Tool Room And Training Centre Tender
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
Costs
EMD
₹ 21,18,000Document Cost
Refer DocumentsTender Fee
₹ 7,500
Summary
Establishment Of Gttc Multi-skill Development Centre
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
GTTC/2024-25/BD/WORK_INDENT15Tender No
GTTC/2024-25/BD/WORK_INDENT15Tender Authority
Tool Room And Training Centre ViewPurchaser Address
-Website
http://kppp.karnataka.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
I04 - Earth work excavation for Foundation by mechanical means for all works and depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting and stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery and other appurtenaces required to complete the work In ordinary soft rock without blasting Depth exceeding 1.5 m, but not exceeding 3 m.
2571.74
446
1147638.975
... More
I05 - Earth work excavation for Foundation by mechanical means for all works and depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting and stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery and other appurtenaces required to complete the work .Hard rock blasting prohibited Depth exceeding 1.5 m, but not exceeding 3 m.
285.71
1176
335994.96
... More
I06 - Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings and bridges and such simillar works in all kinds of soils, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sidesneatly dressed disposing off the excavated stuff or sorting and stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools and other appurtenaces required to complete the work.In all kinds of soils Depth upto 1.5 m
938.67
254
238516.047
... More
I07 - Providing and injecting chemical emulsion for Pre constructional Anti Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. Lindane 20% E.C. @ 3.19 l m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications.
8960.75
123
1110236.925
... More
I08 - Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead and lifts, cost of all materials of quality, labour, Usage charges of
machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates .Ground Floor
1071.41
6527
6994003.7685
... More
I09 - Addendum I Percentage Additionalities for Formwork, Centering and Scaffolding.Percentage on finished rate of concrete per m3.FOUNDATION UP TO PLINTH=8% OF CONCRETE QNTY. Ground Floor
952.28
532
506822.4616
... More
I10 - Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for foundations, footings, bases of columns for mass concrete including cost of all materials, labour complete as per specifications.FOUNDATION UP TO PLINTH=8% OF CONCRETE QNTY
5.63
574
3236.1803
... More
I11 - Addendum I Percentage Additionalities for Formwork, Centering and Scaffolding.Percentage on finished rate of concrete per m3. PLINTH BEAMS =50% OF CONCRETE QNTY.
260.15
3326
865362.96
... More
I12 - Addendum I Percentage Additionalities for Formwork, Centering and Scaffolding.Percentage on finished rate of concrete per m3 COLUMNS=70% OF CONCRETE QNTY. Ground Floor
290.55
5029
1461353.1855
... More
I13 - Addendum I Percentage Additionalities for Formwork, Centering and Scaffolding.Percentage on finished rate of concrete per m3 COLUMNS=70% OF CONCRETE QNTY. First Floor
140.51
5079
713776.749
... More
I14 - Addendum I Percentage Additionalities for Formwork, Centering and Scaffolding.Percentage on finished rate of concrete per m3 COLUMNS=70% OF CONCRETE QNTY. Terrace Floor
32.39
5130
166183.373
... More
I15 - Addendum I Percentage Additionalities for Formwork, Centering and Scaffolding.Percentage on finished rate of concrete per m3.BEAMS AND LINTEL=60% OF CONCRETE QNTY. Ground Floor
601.14
4311
2591568.6426
... More
I16 - Addendum I Percentage Additionalities for Formwork, Centering and Scaffolding.Percentage on finished rate of concrete per m3.BEAMS AND LINTEL=60% OF CONCRETE QNTY. First Floor
435.04
4354
1894251.168
... More
I17 - Addendum I Percentage Additionalities for Formwork, Centering and Scaffolding.Percentage on finished rate of concrete per m3.BEAMS AND LINTEL=60% OF CONCRETE QNTY. Terrace Floor
25.93
4397
114033.3982
... More
I18 - Addendum I Percentage Additionalities for Formwork, Centering and Scaffolding.Percentage on finished rate of concrete per m3. for heights more than 3.50m from ground level.Roof Straight and Arched =50%. Ground Floor
732.9
3592
2633001.882
... More
I19 - Addendum I Percentage Additionalities for Formwork, Centering and Scaffolding.Percentage on finished rate of concrete per m3. for heights more than 3.50m from ground level.Roof Straight and Arched =50%. First Floor
416.15
3628
1510000.275
... More
I20 - Addendum I Percentage Additionalities for Formwork, Centering and Scaffolding.Percentage on finished rate of concrete per m3. for heights more than 3.50m from ground level.Roof Straight and Arched =50%. Terrace Floor
60.63
3664
222196.2177
... More
I21 - Addendum I Percentage Additionalities for Formwork, Centering and Scaffolding.Percentage on finished rate of concrete per m3.BEAMS AND LINTEL=60% OF CONCRETE QNTY. Ground Floor
29.86
4311
128729.1474
... More
I22 - Addendum I Percentage Additionalities for Formwork, Centering and Scaffolding.Percentage on finished rate of concrete per m3.BEAMS AND LINTEL=60% OF CONCRETE QNTY. First Floor
26.14
4354
113818.788
... More
I23 - Addendum I Percentage Additionalities for Formwork, Centering and Scaffolding.Percentage on finished rate of concrete per m3.BEAMS AND LINTEL=60% OF CONCRETE QNTY. Terrace Floor
9.85
4397
43317.739
... More
I24 - Addendum I Percentage Additionalities for Formwork, Centering and Scaffolding.Percentage on finished rate of concrete per m3. for Stairs excluding landing except spiral staircase including cost of all materials, labour complete as per specificaiton. Ground Floor
85.03
3592
305477.0774
... More
I25 - Addendum I Percentage Additionalities for Formwork, Centering and Scaffolding.Percentage on finished rate of concrete per m3. for Stairs excluding landing except spiral staircase including cost of all materials, labour complete as per specificaiton. First Floor
18.14
3628
65820.99
... More
I26 - Addendum I Percentage Additionalities for Formwork, Centering and Scaffolding.Percentage on finished rate of concrete per m3. chajja, corbels etc., including edges including cost of all materials, labour complete as per specificationsChejjas, Canopy and Other Architectural projections of minor sections=45%. Ground Floor
23.12
3132
72427.5616
... More
I27 - Addendum I Percentage Additionalities for Formwork, Centering and Scaffolding.Percentage on finished rate of concrete per m3. chajja, corbels etc., including edges including cost of all materials, labour complete as per specificationsChejjas, Canopy and Other Architectural projections of minor sections=45%. First Floor
5.13
3164
16231.32
... More
I28 - Addendum I Percentage Additionalities for Formwork, Centering and Scaffolding.Percentage on finished rate of concrete per m3. chajja, corbels etc., including edges including cost of all materials, labour complete as per specificationsChejjas, Canopy and Other Architectural projections of minor sections=45%. Terrace Floor
132.79
3195
424349.0356
... More
I29 - Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for vertical surface such as walls at any thickness, including attached pilasters, buttresses, plinth cills and string courses cost of all materials, labour complete as per specifications.RETAINING STRUCTURES=10% OF CONCRETE QNTY Ground Floor
14.89
718
10698.7628
... More
I30 - Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for vertical surface such as walls at any thickness, including attached pilasters, buttresses, plinth cills and string courses cost of all materials, labour complete as per specifications.RETAINING STRUCTURES=10% OF CONCRETE QNTY Terrace Floor
38.88
732
28494.7632
... More
I31 - Providing and laying in position Cement Concrete for all Foundation works. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finishedlayers, well compacted using needle vibrators, including all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.
1291.61
6652
8592823.008
... More
I32 - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical
specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Ground Floor
1679.87
7185
12070117.9305
... More
I33 - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical
specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. First Floor
1030.76
7257
7480225.32
... More
I34 - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical
specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Terrace Floor
95.86
7329
702612.5802
... More
I35 - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Ground Floor
1138.26
6961
7923996.99
... More
I36 - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. First Floor
154.93
7031
1089331.4216
... More
I37 - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Terrace Floor
165.73
7101
1176919.9939
... More
I38 - Supplying, fitting and placing TMT FE 550 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping welding joints, tying with binding wire soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Ground Floor
301.3
93929
28301063.805
... More
I39 - Supplying, fitting and placing TMT FE 550 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping welding joints, tying with binding wire soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. First Floor
134.15
94869
12726696.4725
... More
I40 - Supplying, fitting and placing TMT FE 550 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping welding joints, tying with binding wire soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.Terrace Floor
17.08
95817
1636568.7072
... More
I41 - Providing Size Stone masonry with hard stone in foundation and plinth with Cement mortar 1:6 1 cement : 6 coarse sand
111.37
6708
747120.0765
... More
I42 - Filling approved earth excluding rock in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
3911.27
454
1778258.9055
... More
I43 - Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg m3 and minimum compressive strength of 4.00 N mm2 conforming to IS 2185 Part I 2005 and constructed with CM 1:4 as per IS 2572:2005
including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. Ground Floor
4332.85
1375
5959835.175
... More
I44 - Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg m3 and minimum compressive strength of 4.00 N mm2 conforming to IS 2185 Part I 2005 and constructed with CM 1:4 as per IS 2572:2005
including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. First Floor
2254.54
1389
3132142.2404
... More
I45 - Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg m3 and minimum compressive strength of 4.00 N mm2 conforming to IS 2185 Part I 2005 and constructed with CM 1:4 as per IS 2572:2005
including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.Terrace Floor
506.05
1403
710064.0575
... More
I46 - Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg m3 and minimum compressive strength of 4.00 N mm2 conforming to IS 2185 Part I 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. Ground Floor
497.53
1159
576736.776
... More
I47 - Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg m3 and minimum compressive strength of 4.00 N mm2 conforming to IS 2185 Part I 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.First Floor
115.05
1170
134699.3895
... More
I48 - Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. length of mesh only be measured for paymentPlaster mesh 100mm wide Ground Floor
8568.54
46
395866.548
... More
I49 - Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. length of mesh only be measured for paymentPlaster mesh 100mm wideFirst Floor
5092.99
46
237638.9134
... More
I50 - Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. length of mesh only be measured for paymentPlaster mesh 100mm wideTerrace Floor
778.46
47
36688.8198
... More
I51 - Providing 12 mm cement plaster with cement mortar 1:6 1 cement: 6 fine sand including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer in charge.Ground Floor
9464.01
253
2394867.7305
... More
I52 - Providing 12 mm cement plaster with cement mortar 1:6 1 cement: 6 fine sand including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer in charge.First Floor
3446.22
255
880784.9076
... More
I53 - Providing 12 mm cement plaster with cement mortar 1:6 1 cement: 6 fine sand including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer in charge.Terrace Floor
274.5
258
70859.43
... More
I54 - Providing 6 mm cement plaster with cement mortar 1:3 1 cement : 3 fine sand on concrete surface ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer in charge.Ground Floor
4702.4
221
1041816.72
... More
I55 - Providing 6 mm cement plaster with cement mortar 1:3 1 cement : 3 fine sand on concrete surface ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer in charge.First Floor
2925.22
223
654576.4794
... More
I56 - Providing 6 mm cement plaster with cement mortar 1:3 1 cement : 3 fine sand on concrete surface ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer in charge.Terrace Floor
246.79
226
55774.54
... More
I57 - Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 1 cement: 6 fine sand including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer in charge. Ground Floor
2517.24
292
737425.458
... More
I58 - Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 1 cement: 6 fine sand including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer in charge. First Floor
2108.19
295
623771.2572
... More
I59 - Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 1 cement: 6 fine sand including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer in charge. Terrace Floor
2060.45
298
615744.878
... More
I60 - Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 1 cement : 5 coarse sand and a top layer 6 mm thick cement plaster with cement mortar 1:3 1 cement : 3 coarse sand finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer in charge.Ground Floor
1945.14
404
786322.845
... More
I61 - Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 1 cement : 5 coarse sand and a top layer 6 mm thick cement plaster with cement mortar 1:3 1 cement : 3 coarse sand finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer in charge.First Floor
1278.85
408
522141.6665
... More
I62 - Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 1 cement: 4 fine sand including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer in charge.Ground Floor
2246.13
309
695738.7675
... More
I63 - Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 1 cement: 4 fine sand including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer in charge.First Floor
556.96
312
174244.936
... More
I64 - Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge.Ground Floor
14166.41
105
1487473.05
... More
I65 - Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge.First Floor
6371.44
106
675691.212
... More
I66 - Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge.Terrace Floor
521.29
107
55835.3719
... More
I67 - Finishing walls with Acrylic Smooth exterior paint of required shade :New work Two coat applied @ 1.67 ltr 10 m² over and including priming coat of exterior primer applied @ 2.20 kg 10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer in charge.Ground Floor
4462.38
182
815276.826
... More
I68 - Finishing walls with Acrylic Smooth exterior paint of required shade :New work Two coat applied @ 1.67 ltr 10 m² over and including priming coat of exterior primer applied @ 2.20 kg 10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer in charge.First Floor
3387.04
184
625010.4912
... More
I69 - Finishing walls with Acrylic Smooth exterior paint of required shade :New work Two coat applied @ 1.67 ltr 10 m² over and including priming coat of exterior primer applied @ 2.20 kg 10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer in charge.Terrace Floor
2060.45
186
384006.0665
... More
I70 - Applying priming coats with primer of approved brand and manufacture, having low VOC Volatile Organic Compound content. With water thinnable cement primer on wall surface having VOC content less than 50 g L as per specifications and as per directions of Engineer in charge.Ground Floor
13128.23
55
730585.9995
... More
I71 - Applying priming coats with primer of approved brand and manufacture, having low VOC Volatile Organic Compound content. With water thinnable cement primer on wall surface having VOC content less than 50 g L as per specifications and as per directions of Engineer in charge.First Floor
6304.72
56
354388.3112
... More
I72 - Applying priming coats with primer of approved brand and manufacture, having low VOC Volatile Organic Compound content. With water thinnable cement primer on wall surface having VOC content less than 50 g L as per specifications and as per directions of Engineer in charge.Terrace Floor
521.29
56
29593.6333
... More
I73 - Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer in charge.Ground Floor
9464.01
133
1262025.7335
... More
I74 - Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer in charge.First Floor
3446.22
134
464136.9096
... More
I75 - Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer in charge.Terrace Floor
274.5
136
37340.235
... More
I76 - Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer in charge.Ground Floor
4702.4
133
627065.04
... More
I77 - Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer in charge.First Floor
2925.22
134
393968.6296
... More
I78 - Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer in charge.Terrace Floor
246.79
136
33570.8437
... More
I79 - Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm average thick base of cement mortar 1:4 1 cement : 4 coarse sand laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer in Charge :Flamed finish granite stone slab Black, Cat Eye, River Pink or equivalent. Ground Floor
1005.89
2589
2604550.977
... More
I80 - Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm average thick base of cement mortar 1:4 1 cement : 4 coarse sand laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer in Charge :Flamed finish granite stone slab Black, Cat Eye, River Pink or equivalent. First Floor
104.86
2615
274228.8234
... More
I81 - Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications.Ground Floor
57.84
5594
323580.096
... More
I82 - Providing and laying Polished Sadarahalli Grey Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 20 mm thick stone slab over 20 mm average thick base of cement mortar 1:4 1 cement : 4 coarse sand laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer in Charge. Ground Floor
718.6
2189
1573195.05
... More
I83 - Providing and laying Polished Sadarahalli Grey Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 20 mm thick stone slab over 20 mm average thick base of cement mortar 1:4 1 cement : 4 coarse sand laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer in Charge. First Floor
640
2211
1415129.6
... More
I84 - Providing and fixing 20mm thick gang saw water cut Lakared granite for cladding in CM 1:3 1 cement : 3 coarse sand proportion with a coat of rough plastering using CM 1:4 1 cement : 4 fine sand , cut to required shape, pattern with paper joints, finished with cement mortar using white cement and colour pigments to match the colour of slab making through jointing with sealant, grooves in joints including cost of curing etc., complete including cost and conveyance of all materials, mortar, labour for all items of work, usage charges of machinery etc., complete as per specification.Ground Floor
130.09
3787
492696.3615
... More
I85 - Providing and fixing 20mm thick gang saw water cut Lakared granite for cladding in CM 1:3 1 cement : 3 coarse sand proportion with a coat of rough plastering using CM 1:4 1 cement : 4 fine sand , cut to required shape, pattern with paper joints, finished with cement mortar using white cement and colour pigments to match the colour of slab making through jointing with sealant, grooves in joints including cost of curing etc., complete including cost and conveyance of all materials, mortar, labour for all items of work, usage charges of machinery etc., complete as per specification.First Floor
53.58
3825
204955.2876
... More
I86 - Providing half nosing for 20mm thick granite slab using required machinery including cost and conveyanceof all materials, labour for all items of work, HOM of equipment etc., complete as per specification.Ground Floor
1069.56
189
202146.84
... More
I87 - Providing half nosing for 20mm thick granite slab using required machinery including cost and conveyanceof all materials, labour for all items of work, HOM of equipment etc., complete as per specification.First Floor
747.26
189
141232.14
... More
I88 - Providing and laying Vitrified tiles in different sizes thickness to bespecified by manufacturer , with water absorption less than 0.08 % andconforming to I.S. 15622, of approved make, in all colours and shade, over 12 mm thick bed of cement mortar 1:3 1 cement: 3 coarse sand , jointing with grey cement slurry @ 3.3 kg m2 including grouting the joint with white cement and matching pigments etc. complete. Size of Tile 800x800 mm.Ground Floor
2023.16
1351
2733997.266
... More
I89 - Providing and laying Vitrified tiles in different sizes thickness to bespecified by manufacturer , with water absorption less than 0.08 % andconforming to I.S. 15622, of approved make, in all colours and shade, over 12 mm thick bed of cement mortar 1:3 1 cement: 3 coarse sand , jointing with grey cement slurry @ 3.3 kg m2 including grouting the joint with white cement and matching pigments etc. complete. Size of Tile 800x800 mm.First Floor
1918.13
1364
2617978.9118
... More
I90 - Providing and laying Vitrified tiles in different sizes thickness to bespecified by manufacturer , with water absorption less than 0.08 % andconforming to I.S. 15622, of approved make, in all colours and shade, over 12 mm thick bed of cement mortar 1:3 1 cement: 3 coarse sand , jointing with grey cement slurry @ 3.3 kg m2 including grouting the joint with white cement and matching pigments etc. complete. Size of Tile 800x800 mm.Terrace Floor
151.44
1378
208761.5544
... More
I91 - Providing and laying Ceramic glazed floor tiles of size 300x300 mm thickness to be specified by the manufacturer , of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White,
Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 1 Cement : 4 Coarse sand , jointing with grey cement slurry @ 3.3 kg m2 including pointing the joints with white cement and matching pigments etc., complete.Ground Floor
382.31
933
356867.2695
... More
I92 - Providing and laying Ceramic glazed floor tiles of size 300x300 mm thickness to be specified by the manufacturer , of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White,
Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 1 Cement : 4 Coarse sand , jointing with grey cement slurry @ 3.3 kg m2 including pointing the joints with white cement and matching pigments etc., complete.First Floor
76.42
942
72047.2476
... More
I93 - Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 1 cement : 4 coarse sand , joints treated with white cement, mixed with matching pigment, epoxy touch up, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of the slab upto 0.50 m2.Ground Floor
21.6
4206
90856.08
... More
I94 - Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 1 cement : 4 coarse sand , joints treated with white cement, mixed with matching pigment, epoxy touch up, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab over 0.50 m2Ground Floor
43.62
4133
180318.537
... More
I95 - Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 1 cement : 4 coarse sand , joints treated with white cement, mixed with matching pigment, epoxy touch up, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab over 0.50 m2First Floor
24.75
4175
103335.9525
... More
I96 - Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 thickness to be specified by the manufacturer , of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer in Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 1 cement : 3 coarse sand and jointing with grey cement slurry @ 3.3kg per m2, including pointing in white cement mixed with pigment of matching shade complete.Ground Floor
1501.39
1161
1743564.207
... More
I97 - Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 thickness to be specified by the manufacturer , of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer in Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 1 cement : 3 coarse sand and jointing with grey cement slurry @ 3.3kg per m2, including pointing in white cement mixed with pigment of matching shade complete.First Floor
261.84
1172
307114.7544
... More
I98 - Providing Teak wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves excluding cost of cement concrete and side clamps , but including cost of materials, labour, usage charges complete as per specifications.Ground Floor
0.94
247431
232585.563
... More
I99 - Providing and fixing in position fully panelled Teak wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. excluding cost of fixtures Ground Floor
24.12
9800
236392.884
... More
I100 - Polishing in high gloss matt finish melamine clear polish on wood work in required color wooden shade textureGround Floor
57.89
622
36045.2085
... More
I101 - Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves excluding cost of cement concrete and side clamps , but including cost of materials, labour, usage charges complete as per specifications.Ground Floor
2.96
103755
307117.02
... More
I102 - Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves excluding cost of cement concrete and side clamps , but including cost of materials, labour, usage charges complete as per specifications. First Floor
1.7
104793
178148.627
... More
I103 - Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves excluding cost of cement concrete and side clamps , but including cost of materials, labour, usage charges complete as per specifications.Terrace Floor
0.28
105841
29635.5472
... More
I104 - Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves excluding cost of cement concrete and side clamps , but including cost of materials, labour, usage charges complete as per specifications.Ground Floor
3.97
144977
575561.469
... More
I105 - Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves excluding cost of cement concrete and side clamps , but including cost of materials, labour, usage charges complete as per specifications.First Floor
0.18
146427
26356.9464
... More
I106 - Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets core veneer hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 part I 1991. from manufacturer complete as per spcification. do 40 mm thick both side TeakGround Floor
201.39
5208
1048839.12
... More
I107 - Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets core veneer hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 part I 1991. from manufacturer complete as per spcification. do 40 mm thick both side TeakFirst Floor
73.56
5260
386931.4848
... More
I108 - Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets core veneer hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 part I 1991. from manufacturer complete as per spcification. do 40 mm thick both side TeakTerrace Floor
8.64
5312
45901.5552
... More
I109 - Providing and fixing factory made single extruded WPC Wood Polymer Composite solid door window Clerestory windows and other Frames Chowkhat comprising of virgin PVC polymer of K value 58 60 Suspension Grade , calcium carbonate and natural fibres wood powder rice husk wheat husk and non toxic additives maximum toxicity index of 12 for 100 g fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg m3, screw withdrawal strength of 2200 N Face and 1100 N Edge , minimum compressive strength of 58 N mm2 , modulus of elasticity 900 N mm2 and resistance to spread of flame of Class A category with property of being termite borer proof, water moisture proof and fire retardant and fixed in position with M.S hold fast lugs SS dash fasteners of required dia and length complete as per direction of Engineer InCharge. Fixtures shall be paid for separately Size 62 x 100mmGround Floor
344.25
737
253746.675
... More
I110 - Providing and fixing factory made single extruded WPC Wood Polymer Composite solid door window Clerestory windows and other Frames Chowkhat comprising of virgin PVC polymer of K value 58 60 Suspension Grade , calcium carbonate and natural fibres wood powder rice husk wheat husk and non toxic additives maximum toxicity index of 12 for 100 g fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg m3, screw withdrawal strength of 2200 N Face and 1100 N Edge , minimum compressive strength of 58 N mm2 , modulus of elasticity 900 N mm2 and resistance to spread of flame of Class A category with property of being termite borer proof, water moisture proof and fire retardant and fixed in position with M.S hold fast lugs SS dash fasteners of required dia and length complete as per direction of Engineer InCharge. Fixtures shall be paid for separately Size 62 x 100mmFirst Floor
52.5
744
39084.675
... More
I111 - Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC Wood PolymerComposite solid plain flush door shutter of required size comprising of virgin polymer of K value 58 60 Suspension Grade , calcium carbonate and natural fibers wood powder rice husk wheat husk and non toxic additives maximum toxicity index of 12 for 100 g having minimum density of 650 kg m3 and screw withdrawal strength of 1800 N Face and 900 N Edge , minimum compressive strength of 50 N mm2 , modulus of elasticity 850 N mm2 and resistance to spread of flame of Class A category with property of being termite borer proof, water moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges. Cost of Fixtures to be paid separately do 35 mm thicknessGround Floor
106.79
4243
453115.3095
... More
I112 - Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC Wood PolymerComposite solid plain flush door shutter of required size comprising of virgin polymer of K value 58 60 Suspension Grade , calcium carbonate and natural fibers wood powder rice husk wheat husk and non toxic additives maximum toxicity index of 12 for 100 g having minimum density of 650 kg m3 and screw withdrawal strength of 1800 N Face and 900 N Edge , minimum compressive strength of 50 N mm2 , modulus of elasticity 850 N mm2 and resistance to spread of flame of Class A category with property of being termite borer proof, water moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws The cost includes cost of materials, transportation, labour and fixing charges. Cost of Fixtures to be paid separately do 35 mm thicknessFirst Floor
18.9
4285
80995.572
... More
I113 - Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications.Ground Floor
74
1066
78943.2
... More
I114 - Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications.First Floor
19
1077
20471.93
... More
I115 - Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications.Terrace Floor
3
1088
3264.72
... More
I116 - Providing and fixing of 3 track x 2 panel sliding windows made out of multi chambered UPVC Matching to RAL 9016 sections and with minimum TiO2 Titanium Dioxide at 6PHR with TPE Thermo Plastic Elastomer and lead free, gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile through out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardwareand Multi point locking system with touch lock. Wall thickness of frame and sash shall be of 2mm 2.5mm. Maximum possible size -2419mm x 2200mm. The cost is inclusive of all fixtures and separate charges for minor TandP s shall not be made Ground Floor
495.54
7070
3503814.678
... More
I117 - Providing and fixing of 3 track x 2 panel sliding windows made out of multi chambered UPVC Matching to RAL 9016 sections and with minimum TiO2 Titanium Dioxide at 6PHR with TPE Thermo Plastic Elastomer and lead free, gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile through out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardwareand Multi point locking system with touch lock. Wall thickness of frame and sash shall be of 2mm 2.5mm. Maximum possible size - 2419mm x 2200mm. The cost is inclusive of all fixtures and separate charges for minor TandP s shall not be made First Floor
234.33
7141
1673446.6053
... More
I118 - Providing and fixing of 3 track x 2 panel sliding windows made out of multi chambered UPVC Matching to RAL 9016 sections and with minimum TiO2 Titanium Dioxide at 6PHR with TPE Thermo Plastic Elastomer and lead free, gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile through out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardwareand Multi point locking system with touch lock. Wall thickness of frame and sash shall be of 2mm 2.5mm. Maximum possible size - 2419mm x 2200mm. The cost is inclusive of all fixtures and separate charges for minor TandP s shall not be made Terrace Floor
14.4
7212
103864.608
... More
I119 - Providing and fixing of louvered ventilator made out of multi chambered UPVC Matching to RAL 9016 sections and with minimum TiO2 Titanium Dioxide at 6PHR with TPE Thermo Plastic Elastomer and lead free with gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile through out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium powder coated in white will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size - 1000mm x 1000mm. The cost is inclusive of all fixtures and separate charges for minor TandP s shall not be made Ground Floor
46.8
6004
281031.66
... More
I120 - Providing and fixing of louvered ventilator made out of multi chambered UPVC Matching to RAL 9016 sections and with minimum TiO2 Titanium Dioxide at 6PHR with TPE Thermo Plastic Elastomer and lead free with gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile through out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium powder coated in white will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size -1000mm x 1000mm. The cost is inclusive of all fixtures and separate charges for minor TandP s shall not be made First Floor
5.4
6065
32751
... More
I121 - Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings wooden frames with rawl plugs screws etc.Ground Floor
11230.38
192
2157917.517
... More
I122 - Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings wooden frames with rawl plugs screws etc.First Floor
5034.33
194
977012.4231
... More
I123 - Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings wooden frames with rawl plugs screws etc.Terrace Floor
302.4
196
59273.424
... More
I124 - Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer in charge.Ground Floor
1181.16
120
142625.07
... More
I125 - Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer in charge.First Floor
563.13
121
68679.3348
... More
I126 - Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer in charge.Terrace Floor
34.56
123
4257.1008
... More
I127 - Applying priming coats with primer of approved brand and manufacture, having low VOC Volatile Organic Compound content. With ready mixed pink or grey primer on wood work hard and soft wood having VOC content less than 50 grams litre as per specifications and as per directions of Engineer in charge.Ground Floor
440.62
58
25908.456
... More
I128 - Applying priming coats with primer of approved brand and manufacture, having low VOC Volatile Organic Compound content. With ready mixed pink or grey primer on wood work hard and soft wood having VOC content less than 50 grams litre as per specifications and as per directions of Engineer in charge.First Floor
180.32
59
10709.2048
... More
I129 - Applying priming coats with primer of approved brand and manufacture, having low VOC Volatile Organic Compound content. With ready mixed pink or grey primer on wood work hard and soft wood having VOC content less than 50 grams litre as per specifications and as per directions of Engineer in charge.Terrace Floor
20.74
59
1243.9852
... More
I130 - Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer in charge.Ground Floor
440.62
120
53204.865
... More
I131 - Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer in charge.First Floor
180.32
121
21991.8272
... More
I132 - Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer in charge.Terrace Floor
20.74
123
2554.7532
... More
I133 - Providing and fixing stainless steel Grade 304 railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature wherever required and fitting the same with necessary stainless steel nuts and bolts complete, i c fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer in charge, for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc. including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer in Charge.Ground Floor
2228.77
593
1322217.8025
... More
I134 - Providing and fixing stainless steel Grade 304 railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature wherever required and fitting the same with necessary stainless steel nuts and bolts complete, i c fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer in charge, for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc. including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer in Charge.First Floor
1267.92
599
759712.3056
... More
I135 - Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M 30 grade made of CandD waste by block making machine with vibratory compaction laid in required pattern and including over 50mm thick compacted bed of coarse sand,
filling the joints with fine sand etc. all complete as per the direction of Engineer in charge.Ground Floor
521.54
840
438093.6
... More
I136 - Extra for providing throating or drip moulding to R.C.C. chajja with plastering labour charges only as per specifications.Ground Floor
1778.36
34
61620.174
... More
I137 - Extra for providing throating or drip moulding to R.C.C. chajja with plastering labour charges only as per specifications.First Floor
1195.86
34
41436.549
... More
I138 - Extra for providing throating or drip moulding to R.C.C. chajja with plastering labour charges only as per specifications.Terrace Floor
405.37
34
14046.0705
... More
I139 - Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace Chajjas Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The
waterproofing membrane to be applied in 2coats @ 1.6 kg m2 to achieve final DFT Dry Film Thickness of 1mm including prime coat of epoxy primer @150 g m2 and protection with 120gsm Geo textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints
completely as per specification.
25.41
857
21797.9685
... More
I140 - Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace Chajjas Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT dry film thickness of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification.First Floor
451.15
866
390889.8945
... More
I141 - Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace Chajjas Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT dry film thickness of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification.Terrace Floor
2644.78
883
2337350.7728
... More
I142 - Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace Chajjas Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT dry film thickness of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification.Terrace Floor
1994.87
875
1745531.1987
... More
I143 - Providing and laying water proofing treatment to the Water tanks and Liquid Retaining structures with two component acrylic polymer modified cementitious waterproofing membrane with minimum elongation of 50% applied @ 1.5 kg m2 for internal side waterproofing in two layers with waiting period of 4 6 hrs per layer and food grade epoxy coating in two coats certified by CFTRI Mysuru, including surface preparation completely as per specification. Terrace Floor
419.44
532
223288.884
... More
I144 - Providing and laying cinder concrete in cement 1:15 1 cement : 15 cinder of 12.5mm nominal gauge on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curing complete as per specifications.Ground Floor
51.9
2117
109916.415
... More
I145 - Providing and laying cinder concrete in cement 1:15 1 cement : 15 cinder of 12.5mm nominal gauge on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curing complete as per specifications.First Floor
29.62
2139
63358.0686
... More
I146 - Bore Packing : Providing and applying high strength non shrink free flow grout confirming to BS 1881 Part 116 : 1983 comprising of blend of portland cement, graded fillars and chemical additives which impart controlled expansion in the plastic state duly minimizing water demand. Minimum 25mm thickness around the pipe First Floor
60
346
20790
... More
I147 - Conveying by Loading and unloading of moorum debris. Placing tipper at loading point, loading with front end loader, dumping, turning for return trip, including time for haulage and return trip complete as per specifications. For 2km
8156.16
113
926621.3376
... More
I148 - Earthwork excavation in all soil deposits and filling sides of foundation upto plinth in layers not exceeding 20cms. in depth, compacting each deposited layer by ramming after watering with all lead and lift including cost of all labour complete as per specifications. specification.
6663.76
423
2819770.044
... More
I149 - Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.
96
1104
106041.6
... More
I150 - Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in chargeSS Handles 300mm
113
577
65257.5
... More
I151 - Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS Tower Bolts 250x10mm.
208
210
43680
... More
I152 - Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS hinges 125 mm.
720
52
37800
... More
I153 - Providing and Fixing MS Hold fast
748
250
187000
... More
I154 - Magnetic catcher triple type.
180
31
5670
... More
I155 - Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS Aldrop 16mm dia, 300mm.
97
393
38193.75
... More
I156 - Providing and fixing aluminium die cast body tubular type universal hydraulic door closer having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm , with necessary accessories and screws etc. complete.
83
1169
97085.1
... More
I157 - Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS Door stopper 75mm.
83
105
8715
... More
I158 - Brass Screws of 50mm .
6992
5
36708
... More
I159 - Nails of varying sizes .
340
70
23919
... More
I160 - Designing, fabricating, testing, protection, installing and fixing in position semi grid unitized system of structural glazing with open joints for linear as well as curvilinear portions of the building for all heights and all levels, including: a Structural analysis and design and preparation of shop drawings for the specified design loads conforming to IS 875 part III the system must passed the proof test at 1.5 times design wind pressure without any failure , including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop barrier cumsmoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation and drainage and protection against fire hazard including: b Fabricating and supplying serrated M.S. hot dip galvanised Aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimentional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC masonry structural steel framework of building structure using stainless steel anchor fasteners bolts, nylon seperator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers. c Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a clean and controlled factory work shop environment, including double sided spacer tape, setting blocks and backer rod, all of approved grade,
brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass. d Providing and fixing in position
flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight. e Making provision for drainage of moisture water that enters the curtain glazing system to make it watertight, by incorporating
principles of pressure equalization, providing suitable gutter profiles at bottom if required , making necessary holes of required sizes and of required numbers etc. complete.
16.49
2989
49301.9669
... More
I161 - Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and rrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer in Charge.
55.2
2764
152608.68
... More
I162 - Providing and fixing ball bearing for rolling shutters including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer in Charge.
20
423
8463
... More
I163 - Extra for providing mechanical device chain and crank operation for operating rolling shutters: Exceeding 10.00 m² and upto 16.80 m² in the area including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineerin Charge.
69
1036
71508.15
... More
I164 - IRONITE FLOORING Cement Concrete Flooring in rich Ratio normally 100 to 150mm thick with nominal reinforcrment.The top layer of 10 12mm thickness is laid with iron chips or granules mixed with the concrete to make the top layer more HardGround Floor
1099.39
1100
1209329
... More
I165 - Alluminium Expansion Joints Expansion joints consists of aluminium base frame thickness 2mm,extruded and anodised aluminium plate of 4mm thickness width 125mm for 25mm gap ,150mm for 50mm gap ,200mm for 100mm gap ,250mm for 15mm gap and 300mm for 200mm gap with aluminium profile,centring bar and pvc water barrier
327.94
7920
2597284.8
... More
I166 - Providing SandS RCC SPUN VIBRATED CAST PIPES REINFORCED pipes NP 3 Class conforming to IS:458 1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work site, rolling and lowering into trenches, laying true to line and level including loading and unloading at both destinations and jointing of pipes and specials, perfect linking of joints with jack to correct position including cost of jointing materials, i.e, rubber rings conforming to IS: 5382 for SandS RCC pipes, with all leads and lifts as directed and giving necessary hydraulic test as per ISS to the required pressure and commissioning etc. complete. Contractor will make his own arrangements for procuring water for testing . Before the execution of the work, the contractor shall carry out the survey. RCC NP3 Class pipe of 450 mm dia.
300
2470
741195
... More
I167 - Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 1 cement : 4 coarse sand C.I. cover with frame light duty 600X850 mm internal dimensions, total weight of cover with frame to be not less than 38 kg weight of cover 23 kg and weight of frame 15 kg , R.C.C. top slab with 1:1.5:3 mix 1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size , foundation concrete 1:5:10 1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size , inside plastering 12 mm thick with cement mortar 1:3 1 cement : 3 coarse sand , finished smooth with a floating coat of neat cement on walls and bed concrete etc.complete as per standard design: Inside dimensions 600x 850 mm and 45 cm deep for pipe line with three or more inlets : With common burnt clay non modular bricks of class designation3.5
12
7771
93252.6
... More
I168 - Name Boards and Signages
2
100000
200000
... More
I169 - Box cutting trenching the sub grade to proper slope, camber and removing inequalities including removing the stuff and depositing on the road side slopes cutting of earthwork shall be paid seperately in the respective item on the basis of classification of the excavation including cost of all labour complete as per specifications.
900
2
1800
... More
I170 - Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Table 300 2 for embankment construction.
90
110
9922.5
... More
I171 - Construction of sub grade and earthen shoulders with
approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No.
360
517
186354
... More
I172 - Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory roller in stages to proper grade and camber, applying and brooming requisite type of screening binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density.Using Screening Crushable type such as Moorum or Gravel
270
2272
613494
... More
I173 - Construction of Granular Sub Base of required grading as
per design spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with front end loader at OMC and compacting with vibratory roller to achieve the desired density, complete as per clause 401
180
2478
446040
... More
I174 - Construction of dry lean cement concrete Sub base over a prepared sub grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 14:1, aggregate gradation after blending to be as per table 600 1, cement content not to be less than 140 kg m3 , optimum moisture content to be determined
during trial length construction, concrete strength not to be less than 7 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8 10 t vibratory roller, finishing and curing.
90
5166
464940
... More
I175 - Construction of M40 Grade un reinforced, dowel jointed,
plain cement concrete pavement over a prepared sub base in recommended proportions, coarse and fine aggregate conforming to IS 383:2016, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design transported to site, laid with a slip form paver finisher,
spread, compacted and finished in a continuous operationincluding provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures, curing compound, steel channels, finishing to lines and grades as per drawing.
166.5
9514
1584089.325
... More
I176 - Cutting transverse contraction joints 3 to 4 mm wide and depth 60mm in concrete slab using concrete cutting machine with diamond studded saw within 48 hours of casting of bay slab etc. complete including subsequent widening of the groove 8 to 10 mm. wide at top having depth of 15 mm. as directed by Engineer incharge.
400
73
29400
... More
I177 - Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite,rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials excluding cost of specials with jointing of approved type, with all labour with all lead and lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS Contractor will make his own arrangements for procuring water for testing etc. PVC pipes 160mm dia., 6 kg sqcm and class 3
20
648
12978
... More
I178 - Supplying and fixing M15grade precast cement concrete Kerb stones for Roadway,Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge. The cost of PCC shall be paid extra 600 x 300 x 150 mm Kerb Stone
100
486
48615
... More
I179 - Painting two coats after filling the surface with synthetic
enamel paint in all shades on new plastered concrete
surfaces.
30
114
3433.5
... More
I180 - POINT WIRING USING COPPER WIRE WITHOUT SWITCH: Supplying and wiring adopting loop system in existing PVC Conduit casing capping casing capping using 2x1.5Sqmm Phase and Neutral and 1x1.0 sqmm Earth wire FRLS multi strand PVC insulated copper wire confirming to IS 694: and latest amendments without control switch shall be fixed on the existing plastic sheet gang box, the other end of the wires shall be terminated with sufficient loose length in a wood PVC round block. complete for each outlet.
point wiring using class A Materials: Short point upto 3 mts from tapping point to out let via switch box
128
282
36153.6
... More
I181 - POINT WIRING USING COPPER WIRE WITHOUT SWITCH: Supplying and wiring adopting loop system in existing PVC Conduit casing capping casing capping using 2x1.5Sqmm Phase and Neutral and 1x1.0 sqmm Earth wire FRLS multi strand PVC insulated copper wire confirming to IS 694: and latest amendments without control switch shall be fixed on the existing plastic sheet gang box, the other end of the wires shall be terminated with sufficient loose length in a wood PVC round block. complete for each outlet.
point wiring using class A Materials: Medium point above 3 mts upto 6mts from tapping point to outlet via switch box
284
397
113017.8
... More
I182 - POINT WIRING USING COPPER WIRE WITHOUT SWITCH: Supplying and wiring adopting loop system in existing PVC Conduit casing capping casing capping using 2x1.5Sqmm Phase and Neutral and 1x1.0 sqmm Earth wire FRLS multi strand PVC insulated copper wire confirming to IS 694: and latest amendments without control switch shall be fixed on the existing plastic sheet gang box, the other end of the wires shall be terminated with sufficient loose length in a wood PVC round block. complete for each outlet.
point wiring using class A Materials: Long point above 6 mts upto 10 mts from tapping point to outlet via switch box
880
582
512820
... More
I183 - POINT WIRING USING COPPER WIRE WITHOUT SWITCH: Supplying and wiring adopting loop system in existing PVC Conduit casing capping casing capping using 2x1.5Sqmm Phase and Neutral and 1x1.0 sqmm Earth wire FRLS multi strand PVC insulated copper wire confirming to IS 694: and latest amendments without control switch shall be fixed on the existing plastic sheet gang box, the other end of the wires shall be terminated with sufficient loose length in a wood PVC round block. complete for each outlet.
point wiring using class A Materials: Two outlet in a row above 3mts upto 6 mts from tapping point to outlet via switches
127
710
90277.95
... More
I184 - POINT WIRING USING COPPER WIRE WITHOUT SWITCH: Supplying and wiring adopting loop system in existing PVC Conduit casing capping casing capping using 2x1.5Sqmm Phase and Neutral and 1x1.0 sqmm Earth wire FRLS multi strand PVC insulated copper wire confirming to IS 694: and latest amendments without control switch shall be fixed on the existing plastic sheet gang box, the other end of the wires shall be terminated with sufficient loose length in a wood PVC round block. complete for each outlet.
point wiring using class A Materials: Three outlet in a row above 6 mts upto 10 mts from the tapping point to outlet via switches
84
1038
87229.8
... More
I185 - Supplying and fixing surface flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick C.C wall, including necessary rawl plugs, Machine NF screws etc., complete. 1 2Way
94
108
10166.1
... More
I186 - Supplying and fixing surface flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick C.C wall, including necessary rawl plugs, Machine NF screws etc., complete. 3 Way
56
130
7291.2
... More
I187 - Supplying and fixing surface flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick C.C wall, including necessary rawl plugs, Machine NF screws etc., complete.
4 5 Way
58
143
8343.3
... More
I188 - Supplying and fixing surface flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick C.C wall, including necessary rawl plugs, Machine NF screws etc., complete. 6 Way
52
181
9445.8
... More
I189 - Supplying and flush mounting powder coated metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick stone cc wall: 1 2 Way
526
144
76217.4
... More
I190 - Supplying and flush mounting powder coated metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick stone cc wall: 3 Way
1017
166
169788.15
... More
I191 - Supplying and flush mounting powder coated metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick stone cc wall: 4 5Way
242
185
44975.7
... More
I192 - Supplying and flush mounting powder coated metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick stone cc wall: 6 Way
521
231
120351
... More
I193 - Supplying and flush mounting powder coated metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick stone cc wall: 8 Way
168
274
46040.4
... More
I194 - Supplying and flush mounting powder coated metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick stone cc wall: 10 12 Way
76
334
25456.2
... More
I195 - Supplying and flush mounting powder coated metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick stone cc wall: 16 Way
42
381
16008.3
... More
I196 - Supplying and flush mounting powder coated metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick stone cc wall: 18 Way
44
425
18711
... More
I197 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing metal box: 1 to 2 Module
590
143
84871.5
... More
I198 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing metal box:3 Module
1059
169
179023.95
... More
I199 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing metal box:4 Module
298
183
54757.5
... More
I200 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing metal box:6 Module
548
245
134643.6
... More
I201 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing metal box:8 Module
164
298
48904.8
... More
I202 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing metal box:10 12 Module
74
361
26728.8
... More
I203 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing metal box:16 Module
24
416
10004.4
... More
I204 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws , bolts nuts etc,.complete on the existing metal box:18 Module
26
479
12476.1
... More
I205 - Supplying and fixing of modular switch socket stepped electronic fan regulator s dimmer telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293: 6 amps one way switch
1724
107
184640.4
... More
I206 - Supplying and fixing of modular switch socket stepped electronic fan regulator s dimmer telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293 6 amps two way switch
140
174
24402
... More
I207 - Supplying and fixing of modular switch socket stepped electronic fan regulator s dimmer telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293 6 Amps 3 way sockets
934
179
167699.7
... More
I208 - Supplying and fixing of modular switch socket stepped electronic fan regulator s dimmer telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293 stepped fan Regulator Two Module
363
374
136070.55
... More
I209 - Supplying and fixing of modular switch socket stepped electronic fan regulator s dimmer telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293 6 16 Amps universal sockets
149
247
36922.2
... More
I210 - Supplying and fixing of modular switch socket stepped electronic fan regulator s dimmer telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293 16A one way switch
149
189
28161
... More
I211 - Supplying and fixing of modular switch socket stepped electronic fan regulator s dimmer telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293 32A DP switch
68
342
23276.4
... More
I212 - Supplying and fixing of modular switch socket stepped electronic fan regulator s dimmer telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293 6A Bell push
10
185
1858.5
... More
I213 - Supplying and fixing one of 230 V Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote. Ding Donng bell
10
258
2583
... More
I214 - Extra length of GI pipe of class B 19mm dia for down rod.
375
206
77568.75
... More
I215 - Supply and fixing one metal Fan box with round hook
375
122
46068.75
... More
I216 - Open Conduit System Supplying 2 mm thick heavy gauge PVC conduit pipe with suitable size bends metal PVC junction boxes adhesive paste etc..and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wires where ever necessary 20 mm dia 2mm thick
1060
72
76797
... More
I217 - Open Conduit System Supplying 2 mm thick heavy gauge PVC conduit pipe with suitable size bends metal PVC junction boxes adhesive paste etc..and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wires where ever necessary 25 mm dia 2mm thick
1305
85
110990.25
... More
I218 - Open Conduit System Supplying 2 mm thick heavy gauge PVC conduit pipe with suitable size bends metal PVC junction boxes adhesive paste etc..and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wires where ever necessary 32 mm dia 2.5mm thick
760
111
84588
... More
I219 - Concealed Conduit System Supplying 2 mm thick heavy gauge PVC conduit pipe with suitable size bends metal PVC junction boxes adhesive paste etc..and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wires where ever necessary 20 mm dia 2mm thick
7410
69
513513
... More
I220 - Concealed Conduit System Supplying 2 mm thick heavy gauge PVC conduit pipe with suitable size bends metal PVC junction boxes adhesive paste etc..and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wires where ever necessary 25 mm dia 2mm thick
10900
81
892710
... More
I221 - Concealed Conduit System Supplying 2 mm thick heavy gauge PVC conduit pipe with suitable size bends metal PVC junction boxes adhesive paste etc..and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wires where ever necessary 32 mm dia 2.5mm thick
2990
108
323368.5
... More
I222 - Groove Cutting in Wall Supplying 2 mm thick heavy gauge PVC conduit pipe with bends metal junction boxes adhesives paste etc and bracing U or J hooks and cement plastering upto the surface of the trick level and run with 18 SWG Gi fish wire run through out the conduit wherever necessary 20 mm dia 2mm thick
890
71
63546
... More
I223 - Groove Cutting in Wall Supplying 2 mm thick heavy gauge PVC conduit pipe with bends metal junction boxes adhesives paste etc and bracing U or J hooks and cement plastering upto the surface of the trick level and run with 18 SWG Gi fish wire run through out the conduit wherever necessary 25 mm dia 2mm thick
1385
82
114885.75
... More
I224 - Groove Cutting in Wall Supplying 2 mm thick heavy gauge PVC conduit pipe with bends metal junction boxes adhesives paste etc and bracing U or J hooks and cement plastering upto the surface of the trick level and run with 18 SWG Gi fish wire run through out the conduit wherever necessary 32 mm dia 2.5mm thick
310
103
32224.5
... More
I225 - Supplying and fixing PVC metal conduit deep junction box 19 20mm deep junction box
658
51
33854.1
... More
I226 - Supplying and fixing PVC metal conduit deep junction box 25mm deep junction box
801
58
47098.8
... More
I227 - Supplying and fixing PVC metal conduit deep junction box 32mm deep junction box
145
64
9287.25
... More
I228 - WIRING FOR Lighting Power Circuits FRLS PVC insulated 1100V grade, multistrand copper with low conductor resistance single core wire in open or concealed wiring system with specified IS 694:1990 and cofirming to Latest amendments. 1.5 Sq.mm
10290
27
280917
... More
I229 - WIRING FOR Lighting Power Circuits FRLS PVC insulated 1100V grade, multistrand copper with low conductor resistance single core wire in open or concealed wiring system with specified IS 694:1990 and cofirming to Latest amendments. 2.5 sq.mm
16060
44
708246
... More
I230 - WIRING FOR Lighting Power Circuits FRLS PVC insulated 1100V grade, multistrand copper with low conductor resistance single core wire in open or concealed wiring system with specified IS 694:1990 and cofirming to Latest amendments. 4 sq.mm
10808
66
714949.2
... More
I231 - WIRING FOR Lighting Power Circuits FRLS PVC insulated 1100V grade, multistrand copper with low conductor resistance single core wire in open or concealed wiring system with specified IS 694:1990 and cofirming to Latest amendments. 6sq.mm
6080
96
587328
... More
I232 - WIRING FOR Lighting Power Circuits FRLS PVC insulated 1100V grade, multistrand copper with low conductor resistance single core wire in open or concealed wiring system with specified IS 694:1990 and cofirming to Latest amendments. 10sq.mm
4780
175
838173
... More
I233 - WIRING FOR Lighting Power Circuits FRLS PVC insulated 1100V grade, multistrand copper with low conductor resistance single core wire in open or concealed wiring system with specified IS 694:1990 and cofirming to Latest amendments. 16sq.mm
2010
333
671139
... More
I234 - MCB DB and CABLE TRAY Supplying and fixing regular MCB distribution boards on wall wood board flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB s single phase 3 phase single DOUBLE door with powder coated painting etc.Made out of 14 SWG MS enclosure. 8 Way TP and N
10
6395
63955.5
... More
I235 - MCB DB and CABLE TRAY Supplying and fixing regular MCB distribution boards on wall wood board flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB s single phase 3 phase single DOUBLE door with powder coated painting etc.Made out of 14 SWG MS enclosure. 6 Way TP and N
19
5187
98553
... More
I236 - MCB DB and CABLE TRAY Supplying and fixing regular MCB distribution boards on wall wood board flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB s single phase 3 phase single DOUBLE door with powder coated painting etc.Made out of 14 SWG MS enclosure. 4 Way SP and N
20
4239
84798
... More
I237 - MCB DB and CABLE TRAY Supplying and fixing regular MCB distribution boards on wall wood board flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB s single phase 3 phase single DOUBLE door with powder coated painting etc.Made out of 14 SWG MS enclosure. 8 Way SP and N
11
1946
21413.7
... More
I238 - MCB DB and CABLE TRAY Supplying and fixing regular MCB distribution boards on wall wood board flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB s single phase 3 phase single DOUBLE door with powder coated painting etc.Made out of 14 SWG MS enclosure. 12 Way SP and N
8
2445
19563.6
... More
I239 - Supplying and fixing regular MCCB distribution Panel
confirming to IS IEC 61439 3 and IK09 tested as per IS IEC 62262 with minimum IP43 protection provided with
Polyurethane PUR gasket, with suitable earthing system, on wall wood board flush mounting using required cl A , bolts, nuts, etc., with provision for fixing of suitable type capacity MCCB s as an incomer for 3 phase Double door with necessary bus bar completely wired to use on 440V 3phase 4 wire powder coated painting etc., complete with a provision for fixing of single three phase suitable capacity MCB s as outgoings confirming to IS IEC 60898 2. 8 Way
2
13235
26470.5
... More
I240 - Supplying and fixing regular MCCB distribution Panel
confirming to IS IEC 61439 3 and IK09 tested as per IS IEC 62262 with minimum IP43 protection provided with
Polyurethane PUR gasket, with suitable earthing system, on wall wood board flush mounting using required cl A , bolts, nuts, etc., with provision for fixing of suitable type capacity MCCB s as an incomer for 3 phase Double door with necessary bus bar completely wired to use on 440V 3phase 4 wire powder coated painting etc., complete with a provision for fixing of single three phase suitable capacity MCB s as outgoings confirming to IS IEC 60898 2. 12 Way
2
16305
32610.9
... More
I241 - Supplying and fixing regular MCCB distribution Panel
confirming to IS IEC 61439 3 and IK09 tested as per IS IEC 62262 with minimum IP43 protection provided with
Polyurethane PUR gasket, with suitable earthing system, on wall wood board flush mounting using required cl A , bolts, nuts, etc., with provision for fixing of suitable type capacity MCCB s as an incomer for 3 phase Double door with necessary bus bar completely wired to use on 440V 3phase 4 wire powder coated painting etc., complete with a provision for fixing of single three phase suitable capacity MCB s as outgoings confirming to IS IEC 60898 2. 100A 25kA MCCB
4
8911
35645.4
... More
I242 - Supplying and fixing miniature circuit breakers on existing
MCB distribution boards using necessary fixing materials
and C Type curve, indicator ON OFF, energy cross 3 with
Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6 32 A SP
226
435
98479.5
... More
I243 - Supplying and fixing miniature circuit breakers on existing
MCB distribution boards using necessary fixing materials
and C Type curve, indicator ON OFF, energy cross 3 with
Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 40 A DP
144
1113
160272
... More
I244 - Supplying and fixing miniature circuit breakers on existing
MCB distribution boards using necessary fixing materials
and C Type curve, indicator ON OFF, energy cross 3 with
Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 50 63 A TPN
50
3242
162120
... More
I245 - Supplying, fixing and wiring Residual current circuit breaker RCCB 240 450V up to 300mA sensitivity on existing wood panel board. 32 40Amps 2 pole
23
4786
110099.85
... More
I246 - Supplying, fixing and wiring Residual current circuit breaker RCCB 240 450V up to 300mA sensitivity on existing wood panel board. 63Amps 4 pole
11
5822
64044.75
... More
I247 - Supplying of TPST with rewirable porcelain channels in SM
enclosure. Made out of 14 SWG powder coated paint of
approved colour. 63A
8
4403
35229.04
... More
I248 - Supplying of TPST with rewirable porcelain channels in SM
enclosure. Made out of 14 SWG powder coated paint of
approved colour. 100A
8
7949
63596.4
... More
I249 - Supply, Installation, testing and Commissioning of 63A, three phase 5pin Plug and socket outlet controlled by 63A 4pole MCB
26
8650
224900
... More
I250 - Supply, Installation, testing and Commissioning of 32A, single phase 3pin plug and socket outlet controlled by 32A 2POLE MCB IP45
20
3850
77000
... More
I251 - Supply and installation of 300 mm wide and 40mm height, 1.6 mm thick ladder type cable trays fixed with MS supports,anchor bolt etc.,complete as required at site.
210
465
97650
... More
I252 - Supply and installation of 150 mm wide and 40mm height, 1.6 mm thick Perfforated cable trays fixed with MS supports,anchor bolt etc.,complete as required at site.
145
510
73950
... More
I253 - Supply and laying of Raceways 200mm wide x 40mm Deep MS cold galvanised 16 guage made of CRCA sheet with removable type cover plate maximum length of each section shall not be more than 2.5 Mtrs. Length. etc., as required.
85
865
73525
... More
I254 - Supply and laying of Raceways 100mm wide x 40mm Deep MS cold galvanised 16 guage made of CRCA sheet with removable type cover plate maximum length of each section shall not be more than 2.5 Mtrs. Length. etc., as required.
135
610
82350
... More
I255 - ELECTRICAL FIXTURES: Supplying of .....feet PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours and 70% lumen maintenance with CRI 80. Power Input: 220 240V@ 50 60Hz and Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fitting 1 x 2 9 10 W
76
578
43969.8
... More
I256 - ELECTRICAL FIXTURES: Supplying of .....feet PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours and 70% lumen maintenance with CRI 80. Power Input: 220 240V@ 50 60Hz and Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fitting 1 x 4 20 22 W
706
724
511497
... More
I257 - ELECTRICAL FIXTURES: Supplying of .....feet PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours and 70% lumen maintenance with CRI 80. Power Input: 220 240V@ 50 60Hz and Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fitting 1 x 4 36 40 W
64
1332
85276.8
... More
I258 - Supplying of recess mounting non integral type . LED w luminaire comprising of pressure decast extruded aluminium housing, with spring loaded false ceiling clA, Power LEDs with CCT 6500 degree K, CRI 70%. efficacy 100 lumen per W, 120degree beam spread, life 25000 burning hours and Compliance to IS 10322 IEC 60598, LM 79 and LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level LEDs are driven by HF electronic driver integrated in a separate control gear assembly., with PF 0.95, power loss should 5% of lamp Wage., short circuit and open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. LED modular down light 2 x2 34 36W
20
4780
95613
... More
I259 - Supply of round square recess surface mounted rolling
type LED Down light with ...... W GU 10 LED Lamp Rib
Fabricated from diecast aluminium with white powder
coated prewired to mains connector and has swivelling unit of aluminium die cast eye ball and LED Lamp position retained by circular wire spring, with Life of 25000 burning hours and 70% lumen maintenance with CRI 80. Power Input: 220 240V @50 60Hz and Power factor 0.9 along with CE approved. 2years Warranty against any manufacturing defect working under standard electrical condition LED square or round down light 15 18W
104
1390
144580.8
... More
I260 - Supply and fixing of LED square or round down light 24W
42
1950
81900
... More
I261 - Supplying and fixing flexible LED Strip Light .W Power consumption in 5 ms length CCT6500 degree K, CRI 70%. efficacy 80 lumen per W, life 25000 burning hours and Compliance to IS 10322 IEC 60598, LM 79 and LM 80. The LED are driven by HF electronic driver non integrated, with PF 0.95, power loss should 5% of lamp Wage.short circuit and open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved with 2 years Warranty against any manufacturing defect working under standard electrical condition
40
1355
54222
... More
I262 - Supply and fixing of 15W Compound Wall Light Fixture
12
2850
34200
... More
I263 - Supply and fixing of 12W LED retro fit lamp with holder
46
450
20700
... More
I264 - Supply and fixing of 15 18W LED UP Down Light Fixture
12
2600
31200
... More
I265 - Supply and fixing of 18W LED Bulk Head light Fixture
36
1650
59400
... More
I266 - Supplying exhaust fan of 1440 RPM of 300 mm 12 size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply.
60
1566
93996
... More
I267 - Supplying of Ceiling Fan with Capacitor rating As per
guideline of BEE 5 star rating and IS:374 79 and also
comply with IS: 1709 1984 with latest amendment, Rated
voltage 220 V 50 Hz, Rated power input 48 W + 10 %,
Rated current As per IS:374 79, Rated power factor 0.9
lagging min , Rated speed 350 + 10% RPM, Rated air
delivery 210 + 10% Cubic Meter Minimum, Rated service
value 4.2 CMM W, Three Blades of blade leaf 1.05 mm thick Aluminium Alloy sheet, Class B motor insulation, Bearing Two ball bearings, Top 6202, Bottom 6201, as per IS specification, Motor winding. Temp rise Shall not exceed 75 deg C over and ambient of 40 0C by resistance method at 245 V, Insulation resistance Shall not be less than Two Mega Ohms 2M Ohms , Leakage current Should not exceed 210 Micro Amp, Power input, Wand current, Air Delivery and Fan Speed as per IS:374 1979 with latest amendment, 2 year manufacturer Warranty. 48 Sweep 5 Star 1200 mm
333
2810
936013.05
... More
I268 - Supplying of Ceiling Fan with Capacitor rating As per
guideline of BEE 5 star rating and IS:374 79 and also
comply with IS: 1709 1984 with latest amendment, Rated
voltage 220 V 50 Hz, Rated power input 48 W + 10 %,
Rated current As per IS:374 79, Rated power factor 0.9
lagging min , Rated speed 350 + 10% RPM, Rated air
delivery 210 + 10% Cubic Meter Minimum, Rated service
value 4.2 CMM W, Three Blades of blade leaf 1.05 mm thick Aluminium Alloy sheet, Class B motor insulation, Bearing Two ball bearings, Top 6202, Bottom 6201, as per IS specification, Motor winding. Temp rise Shall not exceed 75 deg C over and ambient of 40 0C by resistance method at 245 V, Insulation resistance Shall not be less than Two Mega Ohms 2M Ohms , Leakage current Should not exceed 210 Micro Amp, Power input, Wand current, Air Delivery and Fan Speed as per IS:374 1979 with latest amendment, 2 year manufacturer Warranty. 56 Sweep 5 Star 1400 mm
5
3941
19708.5
... More
I269 - Supplying wall mounting fan suitable to operate at singlephase 230v AC. supply. 400 mm Sweep
9
3372
30353.4
... More
I270 - Fixing all types and all capacities of fluorescent false ceiling spot light CFL LED fittings indoor on the wall ceiling rafters girders using 23 0.0076 twin twisted PVC insulated wires, required Nos of round blocks and clA.
1348
124
168432.6
... More
I271 - Fixing a ceiling Wall mounting fan of all capacities and all types to the existing S hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary length of 23 0.0076 inch PVC insulated twin twisted copper wire and wiring.
347
170
59024.7
... More
I272 - Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 A. ceiling rose with sufficient length of 23 0.0076 inch PVC insulated twin core wire.
60
453
27216
... More
I273 - CAMERAS and ACCESSORIES: Supply, Installation, Testing and Commissioning of 4 MP IP Indoor Dome camera with 1 3” progressive scan CMOS Image Sensor 2.8mm Fixed Lens 2560 X 1440 @30fps resolution, IR Illumination Up to 40m IR Distance ,WDR, Video Compression H.265+ H.264+ H.265 H.264, DC12V, PoE 802.3 af Class 0 IP67 Ingress Protection IK10 Vandal Resistance,The prices should include the necessary mounts and brackets.
33
15000
495000
... More
I274 - Supply, Installation, Testing and Commissioning of 5MP IP Dome Bullet camera with 1 3.0” Progressive Scan CMOS Image Sensor F1.5 Lens 2688 x 1520 resolution0.005 Lux F1.6 color,30 IRE 0 Lux F1.6 IR ON IR Illumination Up to 60m IR Distance , Built in micro SD SDHC SDXC card slot,up to 128 GB,Inbuilt 64 GB micro SD card, DC12V, PoE 802.3 af Class 0 IP67 Ingress Protection IK10 Vanidal Resistance, The prices should include the necessary mounts and brackets.
13
22000
286000
... More
I275 - Supply, Installation and Commissioning of 4MP IP PTZ camera with 1 3 CMOS Sensor 30X Optical Zoom 16X Digital Zoom 120dB WDR Color: 0.05 Lux at F1.6 0 Lux at F1.6 IR on IR Illumination focal length 4.5 mm -135 mm Apperture F1.6 -F4.4 IR Distance UPTO 100Mtr, Video compression H.265 MJPEG H.264 Video Streaming triple streams Resolution 4 MP 2592x1520,RJ45,10100 Mbps Ethernet IPv4 v6, TCP IP, ONVIF 20 users supports 128 GB MicroSD Card nbuilt 64 GB micro SD card, ONVIF Profile S 24 VAC, 3 A 10 , PoE+ 802.3at class 4,The prices should include the necessary mounts and brackets.
1
115000
115000
... More
I276 - NETWORK VIDEO RECORDER NVR : Supply, Installation and Commissioning of 32 Channel NVR , 32 Channels input,1 audio input, 1 audio output, 1HDMI, 1 VGA, Display Split 1 4 8 9 16 25 36, H.265 H.264 MJPEG MPEG4, Resolution should supports up to 8MP, Backup Compatibility USB Device; 1 RJ 45 port 10 100 1000 4 SATA ports, up to 24TB,Power supply Single, 100-240 VAC, 50 60 Hz.
4
35000
140000
... More
I277 - 4TB HDD Surveillance or Enterprise Grade
14
15000
210000
... More
I278 - 24 x 100 1000 GbE Base T 802.3at supported PoE+ Ports + 4 x 1GbE SFP Ports Managed Switch with Layer 2+ Image, 50degree operating temperature support
6
36000
216000
... More
I279 - 16 x 100 1000 GbE Base T 802.3at supported PoE+ Ports 2 x 1GbE SFP Ports Managed Switch with Layer 2+ Image, 50 degree operating temperature support
3
20000
60000
... More
I280 - Supplying and Fixing of patch panel for LAN cabling 24 port 10 100 1000 patch panel
9
8260
74340
... More
I281 - Supplying andfixing of 2mtr cat 6 Patch Cable
96
286
27456
... More
I282 - Rj 45 connector with Crimping with 4 x 4 PVC boxes
96
163
15648
... More
I283 - Supplying and Fixing of sitch mountng rack with power manager and Cable manager. 27U with 650mm depth
4
33755
135021.6
... More
I284 - Supplying and Fixing of sitch mountng rack with power manager and Cable manager. 12U with 450mm depth
3
9276
27830.25
... More
I285 - Supplying and Fixing of sitch mountng rack with power manager and Cable manager. 6U with 450mm depth
4
7325
29303.4
... More
I286 - Supplying and Fixing of Power strip
18
1529
27537.3
... More
I287 - Supplying of shelf
18
868
15630.3
... More
I288 - Supplying and Fixing of Fan
15
1269
19041.75
... More
I289 - Supplying and fixing of Castor wheels to the Shelf set of 4
7
1661
11627.7
... More
I290 - CABLES and CONDUIT Supplying 2 mm thick heavy gauge PVC conduit pipe with suitable size bends metal PVC junction boxes adhesive paste etc..and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wires where ever necessary 25 mm dia 2mm thick
3430
81
280917
... More
I291 - Supplying and drawing UTP CAT 6E LAN cable.
4240
39
169176
... More
I292 - Supplying and Fixing of 32 HD TV with HDMI Cable and Acessories Fixing option Wall Mount and Table Mount both option required
1
30000
30000
... More
I293 - NETWORKING and TELECOMUNICATION Supplying and drawing UTP CAT 6E LAN cable.
5430
39
216657
... More
I294 - Supplying and drawing PVC flexible one pair telephone unarmoured tinned copper cable. 2 Pair
1210
22
26680.5
... More
I295 - Supplying and drawing PVC flexible one pair telephone unarmoured tinned copper cable. 20 Pair
75
85
6378.75
... More
I296 - Supplying and drawing PVC flexible one pair telephone unarmoured tinned copper cable. 20 Pair
100
157
15750
... More
I297 - Supplying and Fixing of sitch mountng rack with power manager and Cable manager. 36U with 650mm depth
3
32955
98865.9
... More
I298 - Supplying and Fixing of sitch mountng rack with power manager and Cable manager. 18U with 450mm depth
3
29815
89447.4
... More
I299 - Supplying and Fixing of sitch mountng rack with power manager and Cable manager. 9U with 450mm depth
4
8899
35599.2
... More
I300 - Supplying and Fixing of sitch mountng rack with power manager and Cable manager. 6U with 450mm depth
2
7325
14651.7
... More
I301 - Supplying fixing of Networking Switches 24 Port 10 100 1000 Switch
6
7785
46714.5
... More
I302 - Supplying fixing of Networking Switches 24 Port Gigabyte manageable
2
43522
87045
... More
I303 - Supplying fixing of Networking Switches 48 Port 10 100 1000 Switch
3
21315
63945
... More
I304 - Supplying fixing of Networking Switches 8 Port 10 100 1000 Switch
2
3255
6510
... More
I305 - Supplying and Fixing of Power strip
12
1529
18358.2
... More
I306 - Supplying of shelf
12
868
10420.2
... More
I307 - Supplying and Fixing of Fan
12
1269
15233.4
... More
I308 - Supplying and fixing of Castor wheels to the Shelf set of 4
6
1102
6615
... More
I309 - Supplying andfixing of I Osocket, face plate with back box Single I O
112
514
57624
... More
I310 - Supplying andfixing of I Osocket, face plate with back box Double I O
33
577
19057.5
... More
I311 - Supplying andfixing of 2mtr cat 6 Patch Cable
143
269
38588.55
... More
I312 - Supplying andfixing of 3mtr cat 6 Patch Cable
143
347
49699.65
... More
I313 - Supplying and Fixing of patch panel for LAN cabling 24 port 10 100 1000 patch panel
11
8295
91245
... More
I314 - Supplying and fixing of modular switch socket stepped electronic fan regulator s dimmer telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293: TV socket
16
154
2469.6
... More
I315 - Supplying and Fixing of 42 HD TV
2
60000
120000
... More
I316 - Supplying and Fixing of 32 HD TV
1
30000
30000
... More
I317 - Supplying and Fixing of 42 HD TV
2
58000
116000
... More
I318 - Supplying and drawing PVC insulated gas injected physical
foam jelly flooded co axial TV cable.RG 6.
600
46
27720
... More
I319 - Supplying and fixing of MDF krone junction box with KRONE Module Telephone cable termination 20 pair krone module with MDF BOX
1
402
402.15
... More
I320 - Supplying and fixing of MDF krone junction box with KRONE Module Telephone cable termination 30 pair krone module with MDF BOX
1
596
596.4
... More
I321 - Supplying and fixing of MDF krone junction box with KRONE Module Telephone cable termination 10 pair krone module with MDF BOX
2
362
724.5
... More
I322 - Supplying and fixing of MDF krone junction box with KRONE Module Telephone cable termination 30 pair krone module with MDF BOX
2
662
1325.1
... More
I323 - Supplying 2 mm thick heavy gauge PVC conduit pipe with suitable size bends metal PVC junction boxes adhesive paste etc..and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wires where ever necessary 25 mm dia 2mm thick
2200
81
180180
... More
I324 - Supply and Fixing of GbESpeed Wifi Router, PoE Support.
16
10000
160000
... More
I325 - 8 x 100 1000 Base T 802.3at supported PoE+ Ports + 2 x 1GbE SFP Ports Managed Switch with SFP Transceiver Module x 2 Nos
2
18000
36000
... More
I326 - 8 x 100 1000 Base T 802.3at supported PoE+ Ports + 2 x 1GbE SFP Ports Managed Switch with SFP Transceiver Module x 2 Nos
2
16000
32000
... More
I327 - EPABX: Supply,Installation,Testing and Commissioning of micro processor based, state of the Art, Telephone PBX System , 2Analog Trunk Lines 25 Analogue Extensions
2
53000
106000
... More
I328 - Analog Phones
2
1750
3500
... More
I329 - Analog Phones
15
1850
27750
... More
I330 - Biometric System Supply,Installation,Testing and Commissioning of Biometric reader with 125kHz EM,
1
15000
15000
... More
I331 - Supply and Fixing of PC , T and A Software,
1
55000
55000
... More
I332 - PA SYSTEM: Supply and Installation of 6W RMSWall Mount Speaker with power taps at 6 4 2 on 100V, 60 15,000 Hz with all Accessories,
30
1882
56479.5
... More
I333 - Supply, Installation, testing and Commissioning of 6Zone Voice alarm Controller with USB, MP3 Player, Including 6Zone Button paging Station with seamless Integration Facility with main fire alarm panel for voice evacuation complete as required.
1
132731
132731.55
... More
I334 - Supply and Installation of 420W Power Amplifier
1
48000
48000
... More
I335 - Supply and Installation of 2C x 1.5 Sqmm
1350
56
76545
... More
I336 - Supplying 2 mm thick heavy gauge PVC conduit pipe with suitable size bends metal PVC junction boxes adhesive paste etc..and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wires where ever necessary 25 mm dia 2mm thick
1200
81
98280
... More
I337 - Supply, installation, testing and commissioning of professional grade audio connectors for inter connection cables with in the rack and other units as well auditorium as required including charges for labour, lead and lifts, loading and unloading, cost of conveyance for all the materials with the accessories required for completion as per the detailed specifications
48
350
16800
... More
I338 - Supplying and Fixing of switch mounting rack with power manager and Cable manager.: 18U with 650mm depth
1
21431
21431.55
... More
I339 - Supplying and Fixing of Power strip
1
1294
1294.65
... More
I340 - Supplying of shelf
2
1004
2009.7
... More
I341 - Supplying, erecting, testing and commissioning of ON LINE UPS system suitable for operation on 230V, 50Hz, A C supply, with isolation transformer all accessories complete and Excluding batteries and wiring complete.: 5 kVA ON LINE UPS
1
71802
71802.15
... More
I342 - Supplying, installation, testing and commissioning of 12V DC, AH batteries in poly propylene container for U.P.S. Sealed maintenance free batteries. 75 80 AH capacity
1
10680
10680.6
... More
I343 - 20 kVA Modular UPS Three Phase Input, Three Phase Output. Supply of 20 KVA UNINTERRUPTED POWER SUPPLY SYSTEM with Moudular type : Digital Technology Three Phase Input, Three Phase Output With bi directional Static and manual by pass Switch .Hot swipable. Supply of Battery Backup 30 Minutes through sealed maintenance free [SMF] Baterries.
3
370000
1110000
... More
I344 - Software monitoring BMS Service Per Battery
3
17000
51000
... More
I345 - Supply of Battery Accessories Battery Breaker, Intererconnecting cables between batteries, Battery stand for housing the batteries and Cables between UPS and Batteries [5 Mtrs. Max]
3
17000
51000
... More
I346 - Installation and commissioning charges.
3
9000
27000
... More
I347 - Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing and fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre 6 litre adjustable to 4 litre 8 litres , including seat cover, and cistern fittings, nuts, bolts and gasket etc complete.
14
11903
166642.7
... More
I348 - Supplying, fixing, testing and commissioning of CP health faucet consisting of: 1 No. 15mm dia CP Angle cock with wall flange. PVC flexible tube of 1.00m long tube with end nuts. Hand operated spray unit instant type CP Crutch etc., complete as directed by the Engineer in charge.
14
2400
33600
... More
I349 - Providing and fixing Toilet paper holder made of Stainless steel with all concealed fitting arrangements and all necessary accesories complete Class Economy
9
889
8007.84
... More
I350 - Providing and fixing Toilet paper holder made of Stainless steel with all concealed fitting arrangements and all necessary accesories complete Class Premium
5
3006
15032.6
... More
I351 - Providing and fixing Robe hook twin made of Stainless steel with all concealed fitting arrangements and all necessary accesories complete Class Economy
34
581
19759.1
... More
I352 - Providing and fixing water closet squatting pan Indian type W.C. pan with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device handle lever conforming to IS : 7231, with all fittings and fixtures
complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
36
5179
186461.28
... More
I353 - Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require. White Vitreous China Surgeon type wash basin of size 660x460 mm with a pair of 15 mm C.P. brass pillar taps with elbow including operated levers
43
4361
187559.12
... More
I354 - Providing and fixing CP Brass 32mm size Bottle Trap of approved quality and make and as per the direction of Engineer in charge.
43
859
36937.43
... More
I355 - Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 g
45
98
4438.35
... More
I356 - Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 15 mm nominal bore with 450 mm length
43
123
5289.86
... More
I357 - Providing and fixing Angle cock medium with wall flange made of Stainless steel with all concealed fitting arrangements and all necessary accesories
complete Class Economy
43
1081
46513.53
... More
I358 - Providing and fixing Liquid soap dispenser made of Stainless steel with all concealed fitting arrangements and all necessary accesories complete Class Economy
24
1851
44439.12
... More
I359 - Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing
not less than 88 g.
24
206
4963.2
... More
I360 - Providing and fixing Side operated Single lever wall mixer with L shaped Tubular bend set for overhead shower made of Stainless steel with all concealed fitting arrangements and all necessary accesories complete Class Economy
29
4097
118835.33
... More
I361 - Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter
29
295
8580.52
... More
I362 - Providing and fixing Soap dish wired with 200mm width made of Stainless steel with all concealed fitting arrangements and all necessary accessories complete Class Economy
29
761
22081.76
... More
I363 - Providing and fixing Towel rail 600mm length made of Stainless steel with all concealed fitting arrangements and all necessary accesories complete Class Economy
29
1338
38812.15
... More
I364 - Providing and fixing Stainless Steel A ISI 304 18 8 kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required 510x1040 mm bowl depth 250 mm
2
5957
11915.78
... More
I365 - Bottle rap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 263 g
2
337
674.48
... More
I366 - Providing and fixing Sink cock with swivel spout and wall flange, wall mountable made of Stainless steel with all concealed fitting arrangements and all necessary accesories complete Class Economy
2
2044
4089.28
... More
I367 - Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre and post flushing with water 250 ml and 500 ml consumption , having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer in charge
14
6615
92615.6
... More
I368 - Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 g.
25
897
22429.5
... More
I369 - Supplying, fixing, testing and commissioning of portable Water Cooler Floor mounted model in corridors for drinking water with all the necessary accessories etc.
6
35000
210000
... More
I370 - Providing and fixing Chlorinated Polyvinyl Chloride CPVC pipes,having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, i c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm dia
470
401
188907.1
... More
I371 - Providing and fixing Chlorinated Polyvinyl Chloride CPVC pipes,having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings This includes jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer in Charge. External work 20mm dia
300
230
69039
... More
I372 - Providing and fixing Chlorinated Polyvinyl Chloride CPVC pipes,having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings This includes jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer in Charge. External work 25mm dia
386
313
121169.26
... More
I373 - Providing and fixing Chlorinated Polyvinyl Chloride CPVC pipes,having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings This includes jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer in Charge. External work 32mm dia
145
394
57203.95
... More
I374 - Providing and fixing Chlorinated Polyvinyl Chloride CPVC pipes,having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings This includes jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer in Charge. External work 40mm dia
300
505
151758
... More
I375 - Providing and fixing Chlorinated Polyvinyl Chloride CPVC pipes,having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings This includes jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer in Charge. External work 50mm dia
90
764
68815.8
... More
I376 - Supply and delivery at site GM copper alloy Gate Valves confirming to Class I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed females ends confirming to IS 554 1990 body hydraulically tested 1.5HP seat standard tested 1 HP with IS mark. For 20 mm dia GM Copper alloy Gate valves
30
941
28251.6
... More
I377 - Supply and delivery at site GM copper alloy Gate Valves confirming to Class I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed females ends confirming to IS 554 1990 body hydraulically tested 1.5HP seat standard tested 1 HP with IS mark. For 25 mm dia GM Copper alloy Gate valves
23
1239
28513.56
... More
I378 - Supply and delivery at site GM copper alloy Gate Valves confirming to Class I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed females ends confirming to IS 554 1990 body hydraulically tested 1.5HP seat standard tested 1 HP with IS mark. For 32 mm dia GM Copper alloy Gate valves
32
1418
45406.4
... More
I379 - Supply and delivery at site GM copper alloy Gate Valves confirming to Class I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed females ends confirming to IS 554 1990 body hydraulically tested 1.5HP seat standard tested 1 HP with IS mark. For 40 mm dia GM Copper alloy Gate valves
7
1590
11135.25
... More
I380 - Supply and delivery at site GM copper alloy Gate Valves confirming to Class I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed females ends confirming to IS 554 1990 body hydraulically tested 1.5HP seat standard tested 1 HP with IS mark. For 50 mm dia GM Copper alloy Gate valves
6
1790
10740.72
... More
I381 - Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm inner dimensions with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover and frame etc. excluding the cost of CI frame and cover FOR WATER SUPPLY VALVE CHAMBER
4
5783
23135.88
... More
I382 - Providing, fixing, testing and commissioning of Lawn hydrant ball valves for gardening of brass body nickel plated with stainless steel ball, lever operated with gun metal nozzel for connecting rubber hose and tested to 20 kg sq.cm. 20 mm dia
12
950
11400
... More
I383 - Supplying , installing, testing and commissioning of brass body nickel plated automatic air release valves with brass splindle, NBR and joinfraniteelastomer, staniless steel spring polypropylenic float at the top most points of watersupply distribution ringmain. Standard make confirming to ISI standards and as per instruction of engineer incharge.
2
2200
4400
... More
I384 - Supplying and fixing in position solid block masonry pedestals of approaximate size 400x230x230mm with brackets and G.I clamps for laying pipes on terrace. etc,. complete as directed by the Engineer in charge.
10
500
5000
... More
I385 - Supplying , installing, testing and commissioning of brass body nickel plated automatic air release valves with brass splindle, NBR and joinfraniteelastomer, staniless steel spring polypropylenic float at the top most points of watersupply distribution ringmain. Standard make confirming to ISI standards and as per instruction of engineer incharge.
6
1650
9900
... More
I386 - Supplying and fixing in position solid block masonry pedestals of approaximate size 400x230x230mm with brackets and G.I clamps for laying pipes on terrace. etc,. complete as directed by the Engineer in charge.
75
600
45000
... More
I387 - Providing and fixing of brassY pot stainer screw type tested to 20 kg sq.cm. 40mm dia at terrace level
1
2400
2400
... More
I388 - Providing and fixing of brass pot stainer screw type tested to 20 kg sq.cm. 50mm dia at terrace level
6
3400
20400
... More
I389 - Supply and fixing of GM ball cock with copper float High pressure float of approved brand of manufacture and fixed on to the inlet pipe at the underground sump tank and OHT. 40 mm dia
6
2800
16800
... More
I390 - Supply and fixing of GM ball cock with copper float High pressure float of approved brand of manufacture and fixed on to the inlet pipe at the underground sump tank and OHT. 32 mm dia
1
1650
1650
... More
I391 - Supplying , installing, testing and commisioning of approved make GM non return valve conforming to IS 778 with necessary unions etc., complete as directed by the Engineer in charge. 40 mm dia
1
4250
4250
... More
I392 - Providing GM copper alloy wheel valves check valve confirming to IS 778 1990 Class I with latest amendments No. 1 and with ISI mark screwed in bonnet integral seat inside, screw, rising spindle screwed female ends confirming to IS 554 1990 body hudraulically tested 1.50 HP seat hydraulically tested 1.00 HP etc. complete. For 32 mm dia GM Copper alloy wheel valves check valve
1
1100
1100.8
... More
I393 - Providing GM copper alloy wheel valves check valve confirming to IS 778 1990 Class I with latest amendments No. 1 and with ISI mark screwed in bonnet integral seat inside, screw, rising spindle screwed female ends confirming to IS 554 1990 body hudraulically tested 1.50 HP seat hydraulically tested 1.00 HP etc. complete. For 40 mm dia GM Copper alloy wheel valves check valve
4
1206
4827.4
... More
I394 - Providing and placing on terrace at all floor levels polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 9Rs Lts Capacity : 2500 Liters
8
23861
190890
... More
I395 - Providing and placing on terrace at all floor levels polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 9Rs Lts Capacity : 1000 Liters
1
9544
9544.5
... More
I396 - Supplying, laying, jointing, testing and commissioning of PVC pipes class III 6 kg sq.cm waste pipe of agricultural series conforming to IS 4985 including all fittings, like Tees, Elbows, Bends, Collars, coupling, etc jointingg with solvent cement followed by application of leak proof adhesive like FRP paste laid on floors inside the toilets to the required slope including making necessary bores in wall foundations concrete slab as applicable, making good the bores with CM 1:3 or cement concrete as applicable, curing etc, complete as directed by the engineer in charge. 40 mm dia
110
310
34100
... More
I397 - Supplying, laying, jointing, testing and commissioning of PVC pipes class III 6 kg sq.cm waste pipe of agricultural series conforming to IS 4985 including all fittings, like Tees, Elbows, Bends, Collars, coupling, etc jointingg with solvent cement followed by application of leak proof adhesive like FRP paste laid on floors inside the toilets to the required slope including making necessary bores in wall foundations concrete slab as applicable, making good the bores with CM 1:3 or cement concrete as applicable, curing etc, complete as directed by the engineer in charge. 50 mm dia
40
390
15600
... More
I398 - Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials excluding cost of specials with jointing of approved type, with all labour with all lead and lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS Contractor will make his own arrangements for procuring water for testing etc. complete For: PVC pipes 75mm dia, 6 kg sqcm and class 3
385
233
89824.35
... More
I399 - Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials excluding cost of specials with jointing of approved type, with all labour with all lead and lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS Contractor will make his own arrangements for procuring water for testing etc. complete For:PVC pipes 110mm dia, 6 kg sqcm and class 3
255
435
111146.85
... More
I400 - Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials excluding cost of specials with jointing of approved type, with all labour with all lead and lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS Contractor will make his own arrangements for procuring water for testing etc. complete For:PVC pipes 160mm dia, 6 kg sqcm and class 4
500
655
327695
... More
I401 - Providing, fixing, testing and commissioning of deep seal PVC multi inlet floor trap of self cleansing design moulded or fabricated with CP grating, rubber ring solvent cement followed by application of leak proof adhesive like FRP paste including making good the floors etc., complete as directed by the Engineer in charge. Standard make confirming to ISI standards,Model as per attached photo catalogue and as per instruction of engineer incharge. 110mm dia inlet 75mm dia out let
87
800
69600
... More
I402 - Providing, fixing, testing and commissioning of deep seal PVC multi inlet floor trap of self cleansing design moulded or fabricated with CP grating, rubber ring solvent cement followed by application of leak proof adhesive like FRP paste including making good the floors etc., complete as directed by the Engineer in charge. Standard make confirming to ISI standards,Model as per attached photo catalogue and as per instruction of engineer incharge. 110mm dia inlet 110mm dia out let
6
900
5400
... More
I403 - Providing, fixing, testing and commissioning of PVC gullytrap of 150 x 150 mm size with 100 mm dia outlet making excavation pit in all kinds of soil and laying of 100 mm thick 1:4:8 mix cement concrete bed and constructing chamber with internal clear dimension of 300 x 300 mm using table moulded wire cut bricks in brick work 115 mm thick in cement mortar 1:4 up to a height of 300 mm above gully trap or up to 100 mm above paving level, plastering internal and external surface with cement mortar 1:4 to 15m thick finishing to smooth inside surface with necessary benching and channelling providing 150 x 150 mm size cast iron grating, including 40 mm thick precast RCC cover slab, clearing the surplus material, earth etc. complete as per drawing. Standard make confirming to ISI standards,Model as per attached photo catalogue and as per instruction of engineer incharge. 150mm x 150mm size P S trap
15
4500
67500
... More
I404 - Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm inner dimensions with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover and frame etc. excluding the cost of CI frame and cover.
24
5783
138815.28
... More
I405 - Construct Brick masonry in CM 1:4, 340 mm thick, with wirecut bricks of approved quality, plaster inside and out side with CM 1:3, 12mm thick, except for the conical surface outside where the plaster thickness shall be 20mm. Slope inside to be 1:6 in the concrete towards central drain and finished smooth. Fixing of pipes in CC 1:2:4 with graded metal of 20mm and down size. Providing and fixing SFRC Machinehole frame and cover Heavy Duty conforming to IS:12592 with latest amendment, in CC 1:2:4. Providing and fixing footsteps made of 12mm dia. steel bars Fe 500 with 3mm thick plastic encapsulation IS 10910 . The footsteps shall be fixed 30cms apart and on CC block embeded to masonry wall. The whole works include watering, curing, barricading, danger lighting, pouring tar over MH frame and cover, cost of tar, shoring, strutting, de watering, engraving Machinehole number with flow direction on the inner conical surface etc. as per the drawing etc. as per technical specifications and for the following diameters and depth etc. for 1.2mm dia: Constructing Brick Masonry Circular Machinehole 1.2 m internal dia.1.2 M depth and SFRC cover and frame
5
33267
166339.45
... More
I406 - Construct Brick masonry in CM 1:4, 340 mm thick, with wirecut bricks of approved quality, plaster inside and out side with CM 1:3, 12mm thick, except for the conical surface outside where the plaster thickness shall be 20mm. Slope inside to be 1:6 in the concrete towards central drain and finished smooth. Fixing of pipes in CC 1:2:4 with graded metal of 20mm and down size. Providing and fixing SFRC Machinehole frame and cover Heavy Duty conforming to IS:12592 with latest amendment, in CC 1:2:4. Providing and fixing footsteps made of 12mm dia. steel bars Fe 500 with 3mm thick plastic encapsulation IS 10910 . The footsteps shall be fixed 30cms apart and on CC block embeded to masonry wall. The whole works include watering, curing, barricading, danger lighting, pouring tar over MH frame and cover, cost of tar, shoring, strutting, de watering, engraving Machinehole number with flow direction on the inner conical surface etc. as per the drawing etc. as per technical specifications and for the following diameters and depth etc. for 1.2mm dia: Constructing Brick Masonry Circular Constructing Brick Masonry Circular Machinehole 1.2 m internal dia.1.4 M depth and SFRC cover and frame
2
38745
77490.74
... More
I407 - Construct Brick masonry in CM 1:4, 340 mm thick, with wirecut bricks of approved quality, plaster inside and out side with CM 1:3, 12mm thick, except for the conical surface outside where the plaster thickness shall be 20mm. Slope inside to be 1:6 in the concrete towards central drain and finished smooth. Fixing of pipes in CC 1:2:4 with graded metal of 20mm and down size. Providing and fixing SFRC Machinehole frame and cover Heavy Duty conforming to IS:12592 with latest amendment, in CC 1:2:4. Providing and fixing footsteps made of 12mm dia. steel bars Fe 500 with 3mm thick plastic encapsulation IS 10910 . The footsteps shall be fixed 30cms apart and on CC block embeded to masonry wall. The whole works include watering, curing, barricading, danger lighting, pouring tar over MH frame and cover, cost of tar, shoring, strutting, de watering, engraving Machinehole number with flow direction on the inner conical surface etc. as per the drawing etc. as per technical specifications and for the following diameters and depth etc. for 1.2mm dia: Constructing Brick Masonry Circular Constructing Brick Masonry Circular Machinehole 1.2 m internal dia.1.6 M depth and SFRC cover and frame
2
44082
88165.72
... More
I408 - Construct Brick masonry in CM 1:4, 340 mm thick, with wirecut bricks of approved quality, plaster inside and out side with CM 1:3, 12mm thick, except for the conical surface outside where the plaster thickness shall be 20mm. Slope inside to be 1:6 in the concrete towards central drain and finished smooth. Fixing of pipes in CC 1:2:4 with graded metal of 20mm and down size. Providing and fixing SFRC Machinehole frame and cover Heavy Duty conforming to IS:12592 with latest amendment, in CC 1:2:4. Providing and fixing footsteps made of 12mm dia. steel bars Fe 500 with 3mm thick plastic encapsulation IS 10910 . The footsteps shall be fixed 30cms apart and on CC block embeded to masonry wall. The whole works include watering, curing, barricading, danger lighting, pouring tar over MH frame and cover, cost of tar, shoring, strutting, de watering, engraving Machinehole number with flow direction on the inner conical surface etc. as per the drawing etc. as per technical specifications and for the following diameters and depth etc. for 1.2mm dia: Constructing Brick Masonry Circular Constructing Brick Masonry Circular Machinehole 1.2 m internal dia.1.8 M depth and SFRC cover and frame
3
47603
142811.16
... More
I409 - Construct Brick masonry in CM 1:4, 340 mm thick, with wirecut bricks of approved quality, plaster inside and out side with CM 1:3, 12mm thick, except for the conical surface outside where the plaster thickness shall be 20mm. Slope inside to be 1:6 in the concrete towards central drain and finished smooth. Fixing of pipes in CC 1:2:4 with graded metal of 20mm and down size. Providing and fixing SFRC Machinehole frame and cover Heavy Duty conforming to IS:12592 with latest amendment, in CC 1:2:4. Providing and fixing footsteps made of 12mm dia. steel bars Fe 500 with 3mm thick plastic encapsulation IS 10910 . The footsteps shall be fixed 30cms apart and on CC block embeded to masonry wall. The whole works include watering, curing, barricading, danger lighting, pouring tar over MH frame and cover, cost of tar, shoring, strutting, de watering, engraving Machinehole number with flow direction on the inner conical surface etc. as per the drawing etc. as per technical specifications and for the following diameters and depth etc. for 1.2mm dia: Constructing Brick Masonry Circular Constructing Brick Masonry Circular Machinehole 1.2 m internal dia.2.0 M depth and SFRC cover and frame
2
64461
128922.86
... More
I410 - Earth work excavation for pipeline cables by manual means upto 600mm trench width as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting and stacking the selected earth for reuse in a radius of 50 m. filling available excavated earth excluding rock in trenches, plinth, sides of foundatings etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage and other appurtenances required to complete the work.in all kinds of soils. Depth upto 1.5m
610
513
313100.8
... More
I411 - Filling available excavated earth excluding rock in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and
watering, lead up to 50 m and lift upto 1.5 m.
520
282
146686.8
... More
I412 - Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials excluding cost of specials with jointing of approved type, with all labour with all lead and lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS Contractor will make his own arrangements for procuring water for testing etc. complete For: PVC pipes 75mm dia, 6 kg sqcm and class 3
29.89
233
6973.6359
... More
I413 - Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials excluding cost of specials with jointing of approved type, with all labour with all lead and lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS Contractor will make his own arrangements for procuring water for testing etc. complete For: PVC pipes 110mm dia, 6 kg sqcm and class 3
30
435
13076.1
... More
I414 - Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials excluding cost of specials with jointing of approved type, with all labour with all lead and lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS Contractor will make his own arrangements for procuring water for testing etc. complete For: PVC pipes 160mm dia, 6 kg sqcm and class 4
759.98
655
498083.2922
... More
I415 - Providing, fixing, testing and commissioning of PVC rain water head khurras dome type grating with puddle flange to fix head in RCC slab specially fabricated from minimum 4mm thick PVC sheet, including removable heavy duty PVC grating of 50 x 3 mm thick PVC flats Round or Square as per approved design The quoted rate shall include for necessary grouting the khurras base with approved sealant complete all as shown in the drawing and as specified. Standard make confirming to ISI standards,Model as per attached photo catalogue and as per instruction of engineer incharge. 150 x 150mm PVC Grating
32
1800
57600
... More
I416 - Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm inner dimensions with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover and frame etc. excluding the cost of CI frame and cover. FOR RAIN WATER CHAMBER
32
5783
185087.04
... More
I417 - Rain harvest pit of size 1200 mm dia and 3.50 m deep is proposed to be constructed. The rain water harvest pit consists of 300 mm deep RCC precast rings along with 50mm dia holes from the invert level of percolation pit. The pit outer wall is constructed in precast RCC and crushed stone of 200mm thick all around it on PCC bed of 1:4:8 ratio. The first layer for 600mm thick is left hollow with 50mm dia holes around it. The second layer for 600mm thick is filled with 40mm gravel filling. The third layer for 600mm thick is filled with 65mm gravel filling. The fourth layer for 900mm thick is filled with brick bats. Finally the top of rain harvest pit is covered with RCC precast slab with perforation of min 50 mm dia in strip of size 2’0’ wide, to allow entry of surface ground level rainwater.
8
35000
280000
... More
I418 - Supply and delivery of Centrifugal pumpset at site brand new best make and with discharge duty confirming to ISI standards and its latest amendments. 3 HP, size 50x40 Head 30M, Discharge 198 LPM
8
20002
160016.72
... More
I419 - Supplying, installation, testing and commissioning of solar hot water heater comprising of solar Flat Plate Collector FPC of size 2120x1040x100mm and stainlesssteel hot water storage tank with stainlesssteel heat exchanger absorber made of copper sheet and copper tube of following capacity aluminium box collector with appropriate capacity electrical backup arrangement excluding inlet and outlet pipes.SS Model with 100mm thick of 48Kg M3density Rock wool insulation with 22SWG Aluminium cladding. 300 Liters
10
69986
699860
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%