Sericulture Department Tender

KSRRB 300-58: Compaction of original ground with maximum of 6 passes of 8 to 10 tonnes power roller including filling indepression occuring during rolling including cost of all labour, HOM of machinery complete as per specifications. MORTHChapter 3 etc., with all lead & lift, loading & unloading charges, including cost and conveyance of all materials, equipment, labour charges, hire charges of all machinery, and all other incidental charges, etc., complete as per specification and direction of the Engineer in charge of work.

KSRRB M 400-17Providing, laying, spreading and compacting cushed stone aggregates of granite / trap / basalt to wet mix macadam specifications including pre mixing the material with water at OMC in mechanical mix plant carriage of mixed materials by tipper to site, laying in uniform layers with paver in subbase/base course on well prepared surface and compacting with vibratory roller to achieve the desired density complete as per specifications. MORTH Specification No. 406.etc., with all lead & lift, loading & unloading charges, including cost and conveyance of all materials, equipment, labour charges, hire charges of all machinery, and all other incidental charges, etc., complete as per specification and direction of the Engineer in charge of work.

Constructing un-reinforced, plain cement concrete for pavements using Grade concrete M30 over a prepared base with OPC coarse aggregate at 0.69 cum, fine aggregates at 0.46 cum,Coarse and fine aggregate conforming to IS:383-2016, with Superplastizer at 3 lts conforming to IS 9103-2008. mixed in a concrete mixer of not less than 0.6 cum capacity and appropriate weigh batcher as per approved mix design, laid in approved fixed side form work (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the form work as per drawing). & Spreading the concrete with shovels, rackers compacted using needle, screed and plate vibratorand finished with floaters in a continuous operation including provisionof contraction, expansion, construction and longitudinal joints,including groove cutting charges, joint filler, separation membrane of impermiable plastic sheet of 125 micron, sealant primer, joint sealant, admixtures as approved, curing compound, finishing to lines and grades, textured with texturing machine, and curing including cost of all materials, labour,hire charges of machineries,all lead & lift charges etc., complete as per specifications.(with do- with OPC at 360 kg/cum and coarse aggregate 0.69cum, fine aggregate 0.46cum.) .etc. with all lead & lift, loading & unloading charges, including cost and conveyance of all materials, equipment, labour charges, hire charges of all machinery, and all other incidental charges, etc., complete as per specification and direction of the Engineer in charge of work.

Providing and fixing Pre cast solid concrete kerb stones made out of CC 1:2:4 and finished with CM 1:3 plastering and finishing cutting etc., complete. KBS No.5.4 - do - of size 450 x 150 x 500 mm.etc., with all lead & lift, loading & unloading charges, including cost and conveyance of all materials, equipment, labour charges, hire charges of all machinery, and all other incidental charges, etc., complete as per specification and direction of the Engineer in charge of work.

Vaccum de-watering with vaccum pump and suction mat and compaction with skin floater clubbed with floating disc including cost of generator, HOM of Machinery, screed vibratory, power floater, blade and disc etc., with all lead and lift.etc., with all lead & lift, loading & unloading charges, including cost and conveyance of all materials, equipment, labour charges, hire charges of all machinery, and all other incidental charges, etc., complete as per specification and direction of the Engineer in charge of work.

Providing groove cutting for width of 5mm to 10mm and depth 80mm-100mm including cost of cutting machine, generator & HOM of machinery, including cost of blade, coolant etc., including cleaning of groove & providing sand and hot bitumen fillars, and filler metal etc., including cost of conveyance of all materials, labour, lead cost of all other incidental charges as per drawing and as specifications. for concrete pavement.etc., with all lead & lift, loading & unloading charges, including cost and conveyance of all materials, equipment, labour charges, hire charges of all machinery, and all other incidental charges, etc., complete as per specification and direction of the Engineer in charge of work.

KSRB-4-1.6 : Providing and laying in position plain cement concrete of mix 1:2:4 with cement @ 240kgs, with 20mm and down size graded granite metal coarse aggregates @ 0.878cum and fine aggregates @ 0.459cum, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation, plinth and cills, including cost all materials, labour, HOM of machinery, curing complete as per specifications.etc., with all lead & lift, loading & unloading charges, including cost and conveyance of all materials, equipment, labour charges, hire charges of all machinery, and all other incidental charges, etc., complete as per specification and direction of the Engineer in charge of work.

KSRRB M2900-1. Plain cement concrete M10 mix with crushed stone aggregate 40mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing including cost of materials, labour, HOM complete as per specifications. MORTH Specification No. 408etc., with all lead & lift, loading & unloading charges, including cost and conveyance of all materials, equipment, labour charges, hire charges of all machinery, and all other incidental charges, etc., complete as per specification and direction of the Engineer in charge of work.

KSRB 4.2.1: Providing and laying in position reinforced cement concrete of Design mix M25 with OPC cement @ 340 kgs, with 20mm and down size graded granite metal coarse aggregates @ 0.70cum and fine aggregates @ 0.47cum, with super plasticiser @ 3 liters confirming to IS9103-1999 Reaffirmed-2008 at machine mixed, concrete laid in layers not exceeding 15 cms thick, vibrated for all works in foundation for footings, pedastals, retaining walls, return walls, walls (any thickness) including attached pilasters, columnspillars, posts, struts, buttresses, bed blocks, anchor blocks & plinth etc., including cost of all materials, labour, HOM of machinery, curing, complete but excluding cost of reinforcement as per specifications. (Excluding cost of steel, fabrication and finishing charges) Specification No. KBS 4.1, 4.6etc., with all lead & lift, loading & unloading charges, including cost and conveyance of all materials, equipment, labour charges, hire charges of all machinery, and all other incidental charges, etc., complete as per specification and direction of the Engineer in charge of work.

KSRRB M2200-6. Providing T.M.T. steel reinforcement for R.C.C. work including straightening, cutting, bending, hooking, placing in position, lapping and/or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per disign (laps, hooks and wastage shall not be measured and paid) cost of materials, labour, HOM complete as per specification. MORTH Specification No.1600 & 2200TMT Bars Fe 500etc., with all lead & lift, loading & unloading charges, including cost and conveyance of all materials, equipment, labour charges, hire charges of all machinery, and all other incidental charges, etc., complete as per specification and direction of the Engineer in charge of work.

KSRB 4-6.4 : Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for vertical surface such as walls at any thickness, including attached pilasters, buttresses, plinth and string courses cost of all materials, labour complete as per specificaitons. etc., with all lead & lift, loading & unloading charges, including cost and conveyance of all materials, equipment, labour charges, hire charges of all machinery, and all other incidental charges, etc., complete as per specification and direction of the Engineer in charge of work.

Providing and finishing external walls in two coats over one coat of 100% acrylic silicon glazed primer with antifungal paint for top coat of approved brand and shade to give an even shade after thoroughly brooming the surface to remove all dirt and loose powdered material, free from mortar drops and other foreign matter cost of materials, labour, complete as per specifications.etc., with all lead & lift, loading & unloading charges, including cost and conveyance of all materials, equipment, labour charges, hire charges of all machinery, and all other incidental charges, etc., complete as per specification and direction of the Engineer in charge of work.