Rural Drinking Water And Sanitation Department Tender
... More
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
Costs
EMD
₹ 39,675Document Cost
Refer DocumentsTender Fee
₹ 1,120
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
RWSSD/2024-25/WT/WORK_INDENT8890Tender No
RWSSD/2024-25/WT/WORK_INDENT8890Tender Authority
Rural Drinking Water And Sanitation Department ViewPurchaser Address
-Website
http://https://jalshakti-ddws.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
code04 - Supplying HDPE pipes conforming to IS 4984:1995 with latest amendments and conveying to work site including loading and unloading at both destination and rolling, lowering into trenches, laying true to line and jointing of pipes and specials by electrofusion welding, as per standerd procedure and guide lines including encasing the pipe around to a depth not less than 15cms with cleaned soft gravel or selected earth available from the excavation etc., complete giving hydraulic test as per relevant IS Specification with all lead and lift including , testing and commissioning. The rate is exclusive of required specials and fittings etc., complete (Contractor will make his own arrangement for procuring water for testing)Upto 125 mm dia,Coils shall be used. PE100 (PN 6.0 / 6 Kg/cm2) [BWSSB-V SR 2021-22 Chapter No: 11 Item No: 10.1-10.5] 63mm
1624
163
266011.2
... More
code05 - Supplying HDPE pipes conforming to IS 4984:1995 with latest amendments and conveying to work site including loading and unloading at both destination and rolling, lowering into trenches, laying true to line and jointing of pipes and specials by electrofusion welding, as per standerd procedure and guide lines including encasing the pipe around to a depth not less than 15cms with cleaned soft gravel or selected earth available from the excavation etc., complete giving hydraulic test as per relevant IS Specification with all lead and lift including , testing and commissioning. The rate is exclusive of required specials and fittings etc., complete (Contractor will make his own arrangement for procuring water for testing)Upto 125 mm dia,Coils shall be used. PE100 (PN 6.0 / 6 Kg/cm2) [BWSSB-V SR 2021-22 Chapter No: 11 Item No: 10.1-10.5] 75 mm
1562
206
322865.4
... More
code06 - Supplying HDPE pipes conforming to IS 4984:1995 with latest amendments and conveying to work site including loading and unloading at both destination and rolling, lowering into trenches, laying true to line and jointing of pipes and specials by electrofusion welding, as per standerd procedure and guide lines including encasing the pipe around to a depth not less than 15cms with cleaned soft gravel or selected earth available from the excavation etc., complete giving hydraulic test as per relevant IS Specification with all lead and lift including , testing and commissioning. The rate is exclusive of required specials and fittings etc., complete (Contractor will make his own arrangement for procuring water for testing)Upto 125 mm dia,Coils shall be used. PE100 (PN 6.0 / 6 Kg/cm2) [BWSSB-V SR 2021-22 Chapter No: 11 Item No: 10.1-10.5] 90 mm
14
269
3767.4
... More
code07 - ELECTRO FUSION COUPLER [BWSSB-V SR 2021-22 Page no 3 ] 63 mm
28
120
3360
... More
code08 - ELECTRO FUSION COUPLER [BWSSB-V SR 2021-22 Page no 3 ] 75 mm
26
153
3978
... More
code09 - ELECTRO FUSION TEE [BWSSB-V SR 2021-22 Page no 3 ] 63mm
4
210
840
... More
code10 - ELECTRO FUSION TEE [BWSSB-V SR 2021-22 Page no 3 ] 75mm
10
306
3060
... More
code11 - ELECTRO FUSION TEE [BWSSB-V SR 2021-22 Page no 3 ] 90mm
5
451
2255
... More
code12 - ELECTRO FUSION ELBOW [BWSSB-V SR 2021-22 Page no 3 ] 63mm
2
121
242
... More
code13 - ELECTRO FUSION ELBOW [BWSSB-V SR 2021-22 Page no 3 ] 75mm
2
246
492
... More
code14 - ELECTRO FUSION REDUCER [BWSSB-V SR 2021-22 Page no 4] 90 x 75 mm
10
504
5040
... More
code15 - ELECTRO FUSION REDUCER [BWSSB-V SR 2021-22 Page no 4] 75 x 63 mm
2
240
480
... More
code16 - Supplying of Electro fusion End Cap with pipe of 0.2 m length[BWSSB-V SR2021-22 Page no 4] 63mm dia
15
81
1215
... More
code17 - Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including testing for water tightness, with all lead and commissioning. (contractor will make his own arrangements for procuring water for testing) For Medium Duty GI pipe [BWSSB-V SR 2021-22 Chapter No: 13 Item No: 1.1,1.4,Pg No-142]
20
844
16889.6
... More
code18 - Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments [BWSSB-V SR 2021-22 Chapter No: 15 Item No: 27.3,Pg No-162]
12
1550
18600
... More
code19 - Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS- 1865 and of grade GGG 40/50, shaft of stainless steel, wedge fully rubber lined with EDPM seals of NBR and the valves should be vacum tight and 100% leak proof with face to face dimensions as per IS 14846-2000 only. The stem sealing should be with toroidal sealing rings (minimum 2 “ O “ rings). Body and bonut should be coated with Electrostatically applied Epoxy Powder Coating with minimum coating thickness of 250 micron both inside and outside. The rate is inclusive of cost of valves, T.P set, galvanized bolts & nuts and rubber insertions etc. but excluding earth work. (Note: TP set should be considered only for DI pipes estimate. For MS pipes estimates, TP sets cost of corresponding dia shall be deducted from the SR rates of valves and provision for corresponding dia MS flanges should be made in the estimate.) [BWSSB -V SOR 21-22 P-71 25 B073B,Pg No-72] 80mm dia
6
8013
48078
... More
code20 - Supplying and fixing of fixed height surface box H-4057 MD-KU with PP 40% GF Lid, Housing of PA+, Locking clip of PP with Notched bolt M 12 x 130 hexagon head A2-70 for service connection valves, design derived from DIN 4057, Should be suppied with support tile I (FSL, FSS ,SI) ,Should be able to receive class AA traffic loads [BWSSB-V SR 2021-22 Chapter No: 3 B116A Item No: 52]
12
2731
32772
... More
code21 - Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5 m. Including cost of all labour complete as per specifications [CSR 2021-22 VOL-1 Page no 7 item no 1.10]
31
122
3782
... More
code22 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness,well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) (M10) Using 40 mm nominal size graded crushed coarse aggregates.(CSR VOLUME -III SR (Page no A67 Item No :2.1.3 )
57.285
6152
352417.32
... More
code23 - Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge & MoRTH specification 804 [CSR Vol-III 2021-22, Chapter No: 1, Item No: 4 & page No-151 MoRTH 804]
1
9000
9000
... More
code24 - Supply and delivery of Woltman model with removal mechanism water meters confirming to ISO 4064 part I,II,III class B or IS 779 and IS 2373 with life cycle test certificate from FCRI/ NABL accredited lab. The water meters shall have magnetic drivers or mechanical drivers and shall be versatile for installation in any position. The meters shall be hydrodynamically, hydrostatically balanced. The runner, runner chamber, pointer of the meter shall be as per ISO 4064 class B specification. Dry dial excavated counter housing fully protected against flooding ensuring easy reading in all climates. Note: the above rates are basic rates inclusive of transportation charges, earth work excavation, labour charges, cutting and threading, conveyance, welding and hire charges for tools and plants ets., complete (KRDWS&S SOR - 2019-20 , It.No.15.40))
1
19451
19451
... More
code25 - Cutting road surface for pipeline, trenches and disposing of the excavated stuff directed Including barricading danger, lightning, etc. In the classification for , Cutting cement concrete road surface by machine cutting to demarcate the each width of the surface [CSR VOL V 2021-22 Chapter No:2 SOR code A105C, Page No-63 ]
7.245
951
6889.995
... More
code26 - Cutting in Asphalt Road Surface to demarcate the trench width of the surface [CSR VOL V 2021-22 Chapter No:2 SOR code A105B, Page No-63 ]
3.105
891
2766.555
... More
code27 - Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work. UNI S0R 2021-22 Chapter No: 1 Item No: 1.6.1]
62.1
371
23039.1
... More
code28 - Providing & fixing electro fusion saddle comply with Bs EN12201 -3:2011, PN-12.5 rating and food grade raw material as per BS 6920 with material of construction PE 80 or PE 100 and colour of fitting - Blue/Black for water applications, EF tappinB saddle is V-Regarding type.Designed to fuse at a fusion voltage of 40 volt Ac. EF tapping saddle shall have moulded SS/Brass metal female threaded outlet. EF tapping saddle is fused by using a top loading piller type pressure exertin8 150ON (150 kg appn.) top load on EF saddle. Fusion tlme is 170 secs and cooling time is 10mins, Exerted pressure shoud be removed after completing the 10 mins cooling time. 63x20,75x20,90x20,110x20,140x20 .Including cost of all materials, labour, transportation and other incidental charges incur during the execution of work and as per directions of Engineer incharge of work.For 20mm connections (2nd Corrigendum - Volume.5 schedule of Rates we.f 7.06.2022, Itno.K210)
115
350
40250
... More
code29 - Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including testing for water tightness, with all lead and commissioning. (contractor will make his own arrangements for procuring water for testing) (For Heavy Duty GI pipe:) [CSR VOL V 2021-22Chapter No:13 SOR code N010 B,N010 D Page No-142 ]
69
320
22102.08
... More
code30 - Providing and fixing 3 layer PP-R (Poly Propylene Random Copolymer) pipes confirming to IS.15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply, including all PP-R plain and brass threaded polypropylene random fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes testing of joints complete as per direction of Engineer-In- Charge. [CSR VOL V 2021-22Chapter No:63.2 SOR code ,B170 B Page No-81 ]
230
180
41400
... More
code31 - Flow control Valve 5LPM/10LPM/15LPM: Providing & fixing Flow control Valve using food grade materials SS 316 ball/1/2*[15mm including cost of all materials,labour charges HOM & Testing completes as per following specification] [CSR VOL V 2021-22Chapter No:13 SOR code N090B Page No-143 ]
115
255
29325
... More
code32 - Supplying and fixing Multijet class B inferential type, AMR compatible water meters with IP 68 protection totalizer confoming to IS 779 with its latest amendments of following size to service connections including conveying and fixing of necessary G.I. specials with appurtenances. complete, with all lead and lift. [CSR VOL V 2021-22 Chapter No:3 SOR code B118B ,Page No-79 ]
115
2645
304175
... More
code33 - Supply and fixing of HDPE water meter box with locking arrangement to protect the water meter of Class ‘B’ Multijet type of size 15 to 32 mm including HDPE box with base dia 300mm x lid dia 200mm x height 250mm with openable lid and the cover is buried below GL with lid flush with GL including earth work excavation for 600mm x 600mm and base sand filling for 100mm thick over which the cover is placed and enclosed by PCC 1:2:4 using 12-20mm BG jelly for an height of 150mm and refilling with excavated earth for balance 100mm height, disposal of excess earth with all lead and lifts with appurtenances complete as per drawing enclosed. [BWSSB-V SR 2021-22 Chapter No: 11 Item No:23]
115
509
58535
... More
code34 - Supply of PPR Female Threated Coupling conforming to IS 15801-2008 and DIN Standard 8077/8092 (B191B)2nd addendum vide Ref 222 CE Office,BWSSB 2022-23 Dt:07/06/2022
115
66
7590
... More
code35 - Supply of PPR End cap conforming ro IS 15801-2008 and DIN Standard 8077/8092 (B181B)2nd addendum vide Ref 222 CE Office,BWSSB 2022-23 Dt:07/06/2022
115
11
1265
... More
code36 - Supply of PPR Union conforming to IS 15801-2008 and DIN Standard 8077/8092 (B184A) 2nd addendum vide Ref 222 CE Office,BWSSB 2022-23 Dt:07/06/2022
115
58
6670
... More
code37 - Supply of PPR Gate Valve conforming to IS 15801-2008 and DIN Standard 8077/8092 (B196A) 2nd addendum vide Ref 222 CE Office,BWSSB 2022-23 Dt:07/06/2022
115
146
16790
... More
code38 - Providing and fixing brass bib cock of approved quality [CSR VOL II 2021-22 ,Item No: 13.2.2,Page No- 115 ]
115
345
39675
... More
code39 - Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M20 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 m3 capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including construction joints, primer, sealant , curing of concrete slabs for 14- days, and water finishing to lines and grade as per drawing and technical specification clause 1501 with all lead, lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments etc., complete. as per the directions of the Engineer-in-charge of the work. [CSR VOL III 2021-22 Item No:20.28 MORTH code 1501 ,Page No-137 ]
13.455
6152
82775.16
... More
code40 - Supply and fixing of RCC demarcation stones of 30cms x 15cms and 90cms using 1:2:4 CC and 6mm dia rods for verticals and stirrups and rendered smooth,including engraving letters "KWD and ARROW" 6mm deep on the top including fixing demarcation stones 45cm below ground level and CC 1:3:6 ,5cms height with 8cms offset around the stone and curing for 10 days including earthwork in all types of soils with al lead and lift:(STAND POST) [CSR VOL V 2021-22 Chapter No:3 SOR code B130A ,Page No-80 ]
115
440
50600
... More
code41 - Supplying at site pot rest slab of 0.45m x 0.3m x 0.2m in CC 1:2:4 proportion with granite metal 20mm and down size including plank centering and form work,machine mixing,tamping including plastering 20mm thick in C.M 1:4 proportion with all lead as per specification with appurtenances,complete WSSB-2021-22 Vol -5 Page No.59(Item code:B130D)
115
391
44965
... More
code42 - Wall painting with acrylic, emulsion, paint of approved brand and manufacture to give in even shade Two coats on new work after thoroughly brooming the surface to remove all dirt,dust, drops and foreign matters, including repairing the surface even and sandpaper, smooth coat of materials, labour complete As per specifications and as per directions of engineer in charge [CSR 2021-22 Vol-2 Item No:8.39 ,Page No-48 ]
113.85
95
10815.75
... More
code43 - Providing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to gie an even shade
11500
1
13800
... More
code44 - Earth work excavation by manual means for drains,canals, waste weir,draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work.. Including cost of all materials, labour, transportation and other incidental charges incur during the execution of work and as per directions of Engineer incharge of work. In all kinds of soils Depth up to 1.5 m [ CSR 2021-22 ,Vol-I, Chapter No: 1 Item No: 1.4.1]
4.5
186
837
... More
code45 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Including cost of all materials, labour, transportation and other incidental charges incur during the execution of work and as per directions of Engineer incharge of work. Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates [ CSR Vol-I 2021-22, Chapter No: 2 Item No: 2.1.3]
0.45
5554
2499.3
... More
code46 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, plywood / steel formwork, cost of all materials of quality, labour, Usage charges of machineries, curing and all the other appurtenances required to complete the work as per technical specifications. ( The cost of steel reinforcement shall be paid separately) .Including cost of all materials, labour, transportation and other incidental charges incur during the execution of work and as per directions of Engineer incharge of work.P&L PCC 1:1.5:3 (20mm aggregates) [WS&UW CSR 2021-22, Vol-V,Chapter No:9,ItemNo:1.2,SOR CODE:I030B]
1.49
6280
9357.2
... More
code47 - Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) [CSR 2021-22, Vol-II, Chapter No.11, Item No:11.32][Approved Rate]
0.0894
61864
5530.6416
... More
code48 - Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) [ CSR 2021-22, Vol :V , Chapter No: 14,Item No:1,SOR CODE:O010] 0-50 mts
50
347
17350
... More
code49 - Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) [ CSR 2021-22, Vol :V , Chapter No: 14,Item No:1,SOR CODE:O010] 50-100 mts
50
442
22100
... More
code50 - Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) [ CSR 2021-22, Vol :V , Chapter No: 14,Item No:1,SOR CODE:O010] 100-150mts
50
456
22800
... More
code51 - Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) [ CSR 2021-22, Vol :V , Chapter No: 14,Item No:1,SOR CODE:O010] 150-200mts
50
536
26800
... More
code52 - Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes, collars, cap etc., complete ) [ CSR 2021-22, Vol :V , Chapter No: 14,Item No:1,SOR CODE:O010] 200-250mts
50
634
31700
... More
code53 - Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, material and conforming to IS 1387-1993 and manufactured by basic open hearth electric or basic oxygen process in random length of 5-7m both ends.threaded conforming to IS 554-1985 one end fixed with socket conforming to IS 4270- 2001 and the other end with screwed pipes all shall be responsibaly free from defects. The tubes shall be responsible straight end should be with ISI marking weighing 25.10kg/m.prices include Collar-Medium duty. [CSR 2021-22, Vol :V , Chapter No: 14,Item No:32,SOR CODE:O160A] BW
20
1933
38660
... More
code54 - Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, material and conforming to IS 1387-1993 and manufactured by basic open hearth electric or basic oxygen process in random length of 5-7m both ends.threaded conforming to IS 554-1985 one end fixed with socket conforming to IS 4270- 2001 and the other end with screwed pipes all shall be responsibaly free from defects. The tubes shall be responsible straight end should be with ISI marking weighing 25.10kg/m.prices include Collar-Medium duty. [CSR 2021-22, Vol :V , Chapter No: 14,Item No:32,SOR CODE:O160A] BW
10
2222
22229.5
... More
code55 - Providing and laying at site of work MS casing caps as per IS 1239 (partII) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensions of caps and colars shall be strictly as per IS 1239 (Part-II) 1982 with all amendments including cost of material and labour charges for fixing, if any etc. complete with all lead and lifts and as directed by the Engineer in charge. [ CSR 2021-22, Vol :V , Chapter No: 14,Item No:34,SOR CODE:O180A]
1
164
164
... More
code56 - Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications,as per necessary ammendments and instructions of engineer incharge of work. For 3 HP (KRDWS&S V-5 SOR - 2021-22 Pg. No.160, It.No.16.7 item no 17.6 )
1
69258
69258
... More
code57 - Supply and Delivery of galvanized mild steel tubes of 6mtr standard length heavy duty (C Class ) as per IS 1239(part-1) 1990 with latest amendments with ISI Mark (one end fitted with heavy duty collar and other end fitted with protective cover )
30
3050
91500
... More
code58 - Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments. 1x3x4 m2 (V-5SOR - 2021-22 Pg. No.161, It.No.22.3)
330
165
54450
... More
code59 - Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments.Size 50 mm
1
1250
1250
... More
code60 - Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments. Size 50 mm
1
1275
1275
... More
code61 - Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog Voltmeter 1ni with Phase selector switch, Isolating switch OUTGOING for Main Electrical Pump: 1 No. MCB 1 No. DOL of S/D Starter suitable for respective HP 1 No. Electrcal Protection Like single Phase preventor, under voltage over Volage, under current over current & dry run protection suitable for the pump described above 1 no Indoor type (V-5SOR - 2019-20 Pg. No.110, It.No.12.07)
1
14250
14250
... More
code62 - Labour charges for erection of outdoor type panel board and meter board units with all necessary materials and labour, tools and equipments including providing cement concrete foundation bed etc., complete as per specification, with testing of as per instructions of engineer incharge of work. (V-5 SOR - 2021-22 Pg. No.163, It.No.40)
1
1350
1350
... More
code63 - Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning of the same at the location of respective pump sets. (V-5SOR - 2021-22 Pg. No.162, It.No.31)
1
550
550
... More
code64 - Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges,tools and equipments etc., involved in the job as per specifications, with necessary tests as per specifications, with testing of as per instructions of engineer incharge of work. (KRDWS&S SOR - 2019-20 Pg. No.110, It.No.12.10)
1
6150
6150
... More
code65 - Fabricating, Supplying and mounting MS Box Made out ….. SWG Suitable for Floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arreangement, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., complete (16 SWG). Including cost of all materials, labour, transportation and other incidental charges incur during the execution of work and as per directions of Engineer incharge of work. PWD ELESR 2022-23 P-30, I-5.42.2
19500
-
7410
... More
code66 - Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 75x75x6mm . Including cost of all materials, labour, transportation and other incidental charges incur during the execution of work and as per directions of Engineer incharge of work. PWDELESR 2022-23 P No 30, I No 5.41.3
2
497
994
... More
code67 - Supplying 6A flush/projected type socket and a 6 amps flush/projected type SP switch either surface/flush mounting in a existing gang box or in a 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required as per IS 1293 and IS 3654. 6Amps 3/5 Way..Including cost of all materials, labour, transportation and other i ncidental charges incur during the execution of work and as per directions of Engineer incharge of work. PWDELESR 2022-23 Page No: 09, Item No:3.1.2
1
143
143
... More
code68 - Wiring for lighting/power circuit using one of PVC insulated 1100v grade, multistrand Copper conductor single core cable in open or consealed system of wiring as per IS-694:1990 & Confirming to the attached GTP of Group B 4.0 sqmm .Including cost of all materials, labour, transportation and other incidental charges incur during the execution of work and as per directions of Engineer incharge of work. PWDELESR 2022-23 Page No: 6, Item No:2.3.4
15
59
885
... More
code69 - Supplying & fixing of porcelain fuse channel with cut out on existing wooden panel using necessary nuts, bolts and washers etc" B) 32 Amps.Including cost of all materials, labour, transportation and other incidental charges incur during the execution of work and as per directions of Engineer incharge of work. PWDELESR 2022-23 Page No: 25, Item No:5.7.2
3
200
600
... More
code70 - Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3with Short circuit breaking capacity of 10 K and complete wiring as required 50-63 Amps TPN.Including cost of all materials, labour, transportation and other incidental charges incur during the execution of work and as per directions of Engineer incharge of work. PWDELESR 2022-23 Page No: 27, Item No:5.17.9
1
2399
2399
... More
code71 - Supplyng and wiring Earth Leakage Miniature Circuit Breaker (ELMCB) 240 / 450 V upto 300 mA sensitivity on Existing wood / panel board 32-40 Amps 4 pole.Including cost of all materials, labour, transportation and other incidental charges incur during the execution of work and as per directions of Engineer incharge of work. PWDELESR 2022-23 Page No: 28, Item No:5.20.3
1
2826
2826
... More
code72 - Supplying and Fixing a shunt capacitor of …. KVAR capacity with necessary clamps, bolts, and nuts on existing wooden r metal board including banking of more than one capacitor upto 5 KVAR.Including cost of all materials, labour, transportation and other incidental charges incur during the execution of work and as per directions of Engineer incharge of work. PWDELESR 2022-23 Page No: 80, Item No:14.15.1
6
210
1260
... More
code73 - Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C. Group AIncluding cost of all materials, labour, transportation and other incidental charges incur during the execution of work and as per directions of Engineer incharge of work. PWDELESR 2022-23 Page No:29, Item No:5.38
2
464
928
... More
code74 - Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipments on the meter board using 40mm dia 2.90 thick GI pipe2.5 Mtr long buried in a pit … The pit should be filled with equal proportion of salt and charcoal 150mm alround the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per ISI specification 7.3.3. of IS 732 using 12mm dia bolts, nuts, washers and check nuts etc, the pipe shall have 16 through holes of 122 mm dia. Including cost of all materials, labour, transportation and other incidental charges incur during the execution of work and as per directions of Engineer incharge of work. PWDELESR 2019-20 Page No: 40, Item No:6.1
1
2999
2999.7
... More
code75 - Supplying of 1.1 KV LT UG cable having alluminium conductor PVC insulated, sheathed, extruded inner sheathed, galvanized, steel strips (except 2C x 10 Sq.mm wire armoured) as per IS-3975 : 1990 & extruded PVC Outer Ssheathed armoured cable as per IS-1554 Part-1:1988 & Confirming to the attached GTP of Group-B 4 core 10 sqmm.Including cost of all materials, labour, transportation and other incidental charges incur during the execution of work and as per directions of Engineer incharge of work. PWDELESR 2019-20 Page No: 40, Item No:6.4.2
30
130
3900
... More
code76 - Labour charges for laying of 1.1 K V class UG cable in existing in existing trench GI pipe/stoneware pipe /on wall /on pole as required, In exIsting trench/duct. 6 Sqmm to 16 sqmm.Including cost of all materials, labour, transportation and other incidental charges incur during the execution of work and as per directions of Engineer incharge of work. PWDELESR 2019-20 Page No: 41, Item No:6.5.1
20
11
237.6
... More
code77 - On wall/structure a)6 sqmm to 16sqmm.Including cost of all materials, labour, transportation and other incidental charges incur during the execution of work and as per directions of Engineer incharge of work.
20
30
600
... More
code78 - Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc, complete (As per civil SR KSRB 1- 2, P7) In soil (Hard) .Including cost of all materials, labour, transportation and other incidental charges incur during the execution of work and as per directions of Engineer incharge of work. PWDELESR 2019-20 Page No: 41, Item No:6.6.2
20
102
2040
... More
code79 - Supplying and fixing of class -A (medium) GI pipe of wall thickness not lessthan 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV class (a) 40mm..Including cost of all materials, labour, transportation and other incidental charges incur during the execution of work and as per directions of Engineer incharge of work. PWDELESR 2019-20 Page No: 41, Item No:6.9.1
8
335
2680
... More
code80 - Supplying and fixing L.T cast iron pot heads suitable for 1.1 K V class UG cable filled with necessary bitumen / insulation compound with terminals, clamps bolts nuts and washers etc, 10 sqmm.. Including cost of all materials, labour, transportation and other incidental charges incur during the execution of work and as per directions of Engineer incharge of work. PWDELESR 2019-20 Page No: 41, Item No:6.10.1
2
260
520
... More
code81 - Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas/spacers etc.,GI Wire c) 8 SWG. Including cost of all materials, labour, transportation and other incidental charges incur during the execution of work and as per directions of Engineer incharge of work. PWDELESR 2019-20 Page No: 44, Item No:6.18.3
12
19
228
... More
code82 - Supplying, fixing and wiring 10 to 40 Amps three phase 4 wire class-1 Accuracy Energy MeteIncluding cost of all materials, labour, transportation and other incidental charges incur during the execution of work and as per directions of Engineer incharge of work. PWDELESR 2022-23 Page No: 29, Item No:5.35
2
5125
10250
... More
code83 - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work [CSR 2021-22,Vol-I, Chapter No: 1,Item No: 1.14] In all kinds of soils Depth upto 3 m
22.8188
73
1665.7724
... More
code84 - Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work [CSR 2021-22,Vol-I, Chapter No: 1,Item No: 1.14] In ordinary/soft rock without blasting upto 1.5 m depth
9.7795
272
2660.024
... More
code85 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, plywood / steel formwork, cost of all materials of quality, labour, Usage charges of machineries, curing and all the other appurtenances required to complete the work as per technical specifications. ( The cost of steel reinforcement shall be paid separately).PCC 1:2:4 using 40 mm aggregate CSR -V 2021-22 Chapter No:8 Page No:116 Item No: 1.2 (SOR Code:I030A)
1.9987
6539
13069.4993
... More
code86 - Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes , labour, strutting, plywood / steel form work , Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement to be paid separately) (Minimum cement content: 340 kgs (6.80 bags)). RCC M25 Design Mix with 20mm aggregate for footings, rafts and combind footing etc.with smooth finishing the exposed faces in CM 1:4, 12mm thick etc. [WS&UW CSR 2021-22, Vol :V , Chapter No: 8, Item No:2.2, SOR CODE:H020B]
6.5965
9180
60555.87
... More
code87 - Providing and laying in position Reinforced cement concrete for columns, braces and ring beam above ground level. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes with plastering and smooth finishing the exposed faces in cement mortar 1:3, 12 mm thick, labour,centering, scaffolding, staging, strutting, plywood/ steel form work , Usage charges of machinery, curing and all other appurtenances required to complete the work as per design and technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately). (Minimum cement content: 360 kgs (7.20 bags)). RCC M30 Design Mix with 20mm aggregate for level 6m to 9m height. [WS&UW CSR 2021-22, Vol :V, Chapter No: 8, Item No:3.2, SOR CODE:H030B]
5.886
15662
92186.532
... More
code88 - Providing and laying in position Reinforced cement concrete for shell portion, bottom dome / slab and ribs over the staging. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes with plastering and smooth finishing the exposed faces in cement mortar 1:3, 12 mm thick and CM plastering 1:3 proportion 20mm thick for inside with an admixture of water proof compound of requisite proportion of approved quality, labour,centering, scaffolding, staging, strutting, plywood/ steel form work , Usage charges of machinery, curing and all other appurtenances required to complete the work as per design and technical specifications.(Contractor will make his own arrangements for procuring water for testing). (The cost of steel reinforcement, dowel bars to be paid separately). (Minimum cement content: 360 kgs (7.20 bags)). M30 Design Mix with 20mm aggregate for level and 6 to 9 m height. [WS&UW CSR 2021-22, Vol :V, Chapter No:8, Item No:5.2, SOR CODE:H050B]
7.0393
23551
165782.5543
... More
code89 - Providing and laying in position Reinforced cement concrete for side walls of water tank over the staging above the ground level. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes with plastering and smooth finishing the exposed faces in cement mortar 1:3, 12 mm thick and CM plastering 1:3 proportion 20mm thick for inside with an admixture of water proof compound of requisite proportion of approved quality, labour,centering, scaffolding, staging, strutting, plywood/ steel form work , Usage charges of machinery, curing and all other appurtenances required to complete the work as per design and technical specifications.(Contractor will make his own arrangements for procuring water for testing). (The cost of steel reinforcement, dowel bars to be paid separately). (Minimum cement content: 360 kgs (7.20 bags)). RCC M30 Design Mix with 20mm aggregate for level and upto 6 - 9 mheight. [WS&UW CSR 2021-22, Vol :V, Chapter No:8, Item No:6.2,SOR CODE:H060B]
5.4294
24815
134730.561
... More
code90 - Providing and laying in position Reinforced cement concrete for top dome of water tank over the staging above the ground level. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes with plastering and smooth finishing in cement mortar 1:3, 12 mm thick for both inside and outside surface, labour,centering, scaffolding, staging, strutting, plywood/ steel form work , Usage charges of machinery, curing and all other appurtenances required to complete the work as per design and technical specifications. (The cost of steel reinforcement, dowel bars to be paid separately). (Minimum cement content: 360 kgs (7.20 bags)) RCC M30 Design Mix with 20mm aggregate for level and upto 6-9 m height. [WS&UW CSR 2021-22, Vol :V, Chapter No:8, Item No:7.2,SOR CODE:H070B]
5.3435
24019
128345.5265
... More
code91 - Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) [WS&UW CSR 2021-22, Vol-II,Chapter No.11 Item No:11.32, Page- 84][Approved Rate ]
3.24
61864
200439.36
... More
code92 - Labour charges for fabricating mild steel or torsteel bars of all sizes for reinforcement for RCC works including conveying steel to work spot with all lead including cleaning, straightening, bending, fabricating, placing in position and tieing as per design including cost of binding wire, hoisting etc. with all lifts etc. complete (excluding the cost of steel) [ BWSSB VOL- 5 PAGE NO 111 ITEM NO 10 SOR CODE H100) Staging 6 to 9 m height
3.24
11557
37444.68
... More
code93 - Providing and fixing MS ladder between landings, 45 cms wide using angle iron of specified sizes, 20mm MS bars at 25 cms. centre to centre, with necessary supports of same angle iron etc. as directed, including hand railing on both sides with 25mm dia. GI pipes with angle iron props at 2 mtrs. intervals and 0.5M heigh, including fixing in ground with CC 1:2:4 and two coats of anticorrosive bituminous paint etc. with all lead and lifts etc. complete with:[WS&UW CSR 2021-22, Vol :V , Chapter No:8, Item No:11.1,SOR CODE:H110A]
12
4323
51876
... More
code94 - Ladder inside the container: Providing anodized aluminium ladder using 65mm x 32mm x 3.0mm ‘C’ section for ladder side channel x 25mm dia., flutal pipe for Rungs at 250mm c/c ladder fixed at an angle of 70 degrees to horizontal including necessary 25mm dia., G.I. shutters with necessary G.I. fasteners for bracing the ladders to the Tank walls to prevent buckling of the ladder with necessary (M-15) bed for embedding the ladder bottom complete (2nd Addendum for Volume-S Schedule of Rates w.e,f 07.06.2022 ,Item no 2,SOR Code H270)
3.5
5100
17850
... More
code95 - Providing and fixing RCC final and ventilators as per approved design and specifications with form works and protected with wire mesh. The plinth to be of RCC circular pillars and canopy with an ornamental finish at top. The first 22.5 cms height to be covered with RCC panelling as per detailed drawings etc. with all lead and lifts and excluding reinforcement steel. For over head tanks upto 2.5 lakhs capacity. [WS&UW CSR 2021-22, Vol :V, Chapter No:8, Item No:12.1, SOR CODE:H120A]
1
5750
5750
... More
code96 - Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. including painting with anticorrosive approved paint etc. complete including all lead and lifts etc.[WS&UW CSR 2021-22, Vol :V, Chapter No:8, Item No:13, SOR CODE:H140A]
1
2111
2111
... More
code97 - Providing and fixing gauge with iron sheet or enamelled guage plate of 3mm to 4mm thick, 0.23 M width with copper floats indicators and flexible nylone wires, painting figures with approved enamel paint etc. with all lead and lifts, complete - Enamelled guage plate for 2.5m Depth.Including cost of all materials, labour, transportation and other incidental charges incur during the execution of work and as per directions of Engineer incharge of work.[WS&UW CSR 2021-22, Vol :V, Chapter No:8, Item No:14.7, SOR CODE:H150H]
1
3987
3987
... More
code98 - Supplying and fixing DI/CI puddle flanges conforming to IS 7181-1986 with latest ammendments., in position for RCC walls including hoisting and conveying them to work spot with all lead and lifts etc. complete .[WS&UW CSR 2021-22, Vol :V , Chapter No: 8, Item No:15.1, SOR CODE:H160A]
4
1526
6104
... More
code99 - Supplying, Laying and Jointing Cast Iron (CI) double flanged pipes true to line / hoisting of DI flanged pipe in position and aligning to correct plumb, including cost of jointing materials, conveying to work spot with all lead and lifts etc.complete. For double flanged CI pipes of 80mm dia. [WS&UW CSR 2021-22, Vol :V, Chapter No: 8,Item No:16.1,SOR CODE:H170A] 100 mm dia for outlet
66
2205
145530
... More
code100 - Providing 80 mm dia Bell mouthed pipes (flanged) confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete. (RDW&S SR 2019-20 Ch. No. 15, It.no.15.57)
1
320
320
... More
code101 - Suppling Ductile Iron Push on special confirming to IS 9523:2000 - All Double Socket Duck Foot DI Bends:[WS&UW CSR 2021-22, Vol :V, Chapter No: 8, Item No:24.1, SOR CODE:H260A]
4
2365
9460
... More
code102 - Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS 1865 and of grade GGG 40/50, shaft of stainless steel, wedge fully rubber lined with EDPM seals of NBR and the valves should be vacum tight and 100% leak proof with face to face dimensions as per IS 14846-2000 only. The stem sealing should be with toroidal sealing rings (minimum 2 “ O “ rings). Body and bonut should be coated with Electrostatically applied Epoxy Powder Coating with minimum coating thickness of 250 micron both inside and outside. The rate is inclusive of cost of valves, T.P set, galvanized bolts & nuts and rubber insertions etc. but excluding earth work. [WS&UW CSR 2021-22, Vol :V , Chapter No:3, Item No:25.2, SOR CODE:B073B] For Suilce Valve of PN -10.0 and 80mm
1
8013
8013
... More
code103 - Providing two coats of water proof cement painting with approved colour and shade over one coat of primer including scrapping the surface with wire brushes etc. before removal of scaffolding for new RCC over head tanks and cleaning of paint stains wherever necessary with all lead and lifts etc. complete for:: Tanks staging above 6 Mtrs. and upto 9 Mtrs. [WS&UW CSR 2021-22, Vol :V, Chapter No:8, Item No:20.2, SOR CODE:H210B]
273.7282
153
41880.4146
... More
code104 - Providing plastering in CM 1:3 proportion for RCC over head tanks,including smooth finishing,minimum 2% of approved quality water proofingcompound, curing, scaffolding and giving satisfactory water proof testing as per direction etc. complete with all lead lifts etc. for side walls, shell portions, bottom doom, bottom slab and ribs etc. for: 12mm thick for exposed surfaces 6.0 to 9.0 Mtr. staging. [WS&UW CSR 2021-22, Vol :V , Chapter No: 8, Item No:19.2, SOR CODE:H200B]
273.7282
299
81844.7318
... More
code105 - Painting with synthetic enamel paint of approved brand andmanufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in- charge. [PWD & SRB 2021-22 ,Vol : II, Chapter No: 8 Item No: 8.40]
3.75
90
337.5
... More
code106 - Painting new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade complete as per specifications. (“ii) English and Roman [PWD & SRB 2021-22 ,Vol : III, Chapter No: 8 Item No: 8.4]
1000
-
700
... More
code107 - Supplying and fixing lightening arrestor with aluminium strip 25mm x 3mm size including finial and grounding, aluminium strip to be embeded in one of the columns in and independent GI conduit of 40mm dia. pipe suitably jointed by collars with all specials with all lead and lifts etc. complete for: [WS&UW CSR 2021-22, Vol :V, Chapter No: 8, Item No:17.2, SOR CODE:H180B]
1
8606
8606
... More
code108 - Supplying and fixing 40mm dia. GI pipe medium duty pipes hand railing 3 rows fixed to RCC 1:2:4 vibrated post of 150x150mm at bottom and 100x150mm at top, placed at 2 Mtrs. intervals for a height of 750mm including curing, painting GI pipes with two coats of anticorrosive steel paint over a primer coat etc. with all lead lift etc. (The rate per meter is for 3 rows of GI pipes and RCC post) [WS&UW CSR 2021-22, Vol :V , Chapter No: 8, Item No:22,SOR CODE:H230A]
49.6
1098
54460.8
... More
code109 - Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments.[WS&UW CSR 2021-22, Vol-V,Chapter No: 15, Item No: 27.3, SOR code P250C]
1
1750
1750
... More
code110 - Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work.In Hard Soil - Including cost of all materials, labour, transportation and other incidental charges incur during the execution of work and as per directions of Engineer incharge of work.- Depth up to 1.50m CSR VOLUME -1 SR (Page no 6 Item No :1.6.1 )
180
371
66780
... More
code111 - Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bracing, using sight rails & boning rods at every 100 mm whevere necessary as directed, removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench to the extent required , utilising the available excavated earth locally for the work etc., and all other appurtenances complete in the following strata.In Hard Soil - Including cost of all materials, labour, transportation and other incidental charges incur during the execution of work and as per directions of Engineer incharge of work. - Depth up to 1.50m CSR VOLUME -1 SR (Page no 10 Item No :1.17.1 )
180
194
34920
... More
code112 - Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. Note: Upto 110mm dia Coil shall be used..- .Including cost of all materials, labour, transportation and other incidental charges incur during the execution of work and as per directions of Engineer incharge of work.75mm diameter PE100(PN 8.0 / 6 Kg/cm2 (VOLUME - 5 SR Page no 127 Item No :1.2 SOR Code K070B))
1000
239
239200
... More
code113 - Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5 m.Including cost of all labour complete as per specifications..Including cost of all materials, labour, transportation and other incidental charges incur during the execution of work and as per directions of Engineer incharge of work. lead up to 50 m and lift upto 1.5 m CSR VOLUME -1 SR (Page no 7 Item No :1.10 )
180
122
21960
... More
code114 - Providing 80mm dia air valve conforming to IS 1538 (Part-1 to 22) 1978 with latest amendments
1
3000
3000
... More
code115 - 75 MM ELECTRO FUSION COUPLER CSR-2021-22 Vol-V Page No.3 Item No 95
10
153
1530
... More
code116 - 75 MM ELECTRO FUSION ELBOW CSR-2021-22 Vol-V Page No.3 Item No 97
10
246
2460
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements