Rural Drinking Water And Sanitation Department Tender
... More
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
Costs
EMD
₹ 2,51,040Document Cost
Refer DocumentsTender Fee
₹ 4,190
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
RWSSD/2024-25/WT/WORK_INDENT8075/CALL-2Tender No
RWSSD/2024-25/WT/WORK_INDENT8075/CALL-2Tender Authority
Rural Drinking Water And Sanitation Department ViewPurchaser Address
-Website
http://https://jalshakti-ddws.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Others - tender notification copy
BOQ Items
... More
code04 - Earth work excavation for pipeline trenches in all kinds of Soil by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bracing, using sight rails & bonding rods at every 100 mm whevere necessary as directed, removal of slumps and other deleterious matter, dressing of sides and levelling the bottom of trench to the extent required , utilising the available excavated earth locally for the work etc. and all other appurtenances to complete in the following strata. All kinds of soil. Depth up to 1.50m complete as per specification and direction of Engineer in charge .
12.72
186
2365.92
... More
code05 - Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bracing, using sight rails & boning rods at every 100 mm whevere necessary as directed, removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench to the extent required , utilising the available excavated earth locally for the work etc., and all other appurtenances complete in the following strata. complete as per specification and direction of Engineer in charge .
1235.25
194
239638.5
... More
code06 - Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work complete as per specification and direction of Engineer in charge .
2005.88
371
744181.48
... More
code07 - Earth work excavation for pipeline trenches in all kinds of by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bracing, using sight rails & bonding rods at every 100 mm whevere necessary as directed, removal of slumps and other deleterious matter, dressing of sides and levelling the bottom of trench to the extent required , utilising the available excavated earth locally for the work and all other appurtenances to complete complete as per specification and direction of Engineer in charge .
1173.82
342
401446.44
... More
code08 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, plywood / steel formwork, cost of all materials of quality, labour, Usage charges of machineries, curing and all the other appurtenances required to complete the work as per technical specifications. ( The cost of steel reinforcement shall be paid separately). PCC 1:3:6 using 40 mm aggregate complete as per specification and direction of Engineer in charge .
2.9
6392
18536.8
... More
code09 - Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes , labour, strutting, plywood / steel form work , Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement to be paid separately) (Minimum cement content: 340 kgs (6.80 bags)) RCC M25 Design Mix with 20mm aggregate for footings, rafts and combind footing etc.with smooth finishing the exposed faces in CM 1:4, 12mm thick etc. complete as per specification and direction of Engineer in charge .
9.72
9180
89229.6
... More
code10 - Providing and laying in position Reinforced cement concrete for columns, braces and ring beam above ground level. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes with plastering and smooth finishing the exposed faces in cement mortar 1:3, 12 mm thick, labour,centering, scaffolding, staging, strutting, plywood/ steel form work , Usage charges of machinery, curing and all other appurtenances required to complete the work as per design and technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately). (Minimum cement content: 360 kgs (7.20 bags)). RCC M30 Design Mix with 20mm aggregate for level upto 6 m to 9 m height. complete as per specification and direction of Engineer in charge .
7.73
15662
121067.26
... More
code11 - Providing and laying in position Reinforced cement concrete for shell portion, bottom dome / slab and ribs over the staging. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes with plastering and smooth finishing the exposed faces in cement mortar 1:3, 12 mm thick and CM plastering 1:3 proportion 20mm thick for inside with an admixture of water proof compound of requisite proportion of approved quality, labour,centering, scaffolding, staging, strutting, plywood/ steel form work , Usage charges of machinery, curing and all other appurtenances required to complete the work as per design and technical specifications.(Contractor will make his own arrangements for procuring water for testing). (The cost of steel reinforcement, dowel bars to be paid separately). (Minimum cement content: 360 kgs (7.20 bags)).M30 Design Mix with 20mm aggregate for level and 6 to 9 m height. complete as per specification and direction of Engineer in charge .
15.54
23551
365982.54
... More
code12 - Providing and laying in position Reinforced cement concrete for top dome of water tank over the staging above the ground level. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes with plastering and smooth finishing in cement mortar 1:3, 12 mm thick for both inside and outside surface, labour,centering, scaffolding, staging, strutting, plywood/ steel form work , Usage charges of machinery, curing and all other appurtenances required to complete the work as per design and technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately). (Minimum cement content: 360 kgs (7.20 bags))RCC M30 Design Mix with 20mm aggregate for level and 6 -9 m height. complete as per specification and direction of Engineer in charge .
3.23
24019
77581.37
... More
code13 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, plywood / steel formwork, cost of all materials of quality, labour, Usage charges of machineries, curing and all the other appurtenances required to complete the work as per technical specifications. ( The cost of steel reinforcement shall be paid separately). PCC 1:1.5:3 using 20 mm aggregate complete as per specification and direction of Engineer in charge .
1.964
7135
14013.14
... More
code14 - Supplying and delivery of TMT Fe 550 & above Reinforcement complete as per specification and direction of Engineer in charge .
4.063
64830
263404.29
... More
code15 - Labour charges for fabricating mild steel or torsteel bars of all sizes for reinforcement for RCC works including conveying steel to work spot with all lead including cleaning, straightening, bending, fabricating, placing in position and tieing as per design including cost of binding wire, hoisting etc. with all lifts etc. complete (excluding the cost of steel)) complete as per specification and direction of Engineer in charge .
4.06
11557
46921.42
... More
code16 - Providing and fixing MS ladder between landings, 45 cms wide using angle iron of specified sizes, 20mm MS bars at 25 cms. centre to centre, with necessary supports of same angle iron etc. as directed, including hand railing on both sides with 25mm dia. GI pipes with angle iron props at 2 mtrs. intervals and 0.5M heigh, including fixing in ground with CC 1:2:4 and two coats of anticorrosive bituminous paint etc. with all lead and lifts etc. complete with: MS angle of 65 x 65 x 8mm. complete as per specification and direction of Engineer in charge .
13
4523
58799
... More
code17 - Ladder inside the container :- Providing another aluminium ladder using 65mm *32mm*3.0mm "C" section for ladder side channel x 25mm dia. ., flutal pipe for rungs at 250mm c/c ladder fixed at an angle of 70 degrees to horizontal including necessary 25mm dia. G.I shutters with necessary G.I . fasteners for bracing the ladders to the tank walls to prevent buckling of the ladder with necessary (M-15) bed for ewmbedding the ladder bottom complete complete as per specification and direction of Engineer in charge .
3.05
5100
15555
... More
code18 - Providing and fixing RCC final and ventilators as per approved design and specifications with form works and protected with wire mesh. The plinth to be of RCC circular pillars and canopy with an ornamental finish at top. The first 22.5 cms height to be covered with RCC panelling as per detailed drawings etc. with all lead and lifts and excluding reinforcement steel. For over head tanks upto 2.5 lakhs capacity. complete as per specification and direction of Engineer in charge .
4
5750
23000
... More
code19 - Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. including painting with anticorrosive approved paint etc. complete including all lead and lifts etc. complete as per specification and direction of Engineer in charge .
1
2111
2111
... More
code20 - Providing and laying 100mm thick pre-cast cover slabs over drains & Rain pit of width not exceeding 800 mm using M20 concrete reinforced with Micro Alloyed High carbon steel with 3mm - 3ply wired steel @ 2.00 kg/m2, slabs jointed in CM 1:3 proportion and nicely finished Including providing holes in the Cover slabs wherever necessary for easy drainage of surface water including of labour, materials, scaffolding, usage of machinery, curing, lead and lift charges etc, Complete. complete as per specification and direction of Engineer in charge . cover slab (600x600) mm
2.56
833
2132.48
... More
code21 - Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications complete as per specification and direction of Engineer in charge .
7.8
940
7332
... More
code22 - Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and complete as per specification and direction of Engineer in charge complete as per specification and direction of Engineer in charge .
14.56
248
3610.88
... More
code23 - Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. Note: Upto 110mm dia Coil shall be used. For Grade PE100 PN6.0 complete as per specification and direction of Engineer in charge . 63mm dia pipe
15318.4
168
2586358.656
... More
code24 - Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. Note: Upto 110mm dia Coil shall be used. For Grade PE100 PN6.0 complete as per specification and direction of Engineer in charge . 110mm dia pipe
111
406
45068.22
... More
code25 - Providing two coats of water proof cement painting with approved colour and shade over one coat of primer including necessary scaffolding and scrapping of old paint and stain with wire brushes and cleaning of paint stains etc. wherever necessary for old RCC over head tanks with all lead and lifts etc. complete for: Tanks staging above 6 m and upto 9 m Complete as per specifications and as per directions of Engineer-in-charge. staging above 6 m and upto 9 m
275.46
164
45175.44
... More
code26 - Providing two coats of water proof cement painting with approved colour and shade over one coat of primer including scrapping the surface with wire brushes etc. before removal of scaffolding for new RCC over head tanks and cleaning of paint stains wherever necessary with all lead and lifts etc. complete for complete as per specification and direction of Engineer in charge .Tanks upto 6 Mtrs. staging.
101.52
135
13705.2
... More
code27 - Providing two coats of water proof cement painting with approved colour and shade over one coat of primer including scrapping the surface with wire brushes etc. before removal of scaffolding for new RCC over head tanks and cleaning of paint stains wherever necessary with all lead and lifts etc. complete for complete as per specification and direction of Engineer in charge . Tanks staging above 6 m and upto 9 m
100.8
153
15422.4
... More
code28 - Providing and laying water proofing treatment to the Water tanks & Liquid Retaining structures with two component acrylic polymer modified cementitious waterproofing membrane with minimum elongation of 50% applied @ 1.5 kg/m2 for internal side waterproofing in two layers with waiting period of 4-6 hrs per layer and food grade epoxy coating in two coats certified by CFTRI Mysuru, including surface preparation completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. complete as per specification and direction of Engineer in charge .
191.98
455
87350.9
... More
code29 - Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS- 1865 and of grade GGG 40/50, shaft of stainless steel, wedge fully rubber lined with EDPM seals of NBR and the valves should be vacum tight and 100% leak proof with face to face dimensions as per IS 14846-2000 only. The stem sealing should be with toroidal sealing rings (minimum 2 “ O “ rings). Body and bonut should be coated with Electrostatically applied Epoxy Powder Coating with minimum coating thickness of 250 micron both inside and outside. The rate is inclusive of cost of valves, T.P set, galvanized bolts & nuts and rubber insertions etc. but excluding earth work. (Note: TP set should be considered only for DI pipes estimate. For MS pipes estimates, TP sets cost of corresponding dia shall be deducted from the SR rates of valves and provision for corresponding dia MS flanges should be made in the estimate.) For PN-10: complete as per specification and direction of Engineer in charge .80mm dia for RM, Scour and overflow
9
8013
72117
... More
code30 - Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS- 1865 and of grade GGG 40/50, shaft of stainless steel, wedge fully rubber lined with EDPM seals of NBR and the valves should be vacum tight and 100% leak proof with face to face dimensions as per IS 14846-2000 only. The stem sealing should be with toroidal sealing rings (minimum 2 “ O “ rings). Body and bonut should be coated with Electrostatically applied Epoxy Powder Coating with minimum coating thickness of 250 micron both inside and outside. The rate is inclusive of cost of valves, T.P set, galvanized bolts & nuts and rubber insertions etc. but excluding earth work. (Note: TP set should be considered only for DI pipes estimate. For MS pipes estimates, TP sets cost of corresponding dia shall be deducted from the SR rates of valves and provision for corresponding dia MS flanges should be made in the estimate.) For PN-10: complete as per specification and direction of Engineer in charge .100mm for Outlet
1
8858
8858
... More
code31 - Supplying and fixing DI/CI puddle flanges conforming to IS 7181-1986 with latest ammendments., in position for RCC walls including hoisting and conveying them to work spot with all lead and lifts etc. complete . complete as per specification and direction of Engineer in charge . 80mm dia for RM, Scour and overflow
3
1526
4578
... More
code32 - Supplying and fixing DI/CI puddle flanges conforming to IS 7181-1986 with latest ammendments., in position for RCC walls including hoisting and conveying them to work spot with all lead and lifts etc. complete . complete as per specification and direction of Engineer in charge .150 mm for outlet
1
2314
2314
... More
code33 - Supplying, Laying and Jointing Cast Iron (CI) double flanged pipes true to line / hoisting of DIflanged pipe in position and aligning to correct plumb, including cost of jointing materials, conveying to work spot with all lead and lifts etc.complete. complete as per specification and direction of Engineer in charge . 80mm dia for RM, Scour and overflow
45
2205
99225
... More
code34 - Supplying, Laying and Jointing Cast Iron (CI) double flanged pipes true to line / hoisting of DIflanged pipe in position and aligning to correct plumb, including cost of jointing materials, conveying to work spot with all lead and lifts etc.complete. complete as per specification and direction of Engineer in charge .150mm for Outlet
15
4707
70605
... More
code35 - Supplying and fixing lightening arrestor with aluminium strip 25mm x 3mm size including finial and grounding, aluminium strip to be embeded in one of the columns in and independent GI conduit of 40mm dia. pipe suitably jointed by collars with all specials with all lead and lifts etc. complete for:For Over Head Tanks upto 9m staging complete as per specification and direction of Engineer in charge .
2
8606
17212
... More
code36 - Supply and delivery of Woltman model with removal mechanism water meters confirming to ISO 4064 part I,II,III class B or IS 779 and IS 2373 with life cycle test certificate from FCRI/ NABLaccredited lab. The water meters shall have magnetic drivers or mechanical drivers and shall beversatile for installation in any position. The meters shall be hydrodynamically, hydrostaticallybalanced. The runner, runner chamber, pointer of the meter shall be as per ISO 4064 class specification. Dry dial excavated counter housing fully protected against flooding ensuring easyreading in all climates. Note: the above rates are basic rates inclusive of transportation charges, earthwork excavation, labour charges, cutting and threading, conveyance, welding and hire charges. complete as per specification and direction of Engineer in charge
2
19451
38902
... More
code37 - Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. complete as per specification and direction of Engineer in charge.
1512.09
122
184474.98
... More
code38 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, plywood / steel formwork, cost of all materials of quality, labour, Usage charges of machineries, curing and all the other appurtenances required to complete the work as per technical specifications. ( The cost of steel reinforcement shall be paid separately). - PCC 1:2:4 using 40 mm aggregate. as per specification and direction of Engineer in charge .
4.98
6539
32564.22
... More
code39 - Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matter, cost of materials, labour complete as per specifications and complete as per specification and direction of Engineer in charge . complete as per specification and direction of Engineer in charge .
20000
3
60000
... More
code40 - Supplying and installation of Class SN8 Double Wall Corrugated HDPE pipe Specials outer wall corrugated and inner wall smooth piping system in accordance with IS 16098 part 2 and conveying to work site and lowering into trenches, laying true to line and level and perfect linking at joints with the help of two “O” rings and a coupler of suitable size, including loading and unloading at both destination including jointing with all labour, all lead and lift including encasing the special around to a depth of not less than 15 cm with screened soft soil available from the excavated soil. The testing commissioning including necessary hydraulic test to the required pressure as per ISS shall be done (the contractor shall have to make his own arrangement for procuring water for testing) complete as per specification and direction of Engineer in charge .] Couplers-(63 mm dia)
52
141
7332
... More
code41 - Supplying and installation of Class SN8 Double Wall Corrugated HDPE pipe Specials outer wall corrugated and inner wall smooth piping system in accordance with IS 16098 part 2 and conveying to work site and lowering into trenches, laying true to line and level and perfect linking at joints with the help of two “O” rings and a coupler of suitable size, including loading and unloading at both destination including jointing with all labour, all lead and lift including encasing the special around to a depth of not less than 15 cm with screened soft soil available from the excavated soil. The testing commissioning including necessary hydraulic test to the required pressure as per ISS shall be done (the contractor shall have to make his own arrangement for procuring water for testing) complete as per specification and direction of Engineer in charge .] Tee-(63 mm dia)
28
246
6888
... More
code42 - Supplying and installation of Class SN8 Double Wall Corrugated HDPE pipe Specials outer wall corrugated and inner wall smooth piping system in accordance with IS 16098 part 2 and conveying to work site and lowering into trenches, laying true to line and level and perfect linking at joints with the help of two “O” rings and a coupler of suitable size, including loading and unloading at both destination including jointing with all labour, all lead and lift including encasing the special around to a depth of not less than 15 cm with screened soft soil available from the excavated soil. The testing commissioning including necessary hydraulic test to the required pressure as per ISS shall be done (the contractor shall have to make his own arrangement for procuring water for testing) complete as per specification and direction of Engineer in charge .] Elbow-(63 mm dia)
8
247
1976
... More
code43 - 63 mm dia HDPE End Cap with Pipe of 0.2 m length complete as per specification and direction of Engineer in charge . 63 mm dia
47
81
3807
... More
code44 - Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments complete as per specification and direction of Engineer in charge . 65 mm dia
24
1550
37200
... More
code45 - Providing 80 mm dia Air valve confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any.The valve shall be Supplied with suitable size galvanised bolts and nuts of required numbers as per relevant IS. complete as per specification and direction of Engineer in charge .For Air valve, 80 mm dia
4
2700
10800
... More
code46 - Providing 80 mm dia Air valve confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any.The valve shall be Supplied with suitable size galvanised bolts and nuts of required numbers as per relevant IS. complete as per specification and direction of Engineer in charge .For Air valve, 125 mm dia
2
3578
7156
... More
code47 - Labour charges for making flanged joints including cost of jointing materials comprising of rubber insertion, bolts and nuts including giving hydraulic test to the required pressure as per ISS with all lead & lift (contractor will make his own arrangement for procuring water for testing). complete as per specification and direction of Engineer in charge .80mm dia
30
119
3570
... More
code48 - Supply and fixing of DI Double flanged wafer type ( Concentric) / double eccentrically disc, Resilent seated Butterfly valves confoming to BS EN 593 / IS 13095 with shaft shall be of stainless steel AISI 410/431/420 and renewable soft seal on the disc and body seat face of nickel weld overlay micro finished/Bolted External Seat of SS 304 / CF8 with Powder or liquid epoxy coating with minimum thickness of 250 microns applied on both body and disc inside and outside. Fce to face dimensions as per EN 558-1 Basic series 14 (DIN 3203 F4) or AWWA C 504 : 80 or IS 13095. The valves shall be supplied along with the required number of standard make galvanized Bolts and nuits. The flange drilling standard is IS 1538. hence, drilling of hole in the valves shall match with the pipe flange drilling standard, the valves are to be suitabale for buried operaion with the gear box sealed and lubricated for life time opration. ( All the drilled holes in the body shall be of though holes, no tapped holes will be allowed) For PN 10.0 complete as per specification and direction of Engineer in charge . 150mm dia
3
17294
51882
... More
code49 - Supplying and fixing surface box of required dia. and size with synthetic lid for valves or spindle rods. The surface box should be usable for 50 to 400mm dia. valves, PN 10 / 16 and will consist of lid, housing, locking clip, notched bolt, cross bar, washer and torque nut. complete as per specification and direction of Engineer in charge .
30
3339
100170
... More
code50 - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. complete as per specification and direction of Engineer in charge . WMM
135.75
2394
324985.5
... More
code51 - Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M20 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 m3 capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including construction joints, primer, sealant , curing of concrete slabs for 14- days, and water finishing to lines and grade as per drawing and technical specification clause 1501 with all lead, lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments etc., complete. as per the directions of the Engineer-in-charge of the work. complete as per specification and direction of Engineer in charge .CC Road Surface
488.97
6152
3008143.44
... More
code52 - Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge & MoRTH specification 804
1
9000
9000
... More
code53 - Providing and fixing electro fusion saddle comply with BS EN12201-3:2011, PN-12.5 rating and food grade raw material as per BS 6920 with material of construction PE 80 or PE 100 and colour of fitting- Blue/ Black for wter applications, EF tapping saddle is V-Regarding type. Designed to fuse at a fusion voltage of 40 volt AC. EF tapping saddle shall have moulded SS/Brass metal female threaded outlet. EF tapping saddle is fused by using a top loading piller type pressure exerting 1500N (150 kg approx.) top load on EF saddle. Fusion time is 170 secs and cooling time is 10mins, Exerted pressure shoud be removed after completing the 10 mins cooling time. 63x20, 75x20, 90x20, 110x20, 140x20. complete as per specification and direction of Engineer in charge .63mm dia
908
350
317800
... More
code54 - Pmviding ard fixing 3 layer PP-R (Poly Propylene Rardom Copolymer) pipes confiming to IS.l580l with WRAS and NSF certificares with UV stabilized and anti-micrcbial firsion welded, having thermalal stability for hot and cold water supply, including all PP-R plain and brass threded poly propylene random fittings, including fixing the pipe with clamps at 1.00 m spacing (Excluding Special Fittings). This includes the lot wise test report as per the relevant ISISO/DIN/BIS codes and also testing of joints complete as per diroction of Engineer-ln- Charge. complete as per specification and direction of Engineer in charge .PN - 16 Pipe, SDR 7.4 -20 mm OD
3632
180
653760
... More
code55 - Pmviding ard fixing 3 layer PP-R (Poly Propylene Rardom Copolymer) pipes confiming to IS.l580l with WRAS and NSF certificares with UV stabilized and anti-micrcbial firsion welded, having thermalal stability for hot and cold water supply, including all PP-R plain and brass threded poly propylene random fittings, including fixing the pipe with clamps at 1.00 m spacing (Excluding Special Fittings). This includes the lot wise test report as per the relevant ISISO/DIN/BIS codes and also testing of joints complete as per diroction of Engineer-ln- Charge. complete as per specification and direction of Engineer in charge .25mm dia
1816
227
412232
... More
code56 - Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including testing for water tightness, with all lead and commissioning. (contractor will make his own arrangements for procuring water for testing) For Meadium Duty GI pipe: complete as per specification and direction of Engineer in charge .GI for Encasing under drain
908
336
305587.4
... More
code57 - Flow Control Valve5LPM/10LPM/15LPM : Providing & fixing flow control valve using food grade materials SS 316 ball / 1/2" (15mm) including cost of all materials, labour charges, HOM and testing complete as per of following specification. complete as per specification and direction of Engineer in charge .
908
255
231540
... More
code58 - Supplying and fixing Multijet class B inferential type, AMR compatible water meters with IP 68 protection totalizer confoming to IS 779 with its latest amendments of following size to service connections including conveying and fixing of necessary G.I. specials with appurtenances. complete, with all lead and lift. complete as per specification and direction of Engineer in charge . 20mm dia
908
2645
2401660
... More
code59 - Supply and fixing of HDPE water meter box with locking arrangement to protect the water meter of Class ‘B’ Multijet type of size 15 to 32 mm including HDPE box with base dia 300mm x lid dia 200mm x height 250mm with openable lid and the cover is buried below GL with lid flush with GL including earth work excavation for 600mm x 600mm and base sand filling for 100mm thick over which the cover is placed and enclosed by PCC 1:2:4 using 12-20mm BG jelly for an height of 150mm and refilling with excavated earth for balance 100mm height, disposal of excess earth with all lead and lifts with appurtenances complete as per drawing enclosed. complete as per specification and direction of Engineer in charge . 15 to 32 mm dia
908
509
462172
... More
code60 - supply of PPR Female Threaded Coupling confirming to lS 15801-2008 and DIN Standards 8077 /8092 (B191B) 2nd Memorendum Vide Ref 222 CE Office, complete as per specification and direction of Engineer in charge .20* 1/2 dia
3632
59
214288
... More
code61 - supply of PPR Female Threaded Coupling confirming to lS 15801-2008 and DIN Standards 8077 /8092 (B191B) 2nd Memorendum Vide Ref 222 CE Office, complete as per specification and direction of Engineer in charge .25* 1/2 dia
908
66
59928
... More
code62 - Supply of PPR plain Union confirming to IS 15801-2008 and DIN Standards 8077/8092 (B184A) 2nd Memorendum Vide Ref 222 CE Office, complete as per specification and direction of Engineer in charge .20mm dia
1816
58
105328
... More
code63 - Supply of PPR Gate Valve confirming to IS 15801-2008 and DIN Standards 8077/8092 (B196A) 2nd Memorendum Vide Ref 222 CE Office, complete as per specification and direction of Engineer in charge . 20mm dia
908
378
343224
... More
code64 - Providing and fixing brass bib cock of approved quality complete as per specification and direction of Engineer in charge . 20mm dia nominal Bore
908
345
313260
... More
code65 - Supplying and fixing of RCC demarcation stones of 30 cms x 15 cms and 90 cms deep using 1:2:4 cc and 6 mm dia rods for verticals and stirrups and rendered smooth,including engraving letters "KWB and Arrow" 6mm deep on the top including fixingdemarcation stones 45 cms below ground level and CC 1:3:6, 15 cms height with 8 cms offset around the stone and curing for 10 days including earthwork excavation in all types of soils with all lead and lift . as per specification and direction of Engineer in charge
908
440
399520
... More
code66 - Supply and fixing pot rest slab of size 0.45 x 0.30 x 0.20 meters with central dip for resting the pot including two line dressing and edges rounded and with all lead. as per specification and direction of Engineer in charge
908
513
465804
... More
code67 - Painting Two Coats on New Concrete Surfaces: Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces complete as per specification and direction of Engineer in charge .
490.32
85
41677.2
... More
code68 - Printing New Letter and Figures of any Shade:Printing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade. complete as per specification and direction of Engineer in charge .JJM 2021-22 H NO
68100
1
81720
... More
code69 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. Thegranite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 ( M10) Using 40 mm nominal size graded crushed coarse aggregates complete as per specification and direction of Engineer in charge .
0.48
5554
2665.92
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements