Rural Drinking Water And Sanitation Department Tender

code04 - Providing and laying in position cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregatesas per relevant IS Codes machine mixed with super plasticisers laid inlayers, well compacted using needle vibrators. The cost includes alllead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing andall other appurtenances required to complete the work sperechnicalspecifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) 2.5.1 M20 Design Mix Using 20 mm nominal size graded crushed coarseaggregate(P-16 , IT-2.5.1) Common SR 23-24Vol-1 RCC Flooring

code05 - Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.(CommonSR2020-21 Page No-7Item No-1.9)VOLUME - 1

code06 - Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete. Itm No 9.17.2 PWD SR 2023-24 VOL 2 of Tile 600x600 mm

code07 - 2.11 Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. c. Sub structure of Bridges (P-18 , IT-2.1.1) c Common SR 23-24Vol-1

code08 - 16.1 External wall insulation with Polyurethane Foam (PUF) slab Providing and fixing polyurethane foam (PUF) slab 40mm thick average with PU slab density 36+/-2 kg/m for external wall insulation including necessary polymerized plaster reinforced with glass fibre mesh, epoxy based bonding adhesive etc., complete. (PWD 2023-24 BSR P.No.161, I-16.1)

code09 - KSRB 7.17 : Providing, fabricating, assembling and fixing in position aluminium doors using following aluminium mat finish or glossy finish, outer frame plain section 101.6x44.45mm thickness 3.18mm, section weight 2.404 kg/m, door shutters vertical section 44.62x44.45mm thickness 3.18mm, section weight 1.505kg/m, top section 47.62x44.45mm thickness 3.00mm, section weight 1.426kg/m bottom section 114.3x44.45 thickness 3.18mm, section weight 2.646kg/m, door central section 49.91x44.45mm thickness 3.00mm, section weight 1.495 kg/m glazing clips 19x17.3x11mm thickness 0.9mm section weight 0.124kg/m; aluminium sections cut to length joint metred cornersgrinded, the shutters pivoted opening arrangement with heavy duty aluminium alloy automatic door closures floor mounted, providing and fixing standard approved accessories, such as aluminium handle for full width or length, tower bolts, lock, pivots: P.V.C. or rubber gasket with 5.5m. thick plain glass for top and bottom panel; aluminium sections treated for removal of any rust and prevention of further rust formation, and coated with greasy materials for non-adherance of mortars or any other sticky materials; the assembled frame fitted with the corner angles, strips and fitted with screws, rawl plugs or teakwood gutties to R.C.C. columns or masonry on sides. beams and flooring in bottom. including cutting, chistling and making good with cement mortar to match the surface; all the frames throughly cleaned free from rust, scale, or dirt including cost of materials, fixtures, labour and HOM of machinery complete as per specifications. using aluminium section powdered coated to a minimum of 60-70 microns with exterior durable pure polyester grade powder of approved quality.( 2018-19 PWD SR ITEM NO 7.17.2)

code10 - KSRB 7.11 : Providing and fixing in position aluminium windows and ventilators as per approved drawings with sliding shutters using three track window frame of size 92x31.75mm bottom section 1.3mm thick, weight 1.07kg/m; sides and top sections 1.3 mm, thick, weight 0.933 kg/m.shutter frame section comprising top and bottom section of size 40mmx18mm, wall thickness 1.25mm. weight 0.417 kg./m. shutter side outer 40mmx18mm. wall thickness 1.25mm. weight 0.417 kg/m, shutter interlock section 40mmx26.7mm wall thickness 1.1 mm. thick, weight 0.469 kg/m, the shutters mounted on nylon rollers with approved quality of fixtures such as aluminium handles tower bolts etc.; providing and fixing 5.5mm. thick plain glass for shutters fitted with rubber beading all aluminium sections including cutting to required length, joints mitred subdividing the frame tenonned and rivetted, in the assembled frame, stiffened with end clips for corners, angles etc., and fixed to the walls, lintels, floor beams/cills as the case may be, with necessary steel screws, raul plugs or teak wood gatties including cutting masonry or concrete and making good the original surface using cement mortar. using aluminium section powdered coated to a minimum of 60-70 microns with exterior durable pure polyester grade powder of approved quality..( 2018-19 PWD SR ITEM NO 7.11.2)

code11 - Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc.complete. Hot finished welded type tubes including cost of materials,labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (PWD R&BSR 2023-24 SR P.No.82, I-11.16.1)

code12 - 13.34 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.Item No:13.34 p.no 123 Vol-2 2023-24 SR

code13 - 13.34B Providing and fixing Duplex grade / 316 grade Stainless Steel water storage loft tank of 1000 L capacity applicable for 500ppm & below TDS built with 6 internal layers of SS 304 grade with cover as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately.Item No:13.34B p.no 123 Vol-2 2023-24 SR

code14 - Water purification plants: Supplying, Installation and Commissioning of automatic Water purification plant (RO+UF) with all accessories piping, product water tank on single phase power supply including cost of material, loading and unloading and as directed by the Engineer in charge. 150LPH;cabin Type Item No:21.1.5 For 21.1.7 For 500 LPH : Cabin Type p.no247 2023-24 SR

code15 - Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63 A three phase 4 wire whole current class-1 Accuracy Energy Meter. (PWD ELE SR 2021-22 P.No.14,I.No.5.35)

code16 - Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour charges and all lift charges, handling charges including encasing the pipe around to a depth not less than 15 cms with gravel or selected earth available from the excavation etc. complete.75mm ( weight of pipe -0.651 kg) Kg/m2: 63mm(weight of pipe -0.465 kg)it no 10.14.1 4 page number 120 common sr 2023-24 vol -5

code17 - Filling available excavated earth (excluding rock) in trenches, plinth, ides of foundations and other similar works etc. in layers not xceeding 20cm in depth, consolidating each deposited layer by ramming andwatering, lead up to 50 m and lift upto 1.5 m.Common SR 2021-22 Item no1.9 Page No 7

code18 - 89 14.01 Supplying heavy guage PVC pipe 25 mm Dia 2 mm thick confirming to IS-2509 with suitable size bends, junction box, adhesive paste etc and fixing using inverted wood plug in case RCC ceiling & RCC Wall stone Structure are rawal plugs in case of brick walls and cement plastering damaged portion using heavy gaauge saddles at an intervel of 700mm using NF Screws (2/1) Itm 14.01) PWD SR 2023-24 VOL 6

code19 - Supplying and flush mounting teak wooden box without front plank, made of not less than 12 mm thick wood, after due groove cutting, finishing with necessary cement plastering complete. 8"x6"x3" (203x152x76mm) PWD ELE SR 2021-22 P.No.2,Chapter-1 I.No.1.6.4) I. Point wiring using class A Materialsa) Short point up to 3Mtr from tapping point to out let via switch

code20 - Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using copper PVC insulated multi strand 2x1.5Sqmm copper wire with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. (PWD ELE SR 2021-22 P.No.2&3, I.No.2.1.1,2.1.2 & 2.1.3) I. Point wiring using class A Materialsa) Short point up to 3Mtr from tapping point to out let via switch

code21 - I. Point wiring using class A Materials b) Medium point above 3Mtr up to 6Mtr from tapping point to out let via switch

code22 - I. Point wiring using class A Materials c) Long point above 6Mtr up to 10Mtr from tapping point to out let via switch

code23 - Supplying 6A flush/projected type socket and 6 amps flush/projected type SP switch either surface/flush mounting in a existing gang box or in a 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required. b) 6Amps 3/5 Way (PWD ELE SR 2021-22 P.No.5,I.No.3.1.2)

code24 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 293.16A One Way Switch (PWD ELE SR 2021-22 P.No.5,I.No.3.6.8)

code25 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS293.16/6 Amps flush type Universal Socket (PWD ELE SR 2021-22 P.No.5,I.No.3.6.11)

code26 - Wiring for lighting/power circuit using one of PVC insulated 1100v grade, multistrand Copper conductor single core cable in open or concealed system of wiring. (PWD ELE SR 2021-22 P.No.3,I.No.2.3.2, 2.3.3, 2.3.5) I. 1.5 sqmm (Copper wire)

code27 - I. 2.5 sqmm (Copper wire)

code28 - I. 6 sqmm (Copper wire)

code29 - Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. (PWD ELE SR 2021-22 P.No.6,I.No.3.14.6)

code30 - Supplying and fixing 65/80 W heavy duty open construction ferromagnetic copper ballast for fluorescent tubes: 65/80W heavy duty open construction erromagnetic copper ballast for fluorescent tubes, Class H Insulated copper wire, Vacuum impregnated high quality with Low loss silicon steel laminationoperated on 240V,50Hz supply with IEC 60920 (Safety) & IEC 60921(Performance). Operating voltage range from 180V to 265V, 50Hz AC power Supply (PWD ELE SR 2021-22 P.No.41,I.No.12.24)

code31 - Supplying and Fixing 50mm class A GI pipe up to 4.5 ms. long with a reducing collar of 50x40mm to which, an extension of 250 mm pipe is fixed for 125 or 250/400 W MV/Sodium vapour street light fitting, using suitable clA, bolts ,nuts, and wiring using suitable capacity wires. (PWD ELE SR 2021-22 P.No.45,I.No.13.3)

code32 - Fixing all types and all capacities of fluorescent /false ceiling /spot light / CFL / LED fittings indoor on the wall/ ceiling /rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clA. On wall/ ceiling / Rafter / Girders (PWD ELE SR 2021-22 P.No.45,I.No.13.7.1)

code33 - Supplying and Fixing........mm dia class A GI pipe bracket upto 2.7 meters long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed for fixing MV/SV/MH/FTL street light fitting of all capacities on rail/RCC/wall/tubular pole, using suitable clA, bolts, nuts and wiring using suitable capacity wires. Using 25mm dia G.I.Pipe (PWD ELE SR 2021-22 P.No.45,I.No.13.2.1)

code34 - Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws. 20"x20"x2.5" (PWD ELE SR 2021-22 P.No.10,I.No.5.6.6)

code35 - Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers etc., complete. 32Amps (PWD ELE SR 2021-22 P.No.10,I.No.5.7.2)

code36 - Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve , indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required. 6-32 A SP, 50-63 A DP Group 'A' (PWD ELE SR 2021-22 P.No.13, I.No.5.17.3 & 5.17.6) 50-63 A D.P.MCB

code37 - 6-32 A S.P.MCB

code38 - Supplying and running of GI strips for grounding connections, using necessary fixing materials as required. GI strip 25x3mm (P.No.55, I.No.7.3.1)

code39 - Supplying of LT UG cable having aluminium conductor PVC insulated, sheathed, galvanised, steel wire/steel tap armoured cable with PVC outer sheathing 1.1 KV class. Class A’ PVC Cable 4 core 16 sqmm (P.No.55, I.No.7.4.4)

code40 - Labour charges for laying of 1.1 KV class UG cable when supplied agency in existing trench GI pipe / stoneware pipe / on wall / on pole as required. In exixting trench/duct. 6 sqmm to 16 sqmm (P.No.69, I.No.7.8.1)

code41 - Digging of trench of 0.6m deep x 0.50 mtr wide refiling the trench to the required ground level and consolidating etc., complete.(As per Civil SR KSRB I-2, P-7) In soil (hard) (P.No.70, I.No.7.9.2)

code42 - Supplying and fixing of class A (medium duty) GI pipe of wall thick ness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV class. 40mm (P.No.70, I.No.7.12.1)

code43 - Supplying and fixing L.T. cast Iron pot heads suitable for 1.1 KV class UG cable filled with necessary bituumen/insulating compound complete with terminals, clamps, bolts, nuts and washers etc. 16 Sqmm ((P.No.70, I.No.7.13.2)

code44 - Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipments on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit … The pit should be filled with equal proprotion of salt and charcoal 150mm alround the pipe to complete depth. The connection from the pipe to the conduit etc, is to be established through GI wire of size as per ISI specification 7.3.3. of IS 732 using 12mm dia bolts, nuts, washers and checknuts etc, the pipe shall have 16 through holes of 122 mm dia. (P.No.55, I.No.7.1)