Rural Development And Panchayat Raj Department Tender

code04 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse aggregates ( 2023-24/ Vol-1/ P. No.15/ I.No.2.1.2) with all lead lifts loading unloading charges including cost and conveyance of all materials labour equipments and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer incharge of the work.

code05 - Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the oints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm(PWD BGM SR2023-24/ P No. 60 I No 9.12.2)with all lead lifts loading unloading charges including cost and conveyance of all materials labour equipments and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer incharge of the work.

code06 - Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications. (2023-24/Vol-02/ P. No.100/ I. No.12.12)with all lead lifts loading unloading charges including cost and conveyance of all materials labour equipments and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer incharge of the work.

code07 - Providing and fixing in position fully panelled Matti/Nandi wood shutters for doors with, stiles and rails of 30mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures) (2023-24/Vol-02/ P. No.101/ I. No.12.21) with all lead lifts loading unloading charges including cost and conveyance of all materials labour equipments and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer incharge of the work.

code08 - Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge..( Vol-02/ P. No.47/ I. No. 8.34.1)with all lead lifts loading unloading charges including cost and conveyance of all materials labour equipments and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer incharge of the work.

code09 - Providing & fixing of 2 track x 2 panel sliding windows made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6 PHR with TPE (Thermo Plastic Elastomer) and lead free, gaskets -grey color having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 44mm width x 40mmheight with reinforcement of 1mm thickness and Sash with overall size of 27mm X 53mm with UPVC honeycomb tructure inside in lieu of GI reinforcement. Coextruded Glazing bead for fixing of glass shall be of size 9.5mm x 21.5mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with Crescent Locks. Wall thickness of frame & sash shall be of 2 mm.Maximum possible size 1219mm x 1219mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) (2023-24 Vol-02 P. No.108 I. no.12.84) with all lead lifts loading unloading charges including cost and conveyance of all materials labour equipments and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer incharge of the work

code10 - Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.( Vol-02/ P. No.46/ I. No. 8.33.2) with all lead lifts loading unloading charges including cost and conveyance of all materials labour equipments and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer incharge of the work.

code11 - Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (2023-24/ Vol-02/ P. No.45/ I. No. 8.25)with all lead lifts loading unloading charges including cost and conveyance of all materials labour equipments and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer incharge of the work.

code12 - Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.(PWD BGM SR 2021-22 P No. 41 I No8.3.1 )with all lead lifts loading unloading charges including cost and conveyance of all materials labour equipments and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer incharge of the work.