velocity of 47 m or s as per IS 875 part 3 as per GA Drawing. Base plate as per IS 2062 or ASTM A572 50. The mast shall be Galvanized in single Hotdipas per BSEN ISO 1461 or ASTM A123 with an average 70 microns as per IS 2629 and welded as per BS 5135 Single L Seam joint The mast shall have 2 Way head frame with die cast LM 6 pulleys, stainless steel axle, Phosphorus Bronze bearing bush press-fitted with separate guides for 2 runs of 5 mm dia, stainless steel wire rope of AISI 304grade 7 or 19 core, Factor of Safety as per TR no 7. 2.5 mm2 EPR insulated PCP sheathed trailing power cable housed inside the bottom shaft of mast with door having locking arrangement The mast shall have manual or power tool Suitable reversible geared motor operating on 230 or 415V, 50Hz, shall be provide above 15 Mtr mast The mast shall have lantern of 2 segments, suitable dia with max load carrying capacity as per IS 1239. The mast shall be erected on existing RCC footing. The mast shall be supplied with 3 mm thick template, lightning arrester of 1.2m length galvanized pipe with top arrow fitted on top of the head frame cover and GLS type aviation twin l A fitting with wiring complete. excluding foundation as per technical data. complete as per specifications and as per directions of the Engineer in Charge

0017 - Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate orclear glass material, delivering superior light output Rated life Burning Hrs 50000 hr percent Lumen Maintenance of 70 percent, CCT greater than 5500K, IP 66 optical and electrical compartment and impact resistance of complete luminaire greater than IK08. Power Factor greater than0.9 with mains, Surge Protection Min 5KV along with Over voltage or Overload, short circuit or miss wiring protection. Compatible for pole mauling with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100 V to 270V 50 or60Hz application. Compliance to IS 10322 or IEC 60598, LM 79 and LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with W System Power consumption. LED Efficiency greater than 1301m orw, nominal CRI greater than75. Luminaire manufacturer should have in- house facility accredited by NABL or CPRI and any Government certified agency and Design and Development facility certified by ISO 9001 2008. Housing with supplier word mark or name shall be Engraved or Embossing on the die cast housing or Body part Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer and Cree orNichia or Lumileds or Osram make LED Source. complete as per specifications and as per directions of the Engineer in Charge

0018 - Fixing charges of post top or Gateor Garden fitting or LED on the existing CI or GI or any other pipe using required size of reducer, wiring using suitable wires. complete as per specifications and as per directions of the Engineer in Charge

0019 - Wiring for lighting or power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694 2010 complete as per specifications and as per directions of the Engineer in Charge

0020 - Wiring for lighting or power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694 2010 complete as per specifications and as per directions of the Engineer in Charge

0021 - 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS 1554 Part 1 or IS 7098 Part 1 Armouring strip thickness and resistivity as per IS 3975 complete as per specifications and as per directions of the Engineer in Charge

0022 - Supplying and fixing of class B medium duty GI pipe of wall thickness not less than 3.25mm on pole or wall or drain crossing with necessary clamping arrangements for UG cable of 1.1 KV as per IS 1239. complete as per specifications and as per directions of the Engineer in Charge

0023 - Laying of cable in Existing Trench or GI pipe or Stone Ware or RCC Hume pipe using Woodenor Aluminium Rollers as directed by the departmental staff

0024 - Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150 mm all round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nuts etc the pipe shall have 16 through holes of 12 mm dia

0025 - Supplying and fixing regular MCCB distribution Panel confirming to IS or IEC 61439 3 and IK09 tested as per IS or IEC 62262 with minimum IP43 protection provided with Polyurethane PUR gasket, with suitable earthing system, on wall or wood board or flush mounting using required cl A , bolts, nuts, etc with provision for fixing of suitable type capacity MCCBs as an incomer for 3 phase Double door with necessary bus bar completely wired to use on 440V 3phase 4 wire powder coated painting etc complete with a provision for fixing of single three phase suitable capacity MCB's as outgoings confirming to IS or IEC 60898 2.

0026 - Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood or panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit with adjustable thermal magnetic release, Micro processor release shall have Earth Fault as per IS or IEC 60947 2 In 4P MCCB, all Poles should have protection for Short Cicrcuit or Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open. Multi pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism.

0027 - Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood or panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit with adjustable thermal magnetic release, Micro processor release shall have Earth Fault as per IS or IEC 60947 2 In 4P MCCB, all Poles should have protection for Short Cicrcuit or Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open. Multi pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism.

0028 - Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers.

0029 - Supply and fixing of 4pole power contactor with NO or NC contacts on existing wood or panel board using necessary bolts, nuts, washers and wiring etc. complete with AC 3 Rating and as per IS 13947.

0030 - Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite or trap or basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1 3 6 Using 20 mm nominal size graded crushed coarse aggregates

0031 - Providing and fixing stainless steel Grade 304 railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature wherever required and fitting the same with necessary stainless steel nuts and bolts complete, iorc fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor orthe side of waist slab with suitable arrangement as per approval of Engineer in charge, for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts,bolts, fasteners etc. including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer in Charge

0032 - Supplying, fitting and placing TMT FE 550 or 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping or welding joints, tying with binding wire or soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.

0033 - Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, excavated surface leveled and sides neatly dressed disposing off or leveling the excavated stuff or sorting and stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage & other appurtenances required to complete the work. complete as per specifications and as per directions of the Engineer in Charge

0034 - Fixing halogen/metal halide or SVL ofr IL or LED floodlight fitting over existing pole or wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. complete as per specifications and as per directions of the Engineer in Charge