Rural Drinking Water And Sanitation Department Tender
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
Costs
EMD
₹ 2,00,000Document Cost
Refer DocumentsTender Fee
₹ 2,920
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
RWSSD/2024-25/WT/WORK_INDENT8081/CALL-2Tender No
RWSSD/2024-25/WT/WORK_INDENT8081/CALL-2Tender Authority
Rural Drinking Water And Sanitation Department ViewPurchaser Address
-Website
http://https://jalshakti-ddws.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Others - tender notification copy
BOQ Items
... More
code04 - Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bracing, using sight rails & boning rods at every 100 mm whevere necessary as directed, removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench to the extent required , utilising the available excavated earth locally for the work etc., and all other appurtenances complete in the following strata. complete as per specification and direction of Engineer in charge .
1698.17
194
329444.98
... More
code05 - Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work complete as per specification and direction of Engineer in charge .
1343.9
371
498586.9
... More
code06 - Earth work excavation for pipeline trenches in all kinds of by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bracing, using sight rails & bonding rods at every 100 mm whevere necessary as directed, removal of slumps and other deleterious matter, dressing of sides and levelling the bottom of trench to the extent required , utilising the available excavated earth locally for the work and all other appurtenances to complete complete as per specification and direction of Engineer in charge .
772.27
342
264116.34
... More
code07 - Providing and fixing gauge with iron sheet or enamelled guage plate of 3mm to 4mm thick, 0.23 M width with copper floats indicators and flexible nylone wires, painting figures with approved enamel paint etc. with all lead and lifts, complete for: MS Guage sheet for 2.5 m depth as per specification and direction of Engineer in charge .
2
5486
10972
... More
code08 - Providing and laying 100mm thick pre-cast cover slabs over drains & Rain pit of width not exceeding 800 mm using M20 concrete reinforced with Micro Alloyed High carbon steel with 3mm - 3ply wired steel @ 2.00 kg/m2, slabs jointed in CM 1:3 proportion and nicely finished Including providing holes in the Cover slabs wherever necessary for easy drainage of surface water including of labour, materials, scaffolding, usage of machinery, curing, lead and lift charges etc, Complete. complete as per specification and direction of Engineer in charge . cover slab (600x600) mm
1.28
833
1066.24
... More
code09 - Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications complete as per specification and direction of Engineer in charge .
3.9
940
3666
... More
code10 - Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and complete as per specification and direction of Engineer in charge complete as per specification and direction of Engineer in charge .
7.28
248
1805.44
... More
code11 - Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. Note: Upto 110mm dia Coil shall be used. For Grade PE100 PN6.0 complete as per specification and direction of Engineer in charge . 63mm dia pipe
10020.2
168
1691810.568
... More
code12 - Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. Note: Upto 110mm dia Coil shall be used. For Grade PE100 PN6.0 complete as per specification and direction of Engineer in charge . 75mm dia pipe
2035
213
433577.1
... More
code13 - Providing two coats of water proof cement painting with approved colour and shade over one coat of primer including necessary scaffolding and scrapping of old paint and stain with wire brushes and cleaning of paint stains etc. wherever necessary for old RCC over head tanks with all lead and lifts etc. complete for: Tanks staging above 6 m and upto 9 m Complete as per specifications and as per directions of Engineer-in-charge. staging above 6 m and upto 9 m
626.46
164
102739.44
... More
code14 - Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS- 1865 and of grade GGG 40/50, shaft of stainless steel, wedge fully rubber lined with EDPM seals of NBR and the valves should be vacum tight and 100% leak proof with face to face dimensions as per IS 14846-2000 only. The stem sealing should be with toroidal sealing rings (minimum 2 “ O “ rings). Body and bonut should be coated with Electrostatically applied Epoxy Powder Coating with minimum coating thickness of 250 micron both inside and outside. The rate is inclusive of cost of valves, T.P set, galvanized bolts & nuts and rubber insertions etc. but excluding earth work. (Note: TP set should be considered only for DI pipes estimate. For MS pipes estimates, TP sets cost of corresponding dia shall be deducted from the SR rates of valves and provision for corresponding dia MS flanges should be made in the estimate.) For PN-10: complete as per specification and direction of Engineer in charge .80mm dia for RM, Scour and overflow
3
8013
24039
... More
code15 - Supplying and fixing lightening arrestor with aluminium strip 25mm x 3mm size including finial and grounding, aluminium strip to be embeded in one of the columns in and independent GI conduit of 40mm dia. pipe suitably jointed by collars with all specials with all lead and lifts etc. complete for:For Over Head Tanks upto 9m staging complete as per specification and direction of Engineer in charge .
2
8606
17212
... More
code16 - Supply and delivery of Woltman model with removal mechanism water meters confirming to ISO 4064 part I,II,III class B or IS 779 and IS 2373 with life cycle test certificate from FCRI/ NABLaccredited lab. The water meters shall have magnetic drivers or mechanical drivers and shall beversatile for installation in any position. The meters shall be hydrodynamically, hydrostaticallybalanced. The runner, runner chamber, pointer of the meter shall be as per ISO 4064 class specification. Dry dial excavated counter housing fully protected against flooding ensuring easyreading in all climates. Note: the above rates are basic rates inclusive of transportation charges, earthwork excavation, labour charges, cutting and threading, conveyance, welding and hire charges. complete as per specification and direction of Engineer in charge
2
19451
38902
... More
code17 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, plywood / steel formwork, cost of all materials of quality, labour, Usage charges of machineries, curing and all the other appurtenances required to complete the work as per technical specifications. ( The cost of steel reinforcement shall be paid separately). - PCC 1:2:4 using 40 mm aggregate. as per specification and direction of Engineer in charge .
11.2178
6539
73353.1942
... More
code18 - Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matter, cost of materials, labour complete as per specifications and complete as per specification and direction of Engineer in charge . complete as per specification and direction of Engineer in charge .
20000
3
60000
... More
code19 - Supplying and installation of Class SN8 Double Wall Corrugated HDPE pipe Specials outer wall corrugated and inner wall smooth piping system in accordance with IS 16098 part 2 and conveying to work site and lowering into trenches, laying true to line and level and perfect linking at joints with the help of two “O” rings and a coupler of suitable size, including loading and unloading at both destination including jointing with all labour, all lead and lift including encasing the special around to a depth of not less than 15 cm with screened soft soil available from the excavated soil. The testing commissioning including necessary hydraulic test to the required pressure as per ISS shall be done (the contractor shall have to make his own arrangement for procuring water for testing) complete as per specification and direction of Engineer in charge .] Couplers-(63 mm dia)
34
120
4080
... More
code20 - Supplying and installation of Class SN8 Double Wall Corrugated HDPE pipe Specials outer wall corrugated and inner wall smooth piping system in accordance with IS 16098 part 2 and conveying to work site and lowering into trenches, laying true to line and level and perfect linking at joints with the help of two “O” rings and a coupler of suitable size, including loading and unloading at both destination including jointing with all labour, all lead and lift including encasing the special around to a depth of not less than 15 cm with screened soft soil available from the excavated soil. The testing commissioning including necessary hydraulic test to the required pressure as per ISS shall be done (the contractor shall have to make his own arrangement for procuring water for testing) complete as per specification and direction of Engineer in charge .] Couplers-(75 mm dia)
8
153
1224
... More
code21 - Supplying and installation of Class SN8 Double Wall Corrugated HDPE pipe Specials outer wall corrugated and inner wall smooth piping system in accordance with IS 16098 part 2 and conveying to work site and lowering into trenches, laying true to line and level and perfect linking at joints with the help of two “O” rings and a coupler of suitable size, including loading and unloading at both destination including jointing with all labour, all lead and lift including encasing the special around to a depth of not less than 15 cm with screened soft soil available from the excavated soil. The testing commissioning including necessary hydraulic test to the required pressure as per ISS shall be done (the contractor shall have to make his own arrangement for procuring water for testing) complete as per specification and direction of Engineer in charge .] Tee-(63 mm dia)
24
210
5040
... More
code22 - Supplying and installation of Class SN8 Double Wall Corrugated HDPE pipe Specials outer wall corrugated and inner wall smooth piping system in accordance with IS 16098 part 2 and conveying to work site and lowering into trenches, laying true to line and level and perfect linking at joints with the help of two “O” rings and a coupler of suitable size, including loading and unloading at both destination including jointing with all labour, all lead and lift including encasing the special around to a depth of not less than 15 cm with screened soft soil available from the excavated soil. The testing commissioning including necessary hydraulic test to the required pressure as per ISS shall be done (the contractor shall have to make his own arrangement for procuring water for testing) complete as per specification and direction of Engineer in charge .] Tee-(75 mm dia)
3
306
918
... More
code23 - Supplying and installation of Class SN8 Double Wall Corrugated HDPE pipe Specials outer wall corrugated and inner wall smooth piping system in accordance with IS 16098 part 2 and conveying to work site and lowering into trenches, laying true to line and level and perfect linking at joints with the help of two “O” rings and a coupler of suitable size, including loading and unloading at both destination including jointing with all labour, all lead and lift including encasing the special around to a depth of not less than 15 cm with screened soft soil available from the excavated soil. The testing commissioning including necessary hydraulic test to the required pressure as per ISS shall be done (the contractor shall have to make his own arrangement for procuring water for testing) complete as per specification and direction of Engineer in charge .] Elbow-(63 mm dia)
16
211
3376
... More
code24 - Supplying and installation of Class SN8 Double Wall Corrugated HDPE pipe Specials outer wall corrugated and inner wall smooth piping system in accordance with IS 16098 part 2 and conveying to work site and lowering into trenches, laying true to line and level and perfect linking at joints with the help of two “O” rings and a coupler of suitable size, including loading and unloading at both destination including jointing with all labour, all lead and lift including encasing the special around to a depth of not less than 15 cm with screened soft soil available from the excavated soil. The testing commissioning including necessary hydraulic test to the required pressure as per ISS shall be done (the contractor shall have to make his own arrangement for procuring water for testing) complete as per specification and direction of Engineer in charge .] Elbow-(75 mm dia)
4
246
984
... More
code25 - Supplying and installation of Class SN8 Double Wall Corrugated HDPE pipe Specials outer wall corrugated and inner wall smooth piping system in accordance with IS 16098 part 2 and conveying to work site and lowering into trenches, laying true to line and level and perfect linking at joints with the help of two “O” rings and a coupler of suitable size, including loading and unloading at both destination including jointing with all labour, all lead and lift including encasing the special around to a depth of not less than 15 cm with screened soft soil available from the excavated soil. The testing commissioning including necessary hydraulic test to the required pressure as per ISS shall be done (the contractor shall have to make his own arrangement for procuring water for testing) complete as per specification and direction of Engineer in charge .] 75X63 MM EFR
2
240
480
... More
code26 - 63 mm dia HDPE End Cap with Pipe of 0.2 m length complete as per specification and direction of Engineer in charge . 63 mm dia
52
81
4212
... More
code27 - Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments complete as per specification and direction of Engineer in charge . 65 mm dia
22
1550
34100
... More
code28 - Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments complete as per specification and direction of Engineer in charge . 80 mm dia
2
1740
3480
... More
code29 - Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments complete as per specification and direction of Engineer in charge .80 mm dia gate valve
4
1750
7000
... More
code30 - Providing 80 mm dia Air valve confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any.The valve shall be Supplied with suitable size galvanised bolts and nuts of required numbers as per relevant IS. complete as per specification and direction of Engineer in charge .For Air valve, 80 mm dia
2
2700
5400
... More
code31 - Labour charges for making flanged joints including cost of jointing materials comprising of rubber insertion, bolts and nuts including giving hydraulic test to the required pressure as per ISS with all lead & lift (contractor will make his own arrangement for procuring water for testing). complete as per specification and direction of Engineer in charge .80mm dia
24
119
2856
... More
code32 - Supplying and fixing surface box of required dia. and size with synthetic lid for valves or spindle rods. The surface box should be usable for 50 to 400mm dia. valves, PN 10 / 16 and will consist of lid, housing, locking clip, notched bolt, cross bar, washer and torque nut. complete as per specification and direction of Engineer in charge .
31
3339
103509
... More
code33 - Supplying S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work site, rolling and lowering into trenches, laying true to line and level including loading and unloading at both destinations and jointing of pipes and specials, perfect linking of joints with jack to correct position including cost of jointing materials, i.e, rubber rings conforming to IS: 5382 for S&S RCC pipes, with all leads and lifts as directed and giving necessary hydraulic test as per ISS to the required pressure and commissioning etc. complete. (Contractor will make his own arrangements for procuring water for testing). Before the execution of the work, the contractor shall carry out the survey. complete as per specification and direction of Engineer in charge .
10
1065
10650
... More
code34 - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. complete as per specification and direction of Engineer in charge . WMM
63.93
2394
153048.42
... More
code35 - Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M20 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 m3 capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including construction joints, primer, sealant , curing of concrete slabs for 14- days, and water finishing to lines and grade as per drawing and technical specification clause 1501 with all lead, lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments etc., complete. as per the directions of the Engineer-in-charge of the work. complete as per specification and direction of Engineer in charge .CC Road Surface
253.62
6152
1560270.24
... More
code36 - Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge & MoRTH specification 804
1
9000
9000
... More
code37 - Providing and fixing electro fusion saddle comply with BS EN12201-3:2011, PN-12.5 rating and food grade raw material as per BS 6920 with material of construction PE 80 or PE 100 and colour of fitting- Blue/ Black for wter applications, EF tapping saddle is V-Regarding type. Designed to fuse at a fusion voltage of 40 volt AC. EF tapping saddle shall have moulded SS/Brass metal female threaded outlet. EF tapping saddle is fused by using a top loading piller type pressure exerting 1500N (150 kg approx.) top load on EF saddle. Fusion time is 170 secs and cooling time is 10mins, Exerted pressure shoud be removed after completing the 10 mins cooling time. 63x20, 75x20, 90x20, 110x20, 140x20. complete as per specification and direction of Engineer in charge .63mm dia
687
350
240450
... More
code38 - Pmviding ard fixing 3 layer PP-R (Poly Propylene Rardom Copolymer) pipes confiming to IS.l580l with WRAS and NSF certificares with UV stabilized and anti-micrcbial firsion welded, having thermalal stability for hot and cold water supply, including all PP-R plain and brass threded poly propylene random fittings, including fixing the pipe with clamps at 1.00 m spacing (Excluding Special Fittings). This includes the lot wise test report as per the relevant ISISO/DIN/BIS codes and also testing of joints complete as per diroction of Engineer-ln- Charge. complete as per specification and direction of Engineer in charge .PN - 16 Pipe, SDR 7.4 -20 mm OD
2748
180
494640
... More
code39 - Pmviding ard fixing 3 layer PP-R (Poly Propylene Rardom Copolymer) pipes confiming to IS.l580l with WRAS and NSF certificares with UV stabilized and anti-micrcbial firsion welded, having thermalal stability for hot and cold water supply, including all PP-R plain and brass threded poly propylene random fittings, including fixing the pipe with clamps at 1.00 m spacing (Excluding Special Fittings). This includes the lot wise test report as per the relevant ISISO/DIN/BIS codes and also testing of joints complete as per diroction of Engineer-ln- Charge. complete as per specification and direction of Engineer in charge .25mm dia
1374
227
311898
... More
code40 - Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including testing for water tightness, with all lead and commissioning. (contractor will make his own arrangements for procuring water for testing) For Meadium Duty GI pipe: complete as per specification and direction of Engineer in charge .GI for Encasing under drain
687
336
231209.85
... More
code41 - Flow Control Valve5LPM/10LPM/15LPM : Providing & fixing flow control valve using food grade materials SS 316 ball / 1/2" (15mm) including cost of all materials, labour charges, HOM and testing complete as per of following specification. complete as per specification and direction of Engineer in charge .
687
255
175185
... More
code42 - Supplying and fixing Multijet class B inferential type, AMR compatible water meters with IP 68 protection totalizer confoming to IS 779 with its latest amendments of following size to service connections including conveying and fixing of necessary G.I. specials with appurtenances. complete, with all lead and lift. complete as per specification and direction of Engineer in charge . 20mm dia
687
2645
1817115
... More
code43 - Supply and fixing of HDPE water meter box with locking arrangement to protect the water meter of Class ‘B’ Multijet type of size 15 to 32 mm including HDPE box with base dia 300mm x lid dia 200mm x height 250mm with openable lid and the cover is buried below GL with lid flush with GL including earth work excavation for 600mm x 600mm and base sand filling for 100mm thick over which the cover is placed and enclosed by PCC 1:2:4 using 12-20mm BG jelly for an height of 150mm and refilling with excavated earth for balance 100mm height, disposal of excess earth with all lead and lifts with appurtenances complete as per drawing enclosed. complete as per specification and direction of Engineer in charge . 15 to 32 mm dia
687
509
349683
... More
code44 - supply of PPR Female Threaded Coupling confirming to lS 15801-2008 and DIN Standards 8077 /8092 (B191B) 2nd Memorendum Vide Ref 222 CE Office, complete as per specification and direction of Engineer in charge .20* 1/2 dia
2748
59
162132
... More
code45 - supply of PPR Female Threaded Coupling confirming to lS 15801-2008 and DIN Standards 8077 /8092 (B191B) 2nd Memorendum Vide Ref 222 CE Office, complete as per specification and direction of Engineer in charge .25* 1/2 dia
687
66
45342
... More
code46 - Supply of PPR plain Union confirming to IS 15801-2008 and DIN Standards 8077/8092 (B184A) 2nd Memorendum Vide Ref 222 CE Office, complete as per specification and direction of Engineer in charge .20mm dia
1374
58
79692
... More
code47 - Supply of PPR Gate Valve confirming to IS 15801-2008 and DIN Standards 8077/8092 (B196A) 2nd Memorendum Vide Ref 222 CE Office, complete as per specification and direction of Engineer in charge . 20mm dia
687
378
259686
... More
code48 - Providing and fixing brass bib cock of approved quality complete as per specification and direction of Engineer in charge . 20mm dia nominal Bore
687
345
237015
... More
code49 - Supplying and fixing of RCC demarcation stones of 30 cms x 15 cms and 90 cms deep using 1:2:4 cc and 6 mm dia rods for verticals and stirrups and rendered smooth,including engraving letters "KWB and Arrow" 6mm deep on the top including fixingdemarcation stones 45 cms below ground level and CC 1:3:6, 15 cms height with 8 cms offset around the stone and curing for 10 days including earthwork excavation in all types of soils with all lead and lift . as per specification and direction of Engineer in charge
687
440
302280
... More
code50 - Supply and fixing pot rest slab of size 0.45 x 0.30 x 0.20 meters with central dip for resting the pot including two line dressing and edges rounded and with all lead. as per specification and direction of Engineer in charge
687
513
352431
... More
code51 - Painting Two Coats on New Concrete Surfaces: Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces complete as per specification and direction of Engineer in charge .
370.98
85
31533.3
... More
code52 - Printing New Letter and Figures of any Shade:Printing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade. complete as per specification and direction of Engineer in charge .JJM 2021-22 H NO
51525
1
61830
... More
code53 - Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) complete as per specification and direction of Engineer in charge . Borewell depth of 0-50m
100
347
34700
... More
code54 - Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) complete as per specification and direction of Engineer in charge .Borewell depth of 50-100m
100
442
44200
... More
code55 - Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) complete as per specification and direction of Engineer in charge . Borewell depth of 100-150m
100
456
45600
... More
code56 - Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) complete as per specification and direction of Engineer in charge . Borewell depth of 150-200m
100
536
53600
... More
code57 - Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) complete as per specification and direction of Engineer in charge . Borewell depth of 200-250m
100
634
63400
... More
code58 - Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) complete as per specification and direction of Engineer in charge . Borewell depth of 250-300m
100
700
70000
... More
code59 - Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, material and conforming to IS 1387-1993 and manufactured by basic open hearth electric or basic oxygen process in random length of 5-7m both ends.threaded conforming to IS 554-1985 one end fixed with socket conforming to IS 4270-2001 and the other end with screwed pipes all shall be responsibaly free from defects. The tubes shall be responsible straight end should be with ISI marking weighing 25.10kg/m.prices include Collar-Medium duty. complete as per specification and direction of Engineer in charge .
60
1933
115980
... More
code60 - Supply of 160mm dia bore well cap with clamp set H/D
2
695
1390
... More
code61 - Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications,as per necessary ammendments and instructions of engineer incharge of work. For 17.50 HP - 90 LPM @ 165 m = 15 STG Outlet Dia - 2.00” [WS & UGD Common SR 2021-22 vol-5 Chapter No: 15 Item No: 21.5 pg-161] Pumps (1W)- New Borewell
1
78963
78963
... More
code62 - Supply and delivery of galvanized mild steel tubes of 6mtr standard length heavy duty (C Class) as per IS 1239 (Part-I) 1990 with latest amendments with ISI Mark (one end fitted with Heavy Duty collar and other end fitted with protective cover) complete as per specification and direction of Engineer in charge . 50mm
40
3050
122000
... More
code63 - Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments. 1x3x4 Sqmm complete as per specification and direction of Engineer in charge .
500
165
82500
... More
code64 - Supply, installing,testing and commissioning COMMON control panel consisting of the following Phase Indication Lamp-3 Nos, Fault Indication Lamp-1 No., Digital VAF meter-1 No., On/ Off illuminated push button-2 Nos, including protection for a)over voltage, b)under voltage, c)voltage unbalance, d)over current, e)Dry run, f)Provision to connect float switch, Indoor type 6 to 15HP pumps complete as per specification and direction of Engineer in charge .
1
16500
16500
... More
code65 - Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges,tools and equipments etc., involved in the job as per specifications, with necessary tests as per specifications, with testing of as per instructions of engineer incharge of work. ( CSR-2021-22 Vol-V Page No. 163 Item No.:38)
1
6150
6150
... More
code66 - Supply and laying insulated cable on messenger wire using 2 single core wire for a single phase and stringing PVC insulated and PVC sheathed 650 / 1100 V class aluminium conductor of sizes supported by 3.15mm GI messanger wire with two break insulators, one at each end of the span with suspenders at intervals 0.75m. Each suspender shall be procelain reel insulator of suitable core through which insulated wire passes and this reel insulator shall be fixed to the messenger wire usiing 2mm wire suitable bent and twisted. Separate reel insulator shall be provided for each wire, the messanger wire shall be ded-ended on the clamp provided to the departmentl pole. The work shall also include, supply and fixing short pole, guy set, MS eye bolt and pole support clamp etc. for SINGLE PHASE USING 2 WIRE 10 SQMM. complete as per specification and direction of Engineer in charge .
50
105
5250
... More
code67 - Supplying of 1.1KV LT UG cable XLPE or Heat resistant PVC insulated PVC extruded Inner sheath armoured UG LT cable as per IS-1554(Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5% and resistivity 14 Ohms/Kms (Max) as per IS-3975 complete as per specification and direction of Engineer in charge . 3.5core 35sqmm
20
225
4500
... More
code68 - Labour charges for laying of 1.1KV Class UG cable in existing trench GI Pipe /stoneware pipe/on wall/ on pole as required complete as per specification and direction of Engineer in charge . 25 sqmm to 75 sqmm
20
15
310
... More
code69 - Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc., complete (As per Civil SR KSRB 1-2, P-7) complete as per specification and direction of Engineer in charge .
20
76
1520
... More
code70 - Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc., complete (As per Civil SR KSRB 1-2, P-7) complete as per specification and direction of Engineer in charge .GI Pipe 80mm
6
152
912
... More
code71 - Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc., complete (As per Civil SR KSRB 1-2, P-7) complete as per specification and direction of Engineer in charge .PVC Casing 80mm
20
14
280
... More
code72 - Earthing: Supplying and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of salt and charcoal 150mm around the pipe to complete depth. The connection from the pipe to the conduits etc. is to established through GI wire of sizes as per clause 7.3.3 of IS 732 using 12mm bolts, nuts, washers and check nuts, the pipe shall have 16 through holes of 12mm dia. complete as per specification and direction of Engineer in charge . Pump House
1
3750
3750
... More
code73 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. Thegranite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 ( M10) Using 40 mm nominal size graded crushed coarse aggregates complete as per specification and direction of Engineer in charge .
0.772
5554
4287.688
... More
code74 - Providing Random rubble masonry with hard stone in foundationand plinth including levelling up with cement concrete 1:6:12 (1 cement: 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Providing Size Stone masonry with hard stone in foundation & plinthwith Cement mortar 1:6 (1 cement : 6 coarse sand)complete as per specification and direction of Engineer in charge .
4.6305
5352
24782.436
... More
code75 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) complete as per specification and direction of Engineer in charge .
0.44
5728
2520.32
... More
code76 - RCC hume pipe Circular pump house: Supplying precast RCC Circular Hume pipe pump house with M.S door and RCC conical roof as perspecification and drawings - Internal dia Mtr. 1200 mm & height of 2.5 Mtr. With Wall thickness 65mm complete as per specification and direction of Engineer in charge .
1
16401
16401
... More
code77 - Erection and positioning of RCC Hume pipe pump house/Cisternon size stone masory platform including transportation charges andhandling,finishing with all necessary tools ,plants and materials etc.,complete as directed by the Engineer in charge of the work complete as per specification and direction of Engineer in charge .
1
1882
1882
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%