Sericulture Department Tender

KSRB 4-1.3: Providing and laying in position plain cement concrete of mix 1:4:8 with OPC cement @ 180 Kgs with 40mm and down size graded granite metal of coarse aggregates @ 0.85 cum and fine aggregates @ 0.57 cum machine mixed, concrete laid in layers not exceeding 15cms thick, well compacted in foundation and plinth including cost of all materials, labour, HOM of machinery, curing complete as per Specification No.etc., with all lead & lift, loading & unloading charges, including cost and conveyance of all materials, equipment, labour charges, hire charges of all machinery, and all other incidental charges, etc., complete as per specification and direction of the Engineer in charge of work.

KSRB 5.2-2 : Providing and constructing granite / trap / basalt size stone masonry in foundation with cement mortar 1:8, stone hammerd dressed in courses not less than 20 cms high, bond stones at two m. apart in each course including cost of materials, labour, curing complete as per specifications. etc., with all lead & lift, loading & unloading charges, including cost and conveyance of all materials, equipment, labour charges, hire charges of all machinery, and all other incidental charges, etc., complete as per specification and direction of the Engineer in charge of work.

KSRB 5.3-3 : Providing and constructing granite / trap / basalt size stone masonry in basement with cement mortar 1:6, edges of stones chistle dressed in courses not less than 15 cms high, bond stones at two m. apart in each course including cost of materials, labour, curing complete as per specificationsetc., with all lead & lift, loading & unloading charges, including cost and conveyance of all materials, equipment, labour charges, hire charges of all machinery, and all other incidental charges, etc., complete as per specification and direction of the Engineer in charge of work.

KSRB 4-1.2 : Providing and laying in position plain cement concrete of Mix 1:3:6 with OPC @ 220kgs, with 40mm and down size graded granite metal coarse aggregates @0.892cum and fine aggregates @ 0.465cum machine mixed, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation including cost of all materials, labour, HOM curing complete as per Specificationetc., with all lead & lift, loading & unloading charges, including cost and conveyance of all materials, equipment, labour charges, hire charges of all machinery, and all other incidental charges, etc., complete as per specification and direction of the Engineer in charge of work.

KSRB 4-6.4 : Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for vertical surface such as walls at any thickness, including attached pilasters, buttresses, plinth and string courses cost of all materials, labour etc., with all lead & lift, loading & unloading charges, including cost and conveyance of all materials, equipment, labour charges, hire charges of all machinery, and all other incidental charges, etc., complete as per specification and direction of the Engineer in charge of work.

KSRB 15.1.1 Providing flush pointing to square rubble, course or uncoursed stone masonry with cement mortar 1:3, 20mm deep, after raking joints to depth of 20mm nicely lining, including cost of materials, labour,curing complete as per specificationsetc., with all lead & lift, loading & unloading charges, including cost and conveyance of all materials, equipment, labour charges, hire charges of all machinery, and all other incidental charges, etc., complete as per specification and direction of the Engineer in charge of work.

Supplying and fixing M.S. Rectangular poles made out of 2 equal angles of 65x65x6 mm welded together and fixed in CC (1:2:4) WITH 2 NOS 16mm dia M.S. hold fast rods each if length 25 cms. Including cost of all materials cutting, bending scaffolding wherever necessary, nicely finishing the welded joints with all lead lifts and as per the directions of the Engineer-in-charge of the work and including providing 2 coats of approved quality paint over one coat of shop painting (excluding cost of earthwork and concrete) etc., with all lead & lift, loading & unloading charges, including cost and conveyance of all materials, equipment, labour charges, hire charges of all machinery, and all other incidental charges, etc., complete as per specification and direction of the Engineer in charge of work.

Providing and fixing M.S. Block pipe of 38mm dia, of heavy guage of 14 including removing the bends, cutting the pipe, and fixing pipe in between the existing two verticle poles (M.S. rectangular poles) and spot welding the chain link with M.S. block pipe including cost of all materials wastage in cutting, and scaffolding wherever necessary etc., complete including two coats of approved quality paint over one coat of shop paint.etc., with all lead & lift, loading & unloading charges, including cost and conveyance of all materials, equipment, labour charges, hire charges of all machinery, and all other incidental charges, etc., complete as per specification and direction of the Engineer in charge of work.

Providing chain link fencing 50mm size of 8 guage properly stretched between rectangular poles and fixed with suitable bolts & nuts, the free ends shall be welded to the pole and block pipe at top and bottom as required including cost of all materials, labour, lead and lifts, cutting, bending wherever necessary, wastage and lapping etc complete as per direction of the Engineer-in-charge of work including two coats of approved quality paint over one coat of shop paint. etc., with all lead & lift, loading & unloading charges, including cost and conveyance of all materials, equipment, labour charges, hire charges of all machinery, and all other incidental charges, etc., complete as per specification and direction of the Engineer in charge of work.

KSRB 2.3 : Filling available excavated earth ( excluding rock ) in sides of foundations upto plinth in layers not exceeding 20 cms. in depth, compacting each deposited layer by ramming after watering with lead upto 50 m. and lift upto 1.5 m. including cost of all labour etc., with all lead & lift, loading & unloading charges, including cost and conveyance of all materials, equipment, labour charges, hire charges of all machinery, and all other incidental charges, etc., complete as per specification and direction of the Engineer in charge of work.

Fabrication supplying and erecting M.S. tubular trusses of all spans as per approved drawing & design with prefabricated steel applications using quality material and are durable, reliable and corrosion and abrasion resistant. Welding shall confirm to latest structural welding code. Quality shall be on various parameters like shape, size, design gauge and polish. The entire trusses is anchored in RCC column by using 4 nos of M.S. anchor bolts at each support with 10mm thick base plate and shoe plate. The work includes cutting, straightening, placing in position of M.S. pipes and welding wherever necessary and applying one coat of redoxide primer coat to all the members including cost of all materials, labour charges, and hire charges of machineries for cutting, welding, grinding and erection equipments, with all lead and lift, transportation, etc., with all lead & lift, loading & unloading charges, including cost and conveyance of all materials, equipment, labour charges, hire charges of all machinery, and all other incidental charges, etc., complete as per specification and direction of the Engineer in charge of work.

KSRRB M800-5.2.Over Head Sign Board : Supply and installation of retro-reflective Over-Head Gantry sign boards made out of cube corner micro prismatic grade sheeting confirming to type XI standards of IRC:67:2012 specification & fixed over 4mm thick Aluminium Composite Panel sheet having minimum 0.30 mm thick aluminium skin on both sides excluding the cost of back support and foundation. .etc., with all lead & lift, loading & unloading charges, including cost and conveyance of all materials, equipment, labour charges, hire charges of all machinery, and all other incidental charges, etc., complete as per specification and direction of the Engineer in charge of work.

Fabricating, providing and erecting in position of M.S. Ornamental security Grill Gate without hot dip using 75x 12mm MS Flat for alround frame work with verticals at the centre and horizontal centre support MS Square of 20 x 20 mm of different heights as shown in the drawing are to be fixed at 16 cms C/C for square bars of full height and at 8cms C/C for bottom rods providing ornamental C1 Designers at the bottom and C1 arrows inthe middle and top. The entire frame work is to be fixed by means of expansion bolts to the brick pillars with necessary drilling holes, the work includes providing two coats of enamel painting over one coat of red lead ready mix primer coat etc., complete cost of labour, painting, erection charges using hoist pulleycranes etc., as per specification and drawings.etc., with all lead & lift, loading & unloading charges, including cost and conveyance of all materials, equipment, labour charges, hire charges of all machinery, and all other incidental charges, etc., complete as per specification and direction of the Engineer in charge of work. MS Square Tube 60X60X5mm

KSRB 15-18.2 : Providing and applying enamel metal paint two coats (excluding priming coat) over new steel or other metal surface brushing to give an even shade after cleaning oil, grease, dirt and other foreign matter,including cost of materials, labour, etc., with all lead & lift, loading & unloading charges, including cost and conveyance of all materials, equipment, labour charges, hire charges of all machinery, and all other incidental charges, etc., complete as per specification and direction of the Engineer in charge of work.