Rural Development And Panchayat Raj Department Tender

Code 04 - Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. With All Lead And Lifts As Per The Direction Of Engineer Incharge Of Work

Code 05 - Providing and fixing in position aluminium windows and ventilators as per approved drawings with sliding shutters using three track window frame of size 92x31.75mm bottom section 1.3mm thick, weight 1.07kg/m; sides and top sections 1.3 mm, thick, weight 0.933 kg/m.shutter frame section comprising top and bottom section of size 40mmx18mm, wall thickness 1.25mm. weight 0.417 kg./m. shutter side outer 40mmx18mm. wall thickness 1.25mm. weight 0.417 kg/m, shutter interlock section 40mmx26. 7mm wall thickness 1.1 mm. thick, weight 0.469 kg/m, the shutters mounted on nylon rollers with approved quality of fixtures such as aluminium handles tower bolts etc.; providing and fixing 5.5mm. thick plain glass for shutters fitted with rubber beading all aluminium sections including cutting to required length, joints mitred subdividing the frame tenonned and rivetted, in the assembled frame, stiffened with end clips for corners, angles etc., and fixed to the walls, lintels, floor beams/cills as the case may be, with necessary steel screws, raul plugs or teak wood gatties including cutting masonry or concrete and making good the original surface using cement mortar do- using aluminium section powdered coated to a minimum of 60-70 microns with exterior durable pure polyester grade powder of approved quality. With All Lead And Lifts As Per The Direction Of Engineer Incharge Of Work

Code 06 - Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. With All Lead And Lifts As Per The Direction Of Engineer Incharge Of Work

Code 07 - Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. With All Lead And Lifts As Per The Direction Of Engineer Incharge Of Work

Code 08 - Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. With All Lead And Lifts As Per The Direction Of Engineer Incharge Of Work

Code 09 - Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. With All Lead And Lifts As Per The Direction Of Engineer Incharge Of Work

Code 10 - Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand papersmooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. With All Lead And Lifts As Per The Direction Of Engineer Incharge Of Work

Code 11 - Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. With All Lead And Lifts As Per The Direction Of Engineer Incharge Of Work

Code 12 - Providing wall black boards in CM 1:3 with two coats of black paint including finishing etc., including cost of materials, labour, HOM complete as per specifications. With All Lead And Lifts As Per The Direction Of Engineer Incharge Of Work

Code 13 - KSRB 4-2.12 : Extra for providing throating or drip moulding toR.C.C. chajja with plastering (labour charges only) as per specifications. With All Lead And Lifts As Per The Direction Of Engineer Incharge Of Work

Code 14 - Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete Size of Tile 600x600 mm. With All Lead And Lifts As Per The Direction Of Engineer Incharge Of Work

Code 15 - Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge

Code 16 - Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device(handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid With All Lead And Lifts As Per The Direction Of Engineer Incharge Of Work

Code 17 - Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required -,One urinal basin with 5 litre white P.V.C. automatic flushing cistern. With All Lead And Lifts As Per The Direction Of Engineer Incharge Of Work

Code 18 - Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps. With All Lead And Lifts As Per The Direction Of Engineer Incharge Of Work

Code 19 - Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required- 610x510 mm bowl depth 200 mm. With All Lead And Lifts As Per The Direction Of Engineer Incharge Of Work

Code 20 - Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. With All Lead And Lifts As Per The Direction Of Engineer Incharge Of Work

Code 21 - Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour charges and all lift charges, handling charges including encasing the pipe around to a depth not less than 15 cms with gravel or selected earth available from the excavation etc. complete. 4 Kg/m2: 63mm(weight of pipe -0.465 kg). With All Lead And Lifts As Per The Direction Of Engineer Incharge Of Work

Code 22 - Providing and fixing C.P. brass bib cock of approved quality conforming to IS:893. With All Lead And Lifts As Per The Direction Of Engineer Incharge Of Work

Code 23 - Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. With All Lead And Lifts As Per The Direction Of Engineer Incharge Of Work

Code 24 - Providing and laying 60mm thick factory made cement concrete paverblock of approved shape and colour of M -30 grade made of C&D wasteby block making machine with vibratory compaction laid in requiredpattern and including over 50mm thick compacted bed of coarse sand,filling the joints with fine sand etc. all complete as per the direction ofEngineer-in-charge. With All Lead And Lifts As Per The Direction Of Engineer Incharge Of Work

Code 25 - Concealed Conduit System : Suupplying heavy guage PVC conduit pipe…………mm dia………………..thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binidng wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18 SWG GI fish wire wherever necessary 19/20mm dia 2mm thick. With All Lead And Lifts As Per The Direction Of Engineer Incharge Of Work

Code 26 - Supplying heavy guage PVC Conduit Pipe...…dia……..mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary 19/20mm dia 2mm thick. With All Lead And Lifts As Per The Direction Of Engineer Incharge Of Work

Code 27 - Point Wiring using Copper Wire with switch Supplying and wiring adopting loop system in existing PVC Conduit/casing capping uisng 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 x 1.50 sq.mm Cable confirming to the GTP, with a 6 Amps flush type SP control Switch shall be fixed on the existing plastic sheet/gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block complete for each outlet. Group A Short Point upto 3 Mtr from tapping point to out let via Switch. With All Lead And Lifts As Per The Direction Of Engineer Incharge Of Work

Code 28 - Point Wiring using Copper Wire with switch Supplying and wiring adopting loop system in existing PVC Conduit/casing capping uisng 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 x 1.50 sq.mm Cable confirming to the GTP, with a 6 Amps flush type SP control Switch shall be fixed on the existing plastic sheet/gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block complete for each outlet. Group A Medium Point above 3 Mtr upto 6 Mtr from tapping point to out let via switch. With All Lead And Lifts As Per The Direction Of Engineer Incharge Of Work

Code 29 - Point Wiring using Copper Wire with switch Supplying and wiring adopting loop system in existing PVC Conduit/casing capping uisng 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 x 1.50 sq.mm Cable confirming to the GTP, with a 6 Amps flush type SP control Switch shall be fixed on the existing plastic sheet/gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block complete for each outlet. Group A Long Point above 6 Mtr upto 10 Mtr from tapping Point to out let via switch. With All Lead And Lifts As Per The Direction Of Engineer Incharge Of Work

Code 30 - Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete. 1-3 Way. With All Lead And Lifts As Per The Direction Of Engineer Incharge Of Work

Code 31 - Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete. 16 Way. With All Lead And Lifts As Per The Direction Of Engineer Incharge Of Work

Code 32 - Supplying and fixing superior quality modular switch mounting polycorbonate plate with necessary supporting back plate with required no's of machine screwes, bolts, nuts etc., complete on the existing metal/ PVC box. " A Group 1 to 3 Module. With All Lead And Lifts As Per The Direction Of Engineer Incharge Of Work

Code 33 - Supplying and fixing superior quality modular switch mounting polycorbonate plate with necessary supporting back plate with required no's of machine screwes, bolts, nuts etc., complete on the existing metal/ PVC box. " A Group 16-18 Module. With All Lead And Lifts As Per The Direction Of Engineer Incharge Of Work

Code 34 - Supplying and fixing of modular switch/ Socket/ stepped electronic fan regulator/ dimmer/ telephone socket etc on existing modular switch plate.Using Group " A" Materials 6 Amps one way. With All Lead And Lifts As Per The Direction Of Engineer Incharge Of Work

Code 35 - Supplying and fixing of modular switch/ Socket/ stepped electronic fan regulator/ dimme/ telephone socket etc on existing modular switch plate.Using Group " A" Materials 6 Amps Two way Switch. With All Lead And Lifts As Per The Direction Of Engineer Incharge Of Work

Code 36 - Supplying and fixing of modular switch/ Socket/ stepped electronic fan regulator/ dimmer/ telephone socket etc on existing modular switch plate.Using Group " A" Materials Stepped Fan Regulator. With All Lead And Lifts As Per The Direction Of Engineer Incharge Of Work

Code 37 - Supplying and fixing of modular switch/ Socket/ stepped electronic fan regulator/ dimme/ telephone socket etc on existing modular switch plate.Using Group " A" Materials TV/ Telephone socket. With All Lead And Lifts As Per The Direction Of Engineer Incharge Of Work

Code 38 - Wiring for lighting/Power circuit uisng one of FRLS PVC insulated 1100 V Grade, multistrand Copper conductor single core with low conducter resistance single core in open or cncealed system of wiring as per IS-694: 1990 & confirming to GTP of Ground-B. 1.5 sqmm. With All Lead And Lifts As Per The Direction Of Engineer Incharge Of Work

Code 39 - Wiring for lighting/Power circuit uisng one of FRLS PVC insulated 1100 V Grade, multistrand Copper conductor single core with low conducter resistance single core in open or cncealed system of wiring as per IS-694: 1990 & confirming to GTP of Ground-B. 2.5 sqmm. With All Lead And Lifts As Per The Direction Of Engineer Incharge Of Work

Code 40 - Supplying and fixing/Replacing of 6/16/32Amps electrical accessories on exisisting switch board. 32Amps Bakelite DP Group 'A'. With All Lead And Lifts As Per The Direction Of Engineer Incharge Of Work

Code 41 - Supplying and fixing of slim box fitting, made out of CRCA sheet metal body with locking type holder completely wired excluding Ballast & Flouresent Tube. 1x 4'-tube light fitting. With All Lead And Lifts As Per The Direction Of Engineer Incharge Of Work

Code 42 - Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling /rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps- On wall/ Ceiling/Rafter/Girders. With All Lead And Lifts As Per The Direction Of Engineer Incharge Of Work

Code 43 - Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles, Single phase AC supply conforming ot ISS-374-1979 and with double ball bearing system. 48" Sweep (1200mm) Regular mode. With All Lead And Lifts As Per The Direction Of Engineer Incharge Of Work

Code 44 - Fixing all types and all capacities of 1'x4' / 2'x2' LED Light fittings indoor on the wall / ceiling / rafters / girders with necessary supporting frame, using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps. With All Lead And Lifts As Per The Direction Of Engineer Incharge Of Work

Code 45 - Fixing a ceiling/ Wall mounting fan of all capacities and all types with necessary clamps and S hook made out of 15mm dia MS rod, with 5 amps ceiling rose of approved quality with necessary length of 23/0.0076 inch PVC insulated twin twisted wire of approved quality mounted on a suitable size wooden board and wired complete. With All Lead And Lifts As Per The Direction Of Engineer Incharge Of Work

Code 46 - Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and "C" Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 5-32 Amps SP. With All Lead And Lifts As Per The Direction Of Engineer Incharge Of Work

Code 47 - Supplying and fixing regular MCB distribution boards on wall/wood board/flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 Phase/ Single door with powder coated painting. Made out of 14 SWG MS Enclosure. I Single Door 12 Way SP & N. With All Lead And Lifts As Per The Direction Of Engineer Incharge Of Work