Rural Drinking Water And Sanitation Department Tender
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
Costs
EMD
₹ 82,980Document Cost
Refer DocumentsTender Fee
₹ 1,040
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
RWSSD/2024-25/WS/WORK_INDENT8160/CALL-2Tender No
RWSSD/2024-25/WS/WORK_INDENT8160/CALL-2Tender Authority
Rural Drinking Water And Sanitation Department ViewPurchaser Address
-Website
http://https://jalshakti-ddws.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
code04 - Supplying HDPE pipes conforming to IS 4984:1995 with latest amendments and conveying to work site including loading and unloading at both destination and rolling, lowering into trenches, laying true to line and jointing of pipes and specials by electrofusion welding, as per standerd procedure and guide lines including encasing the pipe around to a depth not less than 15cms with cleaned soft gravel or selected earth available from the excavation etc., complete giving hydraulic test as per relevant IS Specification with all lead and lift including , testing and commissioning. The rate is exclusive of required specials and fittings etc., complete (Contractor will make his own arrangement for procuring water for testing)Upto 125 mm dia,Coils shall be used. PE100 (PN 6.0 / 6 Kg/cm2) 63mm [BWSSB-V SR 2021-22 Chapter No: 11 Item No: 10.1-10.5]
1480
168
249883.2
... More
code05 - Supplying HDPE pipes conforming to IS 4984:1995 with latest amendments and conveying to work site including loading and unloading at both destination and rolling, lowering into trenches, laying true to line and jointing of pipes and specials by electrofusion welding, as per standerd procedure and guide lines including encasing the pipe around to a depth not less than 15cms with cleaned soft gravel or selected earth available from the excavation etc., complete giving hydraulic test as per relevant IS Specification with all lead and lift including , testing and commissioning. The rate is exclusive of required specials and fittings etc., complete (Contractor will make his own arrangement for procuring water for testing)Upto 125 mm dia,Coils shall be used. PE100 (PN 6.0 / 6 Kg/cm2) 75mm [BWSSB-V SR 2021-22 Chapter No: 11 Item No: 10.1-10.5]
551
213
117396.06
... More
code06 - Supplying HDPE pipes conforming to IS 4984:1995 with latest amendments and conveying to work site including loading and unloading at both destination and rolling, lowering into trenches, laying true to line and jointing of pipes and specials by electrofusion welding, as per standerd procedure and guide lines including encasing the pipe around to a depth not less than 15cms with cleaned soft gravel or selected earth available from the excavation etc., complete giving hydraulic test as per relevant IS Specification with all lead and lift including , testing and commissioning. The rate is exclusive of required specials and fittings etc., complete (Contractor will make his own arrangement for procuring water for testing)Upto 125 mm dia,Coils shall be used. PE100 (PN 6.0 / 6 Kg/cm2) 90mm [BWSSB-V SR 2021-22 Chapter No: 11 Item No: 10.1-10.5]
10
277
2773.8
... More
code07 - Supplying and installation of Class SN8 Double Wall Corrugated HDPE pipe Specials outer wall corrugated and inner wall smooth piping system in accordance with IS 16098 part 2 and conveying to work site and lowering into trenches, laying true to line and level and perfect linking at joints with the help of two “O” rings and a coupler of suitable size, including loading and unloading at both destination including jointing with all labour, all lead and lift including encasing the special around to a depth of not less than 15 cm with screened soft soil available from the excavated soil. The testing commissioning including necessary hydraulic test to the required pressure as per ISS shall be done (the contractor shall have to make his own arrangement for procuring water for testing)ELECTRO FUSION COUPLER 63mm [BWSSB-V SR 2021-22 Chapter No: 11 Item No: 17.1-17.46 Pg No.130]
12
141
1692
... More
code08 - Supplying and installation of Class SN8 Double Wall Corrugated HDPE pipe Specials outer wall corrugated and inner wall smooth piping system in accordance with IS 16098 part 2 and conveying to work site and lowering into trenches, laying true to line and level and perfect linking at joints with the help of two “O” rings and a coupler of suitable size, including loading and unloading at both destination including jointing with all labour, all lead and lift including encasing the special around to a depth of not less than 15 cm with screened soft soil available from the excavated soil. The testing commissioning including necessary hydraulic test to the required pressure as per ISS shall be done (the contractor shall have to make his own arrangement for procuring water for testing)ELECTRO FUSION COUPLER 75mm [BWSSB-V SR 2021-22 Chapter No: 11 Item No: 17.1-17.46 Pg No.130]
4
179
716
... More
code09 - Supplying and installation of Class SN8 Double Wall Corrugated HDPE pipe Specials outer wall corrugated and inner wall smooth piping system in accordance with IS 16098 part 2 and conveying to work site and lowering into trenches, laying true to line and level and perfect linking at joints with the help of two “O” rings and a coupler of suitable size, including loading and unloading at both destination including jointing with all labour, all lead and lift including encasing the special around to a depth of not less than 15 cm with screened soft soil available from the excavated soil. The testing commissioning including necessary hydraulic test to the required pressure as per ISS shall be done (the contractor shall have to make his own arrangement for procuring water for testing) ELECTRO FUSION TEE 63mm [BWSSB-V SR 2021-22 Chapter No: 11 Item No: 17.1-17.46 Pg No.130]
6
246
1476
... More
code10 - Supplying and installation of Class SN8 Double Wall Corrugated HDPE pipe Specials outer wall corrugated and inner wall smooth piping system in accordance with IS 16098 part 2 and conveying to work site and lowering into trenches, laying true to line and level and perfect linking at joints with the help of two “O” rings and a coupler of suitable size, including loading and unloading at both destination including jointing with all labour, all lead and lift including encasing the special around to a depth of not less than 15 cm with screened soft soil available from the excavated soil. The testing commissioning including necessary hydraulic test to the required pressure as per ISS shall be done (the contractor shall have to make his own arrangement for procuring water for testing) ELECTRO FUSION ELBOW 63mm [BWSSB-V SR 2021-22 Chapter No: 11 Item No: 17.1-17.46 Pg No.130]
10
247
2470
... More
code11 - Supplying and installation of Class SN8 Double Wall Corrugated HDPE pipe Specials outer wall corrugated and inner wall smooth piping system in accordance with IS 16098 part 2 and conveying to work site and lowering into trenches, laying true to line and level and perfect linking at joints with the help of two “O” rings and a coupler of suitable size, including loading and unloading at both destination including jointing with all labour, all lead and lift including encasing the special around to a depth of not less than 15 cm with screened soft soil available from the excavated soil. The testing commissioning including necessary hydraulic test to the required pressure as per ISS shall be done (the contractor shall have to make his own arrangement for procuring water for testing) ELECTRO FUSION ELBOW 75mm [BWSSB-V SR 2021-22 Chapter No: 11 Item No: 17.1-17.46 Pg No.130]
6
288
1728
... More
code12 - Supplying and installation of Class SN8 Double Wall Corrugated HDPE pipe Specials outer wall corrugated and inner wall smooth piping system in accordance with IS 16098 part 2 and conveying to work site and lowering into trenches, laying true to line and level and perfect linking at joints with the help of two “O” rings and a coupler of suitable size, including loading and unloading at both destination including jointing with all labour, all lead and lift including encasing the special around to a depth of not less than 15 cm with screened soft soil available from the excavated soil. The testing commissioning including necessary hydraulic test to the required pressure as per ISS shall be done (the contractor shall have to make his own arrangement for procuring water for testing) ELECTRO FUSION REDUCER 75 x 63 mm [BWSSB-V SR 2021-22 Chapter No: 11 Item No: 17.1-17.46 Pg No.130]
2
281
562
... More
code13 - Supplying and installation of Class SN8 Double Wall Corrugated HDPE pipe Specials outer wall corrugated and inner wall smooth piping system in accordance with IS 16098 part 2 and conveying to work site and lowering into trenches, laying true to line and level and perfect linking at joints with the help of two “O” rings and a coupler of suitable size, including loading and unloading at both destination including jointing with all labour, all lead and lift including encasing the special around to a depth of not less than 15 cm with screened soft soil available from the excavated soil. The testing commissioning including necessary hydraulic test to the required pressure as per ISS shall be done (the contractor shall have to make his own arrangement for procuring water for testing) ELECTRO FUSION REDUCER 90 x 75 mm [BWSSB-V SR 2021-22 Chapter No: 11 Item No: 17.1-17.46 Pg No.130]
1
504
504
... More
code14 - Supplying and installation of Class SN8 Double Wall Corrugated HDPE pipe Specials outer wall corrugated and inner wall smooth piping system in accordance with IS 16098 part 2 and conveying to work site and lowering into trenches, laying true to line and level and perfect linking at joints with the help of two “O” rings and a coupler of suitable size, including loading and unloading at both destination including jointing with all labour, all lead and lift including encasing the special around to a depth of not less than 15 cm with screened soft soil available from the excavated soil. The testing commissioning including necessary hydraulic test to the required pressure as per ISS shall be done (the contractor shall have to make his own arrangement for procuring water for testing) END CAP 63mm dia [BWSSB-V SR 2021-22 Chapter No: 11 Item No: 17.1-17.46 Pg No.130]
13
81
1053
... More
code15 - Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including testing for water tightness, with all lead and commissioning. (contractor will make his own arrangements for procuring water for testing) For Medium Duty GI pipe[BWSSB-V SR 2021-22 Chapter No: 13 Item No: 1.1,1.4,Pg No-142]
30
754
22620
... More
code16 - Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments [BWSSB-V SR 2021-22 Chapter No: 15 Item No: 27.3,Pg No-162]
3
1550
4650
... More
code17 - Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS- 1865 and of grade GGG 40/50, shaft of stainless steel, wedge fully rubber lined with EDPM seals of NBR and the valves should be vacum tight and 100% leak proof with face to face dimensions as per IS 14846-2000 only. The stem sealing should be with toroidal sealing rings (minimum 2 “ O “ rings). Body and bonut should be coated with Electrostatically applied Epoxy Powder Coating with minimum coating thickness of 250 micron both inside and outside. The rate is inclusive of cost of valves, T.P set, galvanized bolts & nuts and rubber insertions etc. but excluding earth work. (Note: TP set should be considered only for DI pipes estimate. For MS pipes estimates, TP sets cost of corresponding dia shall be deducted from the SR rates of valves and provision for corresponding dia MS flanges should be made in the estimate.) 80mm dia [BWSSB -V SOR 21-22 P-71 25 B073B,Pg No-72]
3
8013
24039
... More
code18 - Supplying and fixing of fixed height surface box H-4057 MD-KU with PP 40% GF Lid, Housing of PA+, Locking clip of PP with Notched bolt M 12 x 130 hexagon head A2-70 for service connection valves, design derived from DIN 4057, Should be suppied with support tile I (FSL, FSS ,SI) ,Should be able to receive class AA traffic loads [BWSSB-V SR 2021-22 Chapter No: 3 B116A Item No: 52]
6
2731
16386
... More
code19 - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. Cutting in Cement Concrete Road Surface[PWD SR 2021-2022,VOL-3 Item No: 4.27]
22.97
2394
54990.18
... More
code20 - Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge & MoRTH specification 804 [CSR Vol-III 2021-22, Chapter No: 1, Item No: 4 & page No-151 MoRTH 804]
1
9000
9000
... More
code21 - Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M20 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 m3 capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including construction joints, primer, sealant , curing of concrete slabs for 14- days, and water finishing to lines and grade as per drawing and technical specification clause 1501 with all lead, lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments etc., complete. as per the directions of the Engineer-in-charge of the work.[CSR VOL III 2021-22 Item No:20.28 MORTH code 1501 ,Page No-137 ]
68.895
6442
443821.59
... More
code22 - Supply and delivery of Woltman model with removal mechanism water meters confirming to ISO 4064 part I,II,III class B or IS 779 and IS 2373 with life cycle test certificate from FCRI/ NABL accredited lab. The water meters shall have magnetic drivers or mechanical drivers and shall be versatile for installation in any position. The meters shall be hydrodynamically, hydrostatically balanced. The runner, runner chamber, pointer of the meter shall be as per ISO 4064 class B specification. Dry dial excavated counter housing fully protected against flooding ensuring easy reading in all climates. Note: the above rates are basic rates inclusive of transportation charges, earth work excavation, labour charges, cutting and threading, conveyance, welding and hire charges for tools and plants ets., complete (KRDWS&S SOR - 2019-20 , It.No.15.40))
1
25531
25531
... More
code23 - For Cement Concrete road Cutting - Cutting road surfaces for pipeline trenches and disposing of the excavated stuff as directed including barricading, danger lighting etc. in the classifications for: Cutting Cement Concrete Road Surface by Machine cutting to demacrate the trench width of the surface Including cost of all materials, labour, transportation and other incidental charges incur during the execution of work and as per directions of Engineer incharge of work.For 4m road cutting [CSR VOL V 2021-22 Chapter No:2 SOR code A105C, Page No-63 ]
12.825
951
12196.575
... More
code24 - Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work. - In Ordinary Soil.Including cost of all materials, labour, transportation and other incidental charges incur during the execution of work and as per directions of Engineer incharge of work.For 4m road cutting :UNI S0R 2021-22 Chapter No: 1 Item No: 1.6.1]
158.175
371
58682.925
... More
code25 - Providing & fixing electro fusion saddle comply with Bs EN12201 -3:2011, PN-12.5 rating and food grade raw material as per BS 6920 with material of construction PE 80 or PE 100 and colour of fitting - Blue/Black for water applications, EF tappinB saddle is V-Regarding type.Designed to fuse at a fusion voltage of 40 volt Ac. EF tapping saddle shall have moulded SS/Brass metal female threaded outlet. EF tapping saddle is fused by using a top loading piller type pressure exertin8 150ON (150 kg appn.) top load on EF saddle. Fusion tlme is 170 secs and cooling time is 10mins, Exerted pressure shoud be removed after completing the 10 mins cooling time. 63x20,75x20,90x20,110x20,140x20 .Including cost of all materials, labour, transportation and other incidental charges incur during the execution of work and as per directions of Engineer incharge of work.For 20mm connections (2nd Corrigendum - Volume.5 schedule of Rates we.f 7.06.2022, Itno.K210)
95
350
33250
... More
code26 - Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including testing for water tightness, with all lead and commissioning. (contractor will make his own arrangements for procuring water for testing) .Including cost of all materials, labour, transportation and other incidental charges incur during the execution of work and as per directions of Engineer incharge of work. For Heavy Duty - GI pipe 20 mm diameter [CSR VOL V 2021-22Chapter No:13 SOR code N010 B,N010 D Page No-142 ]
285
240
68408.55
... More
code27 - Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including testing for water tightness, with all lead and commissioning. (contractor will make his own arrangements for procuring water for testing) .Including cost of all materials, labour, transportation and other incidental charges incur during the execution of work and as per directions of Engineer incharge of work. For Heavy Duty - GI pipe 32 mm diameter [CSR VOL V 2021-22Chapter No:13 SOR code N010 B,N010 D Page No-142 ]
36
363
13075.92
... More
code28 - Providing wrought mild steel (galvanized) 20 mm dia GI collar confirming to IS 1239-II, 1991 with latest amendments if any..Including cost of all materials, labour, transportation and other incidental charges incur during the execution of work and as per directions of Engineer incharge of work.For 20mm dia GI Collar [CSR VOL V 2021-22Chapter No:13 SOR code N090B Page No-143 ]
95
81
7695
... More
code29 - Supply and delivery at site wrought middle steel (galvanized) 20 mm dia GI elbow confirming to IS 1239- II, 1991 with latest amendments if any. Including cost of all materials, labour, transportation and other incidental charges incur during the execution of work and as per directions of Engineer incharge of work.For 20mm dia GI Elbow [CSR VOL V 2021-22Chapter No:13 SOR code N100B Page No-144 ]
95
81
7695
... More
code30 - Supply and delivery at site GI BEND confirming to IS 1239-II, 1991 with latest amendments if any .Including cost of all materials, labour, transportation and other incidental charges incur during the execution of work and as per directions of Engineer incharge of work.For 20 mm dia GI BEND [CSR VOL V 2021-22 SORcode N110B ,Page No-144 ]
380
100
38000
... More
code31 - Supply and delivery at site wrought middle steel (galvanized) GI union confirming to IS 1239-II, 1991 with latest amendments if any .Including cost of all materials, labour, transportation and other incidental charges incur during the execution of work and as per directions of Engineer incharge of work. For 20 mm dia GI Union [CSR VOL V 2021-22 Chapter No:13 SOR code N150B ,Page No-145 ]
190
106
20140
... More
code32 - Supply and delivery at site wrought middle steel (galvanized) 20 mm dia GI tee confirming to IS 1239-II, 1991 with latest amendments if any.. Including cost of all materials, labour, transportation and other incidental charges incur during the execution of work and as per directions of Engineer incharge of work. For 20 mm dia GI Tee [CSR VOL V 2021-22 Chapter No:13 SOR code N120B ,Page No-144 ]
95
88
8360
... More
code33 - Providing and fixing Flow control valve using food grde materials SS 316 ball / 1/2" [15mm] including cost of all materials, labour charges, HOM and testing complete as per of following specification. The FCV nominal design is for 7ltr/Min Discharge at 0.5 bar pressure loss and should not exceed the flow at range of 15ltr/Min at 1 bar or more pressure.MOC of valve : Food grade stainless steel SS -316 MOC of valve : stainless steel SS -316 flow direction arrow embossed on its outside surface , the valve should act as flow control valve and non return valve. minimum operating pressure - 0.1kg ( 10cm head). designed pressure 1 mtr to 50 mtr. accuracy of valves + 20 % of average flow rate. orifice size : not less than 12 mm. ball size : not less than 12 mm. weight of FCV : not less than 125 gms. length : not less than 70 cm . The FCV is with internal arrangements of very simple passage in line such that the valve will pass the small flaoting particle if any entered in the valve to vaoid choking . The FCV shall be got tested from FCRI by the manfacturer as per the above standards , the quantum of checking to be done from FCRI is th be atatched . The FCV should be fitted on saddle which is fixed on distribution line.Including cost of all materials, labour, transportation and other incidental charges incur during the execution of work and as per directions of Engineer incharge of work. (lst Addendum for Volume-S Schedule of Rates w.e,f 07.06.2022 ,Item no 2,SOR Code B210)[Approved Rate]
95
255
24225
... More
code34 - Providing and fixing chlirinated chloride (CPVC) pipes, having thermal stability for Hot and Cold water supply including all CPVC plain & brass threaded fittings this includes jointing of pipes & fittings with one step CPVC solvent cement, trenching,refilling & testing of joints complete as per direction of Engineers in charge. external work .Including cost of all materials, labour, transportation and other incidental charges incur during the execution of work and as per directions of Engineer incharge of work.20 mm Dia Pipe [Vol-2: SR 2021-22 Sl no 9, Item No: 31.2 ( 1st Corrigendum & addendum order date 21/04/2022)
475
239
113525
... More
code35 - Supplying and fixing Multijet class B inferential type, AMR compatible water meters with IP 68 protection totalizer confoming to IS 779 with its latest amendments of following size to service connections including conveying and fixing of necessary G.I. specials with appurtenances. complete, with all lead and lift. .Including cost of all materials, labour, transportation and other incidental charges incur during the execution of work and as per directions of Engineer incharge of work.For 20 mm dia [CSR VOL V 2021-22 Chapter No:3 SOR code B118B ,Page No-79 ]
95
2645
251275
... More
code36 - Providing and fixing ball valve(brass) of approved quality, high or low pressure with plastic float complete as per specification.20mm nominal bore Including cost of all materials, labour, transportation and other incidental charges incur during the execution of work and as per directions of Engineer incharge of work.20 mm dia [CSR 2021-22 , Vol - 2,Item No: 13.5.2,Page No- 115 ]
95
360
34200
... More
code37 - Providing and fixing ball valve(brass) of approved quality, high or low pressure with plastic float complete as per specification.20mm nominal bore Including cost of all materials, labour, transportation and other incidental charges incur during the execution of work and as per directions of Engineer incharge of work.20mm dia [CSR VOL II 2021-22 ,Item No: 13.2.2,Page No- 115 ]
95
345
32775
... More
code38 - Supply and fixing of HDPE water meter box to protect the water meter of class 'B: multijet type of size 15 to 32mm including HDPE box with base dia 300mmxlid dia 200mmxheight 250mm with openable lid and the cover is buried below GL with lid flush with GL including earthwork excavation for 600mmx600mm and base sand filling for 100mm thick over which the cover is placed and enclosed by PCC 1:2:4 using 12 to 20mm BG jelly for an height of 150mm and refilling with excavated earth for balance 100mm height,disposal of excess earth with all lead and lifts etc complete as per drawing enclosed Including cost of all materials, labour, transportation and other incidental charges incur during the execution of work and as per directions of Engineer incharge of work. [BWSSB-V SR 2021-22 Chapter No: 11 Item No:23]
95
509
48355
... More
code39 - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density..Including cost of all materials, labour, transportation and other incidental charges incur during the execution of work and as per directions of Engineer incharge of work. [CSR VOL III 2021-22 Item No:4.27 MORTH code 406 ,Page No-24 ]
4.275
2394
10234.35
... More
code40 - Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M20 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 m3 capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including construction joints, primer, sealant , curing of concrete slabs for 14- days, and water finishing to lines and grade as per drawing and technical specification clause 1501 with all lead, lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments etc., complete. as per the directions of the Engineer-in-charge of the work..Including cost of all materials, labour, transportation and other incidental charges incur during the execution of work and as per directions of Engineer incharge of work.For CC Road [CSR VOL III 2021-22 Item No:20.28 MORTH code 1501 ,Page No-137 ]
11.97
6442
77110.74
... More
code41 - Supplying at site RCC verticle fountain slab with CC 1:1.5:3 with 20 mm and down size granite jelly with nominal reinforcements as per design plastered with C.M. 1:4, 20 mm thick, with all lead and lift including plank centering, fom work, machine mixing, tamping, curing with appurtenances, Complete as per specifications including cost of steel.Including cost of all materials, labour, transportation and other incidental charges incur during the execution of work and as per directions of Engineer incharge of work. [CSR VOL V 2021-22 Chapter No:3 SOR code B130A ,Page No-80 ]
95
1620
153900
... More
code42 - Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces:.Including cost of all materials, labour, transportation and other incidental charges incur during the execution of work and as per directions of Engineer incharge of work. [CSR VOL III 2021-22 Item No:8.10 MORTH code 803 ,Page No-56 ]
51.3
85
4360.5
... More
code43 - Printing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade. Including cost of all materials, labour, transportation and other incidental charges incur during the execution of work and as per directions of Engineer incharge of work. [CSR VOL III 2021-22 Item No:8.3 MORTH code 801 ,Page No-53 ]
4845
1
5814
... More
code44 - Earth work excavation by manual means for drains,canals, waste weir,draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work.. Including cost of all materials, labour, transportation and other incidental charges incur during the execution of work and as per directions of Engineer incharge of work. In all kinds of soils Depth up to 1.5 m [ CSR 2021-22 ,Vol-I, Chapter No: 1 Item No: 1.4.1]
13.5
186
2511
... More
code45 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Including cost of all materials, labour, transportation and other incidental charges incur during the execution of work and as per directions of Engineer incharge of work. Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates [ CSR Vol-I 2021-22, Chapter No: 2 Item No: 2.1.3]
1.35
5554
7497.9
... More
code46 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, plywood / steel formwork, cost of all materials of quality, labour, Usage charges of machineries, curing and all the other appurtenances required to complete the work as per technical specifications. ( The cost of steel reinforcement shall be paid separately) .Including cost of all materials, labour, transportation and other incidental charges incur during the execution of work and as per directions of Engineer incharge of work.P&L PCC 1:1.5:3 (20mm aggregates) [WS&UW CSR 2021-22, Vol-V,Chapter No:9,ItemNo:1.2,SOR CODE:I030B]
7.41
6550
48535.5
... More
code47 - Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) [CSR 2021-22, Vol-II, Chapter No.11, Item No:11.32][Approved Rate]
0.4446
76387
33961.8825
... More
code48 - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work [CSR 2021-22,Vol-I, Chapter No: 1,Item No: 1.14] In all kinds of soils Depth upto 3 m
22.8188
73
1665.7724
... More
code49 - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work [CSR 2021-22,Vol-I, Chapter No: 1,Item No: 1.14] In ordinary/soft rock without blasting upto 1.5 m depth
9.7795
272
2660.024
... More
code50 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, plywood / steel formwork, cost of all materials of quality, labour, Usage charges of machineries, curing and all the other appurtenances required to complete the work as per technical specifications. ( The cost of steel reinforcement shall be paid separately).PCC 1:2:4 using 40 mm aggregate CSR -V 2021-22 Chapter No:8 Page No:116 Item No: 1.2 (SOR Code:I030A)
1.7379
6539
11364.1281
... More
code51 - Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes , labour, strutting, plywood / steel form work , Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement to be paid separately) (Minimum cement content: 340 kgs (6.80 bags)). RCC M25 Design Mix with 20mm aggregate for footings, rafts and combind footing etc.with smooth finishing the exposed faces in CM 1:4, 12mm thick etc. [WS&UW CSR 2021-22, Vol :V , Chapter No: 8, Item No:2.2, SOR CODE:H020B]
4.9014
9689
47489.6646
... More
code52 - Providing and laying in position Reinforced cement concrete for columns, braces and ring beam above ground level. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes with plastering and smooth finishing the exposed faces in cement mortar 1:3, 12 mm thick, labour,centering, scaffolding, staging, strutting, plywood/ steel form work , Usage charges of machinery, curing and all other appurtenances required to complete the work as per design and technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately). (Minimum cement content: 360 kgs (7.20 bags)). RCC M30 Design Mix with 20mm aggregate for level 6m to 9m height. [WS&UW CSR 2021-22, Vol :V, Chapter No: 8, Item No:3.2, SOR CODE:H030B]
5.4534
15662
85411.1508
... More
code53 - Providing and laying in position Reinforced cement concrete for shell portion, bottom dome / slab and ribs over the staging. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes with plastering and smooth finishing the exposed faces in cement mortar 1:3, 12 mm thick and CM plastering 1:3 proportion 20mm thick for inside with an admixture of water proof compound of requisite proportion of approved quality, labour,centering, scaffolding, staging, strutting, plywood/ steel form work , Usage charges of machinery, curing and all other appurtenances required to complete the work as per design and technical specifications.(Contractor will make his own arrangements for procuring water for testing). (The cost of steel reinforcement, dowel bars to be paid separately). (Minimum cement content: 360 kgs (7.20 bags)). M30 Design Mix with 20mm aggregate for level and 6 to 9 m height. [WS&UW CSR 2021-22, Vol :V, Chapter No:8, Item No:5.2, SOR CODE:H050B]
7.9583
23551
187425.9233
... More
code54 - Providing and laying in position Reinforced cement concrete for side walls of water tank over the staging above the ground level. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes with plastering and smooth finishing the exposed faces in cement mortar 1:3, 12 mm thick and CM plastering 1:3 proportion 20mm thick for inside with an admixture of water proof compound of requisite proportion of approved quality, labour,centering, scaffolding, staging, strutting, plywood/ steel form work , Usage charges of machinery, curing and all other appurtenances required to complete the work as per design and technical specifications.(Contractor will make his own arrangements for procuring water for testing). (The cost of steel reinforcement, dowel bars to be paid separately). (Minimum cement content: 360 kgs (7.20 bags)). RCC M30 Design Mix with 20mm aggregate for level and upto 6 - 9 mheight. [WS&UW CSR 2021-22, Vol :V, Chapter No:8, Item No:6.2,SOR CODE:H060B]
4.8897
24815
121337.9055
... More
code55 - Providing and laying in position Reinforced cement concrete for top dome of water tank over the staging above the ground level. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes with plastering and smooth finishing in cement mortar 1:3, 12 mm thick for both inside and outside surface, labour,centering, scaffolding, staging, strutting, plywood/ steel form work , Usage charges of machinery, curing and all other appurtenances required to complete the work as per design and technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately). (Minimum cement content: 360 kgs (7.20 bags)) RCC M30 Design Mix with 20mm aggregate for level and upto 6-9 m height. [WS&UW CSR 2021-22, Vol :V, Chapter No:8, Item No:7.2,SOR CODE:H070B]
5.3435
24019
128345.5265
... More
code56 - Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) [WS&UW CSR 2021-22, Vol-II,Chapter No.11 Item No:11.32, Page- 84][Approved Rate ]
3.65
76387
278814.375
... More
code57 - Providing and fixing MS ladder between landings, 45 cms wide using angle iron of specified sizes, 20mm MS bars at 25 cms. centre to centre, with necessary supports of same angle iron etc. as directed, including hand railing on both sides with 25mm dia. GI pipes with angle iron props at 2 mtrs. intervals and 0.5M heigh, including fixing in ground with CC 1:2:4 and two coats of anticorrosive bituminous paint etc. with all lead and lifts etc. complete with:[WS&UW CSR 2021-22, Vol :V , Chapter No:8, Item No:11.1,SOR CODE:H110A]
15
4323
64845
... More
code58 - Ladder inside the container: Providing anodized aluminium ladder using 65mm x 32mm x 3.0mm ‘C’ section for ladder side channel x 25mm dia., flutal pipe for Rungs at 250mm c/c ladder fixed at an angle of 70 degrees to horizontal including necessary 25mm dia., G.I. shutters with necessary G.I. fasteners for bracing the ladders to the Tank walls to prevent buckling of the ladder with necessary (M-15) bed for embedding the ladder bottom complete (2nd Addendum for Volume-S Schedule of Rates w.e,f 07.06.2022 ,Item no 2,SOR Code H270)
3.5
5100
17850
... More
code59 - Providing and fixing RCC final and ventilators as per approved design and specifications with form works and protected with wire mesh. The plinth to be of RCC circular pillars and canopy with an ornamental finish at top. The first 22.5 cms height to be covered with RCC panelling as per detailed drawings etc. with all lead and lifts and excluding reinforcement steel. For over head tanks upto 2.5 lakhs capacity. [WS&UW CSR 2021-22, Vol :V, Chapter No:8, Item No:12.1, SOR CODE:H120A]
1
5750
5750
... More
code60 - Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. including painting with anticorrosive approved paint etc. complete including all lead and lifts etc.[WS&UW CSR 2021-22, Vol :V, Chapter No:8, Item No:13, SOR CODE:H140A]
1
2111
2111
... More
code61 - Providing and fixing gauge with iron sheet or enamelled guage plate of 3mm to 4mm thick, 0.23 M width with copper floats indicators and flexible nylone wires, painting figures with approved enamel paint etc. with all lead and lifts, complete - Enamelled guage plate for 2.5m Depth.Including cost of all materials, labour, transportation and other incidental charges incur during the execution of work and as per directions of Engineer incharge of work.[WS&UW CSR 2021-22, Vol :V, Chapter No:8, Item No:14.7, SOR CODE:H150H]
1
3987
3987
... More
code62 - Supplying and fixing DI/CI puddle flanges conforming to IS 7181-1986 with latest ammendments., in position for RCC walls including hoisting and conveying them to work spot with all lead and lifts etc. complete .[WS&UW CSR 2021-22, Vol :V , Chapter No: 8, Item No:15.1, SOR CODE:H160A]
5
1526
7630
... More
code63 - Supplying, Laying and Jointing Cast Iron (CI) double flanged pipes true to line / hoisting of DI flanged pipe in position and aligning to correct plumb, including cost of jointing materials, conveying to work spot with all lead and lifts etc.complete. For double flanged CI pipes of 80mm dia. [WS&UW CSR 2021-22, Vol :V, Chapter No: 8,Item No:16.1,SOR CODE:H170A] 100 mm dia for outlet
66
2205
145530
... More
code64 - Providing 80 mm dia Bell mouthed pipes (flanged) confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete. (RDW&S SR 2019-20 Ch. No. 15, It.no.15.57)
1
320
320
... More
code65 - Suppling Ductile Iron Push on special confirming to IS 9523:2000 - All Double Socket Duck Foot DI Bends:[WS&UW CSR 2021-22, Vol :V, Chapter No: 8, Item No:24.1, SOR CODE:H260A]
4
2365
9460
... More
code66 - Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS 1865 and of grade GGG 40/50, shaft of stainless steel, wedge fully rubber lined with EDPM seals of NBR and the valves should be vacum tight and 100% leak proof with face to face dimensions as per IS 14846-2000 only. The stem sealing should be with toroidal sealing rings (minimum 2 “ O “ rings). Body and bonut should be coated with Electrostatically applied Epoxy Powder Coating with minimum coating thickness of 250 micron both inside and outside. The rate is inclusive of cost of valves, T.P set, galvanized bolts & nuts and rubber insertions etc. but excluding earth work. [WS&UW CSR 2021-22, Vol :V , Chapter No:3, Item No:25.2, SOR CODE:B073B] For Suilce Valve of PN -10.0 and 80mm
1
8013
8013
... More
code67 - Providing two coats of water proof cement painting with approved colour and shade over one coat of primer including scrapping the surface with wire brushes etc. before removal of scaffolding for new RCC over head tanks and cleaning of paint stains wherever necessary with all lead and lifts etc. complete for:: Tanks staging above 6 Mtrs. and upto 9 Mtrs. [WS&UW CSR 2021-22, Vol :V, Chapter No:8, Item No:20.2, SOR CODE:H210B]
273.7282
153
41880.4146
... More
code68 - Providing plastering in CM 1:3 proportion for RCC over head tanks,including smooth finishing,minimum 2% of approved quality water proofingcompound, curing, scaffolding and giving satisfactory water proof testing as per direction etc. complete with all lead lifts etc. for side walls, shell portions, bottom doom, bottom slab and ribs etc. for: 12mm thick for exposed surfaces 6.0 to 9.0 Mtr. staging. [WS&UW CSR 2021-22, Vol :V , Chapter No: 8, Item No:19.2, SOR CODE:H200B]
273.7282
299
81844.7318
... More
code69 - Painting with synthetic enamel paint of approved brand andmanufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in- charge. [PWD & SRB 2021-22 ,Vol : II, Chapter No: 8 Item No: 8.40]
3.75
90
337.5
... More
code70 - Painting new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade complete as per specifications. (“ii) English and Roman [PWD & SRB 2021-22 ,Vol : III, Chapter No: 8 Item No: 8.4]
1000
-
700
... More
code71 - Supplying and fixing lightening arrestor with aluminium strip 25mm x 3mm size including finial and grounding, aluminium strip to be embeded in one of the columns in and independent GI conduit of 40mm dia. pipe suitably jointed by collars with all specials with all lead and lifts etc. complete for: [WS&UW CSR 2021-22, Vol :V, Chapter No: 8, Item No:17.2, SOR CODE:H180B]
1
8606
8606
... More
code72 - Supplying and fixing 40mm dia. GI pipe medium duty pipes hand railing 3 rows fixed to RCC 1:2:4 vibrated post of 150x150mm at bottom and 100x150mm at top, placed at 2 Mtrs. intervals for a height of 750mm including curing, painting GI pipes with two coats of anticorrosive steel paint over a primer coat etc. with all lead lift etc. (The rate per meter is for 3 rows of GI pipes and RCC post) [WS&UW CSR 2021-22, Vol :V , Chapter No: 8, Item No:22,SOR CODE:H230A]
49.6
1098
54460.8
... More
code73 - Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments.[WS&UW CSR 2021-22, Vol-V,Chapter No: 15, Item No: 27.3, SOR code P250C]
1
1750
1750
... More
code74 - Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work.In Hard Soil - Including cost of all materials, labour, transportation and other incidental charges incur during the execution of work and as per directions of Engineer incharge of work.- Depth up to 1.50m CSR VOLUME -1 SR (Page no 6 Item No :1.6.1 )
283.5
371
105178.5
... More
code75 - Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bracing, using sight rails & boning rods at every 100 mm whevere necessary as directed, removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench to the extent required , utilising the available excavated earth locally for the work etc., and all other appurtenances complete in the following strata.In Hard Soil - Including cost of all materials, labour, transportation and other incidental charges incur during the execution of work and as per directions of Engineer incharge of work. - Depth up to 1.50m CSR VOLUME -1 SR (Page no 10 Item No :1.17.1 )
283.5
194
54999
... More
code76 - Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. Note: Upto 110mm dia Coil shall be used..- .Including cost of all materials, labour, transportation and other incidental charges incur during the execution of work and as per directions of Engineer incharge of work.75mm diameter PE100(PN 8.0 / 6 Kg/cm2 (VOLUME - 5 SR Page no 127 Item No :1.2 SOR Code K070B))
1400
185
259000
... More
code77 - Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5 m.Including cost of all labour complete as per specifications..Including cost of all materials, labour, transportation and other incidental charges incur during the execution of work and as per directions of Engineer incharge of work. lead up to 50 m and lift upto 1.5 m CSR VOLUME -1 SR (Page no 7 Item No :1.10 )
283.5
122
34587
... More
code78 - Supply and fixing of Single / Double chamber triple function tamper proof (Both the orifces to be housed in the single chamber) Air valves with Body and cover in Ductile cast iron of grade GGG 40/50. All internal parts such as float, shell with appurtenances., all cover bolts of austenitic alloy / SS 304 steel, DN 50 float of HOSTAFLON / SS 304 and gaskers and seals of EPDM. Epoxy powder coating (EP-P) inside and outside colour blue RAL5005. The valves should be designed for all the three functions i.e., 1. Large orifice for venting of large air volumes on start up. 2. Large orifice for intake of large air volumes. 3. Small orifice for discharge of pressurized air during operation. For PN 10.0 Including cost of all materials, labour, transportation and other incidental charges incur during the execution of work and as per directions of Engineer incharge of work. For TP Air Valve of 50mm dia CSR VOLUME -V Page no 75 Item No : 37.1 SOR Code B085A
1
22942
22942
... More
code79 - 75 MM ELECTRO FUSION COUPLER CSR-2021-22 Vol-V Page No.3 Item No 95
10
153
1530
... More
code80 - 75 MM ELECTRO FUSION ELBOW CSR-2021-22 Vol-V Page No.3 Item No 97
10
246
2460
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%