Rural Development And Panchayat Raj Department Tender

PRED04 - Providing and laying in position Reinforced cement concrete for all foundation works. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizer laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS Codes, labour, Usage charges of machinery, curing and all the other appurenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately)M20 Design mix Using 20mm nominal size graed crushed coarse aggregates.

PRED05 - Providing and laying in position Reinforced cement concrete for all Super structures of buildings, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.Pillars and Staircase Pillar

PRED06 - Roof beam, Staircase and Lintel

PRED07 - Slab,racks and Staircase : W.Slab

PRED08 - Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement complete as per drawing and technical specification. (P.N0.90/2.11/CSR/Volume-1/2023-24)

PRED09 - Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement :6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level with : Cement mortar 1:6 (1 Cement : 6 coarse sand) (P.No. 9/5.1.1/CSR/Volume-2/2023-24).

PRED10 - Providing Size Stone masonry with hard stone in foundation & plinth withy Cement mortar 1:6 (1 cement : 6 coarse sand) (P.N0.9/5.4/CSR/Volume-2/2023-24).

PRED11 - Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc, in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5m. (P.N0.7/1.9/CSR/Volulme-1/2023-24).

PRED12 - Providing Brick work with common burnt clay non modular bricks of class designation 3.5 in superstructure above plinth level in all shape and size in cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. (P.N0. 14/6.8/CSR/Volume-2/2023-24)

PRED13 - Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled incuding making plaster groves (excluding cost of cement concrete and side clamps) but including cost of materials, labour, HOM of machineries complete as per specifications. (P.No. 99/12.11/CSR/Volume-2/2023-24)

PRED14 - Providing and fixing M.S grills of required pattern in frames of windows etc. with M.S flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding (P.N0.86/11.34A/ CSR/Volume-2/2023-24)

PRED15 - Providing 20mm cement plaster of mix 1:6 (1 cement: 6 fine sand) to brick/ stone masonry including rounding off corners wherever requred smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer -in-charge (P.N0. 41/8.3.2/CSR/Volume-2/2023-24)

PRED16 - Providing and laying Vitrified tiles in different sizes (thickness to be specified by nanufacturer), with water absorption less than 0.08% and conforming to I.S 15662, of approved make, in all colours & shade, over 12 mm thck bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/m2 including grouting the joint with white cement % matching pigments etc. complete (P.N0. 61/9.17.1/CSR/Volume-2/2023-24)

PRED17 - Providing and fixing in position fully Panelled Honne wood Shutters for doors, styles and rails of 35mm thick with bottom and lock rails 180mm wide top rail and styles 100mm wide asper drawing and panels of 25mm thick including cost of materials labour HOM of machineries complete asper specifications (excluding cost of fixtures) (P.N0.100\12.15/CSR/Volume-2/2023-24).

PRED18 - Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of aapproved make conforming to IS: 733 and ISI:1285, fixing with dash fasteners of required dia size, including necessary fillied up the gaps at junctions, i.e at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, sfraight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges/ ivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) including cost of materials, labour, usage charges of machinery complete as per specifications. (P.N0. 88/11.35.2.3/CSR/ Vollume-2/2023-24)

PRED19 - Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5 mm thickness (weight not less than 12.50 kg/m2) including cost of materials, labour, usage charges of machinery complete as per specifications. (P.N0. 89/11.37.2/CSR/ Vollume-2/2023-24)

PRED20 - Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroghly brooming the surface to remove all dirt, dust drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (P.N0.45/8.25/ CSR/Volume-2/2023-24)

PRED21 - Open conduit System: Supplying 19/20mm dia 2mm thick confirming to IS 2509 with suitable bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC Ceiling and RCC wall/ stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy guage saddles at an interval of 700mm using NF screws. (Item No. 1.1)

PRED22 - Supplying heavy gauge PVC Conduit Pipe 19/20mm dia 2mm thick with suitable size bends, metal junction boxes adhesive paste etc., by goove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessry. (Item No. 1.3.1)

PRED23 - WIRES & CABLES. Point wiring uisng Copper wire without switch. point wiring using copper wire with switch supplying wiring adopting and loop system in existing conduit \casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5SQ.mm Cable confirming to the GTP, without switch, the other end of the wires shall be terminated with sufficient loose length a wood/PVC round block complete for each outlet. Short point up to 3 Mtrs from tapping point to out let via switch

PRED24 - Medium point above 3 Mtrs up to 6 Mtrs from tapping point out let via switch

PRED25 - Long point above 3 Mtrs up to 6 Mtrs up to 6 Mtrs from tapping to Two out let in a row.

PRED26 - Supplying and fixing PVC/metal conduit Deep junction box(Item No. 1.5.1) 19/20mm deep junction box

PRED27 - Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer coat of primer of approved make etc. (P.N0.1/1.4/ElectricalSR/CSR/2021-22) 6Amps one way.