The Fertilisers And Chemicals Travancore Limited Tender
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
Costs
EMD
₹ 35,10,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Construction Of School Buildings, Staff Quarters And Other Facilities Including Electrical Works For Kendriya Vidyalaya At Haveri, Karnataka.
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_FACT_806473_1Bid Award Id
ViewTender No
8001/2024-2025/E29456Tender Authority
The Fertilisers And Chemicals Travancore Limited ViewPurchaser Address
-Website
http://eprocure.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
DSR 2021 CODE NO:2.31: Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared.
5323
96026
-
... More
DSR 2021 CODE NO:2.1.1: Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge in All kinds of soil
14191
1888964
-
... More
DSR 2021 CODE NO:2.6.1 : Earth work in excavation by mechanical means (Hydralic excavator/manual means)over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, lead upto 50m and for all lifts, as directed by Engineer - in Charge : All kinds of soil
2977
551846
-
... More
DSR 2021 CODE NO:2.7.1 : Earth work in excavation by mechanical means (Hydralic excavator/manual means)over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, lead upto 50m and lift upto 1.5m, as directed by Engineer - in Charge Ordinary rock
138
70894
-
... More
DSR 2021 CODE NO:2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottoms , for all lifts , including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m in All kinds of soil
1194
324708
-
... More
DSR 2021 CODE NO:2.9.1 : Earth work in excavation by mechanical means (Hydralic excavator/manual means) in foundation trenches or drains (not exceeding 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottoms , lift upto 1.5m , including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m: Ordinary rock
2
1302
-
... More
DSR 2021 CODE NO:1.1.2 : Carriage of material by mechanical transport including loading, unloading and stacking: Earth Upto 20 Km.(Beyond 10 Km. upto 20 Km.)
82
53659
-
... More
DSR 2021 CODE NO:1.1.2 : Carriage of material by mechanical transport including loading, unloading and stacking: Earth Upto 1 Km.
1225
274926
-
... More
DSR 2021 CODE NO:1.1.4 : Carriage of material by mechanical transport including loading, unloading and stacking: Excavated Rock Upto 1 Km.
131
47038
-
... More
DSR 2021 CODE NO:2.3.1 : Banking excavated earth in layers not exceeding 20 cm in depth, breaking clods, watering, rolling each layer with ½ tonne roller, or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up, in embankments for roads, flood banks, marginal banks, and guide banks etc., lead upto 50 m and lift upto 1.5 m :All kinds of soil
1217
246941
-
... More
DSR 2021 CODE NO:2.25 : Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50m and for all lift.
2700
542808
-
... More
DSR 2021 CODE NO:2.26.1 : Extra for every additional lift of 1.5 m or part thereof in excavation/banking excavated or stacked materials: All kinds of soil.
5799
753870
-
... More
DSR 2021 CODE NO:2.26.2 : Extra for every additional lift of 1.5 m or part thereof in excavation/banking excavated or stacked materials: Ordinary or Hard rock
305
71107
-
... More
DSR 2021 CODE NO:2.27 : Supplying and filling in plinth with sand under floors including, watering, ramming consolidating and dressing complete.
291
782400
-
... More
DSR 2021 CODE NO:4.1.3 : Providing and laying in position cement concrete of grade 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size),excluding the cost of centring and shuttering - All work upto plinth level
3
27488
-
... More
DSR 2021 CODE NO:4.1.8 : Providing and laying in position cement concrete of grade 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), excluding the cost of centring and shuttering - All work upto plinth level
471
3706765
-
... More
DSR 2021 CODE NO:4.1.6 : Providing and laying in position cement concrete of grade 1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 40 mm nominal size), excluding the cost of centring and shuttering - All work upto plinth level
22
182560
-
... More
DSR 2021 CODE NO:4.1.10 : Providing and laying in position cement concrete of grade 1:5:10 (1 Cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) , excluding the cost of centring and shuttering - All work upto plinth level
446
3357211
-
... More
DSR 2021 CODE NO:4.1.11 : Providing and laying in position cement concrete of grade 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), excluding the cost of centring and shuttering - All work upto plinth level: 40 mm thick
70
492936
-
... More
DSR 2021 CODE NO:4.2.3 : Providing and laying cement concrete in retaining walls, return walls,walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets,sunken floors etc. up to floor five level, excluding the cost of centering, shuttering and finishing : 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
30
337661
-
... More
DSR 2021 CODE NO:4.2.8 : Providing and laying cement concrete in retaining walls, return walls,walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets etc. up to floor five level, excluding the cost of centering, shuttering and finishing : 1:5:10 (1 cement : 5 coarse sand (zone-III) : 10 graded stone aggregate 40 mm nominal size).
13
124848
-
... More
DSR 2021 CODE NO:4.10 : Providing and laying damp-proof course 40 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand(zone -III) : 4 graded stone aggregate 12.5 mm nominal size)
316
145789
-
... More
DSR 2021 CODE NO:4.13 : Applying a coat of residual petroleum bitumen of penetration VG 10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
316
44758
-
... More
DSR 2021 CODE NO:4.17 : Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including necessary excavation, levelling & dressing & finishing the top smooth.
891
755576
-
... More
DSR 2021 CODE NO:5.33.1.1:Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.
Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.concrete of M25 grade with minimum cement content of 330 kg /cum:
All work upto plinth level
424
4580548
-
... More
DSR 2021 CODE NO:5.33.2.1:Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.
Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.:Concrete of M25 grade with minimum cement content of 330 kg /cum :
All work above plinth level upto floor V level
1397
15580321
-
... More
DSR 2021 CODE NO:5.33.1.2:Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.
Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.: All works upto plinth level :
Concrete of M30 grade with minimum cement content of 350 kg /cum
1024
11242772
-
... More
DSR 2021 CODE NO:5.33.2.2:Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.
Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.: All works above plinth level upto floor V level :
Concrete of M30 grade with minimum cement content of 350 kg /cum
288
3262708
-
... More
DSR 2021 CODE NO:5.35: Add for using extra cement in items of design mix over and above the specified cement content therein
2160
1849975
-
... More
DSR 2021 CODE NO:5.1.2 : Providing and laying in position reinforced cement concrete of grade 1:1.5:3 (1 Cement :1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), excluding the cost of centering and shuttering - All work upto plinth level
192
1997871
-
... More
DSR 2021 CODE NO:5.2.2 : Providing and laying in position reinforced cement concrete of grade 1:1.5:3 (1 Cement :1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), excluding the cost of centring and shuttering - All work above plinth level
54
662502
-
... More
DSR 2021 CODE NO:5.9.1 :Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns including beams etc. for mass concrete
2238
924629
-
... More
DSR 2021 CODE NO:5.9.2 :Centering and shuttering including strutting, propping etc. and removal of form for Walls ( any thickness) including attached pilasters, butteresses, plinth and string courses etc.
166
144972
-
... More
DSR 2021 CODE NO:5.9.3 :Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform
5464
5210634
-
... More
DSR 2021 CODE NO:5.9.4 :Centering and shuttering including strutting, propping etc. and removal of form for Shelves ( Cast in situ)
179
170699
-
... More
DSR 2021 CODE NO:5.9.5 :Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers
6914
5232653
-
... More
DSR 2021 CODE NO:5.9.6 :Centering and shuttering including strutting, propping etc. and removal of form for Columns, pillars, piers, abutments, posts and struts
4834
4836610
-
... More
DSR 2021 CODE NO:5.9.7 :Centering and shuttering including strutting, propping etc. and removal of form for Stairs,(excluding landings) except spiral-staircases.
150
122742
-
... More
DSR 2021 CODE NO:5.9.19 :Centering and shuttering including strutting, propping etc. and removal of form for Weather shade, chajjas, corbels etc including edges
88
89218
-
... More
DSR 2021 CODE NO:5.11.1 : Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and de- centering at all levels, over a height of 3.5 m, for every additional height of 1 meter or part thereof (Plan area to be measured) : Suspended floors, roofs, landing, beams and balconies (Plan area to be measured).
560
222415
-
... More
DSR 2021 CODE NO:5.15 :Providing, transporting, hoisting and fixing upto floor five level precast reinforced cement concrete in lintels, beams and bressumers including setting in cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering and shuttering but excluding the cost of reinforcement with 1:1.5:3 (1 cement: 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size).
29
450595
-
... More
DSR 2021 CODE NO:5.16 :Providing,transporting and laying in position precast reinforced cement concrete in perforated drain covers including setting in position with cement mortar 1 :3 cost of centering, shuttering and finishing smooth with 6 mm plaster upto floor V Level : 1:1.5:3 (1 Cement :1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)
6
134644
-
... More
DSR 2021 CODE NO:5.22.6 : Steel Reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level : Thermo-Mechanically Treated bars of grade Fe 500 D or more
205430
22911607
-
... More
DSR 2021 CODE NO:5.22A.6 : Steel Reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level : Thermo-Mechanically Treated bars of grade Fe 500 D or more
323533
36083635
-
... More
DSR 2021 CODE NO:5.18.1 : Providing precast cement concrete Jali 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 fine sand) etc. complete excluding plastering of the jambs, sills and soffits: 50 mm thick
274
538886
-
... More
DSR 2021 CODE NO:5.30 : Add or deduct for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.
398
32035
-
... More
DSR 2021CODE NO:5.31 :Extra for laying reinforced cement concrete in or under water and/ or liquid mud including cost of pumping or bailing out water and removing slush etc., complete.
Note For Item No. 5.31:- The quantity will be calculated by multiplying the depth measured from the subsoil water level up to the centre of gravity of the R.C.C. under subsoil water with the quantity of R.C.C. in cubic metre executed under subsoil water. The depth of centre of gravity shall be reckoned correct to 0.1 m. 0.05 m or more shall be taken as 0.1 m and less than 0.05 m ignored. No extra payment shall be made for placing reinforcement or centering& shuttering under sub - soil water conditions.
20
22530
-
... More
DSR 2021 CODE NO:6.1.1 : Brick work with common burnt clay FPS ( non modular )bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4( 1 cement : 4 coarse sand )
383
3279104
-
... More
DSR 2021 CODE NO:6.4.2 : Brick work with common burnt clay FPS ( non modular ) bricks of class designation 7.5 in Superstructure above plinth upto floor V level in all shapes and sizes in cement mortar 1:6 (1 cement : 6 coarse sand)
2025
20880200
-
... More
DSR 2021 CODE NO:6.13.2 : Half brick masonry with common burnt clay FPS ( non modular ) bricks of class designation 7.5 in Superstructure above plinth upto floor V level in Cement mortar 1:4 (1 cement : 4 coarse sand)
2599
3291685
-
... More
DSR 2021 CODE NO:6.15 : Extra for providing and placing in position 2 Nos. 6mm dia MS bars at every 3rd course of half brick masonry
163
17530
-
... More
DSR 2021 CODE NO:6.32.1 : Brickwork with clay fly ash F.P.S (non modular) brick of class designation 7.5 in superstructure above plinth level up to floor five level in : Cement mortar 1:4 (1 cement : 4 coarse sand)
55
575758
-
... More
DSR 2021 CODE NO:6.45.2 : Half brick masonary with non modular fly ash bricks of class designation 10, conforming to IS : 12894, in super structure above plinth and upto floor V level in Cement mortar 1:4 (1 cement : 4 coarse sand)
20
24126
-
... More
DSR 2021 CODE NO:7.1.1 : Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand)
3
24831
-
... More
DSR 2021 CODE NO:8.2.1.2 : Providing and fixing 18 mm thick gang saw cut mirror polished, machine cut for kitchen platforms, vanity counters facias and fimilar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand ) with joints treated with white cement , mixed with matching pigment, epoxy touch ups, including rubbing, curing etc. complete at all levels: Raj nagar plain white marble/udaipur green marble /zebra black marble and shade area of slab over 0.50 sqm
5
16418
-
... More
DSR 2021 CODE NO:8.2.2.2 : Providing and fixing 18 mm thick gang saw cut mirror polished, machine cut for kitchen platforms, vanity counters facias and fimilar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand ) with joints treated with white cement , mixed with matching pigment, epoxy touch ups, including rubbing, curing etc. complete at all levels: Granite of any colour and shade area of slab over 0.50 sqm
5
27527
-
... More
DSR 2021 CODE NO:8.3.1 :Providing edge moulding to 18mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge: in Marble work
17
5179
-
... More
DSR 2021 CODE NO:8.3.2 :Providing edge moulding to 18mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge :in Granite work
8
4168
-
... More
DSR 2021 CODE NO:8.4 : Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete.
8
4732
-
... More
DSR 2021 CODE NO:8.5 : Extra for providing opening of required size & shape for wash basins/kitchen sink in kitchen platform, vanity counters and similar location in marble/stone work including necessary holes for pillar taps etc .including rubbing and polishing of cut edges etc. complete.
1
1005
-
... More
DSR 2021 CODE NO:8.10.1 : Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth:White Agaria Marble stone
18
68549
-
... More
DSR 2021 CODE NO:9.20.1 : Providing and fixing ISI marked flush door shutters decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
5
19196
-
... More
DSR 2021 CODE NO:9.21.1 : Providing and fixing ISI marked flush door shutters non -decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
409
1025657
-
... More
DSR 2021 CODE NO:9.23 : Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of shutters (over all area of door shutter to be measured)
414
206739
-
... More
DSR 2021 CODE NO:9.24.1 : Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured): Rectangular or square
288
62323
-
... More
DSR 2021 CODE NO:9.46.3 : Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete :25mm dia
104
62401
-
... More
DSR 2021 CODE NO:9.48.1 : Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete: Fixed to steel windows by welding
6747
1519289
-
... More
DSR 2021 CODE NO:9.79.3 : Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete: 65mm
45
17525
-
... More
DSR 2021 CODE NO:9.84 : Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete
4
4261
-
... More
DSR 2021 CODE NO:9.96.1 : Providing and fixing aluminium sliding door bolts, ISI marked anodised anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16mm
177
57317
-
... More
DSR 2021 CODE NO:9.97.2 : Providing and fixing aluminium tower bolts ISI marked anodised ( anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete- 250 X 10 mm
203
26365
-
... More
DSR 2021 CODE NO:9.97.3 : Providing and fixing aluminium tower bolts ISI marked anodised ( anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete- 200X 10 mm
203
22930
-
... More
DSR 2021 CODE NO:9.97.4 : Providing and fixing aluminium tower bolts ISI marked anodised ( anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete- 150X 10 mm
82
7707
-
... More
DSR 2021 CODE NO:9.100.1 : Providing and fixing aluminium handles ISI marked anodised ( anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete- 125 mm
406
30328
-
... More
DSR 2021 CODE NO:9.100.2 : Providing and fixing aluminium handles ISI marked anodised ( anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete- 100 mm
85
5631
-
... More
DSR 2021CODE NO:9.101.2 : Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete: Twin rubber stopper
200
15488
-
... More
DSR 2021 CODE NO:9.103 : Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of Aluminium lever handles with necessary screws etc. complete ( best make of approved quality)
28
25770
-
... More
DSR 2021 CODE NO:9.119 : Providing and fixing factory made PVC door frame of size 50x47 mm with a wall thickness of 5 mm. made out of extruded 5 rigid PVC foam sheet mitred at corners and joined with 2 Nos. of 150 mm long brackets of 15x15mm M.S. square tube, the vertical door profiles to be reinforced with 19x19 mm M.S. squire tube of 19 guage,EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size complete as per manufactures specification and direction of Engineer-in-charge
110
55867
-
... More
DSR 2021 CODE NO:9.120.2 : Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frameshall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction ofEngineer-in-charge, manufacturer's specification & drawing : 30 mm thick prelaminated PVC door shutters
35
106900
-
... More
DSR 2021 CODE NO:9.135.2 : Providing and fixing fly proof stainless steel grade 304 wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.50 mm all complete: With 12 mm mild steel U beading
497
650294
-
... More
DSR 2021 CODE NO:9.159 : Providing and fixing 25mm thick pre-laminated medium density fibre board exterior grade (Grade-I) IS:14587:1998 marked one side decorative and other side balancing lamination for cupboard shutters edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand including ISI marked nickel plated bright finishing M.S. piano hinges conforming to IS:3818 marked with necessary screw etc all complete
109
256410
-
... More
DSR 2021 CODE NO:10.1 : Structural steel work in single section fixed without connecting plate including cutting hoisting, fixing in position & applying priming coat of approved steel primer all complete.
7550
873988
-
... More
DSR 2021 CODE NO:10.2 : Structural steel work riveted or bolted in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete:
10644
1482389
-
... More
DSR 2021 CODE NO:10.3 : Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5 mm size with top and bottom rail of T-iron 40x40x6mm with 40mm dia, steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer.
13
151981
-
... More
DSR 2021 CODE NO:10.5.1 : Providing and fixing 1mm thick M.S. sheet door with frame of 40x40xmm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer: Using M.S. angels 40x40x6mm for diagonal braces.
29
172493
-
... More
DSR 2021 CODE NO:10.6.1 : Supplying and fixing rolling shutters of approved make, made of required size M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5cm long wire springs grade No.2 and M.S. top cover of required thickness for rolling shutters: 80x1.25 mm M.S. laths with 1.25 mm thick top cover
38
142238
-
... More
DSR 2021 CODE NO:10.7 : Providing and fixing ball bearing for rolling shutters.
14
7388
-
... More
DSR 2021 CODE NO:10.11.1 : Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D, F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment): Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
6555
1432398
-
... More
DSR 2021 CODE NO:10.15.1 : Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer: Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
2263
412590
-
... More
DSR 2021 CODE NO:10.14.2.1 : Providing and fixing pressed steel door frames conforming to IS: 4351,manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strikeplate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineerin-charge: Profile C Fixing with adjustable lugs with split end tail to each jamb
1656
970846
-
... More
DSR 2021 CODE NO:10.14.3.1 : Providing and fixing pressed steel door frames conforming to IS: 4351,manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strikeplate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineerin-charge: Profile E Fixing with adjustable lugs with split end tail to each jamb
74
47079
-
... More
DSR 2021 CODE NO:10.18 : Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp of internal dia 140mm, 73mm height, top lid of 1.5mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3mm dia. round headed screws, one lock at the corners. Clamp shall be made of 12mm dia M.S. bar bent to shape as per standard drawing.
281
64742
-
... More
DSR 2021CODE NO:10.25.2 : Steel work welded in built-up section/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required : In gratings, frames, guard bar, ladders, balcony and staircase railings, brackets, gates and similar works
8460
1497673
-
... More
DSR 2021 CODE NO:10.30.2 : Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with :5.5 mm thick glass panes
363
561557
-
... More
DSR 2021 CODE NO:11.3.1 : Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete: 40 mm thick with 20 mm nominal size stone aggregate
294
199334
-
... More
DSR 2021 CODE NO:11.4 :52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size)by volume with which Hardcrete hardening compound of Snowcem India Ltd. or equivalent is mixed @ 2 litreHardcrete per 50kg of cement including cement slurry, but excluding the cost of nosing of steps etc. complete.
800
851832
-
... More
DSR 2021 CODE NO:11.6.1 : Cement plaster skirting (upto 30cm height) with cement mortar 1:3 (1 cement 3 coarse sand) finished with a floating coat of neat cement : 18mm thick
32
22721
-
... More
DSR 2021 CODE NO:11.11.1 : 40mm thick marble chips flooring, rubbed and polished to granolithic finish, under layer 28mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size) and top layer 12mm thick with white, black, chocolate, grey yellow or green marble chips of sizes from 7mm to 10mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 2:3 (2 cement marble powder mix : 3 marble chips) by volume including cement slurry etc. complete :Dark shade pigment with ordinary cement.
291
346019
-
... More
DSR 2021 CODE NO:11.11.2 : 40mm thick marble chips flooring, rubbed and polished to granolithic finish, under layer 28mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size) and top layer 12mm thick with white, black, chocolate, grey yellow or green marble chips of sizes from 7mm to 10mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 2:3 (2 cement marble powder mix : 3 marble chips) by volume including cement slurry etc. complete :Light shade pigment with white cement
153
193272
-
... More
DSR 2021 CODE NO:11.12.1.1 : Marble chips skirting (upto 30 cm height) rubbed and polished to granolithic finish, top layer 6mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from smallest to 4 mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 marble chips) by volume : 18 mm thick with under layer 12 mm thick cement plaster 1:3 (1 cement : 3 coarse sand)- Dark shade pigment with ordinary cement.
30
58360
-
... More
DSR 2021 CODE NO:11.12.1.2 : Marble chips skirting (upto 30 cm height) rubbed and polished to granolithic finish, top layer 6mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from smallest to 4 mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 marble chips) by volume : 18 mm thick with under layer 12 mm thick cement plaster 1:3 (1 cement : 3 coarse sand)- Light shade pigment with white cement.
16
31718
-
... More
DSR 2021 CODE NO:11.13.1 : Providing and fixing glass strips in joints of terrazo/ cement concrete floors :40 mm wide and 4 mm thick
2528
250019
-
... More
DSR 2021 CODE NO:11.19.1 : Chequered terrazo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete on 20 mm thick bed of cement mortar 1:4(1 cement :4 coarse sand):Light shade pigment cement without any pigment.
146
235251
-
... More
DSR 2021 CODE NO:11.24 : Extra for pre finished nosing to treads of steps of stone marble stone
100
73810
-
... More
DSR 2021 CODE NO:11.25 : Extra for marble stone flooring in treads of steps and risers using single length up to 2.00 metre
50
43635
-
... More
DSR 2021 CODE NO:11.26.1 : Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick
4299
9127249
-
... More
DSR 2021 CODE NO:11.27 : Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
458
1161524
-
... More
DSR 2021 CODE NO:8.31 : Providing and fixing Istquallity ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
991
1311093
-
... More
DSR 2021 CODE NO:11.40 : Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete.
268
408458
-
... More
DSR 2021 CODE NO:12.22 : Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
72
23880
-
... More
DSR 2021 CODE NO:12.41.1 : Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes: 75 mm diameter
147
38952
-
... More
DSR 2021 CODE NO:12.41.2 : Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes: 110 mm diameter
1168
464618
-
... More
DSR 2021 CODE NO:12.42.1.1 : Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion: Coupler -75 mm diameter
11
1092
-
... More
DSR 2021 CODE NO:12.42.1.2 : Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion : Coupler- 110 mm diameter
272
40590
-
... More
DSR 2021 CODE NO:12.42.2.1 : Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion : Single Push fit coupler - 75 mm diameter
51
5063
-
... More
DSR 2021 CODE NO:12.42.2.2 : Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion : Single Push fit coupler - 110 mm diameter
251
34535
-
... More
DSR 2021 CODE NO:12.42.4.1 : Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion : Single tee without door-75x75x75 mm
83
12824
-
... More
DSR 2021 CODE NO:12.42.4.2 : Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion : Single tee without door-110x110x110 mm
136
32272
-
... More
DSR 2021 CODE NO:12.42.6.1 : Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion- Shoe (Plain) 75 mm dia
14
1412
-
... More
DSR 2021 CODE NO:12.42.6.2 : Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion- Shoe (Plain) 110 mm dia
70
10097
-
... More
DSR 2021 CODE NO:12.42.5.1 : Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion : Bend 87.5° -75 mm bend
25
2855
-
... More
DSR 2021 CODE NO:12.42.5.2 : Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion : Bend 87.5° -110 mm bend
210
34486
-
... More
DSR 2021 CODE NO:12.43.1 : Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand)and making good the wall etc. complete: 75 mm
106
40992
-
... More
DSR 2021 CODE NO:12.43.2 : Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand)and making good the wall etc. complete: 110 mm
960
369638
-
... More
DSR 2021 CODE NO:12.50 :Providing and fixing precoatedgalvainsed iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge)of total coated thickness 0.50 mm(base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm), with Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling / self tapping screws of size (5.5x 55mm) with EPDM seal ,complete upto any pitch in horizontal or vertical or curved surface, excluding the cost of purlins, rafters and truss and including cutting to size and shape wherever required.
420
350889
-
... More
DSR 2021 CODE NO:12.51.1 :Providing and fixing precoated galvanised steel sheet roofing accessories total coated thickness 0.50 mm(base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm), with Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500-600mm).
58
32513
-
... More
DSR 2021 CODE NO:12.51.6 :Providing and fixing precoated galvanised steel sheet roofing accessories total coated thickness 0.50 mm(base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm), with Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete:Gutter. (600 mm over all girth).
115
158889
-
... More
DSR 2021 CODE NO:13.1.1 :12mm cement plaster of mix: 1:4 ( 1 cement : 4 fine sand)
13174
4832354
-
... More
DSR 2021 CODE NO:13.1.2 : 12mm cement plaster of mix: 1:6 ( 1 cement : 6 fine sand)
2192
769019
-
... More
DSR 2021 CODE NO:13.2.1 : 15mm cement plaster of mix: 1:4 ( 1 cement : 4 fine sand)
12214
5161758
-
... More
DSR 2021 CODE NO:13.2.2 : 15mm cement plaster of mix: 1:6 ( 1 cement : 6 fine sand)
1478
596299
-
... More
DSR 2021CODE NO:13.16.1 : 6mm cement plaster to ceiling of mix:1:3 (1 cement : 3 fine sand)
6536
2057598
-
... More
DSR 2021 CODE NO:13.9.1 : Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement:12 mm cement plaster
77
37028
-
... More
DSR 2021 CODE NO:13.21 : Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers
730
54990
-
... More
DSR 2021 CODE NO:13.22 : Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof.
20
1811
-
... More
DSR 2021 CODE NO:13.26 : Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete:
624
166358
-
... More
DSR 2021 CODE NO:13.37 : White washing with lime to give an even shade :New work(three or more coats)
6455
260588
-
... More
DSR 2021 CODE NO:13.39.1 : Colour washing such as green, blue or buff to give an even shade :New work (two or more coats) with a base coat of white washing with lime :
38
2091
-
... More
DSR 2021 CODE NO:13.41.1 : Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two or more coats) over and including water tinnable priming coat with cement primer:
14143
2859997
-
... More
DSR 2021 CODE NO:13.44.1 : Finishing walls with water proofing cement paint of required shade :New work (Two or more coats applied @ 3.84 kg/10 sqm)
4291
521013
-
... More
DSR 2021 CODE NO:13.47.1 : Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade :New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)
9596
1938104
-
... More
DSR 2021 CODE NO:13.50.1 : Applying priming coat :With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)
976
74615
-
... More
DSR 2021 CODE NO:13.50.3 : Applying priming coat :With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works
1685
116349
-
... More
DSR 2021 CODE NO:13.50.4 : Applying priming coat :With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel work (second coat)
1685
62361
-
... More
DSR 2021 CODE NO:13.83.2 : Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour: Two Coats
10
1512
-
... More
DSR 2021 CODE NO:13.60.1 : Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work.
10
1714
-
... More
DSR 2021 CODE NO:13.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work.
2933
479633
-
... More
DSR 2021 CODE NO:13.68 : French spirit polishing two or more coats on new works including a coat of wood filler complete
12
5498
-
... More
DSR 2021 CODE NO:13.80 : Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete
9069
1397351
-
... More
DSR 2021 CODE NO:21.1.1.2 : Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with dash fasteners of required dia and size , including necessary filling up of gaps at junctions,ie at top, bottom and sides with required EPDM rubber or neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteers to be paid for separately): For fixed portion : Powder coated aluminium (minimum thickness of powder coating 50 micron)
46
26685
-
... More
DSR 2021 CODE NO:21.1.2.2: Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with dash fasteners of required dia and size , including necessary filling up of gaps at junctions,ie at top, bottom and sides with required EPDM rubber or neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteers to be paid for separately): For shutters of doors,windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately).: Powder coated aluminium (minimum thickness of powder coating 50 micron)
681
468970
-
... More
DSR 2021 CODE NO:21.3.2 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)
38
62664
-
... More
DSR 2021 CODE NO:21.16.3 Providing and fixing aluminium round shape handle of outer dia 100mm with SS screws etc. Complete as per direction of Engineer-in-charge: Polyester powder coated minimum thickness 50 micron aluminium.
10
1147
-
... More
DSR 2021 CODE NO:22.3: Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting
of: (i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.
(ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.
(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm).
231
222501
-
... More
DSR 2021 CODE NO:22.22A Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/ system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in-Charge.
3197
1885814
-
... More
DSR 2021 CODE NO:22.4.1: Providing and Placing in position suitable PVC water stops conforming to IS:12200 for construction/ expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc. complete :Serrated with central bulb (225 mm wide, 8-11 mm thick)
85
30200
-
... More
DSR 2021 CODE NO:26.40 Providing and fixing hard drawn steel wire fabric of size 75 x25 mm mesh or other suitable size wire mesh to be fixed & firmly anchored to the concrete surface by means of "L" shaped mild steel shear key welded with existing reinforcement including the cost of materials, labour, tool & plants as approved by Engineer-in-charge
330
336972
-
... More
NON DSR ITEM : Providing and laying 2 mm thick PVC flooring tiles of approve shade and make in computer lab
148
165908
-
... More
NON DSR ITEM : Providing and laying acid resistant tiles over 20 mm cement mortar 1:4 subbase of approved make and shade in chemistry lab shelves
8
16992
-
... More
NON DSR ITEM : Providing and fixing Chicken Wire Mesh at the Joint of RCC & Brickwork
883
156291
-
... More
NON DSR ITEM : Providing wooden cupboard in bed rooms and kitchen made of 19 mm prelam board shutters , 19 mm block board shelves /partitions including all necseaary hardware piano hinges, cupboard locks, handles etc with enamel painting complete as per the drawing
76
1076160
-
... More
NON DSR ITEM : Providing and fixing magic eye in Entrance Door
9
1593
-
... More
NON DSR ITEM : Providing and injecting chemical emulsion @7.5 litres/ sqm for pre constructional anti-termite treatment and creating a chemical barrier under and all-round the column pits, wall trenches, basement excavations, top surface of plinth, junction of wall and floor, along the external perimeter of buildings, expansion joints, surroundings of pipes and conduits, etc. complete (Plinth area of the building at ground floor only shall be measured) with chlorpyriphose/ Lindane E.C 20 % with 1 % concentration
3743
582560
-
... More
NON DSR ITEM : Providing and fixing at all levels Dura board HD100 or equivalent product in expansion joints between beams, columns etc complete as directed by engineer in charge. 50 mm thick
60
99120
-
... More
NON DSR ITEM : Grouting base plates, pockets, etc. at all levels with cement sand grout 1:1 mix include in finishing the surfaces neat.
1
15493
-
... More
NON DSR ITEM : Corner Flags for football ground
4
2360
-
... More
NON DSR ITEM : Back board for Basket ball ground
2
4720
-
... More
NON DSR ITEM : Net for Volley ball ground
1
1180
-
... More
NON DSR ITEM : Net for Badminton
1
1180
-
... More
DSR 2021 CODE NO:8.10.2 : Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth:Granite Stone of approved shade
8
35260
-
... More
DSR 2021 CODE NO:19.19.3.1 : Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality : H D – 20 , Circular shape 560 mm internal diameter
2
3717
-
... More
DSR 2021 CODE NO:18.54.1 : Providing and fixing PTMT bib cock of approved quality and colour.15mm nominal bore, 86 mm long, weighing not less than 88 gms
12
1639
-
... More
DSR 2021 CODE NO:17.1.1 : Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
28
201385
-
... More
DSR 2021 CODE NO:17.2.1 : Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :WC pan ISI marked white solid plastic seat and lid
27
186105
-
... More
DSR 2021 CODE NO:17.3.1 : Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern with fittings & C.I./M.S. brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid.
2
17270
-
... More
DSR 2021 CODE NO:17.7.4 : Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap
40
83580
-
... More
DSR 2021 CODE NO:17.7.9 : Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Surgeon type wash basin of size 660x460 mm with single 15 mm C.P. brass pillar taps with elbow operated levers ISI Marked
2
6542
-
... More
DSR 2021 CODE NO:17.7A : Providing and fixing wash basin with CI Brackets, 15 mm dia CP brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making the walls wherever requierd: a) white vitreous china wash basin size 550x400 mm with a 15 mm CP Brass Single Hole basin mixer
21
90368
-
... More
DSR 2021 CODE NO:17.8 : Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.
61
113835
-
... More
DSR 2021 CODE NO:17.10.1.3 : Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink with drain board: 510x1040 mm bowl depth 200 mm
9
70269
-
... More
DSR 2021 CODE NO:17.11.1 : Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required :Size 450x300x150 mm (Lab sink)
8
42526
-
... More
DSR 2021CODE NO:17.16A : Providing and fixing 8mm dia C.P./S.S. Jet with flexible tube upto 1meter long with S.S. Triangular plate to european type W.C. Of approved quality and make as approved by engineer in charge.
34
12661
-
... More
DSR 2021 CODE NO:17.22A : Providing and fixing CP Brass 32mm size bottle trap of approved quality & make and as per the direction of engineer in charge.
91
100332
-
... More
DSR 2021CODE NO:17.22B : Providing & Fixing CP Brass Single Lever Telephonic Wall Mixer of quality and make as approved by Engineer in Charge. (a) 15 mm Nominal Bore
21
159864
-
... More
DSR 2021 CODE NO:17.28.2.2 : Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Flexible pipe 40 mm dia
9
1168
-
... More
DSR 2021 CODE NO:17.31 : Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
63
110600
-
... More
DSR 2021 CODE NO:17.33 : Providing and fixing 600x120x5mm glass shelf with edges round of supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40mm long screws,rawl plugs etc., complete
21
24613
-
... More
DSR 2021 CODE NO:17.34.2 : Providing and fixing toilet paper holder- Vitreous china
34
19584
-
... More
DSR 2021 CODE NO:17.71 : Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms
61
11102
-
... More
DSR 2021 CODE NO:17.72 : Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms
61
15534
-
... More
DSR 2021 CODE NO:17.73.1 : Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour:450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms
21
14985
-
... More
DSR 2021 CODE NO:17.81 : Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge.
5
100149
-
... More
DSR 2021 CODE NO:17.80 : Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge.
28
243990
-
... More
DSR 2021 CODE NO:18.21.2.1 : Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length 15 mm nominal bore
9
953
-
... More
DSR 2021 CODE NO:18.22.2 : Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :150mm diameter
21
4966
-
... More
DSR 2021 CODE NO:18.49.1 :Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : a)15 mm nominal bore
62
33490
-
... More
DSR 2021 CODE NO:18.50.1 :Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.: 15 mm nominal bore
30
26687
-
... More
DSR 2021 CODE NO:18.52.1 :Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931: 15 mm nominal bore
11
8139
-
... More
DSR 2021 CODE NO:18.53.1 :Providing and fixing C.P.brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931:a) 15 mm nominal bore
146
90880
-
... More
DSR 2021 CODE NO:18.65 :Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.
52
6258
-
... More
NON DSR ITEM : Providing and Fixing 600 mm long Hand rail (Grab bar) for Handicap Toilets with Stainless Steel Screws on wooden cleats complete as per instructions of the engineer-in-charge (As per approved make or equivalent) .
34
52356
-
... More
DSR 2021 CODE NO:18.8.1 :Providing and Fixing Chlorinated Polyvinyl Chloride (CPVC) Pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with supports, clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-In-Charge.Concealed work including cutting chases and making good the walls etc. : 15 mm dia
759
416554
-
... More
DSR 2021 CODE NO:18.8.2 :Providing and Fixing Chlorinated Polyvinyl Chloride (CPVC) Pipes, having thermal stability for hot & cold water supply including all CPVC plain &brass threaded fittings including fixing the pipe with supports, clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-In-Charge.Concealed work including cutting chases and making good the walls etc. : 20 mm dia
100
63914
-
... More
DSR 2021 CODE NO:18.8.3 :Providing and Fixing Chlorinated Polyvinyl Chloride (CPVC) Pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with supports, clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-In-Charge.Concealed work including cutting chases and making good the walls etc. :25 mm dia
297
231315
-
... More
DSR 2021 CODE NO:18.8.4 :Providing and Fixing Chlorinated Polyvinyl Chloride (CPVC) Pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with supports, clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-In-Charge.Concealed work including cutting chases and making good the walls etc. : 32 mm di
120
106404
-
... More
DSR 2021 CODE NO:18.7.2 :Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.-Internal work - Exposed on wall and terrace- 20 mm nominal outer dia Pipes
33
13346
-
... More
DSR 2021 CODE NO:18.7.3 :Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.-Internal work - Exposed on wall and terrace- 25 mm nominal outer dia Pipes
757
384752
-
... More
DSR 2021 CODE NO:18.7.4 :Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.-Internal work - Exposed on wall and terrace- 32 mm nominal outer dia Pipes
616
383897
-
... More
DSR 2021 CODE NO:18.7.5 :Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.-Internal work - Exposed on wall and terrace- 40 mm nominal outer dia Pipes
528
442955
-
... More
DSR 2021 CODE NO:18.7.6 :Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.-Internal work - Exposed on wall and terrace- 50 mm nominal outer dia Pipes
429
494739
-
... More
DSR 2021 CODE NO:18.16.1 :Providing and Fixing brass Stop Cock of Approved Quality :15 mm nominal bore
64
24192
-
... More
DSR 2021 CODE NO:18.17.1 :Providing and fixing gun metal gate valve with C.I. wheel of approved quality(screwed end ) :25 mm nominal bore
87
57618
-
... More
DSR 2021 CODE NO:18.17.1A :Providing and fixing gun metal gate valve with C.I. wheel of approved quality(screwed end ) : 20 mm nominal bore
51
29296
-
... More
DSR 2021 CODE NO:18.17.2 :Providing and fixing gun metal gate valve with C.I. wheel of approved quality(screwed end ) : 32 mm nominal bore.
63
46233
-
... More
DSR 2021 CODE NO:18.17.3 :Providing and fixing gun metal gate valve with C.I. wheel of approved quality(screwed end ) :40 mm nominal bore
21
18478
-
... More
DSR 2021 CODE NO:18.17.4 :Providing and fixing gun metal gate valve with C.I. wheel of approved quality(screwed end ) :50 mm nominal bore
21
22944
-
... More
DSR 2021 CODE NO:18.17.5 :Providing and fixing gun metal gate valve with C.I. wheel of approved quality(screwed end ) :65 mm nominal bore
5
9272
-
... More
DSR 2021 CODE NO:18.17.6 :Providing and fixing gun metal gate valve with C.I. wheel of approved quality(screwed end ) :80 mm nominal bore
6
16627
-
... More
DSR 2021 CODE NO:18.18.1 :Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :15 mm nominal bore
2
867
-
... More
DSR 2021 CODE NO:18.18.2 :Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :20 mm nominal bore
24
11866
-
... More
DSR 2021 CODE NO:18.18.3 :Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :25 mm nominal bore
6
2979
-
... More
DSR 2021 CODE NO:18.19.1.1 :Providing and fixing gun metal non-return valve of approved quality (screwed end ) : Horizontal - 25 mm nominal bore
1
630
-
... More
DSR 2021 CODE NO:18.19.2.1 :Providing and fixing gun metal non-return valve of approved quality (screwed end ) : Horizontal - 32 mm nominal bore
1
842
-
... More
DSR 2021 CODE NO:18.19.3.1 :Providing and fixing gun metal non-return valve of approved quality (screwed end ) : Horizontal - 40 mm nominal bore
1
1013
-
... More
DSR 2021 CODE NO:18.19.4.1 :Providing and fixing gun metal non-return valve of approved quality (screwed end ) : Horizontal - 50 mm nominal bore
20
29201
-
... More
DSR 2021 CODE NO:18.19.5.1 :Providing and fixing gun metal non-return valve of approved quality (screwed end ) : Horizontal - 65 mm nominal bore
4
10419
-
... More
DSR 2021 CODE NO:18.19.6.1 :Providing and fixing gun metal non-return valve of approved quality (screwed end ) : Horizontal - 80 mm nominal bore
1
3899
-
... More
DSR 2021 CODE NO:18.48 : Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
17000
205190
-
... More
NON DSR ITEM : Supplying, installing, testing and commissioning of Solar water heating system at 60o/70oC consisting of solar Flat Plate collectors (Cu-Cu) with ultrasonic welded fins including structural supporting frames, Heat Exchanger, Stainless steel-304 hot water storage tank of 3mm thickness (minimum) of required capacity with installation over MS/ Civil supports, isolation valves, GI piping, insulation with PUF with nitrile and any other necessary works required to provide satisfactory functioning complete as per technical specificationss. (The contractor should make the schematic diagram and get it approved from Architects/ Consutants before installing) : 250 LPD
5
590000
-
... More
NON DSR ITEM : Supply of Wall hanging drinking water fountain with bottle filler facility, made by stainless steel. With cooling capacity 8GPH,ADA Compliant, size 472 mm Depth X 447mm width, flexible bubbler guard , operated between 50 to 120 PSI, Chiller unit Suitable to R134a Refrigerant, Adjustable thermostat control, suitable for 220- 230v/50-60 hz A/C.
2
58008
-
... More
DSR 2021 CODE NO:12.44 : Providing and Fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less then 440 grams.
70
4171
-
... More
DSR 2021 CODE NO:17.60.1.2 : Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 100 mm outlet : Sand Cast Iron S&S as per IS: 1729
248
433003
-
... More
DSR 2021 CODE NO:17.60.2.2 : Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :100 mm inlet and 75 mm outlet: Sand Cast Iron S&S as per IS- 1729
1
1612
-
... More
DSR 2021 CODE NO:18.58.1.2 : Providing and fixing PTMT grating of approved quality and colour : Circular type 125 mm nominal dia with 25 mm waste hole
314
17675
-
... More
NON DSR ITEM : Supplying and fixing PVC pipes conforming to IS 4985 class III, 6 kg/sq.cm pressure for lines with all required specials such as plain bends, single junctions, elbows, crosses, unions, shoes, door bends, double junctions, vent cowls, etc. with or without door including cutting masonry or concrete floors, sunshades, etc and making the holes good after finishing the work. wherever necessary and jointing pipes with approved quality resin cement and fixing pipes with MS fixing clamps screwed on to wooden plugs embedded in masonry wherever required and painting the clamps with two coats of enamel paint over one coat primer. This includes testing of joints complete at all levels. for waste water lines -75mm or nearest outer dia.
395
97881
-
... More
NON DSR ITEM : Supplying and fixing PVC pipes conforming to IS 4985 class III, 6 kg/sq.cm pressure for lines with all required specials such as plain bends, single junctions, elbows, crosses, unions, shoes, door bends, double junctions, vent cowls, etc. with or without door including cutting masonry or concrete floors, sunshades, etc and making the holes good after finishing the work. wherever necessary and jointing pipes with approved quality resin cement and fixing pipes with MS fixing clamps screwed on to wooden plugs embedded in masonry wherever required and painting the clamps with two coats of enamel paint over one coat primer. This includes testing of joints complete at all levels. for waste water lines - 110mm or nearest outer dia.
1964
927008
-
... More
DSR 2021 CODE NO:16.1 : Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres.
1800
404190
-
... More
NON DSR ITEM : Providing and laying water bound macadam sub base (as per CPWD specification grade I to II materials) including spreading in uniform thickness, hand picking, rolling with 3 wheeled road / vibratory roller 8- 10 tonne in stages to proper grade and camber, applying and brooming requisite type of screenings / binding material to fill up interstices of coarse aggregate watering and compacting to the required density.
180
171811
-
... More
DSR 2021 CODE NO:16.30.1 : Providing and applying tack coat using hot straight run bitumen of grade VG - 10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications :On W.B.M. @ 0.75 Kg / sqm
1800
101214
-
... More
DSR 2021 CODE NO:16.30.2 : Providing and applying tack coat using hot straight run bitumen of grade VG - 10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications : On bituminous surface @ 0.50 Kg / sqm
1800
81954
-
... More
DSR 2021 CODE NO:16.25 : Surface dressing on new surface with paving bitumen of grade VG -10 of approved quality using 2.25 kg of bitumen per sqm with 1.65cum of stone chippings 13.2 mm nominal size per 100 sqm of road surface, including consolidation with road roller of 6 to 8 tonne capacity etc. complete:
1800
398934
-
... More
DSR 2021 CODE NO:16.32.1 : 2 cm premix carpet surfacing with 1.8 cum and 0.90 cum of stone chippings of 13.2 mm size and 11.2 mm size respectively per 100sqm and 52 kg and 56 kg of hot bitumen per cum of stone chippings of 13.2 mm and 11.2 mm size respectively, including a tack coat with hot straight run bitumen, including consolidation with road roller of 6 to 9 tonne capacity etc. complete (tack coat to be paid for separately):With paving Asphalt grade VG - 10 heated and then mixed with solvent at the rate of 70 grams per kg of asphalt
1800
423792
-
... More
DSR 2021 CODE NO:16.69 : Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
19
203599
-
... More
.DSR 2021 CODE NO:16.91.1 : Providing laying factory made chamfered edge Cement Concrete paver block In foot path, park & lawns driveway or light &traffic parking etc.of required strength,thicknees& size/ shape,made by table vibratory method using PU mould,laid in required colour & pattern over 50mm thick compacted bed of course sand,compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand,all complete as per manufacturer’s specifications &directionof Engineer in Charge : 60mm thick Cement concrete paver block of M-35 grade with approved colour,design& pattern.
1695
1966030
-
... More
NON DSR ITEM : Providing and fixing M.S. flat iron tree guard 60 cm dia and 2 m high, above ground consisting 4 nos 25 x 6 mm, 2.25 m long and 8 nos 25 x 3 mm 2 m long verticals M.S. flats, riveted to 3 nos 25 x 6 mm M.S. flat iron rings in two halves, fixing together at site with required six numbers of 8 mm dia and 30 mm long bolts, including painting two coats with synthetic enamel paint of approved brand and manufacture over a coat of primer. One nameplate of 1 mm thick M.S. sheet of size 250x100 mm shall be welded to the tree guard near the middle height and lettered CPWD / PWD/ any other approved name. The tree guard shall be suitably fixed to the ground by embedding four legs of tree guard in pits of suitable dia and to a depth of 25cm, refilling the pits with soil and ramming, complete in all respect as per satisfaction and direction of Officer-in-charge.
10
49165
-
... More
DSR 2021 CODE NO:2.10.1.1 : Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depths, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m in All kinds of soil -Pipes, cables etc, not exceeding 80 mm dia.
510
113985
-
... More
DSR 2021 CODE NO:2.10.1.2 : Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depths, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidatingeach deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed,within a lead of 50 m in All kinds of soil - Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia
510
186155
-
... More
DSR 2021 CODE NO:18.31.1.2: Providing fixing CI Sluice Valve (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately )-100 mm diameter Class II
5
27992
-
... More
DSR 2021 CODE NO:18.32.1: Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design :With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
4
8520
-
... More
DSR 2021 CODE NO:18.33.1: Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
4
50272
-
... More
DSR 2021 CODE NO:18.34.1: Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
1
21867
-
... More
DSR 2021 CODE NO:18.41.2: Providing and filling sand of grading zone V or coarser grade alround the GI pipes in external work 20 mm dia nominal bore
10
1988
-
... More
DSR 2021 CODE NO:18.41.3: Providing and filling sand of grading zone V or coarser grade alround the GI pipes in external work 25 mm dia nominal bore
10
2041
-
... More
DSR 2021 CODE NO:18.41.4: Providing and filling sand of grading zone V or coarser grade alround the GI pipes in external work 32 mm dia nominal bore
10
2094
-
... More
DSR 2021 CODE NO:18.41.5: Providing and filling sand of grading zone V or coarser grade alround the GI pipes in external work 40 mm dia nominal bore
10
2121
-
... More
DSR 2021 CODE NO:18.41.6: Providing and filling sand of grading zone V or coarser grade alround the GI pipes in external work 50 mm dia nominal bore
10
2200
-
... More
DSR 2021 CODE NO:18.41.7: Providing and filling sand of grading zone V or coarser grade alround the GI pipes in external work 65 mm dia nominal bore
10
3473
-
... More
DSR 2021 CODE NO:18.41.8: Providing and filling sand of grading zone V or coarser grade alround the GI pipes in external work 80 mm dia nominal bore
500
178960
-
... More
NON DSR ITEM: Providing & Fixing Water Meter for Individual Dwelling units
9
10620
-
... More
NON DSR ITEM: Providing and Fixinng External Water line of 3 layers PPR,UV stabilized & anti-microbial fusion welded pipe, having thermal stability for cold water supply, including all PP-R Plain & brass threaded polypropylene random fittings (Pipes of SFMC,Blue opal, Supreme or Reliance) : External works -20 mm dia
10
2006
-
... More
NON DSR ITEM: Providing and Fixinng External Water line of 3 layers PPR,UV stabilized & anti-microbial fusion welded pipe, having thermal stability for cold water supply, including all PP-R Plain & brass threaded polypropylene random fittings (Pipes of SFMC,Blue opal, Supreme or Reliance) : External works - 25 mm dia
10
2360
-
... More
NON DSR ITEM: Providing and Fixinng External Water line of 3 layers PPR,UV stabilized & anti-microbial fusion welded pipe, having thermal stability for cold water supply, including all PP-R Plain & brass threaded polypropylene random fittings (Pipes of SFMC,Blue opal, Supreme or Reliance) : External works - 32 mm dia
10
2714
-
... More
NON DSR ITEM: Providing and Fixinng External Water line of 3 layers PPR,UV stabilized & anti-microbial fusion welded pipe, having thermal stability for cold water supply, including all PP-R Plain & brass threaded polypropylene random fittings (Pipes of SFMC,Blue opal, Supreme or Reliance) : External works - 40 mm dia
10
3304
-
... More
NON DSR ITEM: Providing and Fixinng External Water line of 3 layers PPR,UV stabilized & anti-microbial fusion welded pipe, having thermal stability for cold water supply, including all PP-R Plain & brass threaded polypropylene random fittings (Pipes of SFMC,Blue opal, Supreme or Reliance) : External works - 50 mm dia
10
3776
-
... More
NON DSR ITEM: Providing and Fixinng External Water line of 3 layers PPR,UV stabilized & anti-microbial fusion welded pipe, having thermal stability for cold water supply, including all PP-R Plain & brass threaded polypropylene random fittings (Pipes of SFMC,Blue opal, Supreme or Reliance) : External works - 65 mm dia
10
5074
-
... More
NON DSR ITEM: : Providing and Fixinng External Water line of 3 layers PPR,UV stabilized & anti-microbial fusion welded pipe, having thermal stability for cold water supply, including all PP-R Plain & brass threaded polypropylene random fittings (Pipes of SFMC,Blue opal, Supreme or Reliance) : External works - 80 mm dia
500
295000
-
... More
DSR 2021 CODE NO:2.10.1.3: Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depths, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :All kinds of soil- Pipes, cables etc. Exceeding 300 mm dia but not exceeding 600 mm
20
11398
-
... More
DSR 2021 CODE NO:19.2.2: Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W./RCC pipes including bed concrete as per standard design: 150 mm diaS.W.pipe
5
6812
-
... More
DSR 2021 CODE NO:19.2.3: Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W./RCC pipes including bed concrete as per standard design:200 mm diaS.W.pipe
5
7941
-
... More
DSR 2021 CODE NO:19.2.4: Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W./RCC pipes including bed concrete as per standard design: 250 mm diaS.W.pipe
5
9183
-
... More
DSR 2021 CODE NO:18.27.3: Providing and laying S&S centrifugally cast (spun) iron pipes (Class LA) conforming to IS – 1536 : 150 mm dia
5
11350
-
... More
DSR 2021 CODE NO:18.27.4: Providing and laying S&S centrifugally cast (spun) iron pipes (Class LA) conforming to IS - 1536: 200 mm dia
5
19181
-
... More
DSR 2021 CODE NO:19.4.1 : Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame o f 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 100x100 mm size P type with common burnt clay F.P.S. (non modular) bricks of class designation 7.5
40
122094
-
... More
DSR 2021 CODE NO:19.7.1.1 :Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
10
145394
-
... More
DSR 2021 CODE NO:19.7.2.1: Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design: Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) : With common burnt clay F.P.S. (non-modular ) bricks of class designation 7.5
26
789423
-
... More
DSR 2021 CODE NO:19.8.1.1 : Extra for depth for manholes :Size 90x80 cm With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
5
50555
-
... More
DSR 2021 CODE NO:19.8.2.1: Extra for depth for manholes : Size 120x90 cm With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
15
181836
-
... More
DSR 2021 CODE NO:19.9.1.1: Constructing brick masonry circular type manhole 0.91 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 ( 1 cement : 4 Coarse sand ), in side cement plaster 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished withh a floating coat of neat cement, foundation concrete 1:3:6 mix ( 1 Cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) and making necessary channel in cement concrete 1:2:4 ( 1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished withh a floating coat of neat cement all complete as per standard design: 0.91 m deep withh S.F.R.C . cover and frame ( heavy duty, HD-20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 Kg. fixed in cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering shuttering all complete. (Excavation , foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
5
73937
-
... More
DSR 2021 CODE NO:19.10.1: Extra depth for circular type manhole 0.91m internal dia (at bottom) beyond 0.91 m to 1.67 m With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
3
26076
-
... More
DSR 2021 CODE NO:19.11.1.1: Constructing brick masonry circular manhole 1.22 m internal dia at bottom and 0.56 m dia at top with 75 class designation F.P.S. brick in cement mortar 1:4 ( 1 Cement :4 Coarse sand inside cement plaster 12 mm thick with cement mortar 1:3 ( 1 cement : 3 Coarse sand) finished with a floating coat of neat cement foundation concrete 1:3:6 ( 1 cement : 3 coarse sand ; 6 graded stone aggregate 40 mm nominal size) and making necessary channel in cement concrete 1:2:4 ( 1 cement ; 2 coarse sand : 4 graded stone aggregate 20 mm nominal size finished with a floating coat of neat cement all complete as per standard design : 1.68m deep with SFRC Cover and frame ( Heavy duty HD-20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 Kg . fixed in cement concrete 1:2:4 ( 1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering shuttering all complete. ( Excavation , foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
28553
-
... More
DSR 2021 CODE NO:19.12.1 : Extra depth for circular type manhole 1.22 m internal dia (at bottom) beyond 1.68 m to 2.29 m : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
11281
-
... More
DSR 2021 CODE NO:19.13.1.1: Constructing brick masonry circular manhole 1.52 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand) inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design : 2.30 m deep with SFRC Cover and frame (heavy duty HD- 20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
61199
-
... More
DSR 2021 CODE NO:19.14.1: Extra depth for circular type manhole 1.52 m internal dia (at bottom) beyond 2.30 m : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
26253
-
... More
DSR 2021 CODE NO:19.27.1: Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
6953
-
... More
DSR 2021 CODE NO:19.28.1: Constructing brick masonry road gully chamber 45x45x77.5 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand ) with precast R.C.C. vertical grating complete as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
7785
-
... More
DSR 2021 CODE NO:19.29.1: Constructing brick masonry road gully chamber 110x50x77.5 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame and vertical grating complete as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
13183
-
... More
DSR 2021 CODE NO:19.30.1.1: Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 Fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 455x610 mm and 45 cm deep for single pipe line : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
8000
-
... More
DSR 2021 CODE NO:19.30.2.1: Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 Fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 500x700 mm and 45 cm deep for pipe line with one or two inlets : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
9091
-
... More
DSR 2021 CODE NO:19.30.3.1: Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 Fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 600x 850 mm and 45 cm deep for pipe line with three or more inlets With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
10715
-
... More
DSR 2021 CODE NO:19.31.1.1: Extra for depth beyond 45 cm of brick masonry chamber :For 455x610 mm size With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
7017
-
... More
DSR 2021 CODE NO:19.31.2.1: Extra for depth beyond 45 cm of brick masonry chamber : For 500x700 mm size With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
7660
-
... More
DSR 2021 CODE NO:19.31.3.1: Extra for depth beyond 45 cm of brick masonry chamber : For 600x850 mm size With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
8928
-
... More
NON DSR ITEM: Supplying and fixing PVC pipes in Trenches conforming to IS 4985 class III, 6 kg/sq.cm pressure for External Sewerage lines including testing of joints complete at all levels. for waste water lines (Earth work for Trench is Payable Separately): 160 dia
100
47200
-
... More
NON DSR ITEM: Supplying and fixing PVC pipes in Trenches conforming to IS 4985 class III, 6 kg/sq.cm pressure for External Sewerage lines including testing of joints complete at all levels. for waste water lines (Earth work for Trench is Payable separately): 250 dia
510
398391
-
... More
NON DSR ITEM: Supplying and fixing PVC pipes in Trenches conforming to IS 4985 class III, 6 kg/sq.cm pressure for External Sewerage lines including testing of joints complete at all levels. for waste water lines (Earth work for Trench is Payable Separately): 300 dia
50
59000
-
... More
DSR 2021 CODE NO:23.1.1.3: Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, up to 90 metre depth below ground level in All Types of Soil - 400mm dia
130
134048
-
... More
DSR 2021 CODE NO:23.10.3: Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/ plain ended casing pipes of required dia, conforming to IS: 4270, of reputed & approved make, including painted with outside surface with two coats of anticorrosive paint of approved brand and manufacture, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer-in-charge : 200 mm nominal size dia having minimum wall thickness 5.40 mm
90
233123
-
... More
DSR 2021 CODE NO:23.11.3: Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 plain slotted (having slot of size 1.6/3.2 mm) mild steel threaded and socketed / plain bevel ended pipe (type A) of required dia, conforming to IS: 8110, of reputed and approved make, having wall thickness not less than 5.40 mm, including painted with outside surface with two coats of anticorrosive bitumestic paint of approved brand and manufacture, including hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer -in-charge : 200 mm nominal size dia
90
245747
-
... More
DSR 2021 CODE NO:23.5: Supplying, filling, spreading &leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
16
25922
-
... More
DSR 2021CODE NO:23.6: Supplying, filling, spreading &leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
36
58625
-
... More
DSR 2021 CODE NO:23.7: Supplying, filling, spreading &leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge.
36
58625
-
... More
DSR 2021 CODE NO:23.8: Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.
54
99375
-
... More
DSR 2021 CODE NO:23.12: Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge:
100
114056
-
... More
DSR 2021 CODE NO:23.13.3: Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 200 mm dia
1
349
-
... More
DSR 2021 CODE NO:23.14.3: Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete: 200 mm clamp.
1
2272
-
... More
DSR 2021 CODE NO:23.15.3: Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I). 200 mm dia
1
383
-
... More
NON DSR ITEMS: Supply Installing Testing &Comissioning of 10HP Submerssible pump with required cabling and starter Panel
1
64900
-
... More
DSR 2021 CODE NO:19.32.1: Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design: With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
2
69739
-
... More
NON DSR ITEMS :Construction of RCC Septic Tank of Size 5.0mx 1.8 m x 2m internal size with inlet and outlet for pie, manhole cover, vent pipe, rungs, wall thickness of 175 mm, thickness of top slab 130 mm, thickness of base slab 150 mm and thickness of foundation of wall 300 mm including base PCC 1:4:8 of 100 mm thick. including excavation, shuttering, RCC, Reinforcement.: With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
2
236000
-
... More
NON DSR ITEMS :Preparing chalk board of size 3mx1.4 m size with under coat of 12 mm cement plaster of 1 cement, 2 sand and 1 charcoal powder. Finishing coat of 1 cement and 1 charcoal (3 mm thick)
Painting with Dissolve 1/2 kg of shellac in 5 litres of methylated spirit and add 1/2 kg of ivory black, 75 gms of finest flour emery and 1/4 kg of ultramarine blue. Mx and put in stoppered bottle.
30
106200
-
... More
NON DSR ITEMS: Providing and fixing pin up board of size 1.4 mx 1.4 m of 12 mm thick fibre board covered with fabric as approved and with wooden beading
25
59000
-
... More
DSR 2021 CODE NO:23.3.3: Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC (Slotted / Plain pipe) medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge : 200 mm nominal size dia
40
48334
-
... More
DSR 2021 CODE NO:19.16: Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS:1786, having minimum cross section as 23 mmx25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture’s permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.
35
21209
-
... More
DSR 2021 CODE NO:19.19.4.1: Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality : EHD-35,Circular shape 560 mm internal dia
25
58539
-
... More
NON DSR ITEMS: Construction of brick masonry desilting chamber of size 200x100x60cm (effective depth) before rainy well with 75 class designation bricks in cement mortar 1:4 (1 cement : 4 coarse sand) , foundation concrete 1:4:8 mix (1 cement : 4 coarse sand; 8 graded stone aggregate 40mm nominal size), inside and outside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement inside and rough plaster on outside, including fixing of grating , neatly finished complete in all respects including neccessary excavation, refilling and disposal of surplus earth, complete as per attached Sketch.
1
59714
-
... More
NON DSR ITEMS: Providing and fixing fire extinguisher of carbon dioxide type consisting of brand new high pressure steel cylinder bearing IS: 7285 mark and having the approval of controller of explosives Nagpur, wheel type valve bearing IS:3224 mark internal discharge tube, 1 meter long high pressure discharge hose, non conducting horn, suspension bracket, fully charged bearing IS: making fixed to wall as directed conforming IS : 15683:2006 4.5kg capacity cylinder
4
74340
-
... More
NON DSR ITEMS: Providing and fixing ISI marked portable fire extinguishers of the following type. Dry Chemical Powder ABC type of 6 Kg as per IS:15683
8
66080
-
... More
NON DSR ITEMS: Supply, Installation, testing & commissioning of Horizontal monobloc pumping set with C.I. body and bronze impeller, shaft of carbon steel and C.I. Base & head, mechanical seal, connected to a TEFC induction motor suitable for 400/440 volts, 3 phase 50 cycles A.C. supply with 150 mm dia pressure gauge with gunmetal isolation cock, vibration eliminating pads as required, M.S fabricated base plate bolted to cement concrete foundations complete.
Domestic Water Supply pumps : Capacity/Flow Rate - 300 LPM
Head - 25 m
Approx H.P. - As per manufacture recommendation Location - Pump Room at UGT
( 2nos(1W+1S)
2
77880
-
... More
NON DSR ITEMS: Supply, Installation, testing commissioning of G.I. Suction / delivery header & Inlet/Outlet Pipe heavy duty (class 'C') including all flanged connections as per drawing / site requirement, support from wall floor and ceiling etc. including dead end flanged connection for pump including all fittings & supports, painting, civil breakage and making good the same: 50 mm dia
5
3494
-
... More
NON DSR ITEMS: Supply, Installation, testing commissioning of G.I. Suction / delivery header & Inlet/Outlet Pipe heavy duty (class 'C') including all flanged connections as per drawing / site requirement, support from wall floor and ceiling etc. including dead end flanged connection for pump including all fittings & supports, painting, civil breakage and making good the same. 65 mm dia
10
10484
-
... More
NON DSR ITEMS: Supply, Installation, testing commissioning of G.I. Suction / delivery header & Inlet/Outlet Pipe heavy duty (class 'C') including all flanged connections as per drawing / site requirement, support from wall floor and ceiling etc. including dead end flanged connection for pump including all fittings & supports, painting, civil breakage and making good the same. 80 mm dia
10
13280
-
... More
NON DSR ITEMS: Supply, installation, testing & commissioning of CI slim seal butterfly valves Class (PN 10) complete with 2 Nos. matching flanges rubber insertion, nuts, bolts and washer etc. of following sizes :-50 mm dia
3
7800
-
... More
NON DSR ITEMS: Supply, installation, testing & commissioning of CI slim seal butterfly valves Class (PN 10) complete with 2 Nos. matching flanges rubber insertion, nuts, bolts and washer etc. of following sizes :-65 mm dia
3
8362
-
... More
NON DSR ITEMS: Supply, installation, testing & commissioning of CI slim seal butterfly valves Class (PN 10) complete with 2 Nos. matching flanges rubber insertion, nuts, bolts and washer etc. of following sizes :-80 mm dia
3
8979
-
... More
NON DSR ITEMS: Supply, installation, testing & commissioning of CI dual plate type non-return valve (PN 10) complete with 2 Nos. matching flanges, rubber insertion, nuts, bolts and washer etc. of following sizes with locking arrangement. 50 mm dia
2
8147
-
... More
NON DSR ITEMS: Supply, installation, testing & commissioning of CI dual plate type non-return valve (PN 10) complete with 2 Nos. matching flanges, rubber insertion, nuts, bolts and washer etc. of following sizes with locking arrangement. 65 mm dia
2
10154
-
... More
NON DSR ITEMS: Supply, installation, testing & commissioning of CI dual plate type non-return valve (PN 10) complete with 2 Nos. matching flanges, rubber insertion, nuts, bolts and washer etc. of following sizes with locking arrangement. 80 mm dia
1
6008
-
... More
NON DSR ITEMS: Providing and fixing C.I. Basket strainer/Y type suction strainer with gunmetal or brass internal parts installed outside water: 50 mm dia
2
4932
-
... More
NON DSR ITEMS: Providing and fixing C.I. Basket strainer/Y type suction strainer with gunmetal or brass internal parts installed outside water: 65 mm dia
2
8401
-
... More
NON DSR ITEMS: Providing and fixing C.I. Basket strainer/Y type suction strainer with gunmetal or brass internal parts installed outside water: 80 mm dia
2
10241
-
... More
NON DSR ITEMS: Supply, installation, testing and commissioning of panels suitable for 415 V, 3 phase, 4 wires, 50 Hz power distribution system. The panel shall be free standing floor/wall mounting, sheet metal enclosed flush front dust and vermin proof with Aluminium busbars separate earth bus bars to be provided throughout the length of the panel. The incoming and outgoing feeder shall be accommodated in a modular multitier arrangement. The painting shall done as per relevant IS codes/as specified in the specifications. Adequate size cable alley shall be provided for each cable bending and termination. Bus bars shall be provided with heat shrinkable colour coded PVC sleeves.The panels shall be suitable for cable entry from top/Bottom. The minimum fault rupturing of all incoming and outgoing switches/breakers shall be as specified. The panels shall be fabricated after the approval of fabrication drawings.Domestic Pumps Panel : Location: Pump Room Comprising of the following: Incoming: One (1) No. 63A, 25 KA, TPN MCCB with adjustable thermo magnetic release as incomer. One (1) No. (0-500V) digital type voltmeter. One (1) No. (0-63A) digital type Ammeter with suitable C.T.’s for metering.One (1) No. earth leakage relay with multiple trip setting with CBCT.One (1) set of R, Y, B phase indication lamps and MCCB ON/OFF indication Lamps.Busbars100 A TPN Aluminium busbar insulated with heat shrinkable sleeves and shall be color coded.Outgoings:Three (3) Nos. 32A TP MCCB, 25 KA.f fOne (1) Nos., 16amp TP MCB , 25KAStarter:Starter complete with Auto /Manual selector switch, start / stop Push Button,O/L Relay with Single phasing preventer feature, ON-OFF and Trip Indicating lamps,AC3 duty contactors Auxellarycontacts for Building Automation System, interlocking etc suitable for the motor H.P. as specified below :-2 No. DOL starter suitable for 7.5 HP motorsWater Level Controller with level switches :Water level controller shall be provided for each starter with sufficient nos. of low/high level switches for the auto operation of the pumps. Cost for wiring from level switches to the starter panel shall be included in this item and shall not be paid seperatelyWater level controller shall be provided for each starter with sufficient nos. of low/high level switches for the auto operation of the pumps. Cost for wiring from level switches to the starter shall be included in this item and shall not be paid separateWater supply pumps Panel as described above
1
48929
-
... More
NON DSR ITEM : 11 KV DOUBLE POLE STRUCTURE
Supply, erection & commissioning of 2-pole structure as per specifications 13ES901/14 and Data sheet 8153-13-DA-90101.for tapping of 11 KV power supply for substation. The 2-pole structure shall comprise of:- (a) Steel tubular pole 12 mtr long (260 kg) in concrete (1:3:6) foundation including excavation pole foundation and refilling etc as per latest IS:2713-2 Nos (b) Steel section, channels angles, flats, clamps, GI nuts, bolts and required hardware etc. of different sizes for cross arms, bracings, supports for pole, etc . Fencing Around DP Structure Shall be provided. (c) 11KV class disc / pin / support insulator complete with clamps and fixing hard wares etc. complete as required-lot (d)11 KV station class thyrite type lightning surge arrestors complete with mounting arrangement(on all phases) on the incoming overhead line-1Set (3 Nos.-1 per phase) (e) 630A ,18.4kA GOAB switch with drop out-lock out (DOLO) fuse, gang operated device with pad locking arrangement (operating rod to be supported properly), complete with operating handle and locking arrangement. 1-Set (f) ACSR conductor for extending connection from line to cable end, complete as required. Heat-shrinkable insulating tape for protection of high voltage lines shall be used on overhead lines used for tapping of power-Lot (g) Connection of G.O switch, 2 pole structure, earth wire of overhead network etc.to the earthing grid including earth electrode using 50x6 mm G,I strip, complete as described Double pole structure as per details above and specifications
1
295000
-
... More
NON DSR ITEM : HT METERING PANEL (11KV) :Supplying, installing, testing and commissioning of 11KV,HT Metering panels totally enclosed indoor type metal clad floor mounted dust and vermin proof suitable for metering on 11KV, 3 Phase, 50 Hz earthed system with following 1. Three 11 KV 15/5 Amp 15VA, resin cast type current transformers for metering purposes, Accuracy Class of CT shall be as per Electric Supply authority Requirement 2. One No. 11KV/110 Volts, three phase, resin cast type potential transformer connected star/star on HV/LV sides for metering purposes 3. Space for installation of tri-vector meter for 11KV HT metering 4. One strip heater to prevent absorption of moisture. 5. Two No. .cable end box suitable for indoor termination of incoming and outgoing 11KV XLPE cables of sizes 240 Sq.mm/3 core. Supply of 11KV HT metering Panel complete as required as per above details and requirements/approval 6. Installation, testing & commissioning of 11KV HT metering panel complete as required 7.Bidirectional net metering for grid tied solar power system (11 KV HT metering panel shall be as per the requirement and approval of State Electricity Supply Authority ) (PANEL)
1
221250
-
... More
NON DSR ITEM : HT SINGLE VCB PANEL SITC of 11kV, 630 A Vacuum circuit breaker Panel (incomer cum Outgoing Transformer feeder )of (350 MVA) 18.4 KA rupturing capacity totally enclosed, air insulated metal clad housing, floor mounting, vertical isolation, vermin proof. fully interlocked horizontal drawout type having double isolation features and control devices as per specification 13ES903/14 and Data sheet 8153-13-DA-90301
1
737500
-
... More
NON DSR ITEM : 200 KVA TRANSFORMER (DRY TYPE TRANSFORMER) Design, manufacturing, testing at works and SITC of high efficiency 200 KVA copper wound 11 / 0.433 KV; 50 c/s; delta/star connected (DYn11) Epoxy Cast Resin Dry Type AN cooled indoor Transformer with min. insulation class 'F' having 4.0 % impedance designed for 50 deg.C. ambient temperature, off load tap changer on HV side (-7.5 % to +7.5 % in steps of 2.5 %), top entry cable end box on HV side for upto 3c x 240 sq.mm 11 KV (E) XLPE insulated aluminium conductor cable & flange on LV side suitable for upto 1 nos. 3.5c x 300 sq.mm 1.1 KV XLPEinsulated armouredaluminium conductor cable or air insulated bus duct, neutral CT of suitable ratio and complete with IP23 enclosure, fittings & accessories as per specifications(13ES904/14) and complete as required as per the data sheet attached(8153-13-DA-90401)
1
826000
-
... More
NON DSR ITEM : Main L.T.PANEL Supply, installation, testing and commissioning of front operated, front / back access, cubicle type, indoor duty, floor mounted, totally enclosed dust and vermin proof switchboards / panels with minimum Ingress protection classification of IP 44, fabricated from 2 mm thick CRCA sheets with dip coat priming and epoxy powder coated finish. The panel must be suitable for 415 volts 3 phase, 4 wire, 50 Hz, system , must be able to withstand symmetrical fault level of 50 KA for 1 sec at 415 V and must include all interconnections, earthing and bonding requirements etc. The panel must conform to standards specification 13ES906/14 as required and as given below.
The Switchboard shall be provided with detachable gland plates for entry of cables from the bottom as required.All live accessible parts shall be shrouded and all equipment shall be finger touch proof. The busbars shall be insulated with heat shrinkable sleeves. SMC / DMC shrouds and busbar supports suitably spaced shall be used. Hinged doors with padlocking facility shall be provided on all outgoing feeders with switch handles lockable in OFF position. The panel shall have aluminiumbusbars with bar type feeder connections, spacers etc. with full sized neutral.Earthing all components, frame etc. to a common internal earth bar of size 25 x 10mm Cu.Panel / Switchboard board design shall be compact and components / accessories of compact sizes shall be used to economise the room space available. Employer reserve the right to seek compact items in place of larger ones.
200KVA Transformer Incomer (1 No.) and shall be equipped with: 1 no. 400 Amp Rating Four pole 50 KA MCCB for 200 KVA Transformer incoming shall be provided with Earth Fault release and Standby Low Set Earth fault relay with 60/5A 5P10 CT at neutral Earthing Conductor and one set of ON/OFF indication lamps with protection Fuse and 1 No. Numerical multifunction meter measuring current Voltage, KW,KWH, KVA,KVAR, Frequency & Power Factor etc. of Suitable Range and CT 300/5A CL1+CT for APFCR.
Bus Bars: Electrolytic high conductivity FP aluminium conductor bus-bars rated 400 Amps, suitable to withstand symmetrical fault level of 50 KA for 1 second at 415 volts and with necessary heat shrinkable sleeving.
Outgoing: 4Nos. 200 A TPN MCCB 50 KA with thermal-magnetic release for O/C & SC protection, 3 Nos. CT 200/5 A class 1.0, 0-200 A Ammeter with built in ASS, Indication for Phase, CB 'ON', 'OFF', 'TRIP' complete as required.2Nos. 63 A TPN MCCB 50 KA with thermal-magnetic release for O/C & SC protection, 3 Nos. 40 A TPN MCCB 50KA with thermal-magnetic release for O/C & SC protection,
Main LT Panel complete as above and required:
1
855500
-
... More
NON DSR ITEM : Supply, Installation, testing and commissioning of 85KVAR Capacitor bank with automatic switching ON and OFF control panel with microprocessor based automatic power factor correction panel of min.8stages suitable for 415 volts,3 phase 50 HZ supply system as per specification attached. Refer Data sheet 8138-13-DA-93201
1
584100
-
... More
NON DSR ITEM: Supply, Installation, Testing and Commissioning of 24V DC supply unit complete with 65 AH maintenance free battery cells(VRLA) (for HT panel/LT Panel), trickle / boost Battery Charger & DC DB. Battery charger shall be solid state, full wave fully controlled bridge, input suitable for 3ph 415V AC supply conforming to degree of protection IP-42, sheet steel 2 mm thick, with automatic voltage regulation current limiting circuitry, auto cut facility, smooth filter circuit switches, ammeter & voltmeter on AC & DC side, RYB indicating lamps (LED type) on AC side, complete in all respect with float and boost charging, switchgear on incoming & outgoing, earthing, Painting etc. as required.
1
177000
-
... More
NON DSR ITEM :H.T. CABLE Supply & laying of following size of 11 KV XLPE insulated aluminium conductor earthed and armoured cable conforming to IS 7098 complete as required. 3 Core, 240 sq.mm
50
201750
-
... More
NON DSR ITEM :Supply & making Indoor/Outdoor cable and termination with heat shrinkable cable termination kit with all accessories including crimped cable lugs suitable for the following sizes of three core XLPE aluminium conductor cable of 11KV grade as required. 3 Core 240 sq.mm
4
78507
-
... More
NON DSR ITEM : Supplying, receiving, storing, laying, effecting proper connections, testing and commissioning of the following sizes of 1.1 KV grade PVC insulated copper conductor armoured stranded control cable complete as required and as per specifications. 3 core, 2.5 sq.mm Cu. Cable
30
9912
-
... More
NON DSR ITEM : Supply and Laying of following sizes of 1.1 KV grade single core/multicore aluminium conductor XLPE insulated and PVC sheathed armoured cable conforming to IS 1554 (Part-I) 1988.direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required or in Cable Tray on wall/Ceiling.3.5 Core, 240 sq.mm. XLPE Aluminium Cable
500
1632530
-
... More
NON DSR ITEM : Supply and Laying of following sizes of 1.1 KV grade single core/multicore aluminium conductor XLPE insulated and PVC sheathed armoured cable conforming to IS 1554 (Part-I) 1988.direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required or in Cable Tray on wall/Ceiling. 3.5 Core, 35 Sq.mm XLPE Aluminium Cable
300
181956
-
... More
NON DSR ITEM : Supply and Laying of following sizes of 1.1 KV grade single core/multicore aluminium conductor XLPE insulated and PVC sheathed armoured cable conforming to IS 1554 (Part-I) 1988.direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required or in Cable Tray on wall/Ceiling.4X16 sq.mm. XLPE Aluminium Cable
300
120360
-
... More
NON DSR ITEM : Supply and Laying of following sizes of 1.1 KV grade single core/multicore aluminium conductor XLPE insulated and PVC sheathed armoured cable conforming to IS 1554 (Part-I) 1988.direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required or in Cable Tray on wall/Ceiling. 4X10 sq.mm. XLPE Aluminium Cable
120
40780
-
... More
NON DSR ITEM : Supply and Laying of following sizes of 1.1 KV grade single core/multicore aluminium conductor XLPE insulated and PVC sheathed armoured cable conforming to IS 1554 (Part-I) 1988.direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required or in Cable Tray on wall/Ceiling. 3X6sq.mm. XLPE Aluminium Cable
1000
250160
-
... More
DSR 2022(E&M) CODE NO:9.1.29: Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3½ X 240 sq. mm (62mm)
6
5402
-
... More
DSR 2022(E&M) CODE NO:9.1.21: Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3½ X 35 sq. mm (32mm)
8
2588
-
... More
DSR 2022(E&M) CODE NO:9.1.33: Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 4 X 16 sq. mm (28mm)
4
1083
-
... More
DSR 2022(E&M) CODE NO:9.1.32: Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 10 sq. mm (25mm)
2
471
-
... More
NON DSR ITEM: Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3X6sq.mm. XLPE Aluminium Cable
76
11389
-
... More
NON DSR ITEM: Supply Installation testing and commissioning of 5 mtr long GRP Street light pole having TIP outer diameter of 89 mm and ground (bottom) diameter of 142 mm including 30 W LED Street Light Luminaire . complete with 300 mm x 300 mm x 6 mm thick MS plate welded at bottom including welding of 1 no. earth stud and drilling holes for drawing the wire etc. complete as required including cement concrete foundation, wiring and connections. A looping/ junction box shall be inbuilt into the pole.
The pole surface shall be free from crack or bubbles or damage. any exposed fibre and smooth surface shall be uniformly coloured. The GRP poles shall be finished with ultraviolet resistant uniform coating equal to the performance of the aliphatic polyurethane.
The pole length shall has a tolerance of not exceeding 0.3m per 10m.,deflection of the pole as per the AASHTO LTS-4 will not exceed a 10% of the length of the pole above the ground line when subject to maximum wind loading & will not shall be have more than 1% permanent deflection.
32
453120
-
... More
NON DSR ITEM: Supplying, installation, testing & commissioning of 45W Post Top LED fitting and accessories including wiring with 3x2.5sqmm copper wire from JB to light fitting, connections etc. as required. (BAJAJ BRIL 45W LED NW or equivalent)
5
73750
-
... More
NON DSR ITEM: Design, S,I.T.C. of Solar Street lights with 2 nos. (12V/120W Total) SPV Panels, 1 Set LED 30 Watts, 2 nos. 12V-120Ah Tubular Battery, charge controller, battery box, pole, & mounting structure. controller, battery box, pole, & mounting structure.
6
708000
-
... More
NON DSR ITEM: Supply and fixing of floor mounting, totally enclosed, compartmentalized, cubical, dust, vermin proof and outdoor type EXTERNAL LIGHTING PANEL fabricated out of 2mm thick cold rolled carbon annealed, sheet steel, internally strengthened with angle iron frame work with following incoming and outgoing feeders (fabricated out of 2mm CRCA sheet steel) including supplying and mounting including making connections / interconnections with lugs / glands crimping tools, testing and commissioning of following items inside the panel:-Incoming 40A TPN MCB(16KA) 1 No. Time Switch with daily dial suitable for operation on 230V single phase 50Hz AC supply 1No. Auto Manual Selector Switch 1 No.Bus Bars TPN bus bar of 63A rating Outgoings 32A DP MCB 6No. Indication lamps (LED Type) ON-OFF for all Outgoings Road lighting Pillar of above details & specifications
1
34222
-
... More
NON DSR ITEM: Supply & erecting of following items for substation. Rubber hand gloves suitable for 11 KV.
1
1947
-
... More
NON DSR ITEM: Shock treatment chart both in Hindi & English for treating person suffering due to electric shock mounted on wall hooks.
2
4130
-
... More
NON DSR ITEM :Supply & fixing of caution board as per IS-2551, The boards shall be enamelled & written in Hindi/English/ Local Language - 11kV
2
2034
-
... More
NON DSR ITEM: Supply & fixing of caution board as per IS-2551, The boards shall be enamelled & written in Hindi/English/ Local Language - 415V
10
7267
-
... More
NON DSR ITEM: Carbon dioxide fire extinguishers of 4.5 kg each mounted on wall hooks as per IS : 2878-1976 complete with all accessories.
10
109011
-
... More
NON DSR ITEM: Dry chemical fire extinguishers 5 kg as per IS: 2171-1976 mounted on wall hooks
5
43605
-
... More
NON DSR ITEM: G.I. Fire buckets 13 litre capacity filled with dry sand and fixed on wall on hook made out of 13mm dia MS rod & conforming IS 2546 - 1974.
4
14532
-
... More
NON DSR ITEM: First aid box containing material as prescribed by St. John Ambulance brigade OR Indian Red Cross complete as required.
1
2478
-
... More
NON DSR ITEM: Insulation mat 914.4 mm wide and 15 mm thick to withstand 11 KV dielectric strength as per IS 15652
2
3162
-
... More
NON DSR ITEM: Insulation mat 914.4 mm wide and 6 mm thick to withstand 1.1KV dielectric strength as per IS 15652
10
8378
-
... More
NON DSR ITEM: Design and engineering for Polycrystalline type Solar Power Plant of 15KWp as per specification 8153-13-PS-001 SPL including all necessary Mounting civil work and supply to DB compete as per Following Procurement of Solar Photovoltaic Modules, Inverters, Mounting Structures and other components as per the system requirement including Earthing Kits & Lightning Arrestors, where applicable. Invertor should confirm IEC security and safety Codes All the structural activities pertaining to the mounting of the Solar Modules as given below Installation of module mounting structures Installation of modules on to the structures Supply and Laying of Cables up to the Junction Boxes Installation of Inverter Supply and Laying of Cables up to the Input of the Inverters Supply and Installation of Earthing Electrodes And all the other activities required for completing the Installation of Solar Power Plant till the project is handed over to the client. Erection ,Procurement&Commissioning of the complete Solar PV Power Plant Data Monitoring System. Quoted Price shall include obtaining approval from statutory authorities. Solar panel supply and erection work shall be carried out as per MNRE Approval Agency. Net metering complete as required, Grid synchronising System complete. Fast acting relay shall be provided for isolation of solar power plant in case of grid outage.
(JOB)
1
1327500
-
... More
DSR 2022(E&M) CODE NO:1.10.2: Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. Group B
274
283970
-
... More
DSR 2022(E&M) CODE NO:1.10.3 :Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. Group C
855
1099769
-
... More
DSR 2022(E&M) CODE NO:1.11 :Wiring Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.
2
2739
-
... More
DSR 2022(E&M) CODE NO:1.12 :Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
3960
1159686
-
... More
DSR 2022(E&M) CODE NO:1.14.2 :Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
5120
1234534
-
... More
DSR 2022(E&M) CODE NO:1.14.4 :Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 X 6 sq. mm + 1 X 6 sq. mm earth wire
150
57738
-
... More
DSR 2022(E&M) CODE NO:1.14.9 :Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 4 X 6 sq. mm + 2 X 6 sq. mm earth wire
475
314027
-
... More
DSR 2022(E&M) CODE NO:1.14.10 :Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 4 X 10 sq. mm + 2 X 6 sq. mm earth wire
896
789546
-
... More
DSR 2022(E&M) CODE NO:1.24.8 :Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Bell push
10
1227
-
... More
DSR 2022(E&M) CODE NO:1.25 :Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
257
83149
-
... More
DSR 2022(E&M) CODE NO:1.26 :Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
140
4909
-
... More
DSR 2022(E&M) CODE NO:1.31 :Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings).
422
176497
-
... More
DSR 2022(E&M) CODE NO:1.32 :Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.
98
50353
-
... More
DSR 2022(E&M) CODE NO:1.38 :Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required.
10
868
-
... More
DSR 2022(E&M) CODE NO:1.45 :Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.
257
76390
-
... More
DSR 2022(E&M) CODE NO:1.50.1 :Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm sweep
76
29986
-
... More
DSR 2022(E&M) CODE NO:1.51 :Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.
76
13794
-
... More
DSR 2022(E&M) CODE NO:2.3.1 :Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 6 way, Double door
6
11605
-
... More
DSR 2022(E&M) CODE NO:2.4.1:Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required (but without MCB/RCCB/Isolator) 4 way (4+12) Double Door
22
78914
-
... More
DSR 2022(E&M) CODE NO:2.4.2 :Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required (but without MCB/RCCB/Isolator) 6 Way (4+18), Double Door
5
21806
-
... More
DSR 2022(E&M) CODE NO:2.10.1 :Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole
426
95619
-
... More
DSR 2022(E&M) CODE NO:2.10.3 :Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Double Pole
6
3451
-
... More
DSR 2022(E&M) CODE NO:2.10.5 :Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Triple pole and neutral
13
13997
-
... More
DSR 2022(E&M) CODE NO:2.11 :Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
56
638
-
... More
DSR 2022(E&M) CODE NO:2.13.1 :Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps
13
11056
-
... More
DSR 2022(E&M) CODE NO:2.13.2 :Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 amps
12
10879
-
... More
DSR 2022(E&M) CODE NO:2.15.2 :Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps
30
83858
-
... More
DSR 2022(E&M) CODE NO:2.18 :Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 amps "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
26
36954
-
... More
DSR 2022(E&M) CODE NO:4.1.2 :Supplying and installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.
150 mm width X 50 mm depth X 1.6 mm thickness
74
39189
-
... More
DSR 2022(E&M) CODE NO:4.1.6 :Supplying and installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.
450 mm width X 50 mm depth X 2.0 mm thickness
124
123619
-
... More
DSR 2022(E&M) CODE NO:4.2.2 :Supplying and installing following size of perforated pre-painted M.S. cable trays bends with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.
150 mm width X 50 mm depth X 1.6 mm thickness
38
33918
-
... More
DSR 2022(E&M) CODE NO:4.2.6 :Supplying and installing following size of perforated pre-painted M.S. cable trays bends with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.
450 mm width X 50 mm depth X 2.0 mm thickness
48
96504
-
... More
DSR 2022(E&M) CODE NO:5.4:Earthing with G.I. earth plate as per IS:3043 including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
52
340678
-
... More
DSR 2022(E&M) CODE NO:5.11:Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.
274
169614
-
... More
DSR 2022(E&M) CODE NO:5.15:Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
240
51345
-
... More
DSR 2022(E&M) CODE NO:6.2:Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required.
4
1816
-
... More
DSR 2022(E&M) CODE NO:6.4:Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required.
16
1585
-
... More
DSR 2022(E&M) CODE NO:6.7:Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run)
830
91698
-
... More
DSR 2022(E&M) CODE NO:6.8: Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run)
280
48364
-
... More
DSR 2022(E&M) CODE NO:6.12: Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required
32
3394
-
... More
DSR 2022(E&M) CODE NO:6.14:Providing and laying G.I. tape 32 mm X 6 mm from earth electrode directly in ground as required.
1276
218170
-
... More
DSR 2022(E&M) CODE NO:5.6:Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
2
24266
-
... More
DSR 2022(E&M) CODE NO:5.8:Supplying and laying 25 mm X 5 mm copper strip at 0.50 meter below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50 mm)
10
8522
-
... More
DSR 2022(E&M) CODE NO:5.14: Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.
40
40754
-
... More
DSR 2022(E&M) CODE NO:1.41:Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
488
88142
-
... More
DSR 2022(E&M) CODE NO:1.45:Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.
257
76390
-
... More
NON DSR ITEM: Supply of 20W wall mounted LED Batten light. Make- Philips BN021C LED 20S or Equivalent
88
88264
-
... More
NON DSR ITEM: Supply of 12W surface mounted circular LED light. Make- PHILIPS SM 250C LED 12S or Equivalent
315
446040
-
... More
NON DSR ITEM: Supply of 12W LED Wall Bracket Light. Philips My Living or Equivalent
47
110920
-
... More
NON DSR ITEM: Supply of 12W Bulk head light. Make- WIPRO or Equivalent
32
60038
-
... More
NON DSR ITEM: Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B complete erected in position with all accessories. Supplied model shall be suitable for working without remote and compatible with regulator control (Make-HavellsEfficiencia Neo or Equivalent)
257
1120545
-
... More
NON DSR ITEM: Supplying of Exhaust Fan Heavy duty 230V A.C 50 cycles 380 mm 1400 RPM complete erected in position with all accessories.(Make- HavellsTurboforce SP or equivalent)
44
225073
-
... More
NON DSR ITEM: Supplying of Exhaust Fan Heavy duty 230V A.C 50 cycles 230 mm 1400 RPM complete erected in position with all accessories.(Make- Havells VENTILAIR DS or equivalent)
32
81561
-
... More
NON DSR ITEM: Supply of 2X 18W wall mounted LED Batten light. PHILIPS TMC 501+ MAS LED Tube or equivalent
289
716142
-
... More
NON DSR ITEM: Supply of 70W LED Flood light (Crompton LFL 70CDL or equivalent)
6
64428
-
... More
NON DSR ITEM: 10W LED Batten for Mirror light( WIPRO GARNET or equivalent)
19
9864
-
... More
DSR 2022(E&M) CODE NO:1.18.2: Supplying and drawing following pair 0.5 sq. mm FR PVC insulated annealed copper conductor, unarmoured telephone cable in the existing surface/ recessed steel/ PVC conduit as require 2 Pair
300
9996
-
... More
DSR 2022(E&M) CODE NO:1.19: Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.
200
8242
-
... More
DSR 2022(E&M) CODE NO:1.21.2: Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm
400
50856
-
... More
DSR 2022(E&M) CODE NO:1.24.6: Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Telephone socket outlet
30
3893
-
... More
DSR 2022(E&M) CODE NO:1.24.7: Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. TV antenna socket outlet
20
2595
-
... More
DSR 2022(E&M) CODE NO:1.27.1: Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 1 or 2 Module (75mmX75mm)
40
10451
-
... More
NON DSR ITEM: Supplying, fixing, connecting &testing of Telephone Tag Block krone type in a suitable size 1.6 mm thick dust and vermin proof Sheet steel enclosure duly painted by synthetic enamel over anti corrosive primer, lockable and hinged cover with provision for cable through glands complete in all respects. 10 pair Krone
26
18377
-
... More
NON DSR ITEM: Supplying, fixing, connecting &testing of Telephone Tag Block krone type in a suitable size 1.6 mm thick dust and vermin proof Sheet steel enclosure duly painted by synthetic enamel over anti corrosive primer, lockable and hinged cover with provision for cable through glands complete in all respects. 20 pair Krone
5
6224
-
... More
NON DSR ITEM: Supplying, laying, testing and commissioning of following size annealed tinned copper conductor PVC insulated and sheathed armoured copper telephone cables with suitable clamps, saddles and including making terminal joints complete as required. 10 pair
220
43353
-
... More
NON DSR ITEM: Supplying, laying, testing and commissioning of following size anealed tinned copper conductor PVC insulated and sheathed armoured copper telephone cables with suitable clamps, saddles and including making terminal joints complete as required. 20 pair
120
34692
-
... More
NON DSR ITEM: Supply, installation, testing and commissioning of front operated, front / back access, cubicle type, indoor duty, floor / wall / recess / surface mounted (as specified), totally enclosed dust and vermin proof switchboards / panels with minimum Ingress protection classification of IP 44, fabricated from 2 mm thick CRCA sheets with dip coat priming and epoxy powder coated finish. The panel must be suitable for 415 volts 3 phase, 4 wire, 50 Hz, system , must be able to withstand symmetrical fault level of 50 KA for 1 sec at 415 V and must include all interconnections, earthing and bonding requirements etc. The panel must conform to standards, as required and as given below. The Switchboard shall be provided with detachable gland plates for entry of cables from the top / bottom as required. All live accessible parts shall be shrouded and all equipment shall be finger touch proof. The busbars shall be insulated with heat shrinkable sleeves. SMC / DMC shrouds and busbar supports suitably spaced shall be used. Hinged doors with padlocking facility shall be provided on all outgoing feeders with switch handles lockable in OFF position. The panel shall have aluminiumbusbars with bar type feeder connections, spacers etc. with full sized neutral. Panel / Switchboard board design shall be compact and components / accessories of compact sizes shall be used to economise the room space available. Employer reserve the right to seek compact items in place of larger ones.
MDB SCHOOL BUILDING Incomer: 1 Nos. 200 A FP MCCB 35 KA with microprocessor based release for O/C, SC & E/F protection, 3 Nos. CT 200/5 A class 1.0, MFM, TNC Switch, Indication for Phase, CB 'ON', 'OFF', 'TRIP' complete as required. 1 no 40 A 4 Pole MCB Fixed to Solar Panel Bus Bars Electrolytic high conductivity FP aluminium conductor bus-bars rated 250 Amps, suitable to withstand symetrical fault level of 35 KA for 1 second at 415 volts and with necessary heat shrinkable sleeving. Outgoing: 4 Nos. 63 A TPN MCB 25 KA with thermal-magnetic release for O/C & SC protection 15 Nos. 40 A TPN MCB 25 KA with thermal- magnetic release for O/C & SC protection 12 Nos.32 A TPN MCB 25 KA with thermal-magnetic release for O/C & SC protection Normal MDB complete as above and required:
1
329220
-
... More
NON DSR ITEM: FEEDER PILLAR FOR QUARTERS
Cubicle compartmentalized outdoor type Feeder Pillars suitable for IP55 rating with double door and hut type top, enclosure fabricated out of 2 mm thick CRCA sheet steel and base channel 75mm x 40mm and suitable for operation on 415 volts, 50 Hz, AC Supply, with switch gear and accessories as below complete with pad locking sealing arrangement, earthing stud labeling, painting, interconnections, providing of danger plates etc. complete as required.
Incoming 1 No. 200 A, TPN, 35 kA, MCCB having Thermal Magnetic Trip Unit with protection against Overload & Short Circuit, 0-200 A Digital Ammeter with inbuilt ASS, 3 Nos. CT 200/5A, class 1.0 for metering and LED Indication Lamp for ON, OFF & TRIP Bus Bars Electrolytic high conductivity 3P, 4W aluminium conductor bus-bars rated 200 Amps, suitable to withstand symetrical fault level of 35 KA for 1 second at 415 volts and with necessary heat shrinkable sleeving.
Outgoings: 4 Nos. 63 A TPN MCB 25kA 1 Nos. 40 A TPN MCB 25kA FEEDER PILLAR complete as above and as required.
1
147500
-
... More
NON DSR ITEM: METER BOARD :
Incoming 1 No. 63 A, TPN, 35 kA, MCCB having Thermal Magnetic Trip Unit with protection against Overload & Short Circuit, kwh meter, 3 Nos. CT 63/5A, class 1.0 for metering and LED Indication Lamp for ON, OFF & TRIP. Bus Bars Electrolytic high conductivity 3P, 4W aluminium conductor bus-bars rated 100 Amps, suitable to withstand symetrical fault level of 35 KA for 1 second at 415 volts and with necessary heat shrinkable sleeving.
Outgoings: 4 Nos. 32 A TPN MCB 4 Nos. 10-40 A 3-phase, 4-wire, 415V AC Digital Energymeter with Fuse protection
2 Nos. 10A DP MCB Meter Board complete as above and as required.
3
442500
-
... More
NON DSR ITEM: METER BOARD : Incoming 1 NO. 40 A TPN MCB
Outgoings: 1 Nos. 40 A TPN MCB 1 Nos. 10-40 A 3-phase, 4-wire, 415V AC Digital Energymeter with Fuse protection Meter Board complete as above and as required.
1
29500
-
... More
NON DSR ITEMS:Supply Installing Testing & Commissioning of adequate number of First Aid Hose Reel, hose reel feed piping and feed pump at terrace level with required supports, brackets, fittings, cabling and starter Panel.
Feed Pump at terrace : Pressure (min.) : 3.5 kg/cm2 Capacity : min.450 lpm/as per NBC requirement whichever is higher
1
354000
-
... More
NON DSR ITEMS: Supply and fittings of Signs at all exits, emergency exits and escape routes, which should comply with the relevant Indian Standards and statutory requirements and other miscellaneous firefighting symbols and equipment.
1
50000
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements