South Western Railway Tender
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
Costs
EMD
₹ 4,34,600Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
SG-SWR-PROJ-UBL-5LCs-UBL-PROJECT-S AND T/SOUTH WESTERN RLYTender No
SG-SWR-PROJ-UBL-5LCsTender Authority
South Western Railway ViewPurchaser Address
-Website
http://ireps.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Supply of FRP road warning equipment. [inspection by RDSO].
5
24417
122085
... More
Manufacture and supply of road warning signal on both sides of the level crossing 3 gates audio and visual warning consisting of Embedded based LC control, signal pole 210/220mm dia Red, yellow signal with high bright day light LED's current controller, hooter with programmable sound amplified card and electronic flashing housed in a Aluminium enclosure mounted on a pole. This system should work on 24v DC. 2No.s of Audio and visual road warning system. [inspection by RDSO]. 4
5
150000
750000
... More
Transportation and installation of EOLB 5
5
40000
200000
... More
Supply of Emergency Sliding Boom. 6
5
301970
1509850
... More
Erection and commissioning of sliding boom type LC gate 7
5
4380
21900
... More
Supply of LC Gate panel.[inspection by Consignee].
4
111003
444012
... More
Supply of RELAY, AC immune, plug in type style 'QNA1' DC neutral line, 24V,8F/8B contracts front and back contacts metal to carbon with plug board, retaining clip & connectors conforming to BRS:931A,IRS: S@45<44@ IRS- S34& IRS:S-23AS.[inspection by RDSO].
60
10911
654660
... More
Supply of Relay non AC Immune, plug in type 'QN1 Neutral line, 24V DC 8F/8B 9 contacts, front and back contacts metal to carbon, complete with plug board, retaining clip and connectors conforming to BRS:930, IRS: S- 34, and IRS: S-23 (As applicable). The interlocking code for the unit shall ABCDF for 24V. Inspection by RDSO.
160
10226
1636160
... More
Supply of relay plug in type style AC LED all aspect AC lamp proving relay unit with 10 inbuilt current transformer type slow release neutral line relay 4F/4B contacts front and back contacts metal to carbon shall be suitable for working series with the 110V LED signal lamp rated at 15w confirming to RDSO Spec. no-STS/E/relays/AC-lit/LED/signal/09-2020 ERS.941A ,IRS- S-34 and IRS-S- 23, as applicable the interlocking code for this unit shall be ABDHK.[inspection by RDSO]. 11
50
15626
781300
... More
Supply of Electronic timer 60 Sec.[inspection by RDSO].
30
3885
116550
... More
Supply of RED Aspect LED signal lamp for Main colour light signals (Integrated), 110 V AC, retro-fittable in Existing CLS housing and Compatible with AC LED ECR as per RDSO Specification No. RDSO/SPN/199/2010 (Rev.1.1) or latest Amendment.[inspection by RDSO].
25
8189
204730
... More
Supply of Yellow Aspect LED signal lamp for Main colour light signals (Integrated), 110 V AC, retro-fittable in Existing CLS housing and Compatible with AC LED ECR as per RDSO Specification No. RDSO/SPN/199/2010 (Rev.1.1) or latest Amendment.[inspection by RDSO].
25
8189
204730
... More
Supply of LED signal Lamps "GREEN Aspect for Main Colour light signal for Railway Signalling As per RDSO spec. No RDSOSPN/199/2010 ver.1 or latest.[inspection by RDSO].
25
9369
234230
... More
Supply of FRP two aspect colour light unit 2A assembly (Terminal box, mounting socket, hood, side flange and fixing bolt & nut, eye bolt, M12 bolt-3 Nos. Jand Fixing bolt 08 Nos. (Inspection -RITES
11
19116
210276
... More
Supply of FRP CLS Signal Units 3 Aspect unit without lenses, lamps and transformer as per RDSO Specification. No. RDSO/SPN/194/2006 Rev 2.0 or latest. Accepted Make: Akshay. [inspection by RITES].
8
21004
168032
... More
Supply of 4 Aspect Colour Light Signal Unit FRP Body without lenses and transformers as per RDSO spec. no. RDSO/SPN/194/2006.[inspection by RITES].
1
22066
22066
... More
Supply, Installation & Commissioning of SMPS based mini IPS system conforming to 18 RDSO Spec. No. RDSO/SPN/165/2012 (Ver.3.0) and Drg. No. SDO/PS/L/007 along with 110 V 200 AH VRLA secondary Cell as per IRS:S-88/2004 with battery rack, SPDS, Tools kit, Charging of batteries with supply of Electrolyte, Installation, testing and commissioning, configuration of different modules of IPS for working of signalling System for interlocked LC gate.[inspection by RDSO].
5
920990
4604950
... More
Supply of Cable termination racks size 880mm x 2 meters made out of 50mmx 50mm X 6mm thick MS angle with stainless steel nuts and bolts for fixing of the rack with Power coated and drilling suitable holes to suit hylam sheet and relay frames complete as per standard practice with tripod bases and reel insulators (for K rack, P rack and power rack) and with cable ladder of width 400mm and length of 2mtr. The thickness of angle to be 5mm two angles of 40mmX40mmX5mm to be supplied at both ends and supporting flats of 25mmX 5mm.[inspection by Consignee].
4
8000
32000
... More
Erection of CT Rack with scaffolding suitably concreting tri-pod bases and reel insulators with "J" bolts and nuts. Tripod and other supporting are to be painted in 2 coats with enamel
4
4500
18000
... More
Supply of Relay rack universal type as per Drg. No. S&T/MFT/291 with scaffolding. 21 Power Coated with stainless steel nuts and bolts fixing the racks. Supporting angles, frame mounting triangle base with "J" bolts and insulation of required numbers complete to suit Qn1 /K50 pre wired tag blocks with suitable inner frames (a) Relay Rack 1 way.[inspection by Consignee]. 22
5
6000
30000
... More
Concreting and erecting of relay rack-56 capacity. 23
5
3000
15000
... More
Supply of GRS apparatus case full.[inspection by RITES]. 24
20
60794
1215880
... More
Supply of GRS apparatus case half.[inspection by RITES].
35
46071
1612485
... More
Supply of material to construct Unit maintenance free earth consisting as per RDSO spec. No. RDSO/SPN/197/2008 consisting of[inspection by RDSO].
50
21000
1050000
... More
Installation of unit maintenance free earth as supplied in schedule includes i) Digging of earth to required depth ii) insertion of electrodes iii) Filling of earth enhancing compound (Approx.30Kgs). iv) Provision of exothermic weld connection to copper tape of 25mm x 6mm 26 x150mm-01 no to earth electrodes (All the materials tools and feature required for weld will be arranged by the contractor). v) This includes CC cover 1.5 ft x 1.5ft 1 ft wall thickness 2"" with cover 3"" thickness. Cables 35 Sq mm/16Sq mm/10sq mm for connecting earth to bas bar, bus bar to bus bar, bas bar to various equipment. Earth electrode of 17 mm dia and 3.0m long high tensile low carbon steel. circular rods and outer surface (minimum copper bonding thickness of 250 micron to made requirement of under writer's laboratories (UL) 467-2007 or Latest
50
7500
375000
... More
Provision of conventional pipe earth and its connections as given in the technical specification (All the materials are to be arranged by Contractor) [inspection by Consignee].
50
3500
175000
... More
Supply of basic material to construct unit maintenance free ring earth with four pits for interlocked LC gates, B signalling applications) for achieving less than one ohms consisting as per RDSO spec No. RDSO/SPN/197/2008 and as per technical specification.[inspection by RDSO].
5
76900
384500
... More
Installation of Maintenance free ring earth with four pits for achieving less than one ohm as per RDSO Spec No. RDSO/SPN/197/2016 ver.1 or latest as per relevant Technical specification.
5
42000
210000
... More
Supply, installation, testing & commissioning of Dual Card E1-converter for FEP. [inspection by Consignee].
5
24000
120000
... More
Supply of dual card leased line modem for RTU as per Spec IRS.99/2006 Amdt - 3 or latest.[inspection by Consignee]. 32
5
24000
120000
... More
Failure analysis software for RTU
5
30000
150000
... More
Supply of Central Monitoring unit (CMU) as per RDSO Spec.IRS:S:99/06 or latest Specification A1 (Inspection RDSO) A1 : Technical specification for CMU, processor: intel core i7 13th 33 gen, or similar, memory :8GB, Hard disk: 512 GB, optical driver :DVD writer, ports: two(2) nos serial port,4 USB ports, key board: USB keyboard, mouse :USB keyboard, DP/HDMI ports:2 nos MONITOR: 24" IPS monitor, operating system :window 11 professional (licenced version),[inspection by Consignee]. 34
5
175000
875000
... More
Testing and commissioning of central monitoring unit (CMU)
5
15000
75000
... More
Supply and installation of GSM/GPRS modem and adapter card compatible for 4G (LTE) 35 connectivity and networking of RTU with GSM modem communication. The GSM modem shall be worked on 5V DC with SIM interfacing facility and it should have SIM card holder, 4G LTE 5 dBi magnetic mount antennas 232 serial port, DC power connector, standard AT command interface etc. The software, if any required for RTU connectivity shall also be supplied by the contractor. SIM card with one year recharge with data pack to be ensured.[inspection by Consignee].
2
24957
49915.14
... More
Supply and installation of Earth leakage detector as per RDSO/SPN/256/2002 or latest with 6 digit counter (in 19 inch sub rack with insulation tester) 12 channel (110V-DC-01 channel 110V AC - 04 channels and 24 V DC-07channels).[inspection by RDSO].
5
92040
460200
... More
Supply of Resistors/ Condensers/ Diodes/ Electrolytic Condensers 470 mfd.[inspection by Consignee]. 38
15
55
825
... More
Supply of Electrolytic Condensers 50V/1000/2000 mfd.[inspection by Consignee]. 39
15
90
1350
... More
Supply of wire wound Resistor 10W/100/150/500/2200.[inspection by Consignee]. 40
50
70
3500
... More
Supply of Diodes by 127/IN5408.[inspection by Consignee].
20
36
720
... More
Redesign of EI systemalterations as per approved signalling plan. This involves redesigning of EI system alteration as per approved signalling plan, supervision of installation for 41 alterations, testing and commissioning. Design of Modification of the existing interface and interlocking ckts including design of the same is also covered under this schedule item. Modifications to the application logic software of VDU and MT are under scope of this item. Alteration to the relay racks wiring as per the approved interface ckts including supply of all necessary wiring material/racks at station. FAT and SAT are to be carried out as part of this schedule item
2
2400000
4800000
... More
Supply of station telephone(master telephone) for electronic LC gate telephone system as per RDSO specification IRS TC RDSO SPN TC/51/2021 Rev 1.0.[inspection by RDSO].
10
52000
520000
... More
Supply of electronic LC gate telephone (slave telephone) for Electronic LC Gate System as per RDSO Specification No. RDSO/SPN/TC/51/2021 (rev 1.0) or latest.[inspection by RDSO].
20
5200
104000
... More
Supply of Centralized power supply system 24V DC power pack with 7AH MF battery for electronic LC gate Telephone as per RDSO specification No RDSO/SPN/TC/51/2021 Rev 1.0) or latest.[inspection by RDSO].
10
7000
70000
... More
Supply of 4 wire DTMF Way Station Control phone as per RDSO Specification, IRS- TC@45&47@97 with Amd.No.2 latest.[inspection by RDSO].
5
1799
8997.5
... More
Supply of 4 wire DTMF Way station equipment (Decoder) as per RDSO specification, IRS-TC@45<47@2007 or latest.[inspection by RDSO].
5
3200
16000.8
... More
Supply of Power Supply Unit for Way Station Equipment with MF Battery 12 Volt / 7 AH as per RDSO Specification No IRS-TC-72/97 with Amdt. 1 or latest. Make Epsilon or similar.[inspection by Consignee].
5
3059
15298.7
... More
Supply of jointing kit conforming to RDSO specification No. IRS-TC 77/2006 Revision 1 or latest for quad cable from RDSO approved firms.[inspection by Consignee].
10
4000
40000
... More
"Provisional of normal joint of Heat Shrinkable type complete for 6 quad cable. After the jointing the through cable has to be tested for insulation resistance and loop resistance n presents 49 of Railway Engineer and in case of any defects the jointing has to be done at free of cost by the contractor. [Heat Shrinkable jointing kit conforming to RDSO specification No. IRS-TC 77/2006 covered in the supply portion has to be used for this purpose. The contractor should supply all other small items free of cost which are required for making a joint. Only gas blower to be used for blowing]"
10
3500
35000
... More
Standard 19" Rack Mountable device consisting of four E1 interface, dual optical ports with dual core and Single core path 20 Kms driving distance. Multi direction supporting up to 5 directions either with optical or E1. Ethernet ports for camera connectivity. RS232 interface for RTU connectivity. EM cards with 8*E&M ports with 2W/4W setting. FXO/FXS card support with 10*FXO/FXS ports. Total 4 hot swappable slots for field upgradable Multi service Modular cards. Device Management with Telnet & NMS. Unit Support Audio Buzzer Alarm Interface. Potential Free contact. Dual DC with 18-72VDC range. Accessories - AC-DC adaptor, E1& E&M cable. Similar to MAPLE 4C (O) (V4) (Inspection by RITES)
5
291900
1459500
... More
Supply of 10 Channel FXO card supports to MAPLE 4C (O) (V4) with accessories and cables. Make: MROTEK/MAPLE (Inspection by consignee)
25
58797
1469925
... More
Supply of 10 Channel FXS card supports to MAPLE 4C (O) (V4) with accessories and cables. Make: MROTEK/MAPLE (Inspection by consignee)
5
58797
293985
... More
Desktop PC with wireless keyboard and mouse for office use.[inspection by Consignee]. 54
3
60000
180000
... More
Supply of PC based portable maintenance console(Laptop) .[inspection by Consignee].
2
84500
169000
... More
Preparation of Cable Route Plan, Cable Core Plan, Cable Termination Rack Particulars, Location Box Particulars, Power Supply Diagram, Track Circuit Bonding Diagram and/or any other drawing on Auto- CAD in A2/A3/ A4, etc. size (as per instructions of Engineer in-charge). Initially Contractor shall submit 2 sets of 'AS PLANNED' documents complete for approval of Railways. One set is returned either duly approved for making a fair copy or for re-submission for approval after 55 incorporating the changes as required by railways. After preliminary approval, execution of work shall be carried out at site. After Completion of work, 2 sets of 'AS MADE' Check Prints are submitted for Administrative approval. Railways will return one set to the contractor duly approved with alterations/corrections if any. The contractor shall incorporate Railways alterations/corrections in the tracings without any deviation and submit all tracings complete in all respect along with its soft copies in USB Pen Drive and 6 sets of final completion drawings in properly bound booklets. [For Centralized Electronic Interlocking Stations/Small Stations] 56
5
98035
490175
... More
Supply of Final AS MADE documents for EI station
2
200000
400000
... More
Design of circuit diagram for Mid-section LC gates including alteration to the existing 57 station circuit, Signalling plan & TOC a. Preparation of negatives b. Printing of 8 sets of LC gates circuit diagrams & station in blue prints with binding including location particulars. c. Supply of softcopies of LC gate CAD circuits.
3
40000
120000
... More
Arranging skilled labours at S&T/Proj/Stores at UBL for Loading / Unloading / Stacking of departmental materials
180
700
126000
... More
Fixing of relay bases on relay frames erected in the relay room/ location boxes, wiring 59 of all types of relays by drawing various sizes of wires/multi core cable, fixing fuses, condensers, resistance LEDs etc. and wiring duly soldering the same as per the approved circuit diagram, testing point to point before soldering and after soldering bunching and lacing asper the technical spec. (Inspection - Consignee) 60
350
350
122500
... More
Supply of Hylam Sheet 2400mmx 1200mm of 6 mm thick. (Inspection -Consignee).
25
8000
200000
... More
Supply of hylem sheet resin bonded grade P3 to suit IS specification IS: 2036 of 1974 or latest and size 2400mm X 1200mm X10mm of colour approved by site incharge to suit & 'K' rack. (Inspection -Consignee).
5
8000
40000
... More
"Supply and fixing of retro reflective type Calling on/STOP/BSLB/BPAC/Uninsulated trolley prohibited boards as per practice & SEM (Rails will be supplied by Railways)".[inspection by Consignee].
5
6000
30000
... More
Painting the S&T gadgets with standard quality of different colours of paints at various locations as per the instructions of JE/SE/SSE in charge of site.[inspection by Consignee].
500
301
150500
... More
Painting of the cable termination, wiring, equipment, Relay particular and numbering all location box/battery boxes/signal units/gate lodges/Relay room ,panel etc.[inspection by Consignee].
-
-
64
... More
Supply of paint and painting of sliding boom type barrier of LC gate with metallic paint similar to Asian paint or better.[inspection by Consignee].
5
10761
53805
... More
Supply of digital insulation tester mode D266MOTWANE make or better with test probe &cell, battery.[inspection by Consignee].
5
6500
32500
... More
Supply of Digital multimeter with true RMS value18S IR Rish make approved by RDSO. [inspection by Consignee].
10
16000
160000
... More
Supply of clamp meter MOTWANE make model DCM30 or similar with accessories one set of test probes, operating panel and carrying case.[inspection by Consignee]. 69
10
6500
65000
... More
Supply of Earth Resistance Tester 1000 ohms with rechargeable battery and kit for earth resistance similar to SIGMA make or better. [inspection by Consignee].
5
13000
65000
... More
Supply of 60 core 0.6mm indoor hook up cable for data logger wiring procured from RDSO approved firm .[inspection by Consignee].
0.5
-
100000
... More
Manufacture and supply of "L" type bolt of size dia 3/4" and length of 20" with one bend up to 3"length and other end threading up to3"of thread pitch 2.5mm with suitable nut to suit thread with plain washer and spring washer of 3/4" size.[inspection by Consignee].
240
315
75600
... More
Strengthening of foundations of LBs/Signals Full/Half location boxes by carrying out the 73 earth work around the foundation, ramming of the earth carrying out masonry work from bottom of earth work using country stones and cement masonry to prevent the earth from slipping down the bank
30
5900
177000
... More
Supply of communication and other accessories for Datalogger. (d) Supply of 200 way tag block as per specification IRS: S 77/2006 Rev. 1.0 or latest and DRG. No. SA 24751 or latest [Inspection - Consignee]. 75
4
2500
10000
... More
Supply of QBCA1 relay.[inspection by RDSO].
10
6000
60000
... More
Supply of LED holders with LED size 5mm and 1Wtt resistance with different values. [inspection by Consignee].
150
25
3750
... More
Supply of PPTCo efficient device(self re setting type) DCV OF 1.1 AMP S capacity linked with red wire with crimping pin type lugs suitable for 16/02 copper wire leads make: fuzice or better( PPTC Fuses).[inspection by Consignee].
50
25
1250
... More
Supply of Printed & bounded registers including maintenance registers for point machines, track circuits, etc (100 pages each of 75 GSM paper) as per requirement of site in charge. [inspection by Consignee]. 79
25
250
6250
... More
Cable Armour earthing and soldering as instructed by in charge at site. 80
500
70
35000
... More
Supply of Hydrometer.[inspection by Consignee].
25
250
6250
... More
Fabrication, supply and fixing to aluminium ladder arrangement for drawing various wires in the battery, equipment and relay room (Inspection - Consignee).
100
900
90000
... More
"Termination of main, tail, signalling and power cables and internal wiring on terminal/fuse blocks in cable termination Rack at relay room. The work includes fixing of all new cables by teakwood clamp on teakwood base plank, fixing of Hylem sheet 10mm thick for terminal board, varnishing all teakwood items, fixing of terminals/ fuse blocks on the terminal board, drilling of necessary holes, termination of cables, wiring, identification of cables using aluminium tags with letters punched neatly, as per approved.
-
-
82
... More
Termination of main, tail, Signalling and power cables and internal wiring on terminal/ fuse blocks in cable termination Rack at relay room. The work includes fixing of all new cables by teakwood clamp on teakwood base plank, fixing of Hylem sheet 10 mm thick for terminal board, varnishing all teakwood items, fixing of terminals/ fuse blocks on the terminal board, drilling of necessary holes, termination of cables, wiring, identification of cables using aluminium tags with 83 letters punched neatly, as per approved circuit diagram and cable plan, painting of particulars on sleeves. After terminations are over, cable entry at the bottom shall be closed with, cement plastered, the interspace filled with sand up to base level and the bottom surface shall be sealed with sealing compound. Cable armour to be soldered to earth.(Supply of cable termination racks is not included in this schedule). [All bolts and nuts with washers, Hylum Sheet 10 mm Thick, cement, sand, stone jelly, Teak wood base , paints and all other miscellaneous materials required for the work shall be supplied by the contractor]a. Termination on 25/60mm PBT terminals"(Per unit=Per terminal). 84
1500
130
195000
... More
Supply of 13mm Drilling machine heavy duty. (Inspection -Consignee). 85
5
8700
43500
... More
Supply of 13mm Drilling machine low. (Inspection -Consignee).
5
6700
33500
... More
A3 Multifunction Laser colour printer with Automatic document feeder. Xerox Versalink C7020 + 2 trays with 2 years warranty or similar make.(Inspection -Consignee). 87
1
264000
264000
... More
Recording of cable trench and copying in DVD/CD 88
15
3250
48750
... More
Supply of Chair for Maintainer Room. (Inspection -Consignee). 89
10
11200
112000
... More
Supply of Steel table with storage on both sides .[inspection by Consignee]. 90
5
21770
108850
... More
Navtal locks Godrej make or similar 75mm with 2 keys.[inspection by Consignee].
20
670
13400
... More
DSR 2021
-
-
5114451.35
... More
DSR 2021
-
-
1593528.75
... More
25mm gap 'in-situ' welding during traffic block using Railway's welding portion & Welder and finishing of weld to meet the prescribed tolerances and pass all stipulated tests with all required labour, materials, consumables, tools, equipment etc. to complete the work in all respect as per IR's "Manual for Fusion Welding of Rails by Alumino - Thermic Process" with latest correction slips, including marking of welded joint, painting weld collar with anticorrosive paint, restoration of track near weld joint to original position and fixing of joggled fish plate at new weld, to be removed after passing o f weld in USFD test as directed by Engineer in charge. Note: 1. Only welding portion and related accessories as per Annexure - I and Welder shall be supplied by Railways. 2. Hydraulic Weld trimmer shall be used for chipping and profile Grinder for finishing. 3. Required nos. of Joggled fish plates shall be supplied by Railway at nearest P.Way Stores and the same shall be returned at nearest P. Way Store o r a t other location as per direction of Engineer-in-Charge after release from track.
-
-
1
... More
Dismantling and removing rail of all section & length from track, laid on any type & 2 density of sleeper by removing fish plates, fastenings & fish bolts and other materials including stacking all released materials within an average distance of 500 metres as directed by Engineer in- charge. Note: 1.Cutting of rails shall be paid separately. 2.Work to be done under traffic block. For Casual/Scattered Rail Renewal work
91
32
2939.3
... More
Boxing and profiling of ballast as per procedure prescribed in latest edition of IRPWM 3 including cess dressing on both sides of track. The work will include removing excess ballast from track and putting the same in crib and shoulder by leading to a maximum of 50m including crossing of track, de-weeding on ballast section etc and as directed by Engineer-In charge.
350
23
8340.5
... More
First or Second Through Packing of track of all sleeper density including giving a 4 general lift, as desired to eliminate sag after Deep Screening work, lifting of track, lowering of track and major realignment of curves and formation rehabilitation as per procedure prescribed in latest edition of IRPWM. Note: General lift is normally 25 mm and isolated lift may be up to 50 mm. For PSC Sleeper Track with Sleeper Density of 1660
350
124
43697.5
... More
Replacing existing glued joint rail with cut rails or with glued joint rail or insertion of glued joint by cutting existing track under traffic condition by cutting rails, re-fixing with all rail 5 sleeper fastenings and providing required gaps for carrying out welding as an alternative to drilling holes or joining rails with fish plates duly drilling holes as required including stacking of released material and as directed by engineer in-charge. Note: (1) Drilling holes & rail cutting will be paid separately. (2) Transportation of materials to the site of work from supply points, if more than 250m, shall be paid separately.
48
1647
79067.52
... More
Painting 2 coats to various P. Way Reference Post, Structures etc. with enamel paint of approved make with 2 coats of different colours & letters, as directed by Engineer in-charge. Level Crossing Boards including Road Sign Boards
5
176
882.35
... More
Painting 2 coats to various P. Way Reference Post, Structures etc. with enamel paint of approved make with 2 coats of different colours & letters, as directed by Engineer in-charge. Level Crossing Post
5
174
872.15
... More
Quick cutting with abrasive rail cutter of all types of rail sections including wear resistant, head hardened rails up to 110 UTS, with contractor's tools & plants, equipment, consumable 8 with all lead & lift etc. complete as directed by Engineer in-charge. Abrasive Rail Cutter will be as per RDSO Specification No. TM/SM/1 (Rev. 01 of 2012) with latest status of RDSO; Rail Cutting Wheel Abrasive Disc will be as per RDSO Specification No.TM/SM/2 (Rev. 01 of 2020) 60 Kg - 110/90UTS- On Running Line
144
295
42602.4
... More
Drilling holes of 16 mm to 32 mm dia. with Rail Drilling machine including chamfering 9 with appropriate chamfering tools in all types of rail section with contractor's tools & plants, equipment, consumable with all lead & lift etc. complete, as directed by Engineer in-charge. Rail Drilling Machine will be as per RDSO Specification No. TM/SM/3, dated 24.04.1991. Outside Track
87
51
4458.75
... More
Drilling holes of 16 mm to 32 mm dia. with Rail Drilling machine including chamfering 10 with appropriate chamfering tools in all types of rail section with contractor's tools & plants, equipment, consumable with all lead & lift etc. complete, as directed by Engineer in-charge. Rail Drilling Machine will be as per RDSO Specification No. TM/SM/3, dated 24.04.1991. On Running Line
778
66
51550.28
... More
Loading, leading and unloading of all types ofP. Way fittings and all other miscellaneous material except Rails, sleepers, switches, crossings, SEJs and Glued Joints by road vehicles for different leads. Note: Lead shall be the shortest motor able road length between the points of loading and unloading. Lead up to 5 Km
-
-
11
... More
Loading, leading and unloading of all types ofP. Way fittings and all other 12 miscellaneous material except Rails, sleepers, switches, crossings, SEJs and Glued Joints by road vehicles for different leads. Note: Lead shall be the shortest motor able road length between the points of loading and unloading. Lead beyond 5 Km and up to 10 km
1
192
192.87
... More
Loading, leading and unloading of all types ofP. Way fittings and all other 13 miscellaneous material except Rails, sleepers, switches, crossings, SEJs and Glued Joints by road vehicles for different leads. Note: Lead shall be the shortest motor able road length between the points of loading and unloading. Lead beyond 10 Km and up to 20 km
1
246
246.67
... More
Loading, leading and unloading of all types ofP. Way fittings and all other 14 miscellaneous material except Rails, sleepers, switches, crossings, SEJs and Glued Joints by road vehicles for different leads. Note: Lead shall be the shortest motor able road length between the points of loading and unloading. Lead beyond 20 Km and up to 30 km
1
312
312.4
... More
Loading, leading and unloading of all types ofP. Way fittings and all other 15 miscellaneous material except Rails, sleepers, switches, crossings, SEJs and Glued Joints by road vehicles for different leads. Note: Lead shall be the shortest motor able road length between the points of loading and unloading. Lead beyond 30 Km and up to 50 km
1
403
403.95
... More
Loading, leading and unloading of all types ofP. Way fittings and all other 16 miscellaneous material except Rails, sleepers, switches, crossings, SEJs and Glued Joints by road vehicles for different leads. Note: Lead shall be the shortest motor able road length between the points of loading and unloading. Lead beyond 50 Km and up to 100 Km
1
603
603.88
... More
Loading, leading and unloading of all types ofP. Way fittings and all other 17 miscellaneous material except Rails, sleepers, switches, crossings, SEJs and Glued Joints by road vehicles for different leads. Note: Lead shall be the shortest motor able road length between the points of loading and unloading. Lead beyond 100 Km and up to 150 Km
1
902
902.74
... More
Loading, leading and unloading of all types ofP. Way fittings and all other 18 miscellaneous material except Rails, sleepers, switches, crossings, SEJs and Glued Joints by road vehicles for different leads. Note: Lead shall be the shortest motor able road length between the points of loading and unloading. Extra for every Km per MT beyond 150 Km over item no. 172047
7
3
21.35
... More
Transportation of Rails, sleepers, switches, crossings, SEJs and Glued Joints by road 19 vehicles for different leads. Note: 1. Lead shall be the shortest motorable road length between the points of loading and unloading. 2. Loading and unloading shall be paid extra under relevant items. Lead up to 5 Km
1
49
49.56
... More
Transportation of Rails, sleepers, switches, crossings, SEJs and Glued Joints by road 20 vehicles for different leads. Note: 1. Lead shall be the shortest motorable road length between the points of loading and unloading. 2. Loading and unloading shall be paid extra under relevant items. Lead beyond 5 Km and up to 10 km
1
88
88.96
... More
Transportation of Rails, sleepers, switches, crossings, SEJs and Glued Joints by road 21 vehicles for different leads. Note: 1. Lead shall be the shortest motorable road length between the points of loading and unloading. 2. Loading and unloading shall be paid extra under relevant items. Lead beyond 10 Km and up to 20 km
1
142
142.75
... More
Transportation of Rails, sleepers, switches, crossings, SEJs and Glued Joints by road 22 vehicles for different leads. Note: 1. Lead shall be the shortest motorable road length between the points of loading and unloading. 2. Loading and unloading shall be paid extra under relevant items. Lead beyond 20 Km and up to 30 km
1
208
208.48
... More
Transportation of Rails, sleepers, switches, crossings, SEJs and Glued Joints by road 23 vehicles for different leads. Note: 1. Lead shall be the shortest motorable road length between the points of loading and unloading. 2. Loading and unloading shall be paid extra under relevant items. Lead beyond 30 Km and up to 50 km
1
300
300.03
... More
Transportation of Rails, sleepers, switches, crossings, SEJs and Glued Joints by road 24 vehicles for different leads. Note: 1. Lead shall be the shortest motorable road length between the points of loading and unloading. 2. Loading and unloading shall be paid extra under relevant items. Lead beyond 50 Km and up to 100 Km
1
499
499.96
... More
Transportation of Rails, sleepers, switches, crossings, SEJs and Glued Joints by road 25 vehicles for different leads. Note: 1. Lead shall be the shortest motorable road length between the points of loading and unloading. 2. Loading and unloading shall be paid extra under relevant items. Lead beyond 100 Km and up to 150 Km
14
798
11183.48
... More
Transportation of Rails, sleepers, switches, crossings, SEJs and Glued Joints by road 26 vehicles for different leads. Note: 1. Lead shall be the shortest motorable road length between the points of loading and unloading. 2. Loading and unloading shall be paid extra under relevant items. Extra for every Km per MT beyond 150 Km over item no. 172057
20
3
61
... More
Collection, segregation and stacking of various scattered P.Way materials at 27 nominated stacking location with serviceable and un- serviceable ones separately within a lead up to 500 metre and lift up to 5 metre including crossing of track(s) wherever necessary as directed by Engineer-in-Charge. Rails, switches, crossings, SEJ, Glued Joints, Check Rails etc.
5
332
1664.9
... More
Collection, segregation and stacking of various scattered P.Way materials at 28 nominated stacking location with serviceable and un- serviceable ones separately within a lead up to 500 metre and lift up to 5 metre including crossing of track(s) wherever necessary as directed by Engineer-in-Charge. P.Way fittings of all types and other similar loose items
5
350
1753.05
... More
Manufacturing and Supply of Alumino thermic welding portions of 52Kg/60 Kg/60EI- R260 as approved by RDSO for welding of rails 52Kg/60Kg/60EI-R260 kg for 25mm gap by the process of AT welding along with complete accessories confirming to the specification laid down in Indian 1 Railway Standard specification No.IRST-19-2020 up to date correction slips with Single shot crucible fitted with Automatic Tapping Thimble, 3 pieces pre-fabricated mould (Zircon washed) manually pressed using compressed air petrol/LPG pre heating for execution of welding of rail joint as directed by the engineer in charge at site. Note: 1. The accessories along with welding portion shall be supplied as per Annexure-I of the IRUSSOR - 2021. 2. Rate is inclusive of transportation of above to SSE/P. Way stores. For 60Kg/60EI- R260 rails
144
2085
300248.64
... More
Excavation in trenches in any kind of soil of required width for LT UG cables, including excavation for joints, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting 1 out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m. Note: The depth for laying of LT cable shall not be less than 80 cms from the surface to the top of the cable.
766.67
201
154775.34
... More
Supply and laying of high density polyethylene pipe (HDPE pipe) of size 110 mm nominal dia, category of PE-80, PN-6 along with accessories (T joint / straight coupler etc.), ISI marked for drawing LT cables all as per detailed technical specifications of tender documents.
700
370
259231
... More
Supply and laying of high density polyethylene pipe (HDPE pipe) of size 50 mm nominal dia, category of PE-80, PN-6 along with accessories (T joint / straight coupler etc.), ISI marked for drawing LT cables all as per detailed technical specifications of tender documents.
1600
61
97664
... More
Transportation, Laying, testing and commissioning of LTUG cable 4cx16 / 4cx25 / 4 4cx35 / 4cx50 sqmm as per specification. Note:- LT UG cable will be issued by Railways. The contractor will be responsible for collection of cables from the Elect Maintenance / Works Depot including loading, unloading, transportation and return of un-used cables back at Depot. Costs of these provisions are deemed to be included in the quoted rates.
1600
17
27680
... More
Transportation, Laying, testing and commissioning of LTUG cable 4c x 70sqmm as per 5 specification. Note:- LT UG cable will be issued by Railways. The contractor will be responsible for collection of cables from the Elect Maintenance / Works Depot including loading, unloading, transportation and return of un-used cables back at Depot. Costs of these provisions are deemed to be included in the quoted rates.
700
20
14000
... More
Supply and making water / moisture proof end termination with brass double compression gland and aluminium lugs for 4 x 70 sqmm size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade all as specified and directed.
10
468
4680
... More
Supply and making water / moisture proof end termination with brass double compression gland and aluminium lugs for 4 x 25 sqmm size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade all as specified and directed.
20
315
6300
... More
Material and labour for Trenchless cutting to cross the cable across the track / road 8 duly supply and provided with HDPE pipe of size 160 mm (OD) of PE 80, PN- 6 category to pull HTUG/LTUG cable as per instruction of Eng.-in-charge (Rates includes cost of trenchless cutting, cost of pipe and laying of pipe, but laying charge of cable is not included).
150
1716
257475
... More
Supply, fixing, Installation, Connection, and commissioning of Automatic supply change 9 over switch colour light signalling panels, 60 Amps for 3 source single phase supply suitable for 10KVA AT as per RDSO specification No.-TI/SPC/PSI/CLS/0020 with A&C slip no:1 to 4 or latest. Signalling panel should be fixed on the wall / floor with proper grouting as per the site requirement including connection with crimping of cable ends as required under the supervision of site incharge.
5
42000
210000
... More
Supply and fixing of 20 / 22 W, 240 V Batten LED Light Fitting with diffuser and driver including all connected materials as per specification enclosed.
20
740
14800
... More
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 Nos. blades, 30 cm long down rod, 2 Nos. canopies, shackle kit, copper winding, Power Factor not less than 0.9, Service 11 Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control (As per site requirement) and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. including necessary MS hooks as required complete all as per detailed specifications and as directed by Eng.-in-Charge.
5
2730
13650
... More
Supply & fixing of single phase AC 230 V, 50 Hz modular type BLDC Exhaust fan 200 12 mm sweep complete with all accessories such as frame with louvers, necessary mounting arrangements, nuts bolts, fasteners including making suitable openings on walls, finishing the surfaces etc all as specified and directed.
5
2051
10255
... More
Supply and fixing of 70 W, LED flood light fitting on walls / pillars including all necessary fixing arrangements such as clamps, nuts, bolts, 3 core copper flexible connecting wires etc; as per site requirement and as per detailed specification.
5
7390
36950
... More
Supplying and fixing 3 pin, 5 A ceiling rose on the junction box/ wooden block including connections etc. as required.
35
87
3045
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required
30
477
14310
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required
20
586
11720
... More
Wiring for circuit/ sub main wiring along with earth wire with the size of 2 X 1.5 sq. mm 17 + 1 X 1.5 sq. mm earth wire FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit including all necessary connected works such as cutting chases, drilling holes on wall / ceiling etc including plastering / making good the disturbed surfaces all as specified and as directed.
250
233
58250
... More
Wiring for circuit/ sub main wiring along with earth wire with the size of 2 X 2.5 sq. mm 18 + 1 X 2.5 sq. mm earth wire FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit including all necessary connected works such as cutting chases, drilling holes on wall / ceiling etc including plastering / making good the disturbed surfaces all as specified and as directed.
100
275
27500
... More
Material and labour for wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in recessed medium class PVC 19 conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required including all necessary connected works such as cutting chases, drilling holes on wall / ceiling etc including plastering / making good the disturbed surfaces all as specified and as directed.
35
1015
35525
... More
Fabrication, supply and erection of 6 Mtrs long hot dip galvanized octagonal pole with BSEN 10025 grade S355 JO steel plate for shaft, IS 2062 for base plate with door opening 20 arrangements, including suitable boards, Bakelite sheet and MCBs as per IS specifications suitable to withstand the wind speed of 47 m/s for 6 m pole in single section and single joint welded as per IS 9595/IS10178AWS having dimensions bottom 130 mm, top 70 mm with 3 mm thick suitable base plate and 4 Nos foundation bolts, necessary excavation for foundation and refilling all as specified and directed (excluding PCC foundation).
10
10584
105840
... More
Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for outdoor luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete- Single Arm Bracket with 1000 mm Standard 40/50 mm dia.
10
1544
15440
... More
Providing and making steel pole collar with cement concrete (1:3:6) with stone aggregate 20 mm nominal size in foundations of specified size and shape including form work, plastering if required, curing etc as required. (Volume of pole /pipe not to be deducted).
3
8135
24405
... More
Supplying and embedding 40 mm dia GI pipe, medium class, in pole collar / foundation (During casting) for cable entry including bending the pipe to the required shape complete as required. 24
20
589
11780
... More
Supply and fixing of 70 W, LED Street light fitting as per detailed specification.
10
5955
59550
... More
Supplying and drawing 3 x 2.5 sq mm of FRLS PVC insulated copper conductor, single core cable in the existing surface/ PVC conduit as required
70
137
9590
... More
Supplying and fixing 6 way, double door, horizontal type Single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, power painted including earthing etc as required.
5
2206
11030
... More
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, Double pole miniature circuit breaker suitable for inductive load of in the existing MCB DB complete with connections, testing and commissioning etc. as required.
10
656
6560
... More
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, Single pole miniature circuit breaker suitable for inductive load of in the existing MCB DB complete with connections, testing and commissioning etc. as required.
10
256
2560
... More
Earthing arrangements (Pipe earthing) as per detailed technical specification conforming to lS:3043 and as per drawing enclosed with tender specifications.
10
5236
52365.6
... More
Supply, erection, commissioning of10 KVA Auxiliary transformer as per latest RDSO Specification no-ETI/PSI/15(8/03)
10
55000
550000
... More
Erection and supply of Galvanised steel structure other than mast as per RDSO specification No.ETI/OHE/13(4/84) and IS:2062
2
90000
180000
... More
Erection and supply of Galvanised steel structure for Mast , dwarf mast etc. (9.5 mtr length) as per RDSO specNo.ETI/OHE/13(4/84) and IS:2062
-
-
3
... More
Erection and supply of 25KV D.O.Fuse switch complete as per RDSO Spec. No.ETI/PSI/14(1/86)/REV-1/Apr -87 or latest. 5
10
9000
90000
... More
Supply & erection of Anti climbing Device Spec. No.ETI/OHE/SK/106
10
2000
20000
... More
Erection and supply of Post Insulator Spec.No.TI/SPC/OHE/INS/0070(04/2007) with A & C Slip no-1 & 2, RI 6090
45
5000
225000
... More
Supply & erection of Jumper wire, 160 sq.mm (19x7x1.25 mm) as per RDSO Spec. No. ETI/OHE/3(2/94)Rev.1 (4/95) or latest 8
100
700
70000
... More
P.G. Clamp (1030) as per Drg. No.ETI/OHE/ P/1030-3 & or latest
20
270
5400
... More
Erection and supply of 9-T insulator (CD-1050 mm) as per RDSO Spec.No.TI/SPC/OHE/INS/ 0070(4/07) or latest. 10
25
3200
80000
... More
Concrete for foundation 11
40
4500
180000
... More
Supply & fixing of Number Plate. 12
10
451
4510
... More
Drilling of hole for bonding 13
30
45
1350
... More
M.S Flat 40x6mm
0.5
-
36900
... More
Supply of GI pipe 4" dia, Medium gauge 'B' class including fixing with suitable clamp nuts, bolts etc as per requirement (Make-Tata, Jindal &Bansal)
60
500
30000
... More
Provision (Supply and erection) of Earthling station (RI-7021) as perDrg. No. ETI/ OHE/P/ 7020 or latest for Auxiliary Transformer
15
3400
51000
... More
Fixing, connection, testing, commissioning& Supply of cable junction box IP-65 with metric knockouts for cable entry suitable for cable size 16/25 Sq.mm without terminals similar to Cat 16 No.-K9250 of HENSEL with Grommets IP-65 EDK-40- 2 Nos including fixing, cable junction boxes should be fixed on OHE mast with proper clamping arrangement comprising MS flat 32mm and suitable bolts nuts and washers as per the site requirement including connection with crimping of cable ends with suitable size of crimping socket as required under the supervision of site incharge
10
1500
15000
... More
Fixing, connection, testing,commissioning & Supply of Thermoplastic circuit breaker boxes with protective cover, IP65 protection similar to Cat No.-KV7106 of HENSEL, 1row 6modules having 2XM20 knockout search at top and bottom walls - 1nos, alongwith Grommets IP65 M20-4 Nos 17 including supply of single core 10 Sq.mm multistrand cable-6 Meter Circuit breaker boxes should be fixed on OHE mast with proper clamping arrangement comprising MS flat 32mm and suitable bolts nuts and washers asper the site requirement including connection with crimping of cable ends with copper reducing lugs 6Sq.mm (bottleneck type 4 nos. Dowells make) as required under the supervision of site incharge.
10
2200
22000
... More
Cable crossing across railway track/pucca road by boring hole at depth of 01 mtr by using 01(one) nos. 100mm dia GI pipe(mediumgrade) with accessories.GI pipe with accessories will be supplied by the contractor. 19
60
1551
93060
... More
Supply of four pole MCCB 100A cap in weather proof box. 20
10
19812
198120
... More
Erection of 4 pole MCCB 100A cap in weather proof box.
10
1321
13210
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%