Sri Krishnadevaraya University Tender

R04 - Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1, 6, 12 (1 cement . 6 coarse sand . 12 graded stone aggregate 20 mm nominal size) upto plinth level with Cement mortar 1.6 (1 cement . 6 coarse sand

R05 - Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1.6 (1 cement. 6 coarse sand)

R06 - Construction of Embankment by excavating the available approved Gravel, Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water, all materials,usage& all other appurtenaces required to complete the work

R07 - Providing and laying in Cement Concrete for all Basement and surface level works, return walls, retaining walls, sunken floors etc. The granite, trap, basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead and lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates

R08 - Providing and constructing load bearing wall with Solid Concrete blocks of size 400 x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 Nper sqmm conforming to IS 2185 (Part, I) 2005 and constructed with CM 1,4 as per IS 2572, 2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications

R09 - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite, trap, basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates

R10 - SHUTTERING WORK

R11 - Supplying, fitting and placing TMT FE 550 bar 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping ,welding joints, tying with binding wire , soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.

R12 - Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer in Charge.

R13 - Providing & fixing corrugated G.S. sheet roofing including vertical, curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete as per design drawings (up to any pitch in horizontal, vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as per the direction of Engineer in charge.0.63 mm thick with zinc coating not less than 275 g per sqm

R14 - Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc

R15 - Providing & fixing of 2track x 2panel sliding windows made out of multi chambered UPVC (Matching to RAL9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets , grey colour having isolated drainage and reinforced with Galvanized Iron profile through,out the window frame. The outer frame having an overall size of 50mm width x 42mmheight with reinforcement of 1mm thickness and Sash with overall size of 31mm X 57mm with Gi reinforcement of 1mm for the frame and 1.5 mm for the sash. Coextruded Glazing bead for fixing of glass shall be of size 21.5mm x 9.5 mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 1.8 , plus or minus 0.2 mm. Maximum possible size 1519mm x 1519mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made)

R16 - Providing Flush , Ruled pointing: Pointing on stone work with cement mortar 1,3 (1 cement , 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per specifications and as per directions of Engineer in charge.

R17 - Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.

R18 - Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer in-charge

R19 - Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade, Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer in charge.

R20 - Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications, Two coats applied on walls at 1.25 L per 10 sqm over and including one coat of Special primer applied at 0.75 L per 10 sqm with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (The gloss should be 50 percent at 60 degree angle with 10 years life)

R21 - Providing and laying Black Lapotra Granite stone flooring in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20 mm (average) thick base of cement mortar 1,4 (1 cement, 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer in Charge.

R22 - Providing and laying Cement concrete flooring 40 mm thick with 20 mm nominal size stone aggregate using 1, 2, 4 (1 cement, 2 coarse sand ,4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry complete.

R23 - Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M30 grade made of C and waste by block making machine with vibratory compaction laid in required pattern and including over 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer in charge