Rural Drinking Water And Sanitation Department Tender

PWD SR VOL 2-2023-24, P-9, SL no-5.4 - Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

PWD SR VOL 1-2023-24, P-15, SL no-2.1.6 - Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates. As per detailed estimate and as per direction of Engineer incharge of the work.

PWD SR VOL 1-2023-24, P-7, SL no-1.9 - Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. As per detailed estimate and as per direction of Engineer incharge of the work

It No 8.19.1 Page No-44 Volume-02 PWDSR-2023-24 - Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per specifications and as per directions of Engineer-in-charge. As per detailed estimate and as per direction of Engineer incharge of the work.

PWD SR VOL 1-2023-24, P-16, SL no-2.4.2 - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates . As per detailed estimate and as per direction of Engineer incharge of the work.

it no 2.11 a Page No-18 Volumne-01 PWDSR-2023-24 - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.

P.NO.61 .I.NO.9.17.2 PWD SR 2023-24 Volme II - Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 13 (1 cement 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm. As per detailed estimate and as per direction of Engineer incharge of the work.

PWD SR - Electrification charges including BESCOM Deposite as per direction of Engineer in charge( Specifications enclosed separately)

It No 11.16.2 Page No-82 Volume-02 PWD-SR-2023-24 - Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Electric resistance or induction butt welded tubes including cost of materials, labour, usage charges of machinery complete. As per detailed estimate and as per direction of Engineer incharge of the work.

PWD SR VOL 2-2023-24, P-161, SL no-16.3 - External wall insulation with Polyurethane Foam (puf) Spray . Providing and fixing cast in situ polyurethane foam (PUF) spray 50mm thick average with PU foam spray density 35+/-5 kg/m3 for external wall insulation including necessary adhesive etc., complete with all lead and lift, transporation charges, loading unloding charges, all taxes cost of all materials. labour, HOM complete . As per detailed estimate and as per direction of Engineer incharge of the work.50 mm thich for side wall

PWD SR VOL 2-2023-24, P-161, SL no-16.3 - External wall insulation with Polyurethane Foam (puf) Spray . Providing and fixing cast in situ polyurethane foam (PUF) spray 50mm thick average with PU foam spray density 35+/-5 kg/m3 for external wall insulation including necessary adhesive etc., complete with all lead and lift, transporation charges, loading unloding charges, all taxes cost of all materials. labour, HOM complete . As per detailed estimate and as per direction of Engineer incharge of the work. 40mm thick for roofing

PWD SR VOL 2 -2023-24, P-87, It no-11.35.1.2 - Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in- charge. (Glazing, paneling and dash fasteners to be paid for separately):For Fixed Portion: Powder coated aluminium (minimum thickness of powder coating 50 micron) including cost of materials, labour, usage charges of machinery complete as per specifications. As per detailed estimate and as per direction of Engineer incharge of the work

PWD SR VOL 2 -2023-24, P-89, It no-11.37.2 - Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5 mm thickness (weight not less than 12.50 kg/m²) including cost of materials, labour, usage charges of machinery complete. As per detailed estimate and as per direction of Engineer incharge of the work.

CSR-2021-22 Vol-V Page o.247, SOR Y010H Item No1.8 - Water purification plants: Supplying, Installation and Commissioning of automatic Water purification plant (RO+UF) with all accessories piping, product water tank on single phase power supply as per the enclosed detailed Technical Specifications including cost of material, loading and unloading and as directed by the Engineer in charge. As per detailed estimate and as per direction of Engineer incharge of the work

PWD SR VOL 3-2023-24, P-78, It no-8.54 - Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 5mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge & MoRTH specification 804

Quotation approved rates - Operation and maintenance cost of water purification plant for a period of 01 year as per the technical Specifications and as per the directions of the engineer in charge of the work