Rural Drinking Water And Sanitation Department Tender
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
Costs
EMD
₹ 1,12,580Document Cost
Refer DocumentsTender Fee
₹ 1,410
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
RWSSD/2024-25/WS/WORK_INDENT8128/CALL-2Tender No
RWSSD/2024-25/WS/WORK_INDENT8128/CALL-2Tender Authority
Rural Drinking Water And Sanitation Department ViewPurchaser Address
-Website
http://https://jalshakti-ddws.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
code04 - Supplying HDPE pipes conforming to IS 4984:1995 with latest amendments and conveying to work site including loading and unloading at both destination and rolling, lowering into trenches, laying true to line and jointing of pipes and specials by electrofusion welding, as per standerd procedure and guide lines including encasing the pipe around to a depth not less than 15cms with cleaned soft gravel or selected earth available from the excavation etc., complete giving hydraulic test as per relevant IS Specification with all lead and lift including , testing and commissioning. The rate is exclusive of required specials and fittings etc., complete (Contractor will make his own arrangement for procuring water for testing)Upto 125 mm dia,Coils shall be used. PE100 (PN 6.0 / 6 Kg/cm2) [BWSSB-V SR 2021-22 Chapter No: 11 Item No: 10.1-10.5] 63mm
4075
163
667485
... More
code05 - Supplying HDPE pipes conforming to IS 4984:1995 with latest amendments and conveying to work site including loading and unloading at both destination and rolling, lowering into trenches, laying true to line and jointing of pipes and specials by electrofusion welding, as per standerd procedure and guide lines including encasing the pipe around to a depth not less than 15cms with cleaned soft gravel or selected earth available from the excavation etc., complete giving hydraulic test as per relevant IS Specification with all lead and lift including , testing and commissioning. The rate is exclusive of required specials and fittings etc., complete (Contractor will make his own arrangement for procuring water for testing)Upto 125 mm dia,Coils shall be used. PE100 (PN 6.0 / 6 Kg/cm2) [BWSSB-V SR 2021-22 Chapter No: 11 Item No: 10.1-10.5] 75 mm
1189
206
245766.3
... More
code06 - Supplying HDPE pipes conforming to IS 4984:1995 with latest amendments and conveying to work site including loading and unloading at both destination and rolling, lowering into trenches, laying true to line and jointing of pipes and specials by electrofusion welding, as per standerd procedure and guide lines including encasing the pipe around to a depth not less than 15cms with cleaned soft gravel or selected earth available from the excavation etc., complete giving hydraulic test as per relevant IS Specification with all lead and lift including , testing and commissioning. The rate is exclusive of required specials and fittings etc., complete (Contractor will make his own arrangement for procuring water for testing)Upto 125 mm dia,Coils shall be used. PE100 (PN 6.0 / 6 Kg/cm2) [BWSSB-V SR 2021-22 Chapter No: 11 Item No: 10.1-10.5] 90 mm
16
269
4305.6
... More
code07 - ELECTRO FUSION COUPLER [BWSSB-V SR 2021-22 Page no 3 ] 63 mm
42
120
5040
... More
code08 - ELECTRO FUSION COUPLER [BWSSB-V SR 2021-22 Page no 3 ] 75 mm
13
153
1989
... More
code09 - ELECTRO FUSION TEE [BWSSB-V SR 2021-22 Page no 3 ] 63mm
10
210
2100
... More
code10 - ELECTRO FUSION TEE [BWSSB-V SR 2021-22 Page no 3 ] 75mm
4
306
1224
... More
code11 - ELECTRO FUSION ELBOW [BWSSB-V SR 2021-22 Page no 3 ] 63mm
5
121
605
... More
code12 - ELECTRO FUSION ELBOW [BWSSB-V SR 2021-22 Page no 3 ] 75mm
10
246
2460
... More
code13 - ELECTRO FUSION REDUCER [BWSSB-V SR 2021-22 Page no 4] 90 x 75 mm
2
504
1008
... More
code14 - ELECTRO FUSION REDUCER [BWSSB-V SR 2021-22 Page no 4] 75 x 63 mm
6
240
1440
... More
code15 - Supplying of Electro fusion End Cap with pipe of 0.2 m length[BWSSB-V SR2021-22 Page no 4] 63mm dia
15
81
1215
... More
code16 - Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including testing for water tightness, with all lead and commissioning. (contractor will make his own arrangements for procuring water for testing) For Medium Duty GI pipe [BWSSB-V SR 2021-22 Chapter No: 13 Item No: 1.1,1.4,Pg No-142]
20
844
16889.6
... More
code17 - Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments [BWSSB-V SR 2021-22 Chapter No: 15 Item No: 27.3,Pg No-162]
25
1550
38750
... More
code18 - Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS- 1865 and of grade GGG 40/50, shaft of stainless steel, wedge fully rubber lined with EDPM seals of NBR and the valves should be vacum tight and 100% leak proof with face to face dimensions as per IS 14846-2000 only. The stem sealing should be with toroidal sealing rings (minimum 2 “ O “ rings). Body and bonut should be coated with Electrostatically applied Epoxy Powder Coating with minimum coating thickness of 250 micron both inside and outside. The rate is inclusive of cost of valves, T.P set, galvanized bolts & nuts and rubber insertions etc. but excluding earth work. (Note: TP set should be considered only for DI pipes estimate. For MS pipes estimates, TP sets cost of corresponding dia shall be deducted from the SR rates of valves and provision for corresponding dia MS flanges should be made in the estimate.) [BWSSB -V SOR 21-22 P-71 25 B073B,Pg No-72] 80mm dia
6
8013
48078
... More
code19 - Supplying and fixing of fixed height surface box H-4057 MD-KU with PP 40% GF Lid, Housing of PA+, Locking clip of PP with Notched bolt M 12 x 130 hexagon head A2-70 for service connection valves, design derived from DIN 4057, Should be suppied with support tile I (FSL, FSS ,SI) ,Should be able to receive class AA traffic loads [BWSSB-V SR 2021-22 Chapter No: 3 B116A Item No: 52]
25
2731
68275
... More
code20 - Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5 m. Including cost of all labour complete as per specifications [CSR 2021-22 VOL-1 Page no 7 item no 1.10]
54
122
6588
... More
code21 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness,well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) (M10) Using 40 mm nominal size graded crushed coarse aggregates.(CSR VOLUME -III SR (Page no A67 Item No :2.1.3 )
215.1
6152
1323295.2
... More
code22 - Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge & MoRTH specification 804 [CSR Vol-III 2021-22, Chapter No: 1, Item No: 4 & page No-151 MoRTH 804]
1
9000
9000
... More
code23 - Supply and delivery of Woltman model with removal mechanism water meters confirming to ISO 4064 part I,II,III class B or IS 779 and IS 2373 with life cycle test certificate from FCRI/ NABL accredited lab. The water meters shall have magnetic drivers or mechanical drivers and shall be versatile for installation in any position. The meters shall be hydrodynamically, hydrostatically balanced. The runner, runner chamber, pointer of the meter shall be as per ISO 4064 class B specification. Dry dial excavated counter housing fully protected against flooding ensuring easy reading in all climates. Note: the above rates are basic rates inclusive of transportation charges, earth work excavation, labour charges, cutting and threading, conveyance, welding and hire charges for tools and plants ets., complete (KRDWS&S SOR - 2019-20 , It.No.15.40))
1
19451
19451
... More
code24 - Cutting road surface for pipeline, trenches and disposing of the excavated stuff directed Including barricading danger, lightning, etc. In the classification for , Cutting cement concrete road surface by machine cutting to demarcate the each width of the surface [CSR VOL V 2021-22 Chapter No:2 SOR code A105C, Page No-63 ]
12.6
951
11982.6
... More
code25 - Cutting in Asphalt Road Surface to demarcate the trench width of the surface [CSR VOL V 2021-22 Chapter No:2 SOR code A105B, Page No-63 ]
5.4
891
4811.4
... More
code26 - Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work. UNI S0R 2021-22 Chapter No: 1 Item No: 1.6.1]
108
371
40068
... More
code27 - Providing & fixing electro fusion saddle comply with Bs EN12201 -3:2011, PN-12.5 rating and food grade raw material as per BS 6920 with material of construction PE 80 or PE 100 and colour of fitting - Blue/Black for water applications, EF tappinB saddle is V-Regarding type.Designed to fuse at a fusion voltage of 40 volt Ac. EF tapping saddle shall have moulded SS/Brass metal female threaded outlet. EF tapping saddle is fused by using a top loading piller type pressure exertin8 150ON (150 kg appn.) top load on EF saddle. Fusion tlme is 170 secs and cooling time is 10mins, Exerted pressure shoud be removed after completing the 10 mins cooling time. 63x20,75x20,90x20,110x20,140x20 .Including cost of all materials, labour, transportation and other incidental charges incur during the execution of work and as per directions of Engineer incharge of work.For 20mm connections (2nd Corrigendum - Volume.5 schedule of Rates we.f 7.06.2022, Itno.K210)
200
350
70000
... More
code28 - Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including testing for water tightness, with all lead and commissioning. (contractor will make his own arrangements for procuring water for testing) (For Heavy Duty GI pipe:) [CSR VOL V 2021-22Chapter No:13 SOR code N010 B,N010 D Page No-142 ]
120
320
38438.4
... More
code29 - Providing and fixing 3 layer PP-R (Poly Propylene Random Copolymer) pipes confirming to IS.15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply, including all PP-R plain and brass threaded polypropylene random fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes testing of joints complete as per direction of Engineer-In- Charge. [CSR VOL V 2021-22Chapter No:63.2 SOR code ,B170 B Page No-81 ]
1000
180
180000
... More
code30 - Flow control Valve 5LPM/10LPM/15LPM: Providing & fixing Flow control Valve using food grade materials SS 316 ball/1/2*[15mm including cost of all materials,labour charges HOM & Testing completes as per following specification] [CSR VOL V 2021-22Chapter No:13 SOR code N090B Page No-143 ]
200
255
51000
... More
code31 - Supplying and fixing Multijet class B inferential type, AMR compatible water meters with IP 68 protection totalizer confoming to IS 779 with its latest amendments of following size to service connections including conveying and fixing of necessary G.I. specials with appurtenances. complete, with all lead and lift. [CSR VOL V 2021-22 Chapter No:3 SOR code B118B ,Page No-79 ]
200
2645
529000
... More
code32 - Supply and fixing of HDPE water meter box with locking arrangement to protect the water meter of Class ‘B’ Multijet type of size 15 to 32 mm including HDPE box with base dia 300mm x lid dia 200mm x height 250mm with openable lid and the cover is buried below GL with lid flush with GL including earth work excavation for 600mm x 600mm and base sand filling for 100mm thick over which the cover is placed and enclosed by PCC 1:2:4 using 12-20mm BG jelly for an height of 150mm and refilling with excavated earth for balance 100mm height, disposal of excess earth with all lead and lifts with appurtenances complete as per drawing enclosed. [BWSSB-V SR 2021-22 Chapter No: 11 Item No:23]
200
509
101800
... More
code33 - Supply of PPR Female Threated Coupling conforming to IS 15801-2008 and DIN Standard 8077/8092 (B191B)2nd addendum vide Ref 222 CE Office,BWSSB 2022-23 Dt:07/06/2022
200
66
13200
... More
code34 - Supply of PPR End cap conforming ro IS 15801-2008 and DIN Standard 8077/8092 (B181B)2nd addendum vide Ref 222 CE Office,BWSSB 2022-23 Dt:07/06/2022
200
11
2200
... More
code35 - Supply of PPR Union conforming to IS 15801-2008 and DIN Standard 8077/8092 (B184A) 2nd addendum vide Ref 222 CE Office,BWSSB 2022-23 Dt:07/06/2022
200
58
11600
... More
code36 - Supply of PPR Gate Valve conforming to IS 15801-2008 and DIN Standard 8077/8092 (B196A) 2nd addendum vide Ref 222 CE Office,BWSSB 2022-23 Dt:07/06/2022
200
146
29200
... More
code37 - Providing and fixing brass bib cock of approved quality [CSR VOL II 2021-22 ,Item No: 13.2.2,Page No- 115 ]
200
345
69000
... More
code38 - Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M20 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 m3 capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including construction joints, primer, sealant , curing of concrete slabs for 14- days, and water finishing to lines and grade as per drawing and technical specification clause 1501 with all lead, lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments etc., complete. as per the directions of the Engineer-in-charge of the work. [CSR VOL III 2021-22 Item No:20.28 MORTH code 1501 ,Page No-137 ]
23.4
6152
143956.8
... More
code39 - Supply and fixing of RCC demarcation stones of 30cms x 15cms and 90cms using 1:2:4 CC and 6mm dia rods for verticals and stirrups and rendered smooth,including engraving letters "KWD and ARROW" 6mm deep on the top including fixing demarcation stones 45cm below ground level and CC 1:3:6 ,5cms height with 8cms offset around the stone and curing for 10 days including earthwork in all types of soils with al lead and lift:(STAND POST) [CSR VOL V 2021-22 Chapter No:3 SOR code B130A ,Page No-80 ]
200
440
88000
... More
code40 - Supplying at site pot rest slab of 0.45m x 0.3m x 0.2m in CC 1:2:4 proportion with granite metal 20mm and down size including plank centering and form work,machine mixing,tamping including plastering 20mm thick in C.M 1:4 proportion with all lead as per specification with appurtenances,complete WSSB-2021-22 Vol -5 Page No.59(Item code:B130D)
200
391
78200
... More
code41 - Wall painting with acrylic, emulsion, paint of approved brand and manufacture to give in even shade Two coats on new work after thoroughly brooming the surface to remove all dirt,dust, drops and foreign matters, including repairing the surface even and sandpaper, smooth coat of materials, labour complete As per specifications and as per directions of engineer in charge [CSR 2021-22 Vol-2 Item No:8.39 ,Page No-48 ]
198
95
18810
... More
code42 - Providing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to gie an even shade
20000
1
24000
... More
code43 - Earth work excavation by manual means for drains,canals, waste weir,draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work.. Including cost of all materials, labour, transportation and other incidental charges incur during the execution of work and as per directions of Engineer incharge of work. In all kinds of soils Depth up to 1.5 m [ CSR 2021-22 ,Vol-I, Chapter No: 1 Item No: 1.4.1]
4.5
186
837
... More
code44 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Including cost of all materials, labour, transportation and other incidental charges incur during the execution of work and as per directions of Engineer incharge of work. Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates [ CSR Vol-I 2021-22, Chapter No: 2 Item No: 2.1.3]
0.45
5554
2499.3
... More
code45 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, plywood / steel formwork, cost of all materials of quality, labour, Usage charges of machineries, curing and all the other appurtenances required to complete the work as per technical specifications. ( The cost of steel reinforcement shall be paid separately) .Including cost of all materials, labour, transportation and other incidental charges incur during the execution of work and as per directions of Engineer incharge of work.P&L PCC 1:1.5:3 (20mm aggregates) [WS&UW CSR 2021-22, Vol-V,Chapter No:9,ItemNo:1.2,SOR CODE:I030B]
1.49
6280
9357.2
... More
code46 - Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) [CSR 2021-22, Vol-II, Chapter No.11, Item No:11.32][Approved Rate]
0.0894
61864
5530.6416
... More
code47 - Providing two coats of water proof cement painting with approved colour and shade over one coat of primer including scrapping the surface with wire brushes etc. before removal of scaffolding for new RCC over head tanks and cleaning of paint stains wherever necessary with all lead and lifts etc. complete for: . Including cost of all materials, labour, transportation and other incidental charges incur during the execution of work and as per directions of Engineer incharge of work. Tanks staging above 6 m and upto 9 m CSR VOLUME -5 SR (Page no 113 Item No :20.2 SOR Code H210B)
197.6908
153
30246.6924
... More
code48 - Providing and fixing MS ladder between landings, 45 cms wide using angle iron of specified sizes, 20mm MS bars at 25 cms. centre to centre, with necessary supports of same angle iron etc. as directed, including hand railing on both sides with 25mm dia. GI pipes with angle iron props at 2 mtrs. intervals and 0.5M heigh, including fixing in ground with CC 1:2:4 and two coats of anticorrosive bituminous paint etc. with all lead and lifts etc. complete with: MS angle of 65 x 65 x 10mmIncluding cost of all materials, labour, transportation and other incidental charges incur during the execution of work and as per directions of Engineer incharge of work. for:MS angle of 65x65x10mm (CSR VOLUME -5 SR (Page no 111 Item No : 11.2 SOR Code H110B)
3.3
4747
15665.1
... More
code49 - Providing and laying in position Reinforced cement concrete for columns, braces and ring beam above ground level. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes with plastering and smooth finishing the exposed faces in cement mortar 1:3, 12 mm thick, labour,centering, scaffolding, staging, strutting, plywood/ steel form work , Usage charges of machinery, curing and all other appurtenances required to complete the work as per design and technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately)Including cost of all materials, labour, transportation and other incidental charges incur during the execution of work and as per directions of Engineer incharge of work. (CSR VOLUME -5 SR (Page no 108 Item No :3.2 SOR Code H030B)
6.2187
15662
97397.2794
... More
code50 - Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes , labour, strutting, plywood / steel form work , Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement to be paid separately) (Minimum cement content: 340 kgs (6.80 bags)).Including cost of all materials, labour, transportation and other incidental charges incur during the execution of work and as per directions of Engineer incharge of work. (CSR VOLUME -2 SR (Page no 163 Item No :19.3 SOR Code H020A)
0.6255
8292
5186.646
... More
code51 - Cleaning of Water Storage Tank or Sump by following method: (1) Empty the Tank/ Sump and make it to near dry, (2) Apply bleaching powder uniformally (@ Tank capacity x 0.5 gms/litre) inside the Tank/ Sump and wait for one hour, (3) After one hour, clean/ rinse the Tank/ Sump with fresh water. Repeat the process (2) & (3) for two to three times, all complete, as directed by the Engineer-in-charge. .Including cost of all materials, labour, transportation and other incidental charges incur during the execution of work and as per directions of Engineer incharge of work. (CSR VOLUME -5 SR (Page no 210 Item No :4 SOR Code V010D)
50000
1
50000
... More
code52 - Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. including painting with anticorrosive approved paint etc. complete including all lead and lifts etc.Including cost of all materials, labour, transportation and other incidental charges incur during the execution of work and as per directions of Engineer incharge of work. (CSR VOLUME -5 SR (Page no 111 Item No : 13 SOR Code H140A)
1
2111
2111
... More
code53 - Printing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade English and Roman.Including cost of all materials, labour, transportation and other incidental charges incur during the execution of work and as per directions of Engineer incharge of work. (CSR VOLUME -III SR Page no 53 Item No :8.4)
500
10
5250
... More
code54 - Supplying and fixing DI/CI puddle flanges conforming to IS 7181-1986 with latest ammendments., in position for RCC walls including hoisting and conveying them to work spot with all lead and lifts etc. complete.Including cost of all materials, labour, transportation and other incidental charges incur during the execution of work and as per directions of Engineer incharge of work.80 mm dia for Inlet & Outlet (CSR VOLUME -5 SR (Page no 112 Item No : 15.1 SOR Code H160A)
15
1526
22890
... More
code55 - Supplying and fixing DI/CI puddle flanges conforming to IS 7181-1986 with latest ammendments., in position for RCC walls including hoisting and conveying them to work spot with all lead and lifts etc. complete.Including cost of all materials, labour, transportation and other incidental charges incur during the execution of work and as per directions of Engineer incharge of work.100 mm dia for Inlet & Outlet (CSR VOLUME -5 SR (Page no 112 Item No : 15.1 SOR Code H160A)
10
1807
18070
... More
code56 - Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work.In Hard Soil - Including cost of all materials, labour, transportation and other incidental charges incur during the execution of work and as per directions of Engineer incharge of work.- Depth up to 1.50m CSR VOLUME -1 SR (Page no 6 Item No :1.6.1 )
360
371
133560
... More
code57 - Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bracing, using sight rails & boning rods at every 100 mm whevere necessary as directed, removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench to the extent required , utilising the available excavated earth locally for the work etc., and all other appurtenances complete in the following strata.In Hard Soil - Including cost of all materials, labour, transportation and other incidental charges incur during the execution of work and as per directions of Engineer incharge of work. - Depth up to 1.50m CSR VOLUME -1 SR (Page no 10 Item No :1.17.1 )
360
194
69840
... More
code58 - Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. Note: Upto 110mm dia Coil shall be used..- .Including cost of all materials, labour, transportation and other incidental charges incur during the execution of work and as per directions of Engineer incharge of work.75mm diameter PE100(PN 8.0 / 6 Kg/cm2 (VOLUME - 5 SR Page no 127 Item No :1.2 SOR Code K070B))
2000
239
478400
... More
code59 - Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5 m.Including cost of all labour complete as per specifications..Including cost of all materials, labour, transportation and other incidental charges incur during the execution of work and as per directions of Engineer incharge of work. lead up to 50 m and lift upto 1.5 m CSR VOLUME -1 SR (Page no 7 Item No :1.10 )
360
122
43920
... More
code60 - Providing 80mm dia air valve conforming to IS 1538 (Part-1 to 22) 1978 with latest amendments
1
3000
3000
... More
code61 - 75 MM ELECTRO FUSION COUPLER CSR-2021-22 Vol-V Page No.3 Item No 95
10
153
1530
... More
code62 - 75 MM ELECTRO FUSION ELBOW CSR-2021-22 Vol-V Page No.3 Item No 97
10
246
2460
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements