Sri Krishnadevaraya University Tender

2AA - Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 g/L, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats as per specifications and as per directions of Engineer in charge. Ground Floor Inside Walls.

2BB - Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 g/L, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats as per specifications and as per directions of Engineer in charge. First Floor Inside Walls.

2CC - Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 g/L, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats as per specifications and as per directions of Engineer in charge. Second Floor Inside Walls.

3AA - Finishing walls with 100Percentatage Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489,2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied at 1.43 L/ 10 m2. Over and including priming coat of exterior primer applied at 0.90 L/10 m2 with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and and paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Ground Floor outside Walls.

3BB - Finishing walls with 100Percentatage Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489,2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied at 1.43 L/ 10 m2 Over and including priming coat of exterior primer applied at 0.90 L/10 m2 with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and and paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. First Floor outside walls.

3CC - Finishing walls with 100Percentatage Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489,2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied at 1.43 L/ 10 m2. Over and including priming coat of exterior primer applied at 0.90 L/10 m2 with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and and paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Second/ Terrace Floor outside Walls.

4AA - Varnishing with varnish of approved brand and manufacture, One coats with copal varnish including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.

4BB - Melamine polishing on wood work (one coat) including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.

5AA - Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied at 0.90L/10 m2 over an under coat of primer applied at0.75 L/10 m2 of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Ground Floor Doors

5BB - Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied at 0.90L/10 m2 over an under coat of primer applied at0.75 L/10 m2 of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. First Floor Doors

5CC - Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied at 0.90L/10 m2 over an under coat of primer applied at0.75 L/10 m2 of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Terrace Floor Doors.

6AA - Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied at 0.90L/10 m2 over an under coat of primer applied at 0.80 L/10 m2 of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Ground Floor Windows & Ventilators Grill Painting.

6BB - Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied at 0.90L/10 m2 over an under coat of primer applied at 0.80 L/10 m2 of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. First Floor Windows & Ventilators Grill Painting.

7AA - Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. 30mm thick both side commercial.

7BB - Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges. with one side prelam.

8AA - Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate sections and other sections of approved make conforming to IS, 733 and IS,1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) ,For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) including cost of materials, labour, usage charges of machinery complete as per specifications.

8BB - Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item),With float glass panes of 4.0 mm thickness (weight not less than 10kg/ m2) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.

9AA - Repairing and fixing shutters (panelled or glazed) to doors, windows, ventilators and cupboards.

10AA - Providing and fixing brass bib cock of approved quality 15mm nomnal bore.

11AA - Providing and fixing brass stop cock of approved quality 15mm nomnal bore.

12AA - Providing and fixing PTMT pillar cock of approved quality and colour. 15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 gms.

13AA - Providing and fixing ball valve (brass) of approved quality and colour. High or low pressure with plastic floats complete..

14AA - Providing and fixing unplasticised PVC connection pipe with bass unions. 45cm long, 15mm nominal bore.

15AA - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work. 25mm nominal dia pipes.

16AA - Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS , 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

17AA - Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require,White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps.

18AA - Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS , 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required , W.C. pan with ISI marked white solid plastic seat and lid.

19AA - Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS , 7231, with all fittings and fixtures complete. 10 Litres capacity white ( PWD Common SR 2023-24, Vol,02, Page-132&133, I.No,14.18.2)

20AA - Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 32mm dia.

21AA - Dubbing out on old irregular walls average 10mm thick and making good the surface with cement mortar 1,4 including curing cost of materials, labour, complete as per specifications.

22AA - Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1,3,6 Using 20 mm nominal size graded crushed coarse aggregates.

23AA - Providing PVC ringtite pipes conforming to IS 4985,2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete.

24AA - Flush pointing with cement mortar 1,3 (1 cement , 3 fine sand) mixed with 2Percentatage of integral water proofing compound by weight of cement for flat tile bricks on top of mud phaska ,With tiles for joint filling.

25AA - Providing and laying 60mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63,2018 & IS 15658 for Cycle Tracks & Pedestrian Footpaths of approved shape and colour, laid in required pattern and including over 30mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-incharge. (WMM/WBM Base to be paid separately if necessary as per relevant technical specification).