Rural Drinking Water And Sanitation Department Tender

code04 - Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Stone Aggregate (Single size) : 20 mm nominal size Material Requirement : Cement= 320 kgs ( 6.40 bags): Metal: 0.85 m3 : Sand= 0.43 m3 complete as per direction of the Engineer-in-charge of the work

code05 - Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) complete as per direction of the Engineer-in-charge of the work

code06 - Supplying UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of UPVC pipes (with cost of elastomeric sealing rings) and specials (excluding cost of specials) with jointing of approved type, with all labour, lead & lifts, including encasing the pipes alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving\ necessary hydraulic test to the required pressure as per ISS (contractor will make his own arrangements for procuring water for testing) etc. for: Pipes of SN4, 110mm dia. complete as per direction of the Engineer-in-charge of the work

code07 - Providing and fixing M.S grills fo required pattern in frames of windows etc.with M.s flats ,squaers or round bars etc.Including priming coat with approved steel primer all complete.fixed to openings /wooden frames with rawl plugs screw complete as per direction of the Engineer-in-charge of the work

code08 - collection of 40mm aggregate for filter media at site ( complete as per direction of the Engineer-in-charge of the work

code09 - collection of 20mm aggregate for filter media at site complete as per direction of the Engineer-in-charge of the work

code10 - Labour charges for laying of collected filter media of size 40mm and 20mm in inland drainage including spreading and hand packing in uniform thickness complete as per direction of the Engineer-in-charge of the work

code11 - Providing and fixing of typical Logo board as per specifications and drawing. Two ACP Sheet of 3mm thick, top and Bottom plate duly welded/bolted with MS Square angle 25mm x25mmx 5mm size on back and on the edges. The Top and Bottom plate will be welded/ bolted to 1 nos75x75x6 mm square Hallow section duly embedded in cement concrete M15 Grade of 600*600*600 mm, 450 mm below ground level.Retro- Reflecting Sheet as per IRC:67 Clause 1701.3.8.1 fixed over aluminium sheeting. All sections of steel tube will bepainted with primer and two coats of epoxy paint as per drawing.A.Retro Reflective Trafic Sign As per IRC 67 Clause 1701.3.8.1 Class A Type-1 complete as per direction of the Engineer-in-charge of the work