Rural Drinking Water And Sanitation Department Tender

Common schedule of rates for Engineering departmen - Providing T.M.T steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary compl

rates for Engineering department 2023-24 ,Volume 1 - Providing and removing centering, shuttering, strutting,propping etc., and removal of form work for foundations, footings, bases of columns for mass concrete including cost of all materials, labour complete as per specificaitons.For Foundation works PCC Base Slab

rates for Engineering department 2023-24 ,Volume 1 - Providing and removing centering, shuttering, strutting,propping etc., and removal of form work for foundations, footings, bases of columns for mass concrete including cost of all materials, labour complete as per specificaitons.For Foundation works RCC Base Slab

rates for Engineering department 2023-24 ,Volume 1 - Providing and removing centering, shuttering, strutting,propping etc., and removal of form work for foundations, footings, bases of columns for mass concrete including cost of all materials, labour complete as per specificaitons.For Foundation works RCC Walls

Common schedule of rates for Engineering departmen - Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge

Rate analysis - Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions of the Engineer in- Charge

Common schedule of rates for Engineering departmen - Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for:PVC pipes 110mm dia., 6 kg/sqcm & class 3 110mm dia ( vent pipe & outlet)

Rate Analysis - 110 mm dia perforated sampling pipe

Rate Analysis - 110mm dia perforated pipe

Rate Analysis - Providing and laying of coarse aggregate size as below after washing & sieving to make it free from fines & dust.120-80 mm nominal size (at center)

Rate Analysis - Providing and laying of coarse aggregate size as below after washing & sieving to make it free from fines & dust.40-20 mm nominl size

Rate Analysis - Providing and laying of coarse aggregate size as below after washing & sieving to make it free from fines & dust.20 mm nominl size

Rate Analysis - Providing and laying of coarse aggregate size as below after washing & sieving to make it free from fines & dust.12-10 mm nominal size

Common schedule of rates for Engineering departmen - Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in- charge.