Rural Development And Panchayat Raj Department Tender

PWD SR2023-24 Vol-I PAGE NO- 17 ITEM NO-2.5.1 - Providing and laying in position Reinforced cement concrete for allSuper structures of building , Road works, Water works, Irrigation works& super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid inlayers, well compacted using needle vibrators. The cost includes alllead & lifts, cost of all materials, quality confirming to the requirementsof relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technicalspecifications. (The cost of steel reinforcement, dowel bars & formworkto be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregateses

PWD SR 2023-24 vol.1 p.no 09 I.NO 5.1.1 - Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand)

PWD SR2023-24 Vol-I PAGE NO- 16 ITEM NO-2.5.2 - Providing and laying in position Reinforced cement concrete for allSuper structures of building , Road works, Water works, Irrigation works& super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid inlayers, well compacted using needle vibrators. The cost includes alllead & lifts, cost of all materials, quality confirming to the requirementsof relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technicalspecifications. (The cost of steel reinforcement, dowel bars & formworkto be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregateses

PWD SR2023-24Vol-I PAGE NO- 17 ITEM NO-2.5.1 - Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates PWD CSR 2021-22 Volume -1 P.No 17. I.No 2.5.1

PWD SR2023-24 vol-I PAGE NO-18 ITEM NO-2.11 - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcementincluding cost of all materials, machinery, labour, cleaning, straightening,cutting, bending, hooking, laping/welding joints, tying with binding wire / softannealed steel wire and other ancilary operations complete as per drawing andtechnical specification- Building

PWD SR 2023-24 V01-2 pg.no. 13 item no. 6.2 - Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work

PWD SR 2023-24 P.No. 41 I.No. 8.3.1 - Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) tobrick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge

PWD SR 2023-24 Vol-2 Page No.68 tem No.9.38 - Providing skirting, dadooing, rises of steps with white glazed tiles 6mmthick on 10mm thick cement plaster 1:3 and jointed with white cementslurry over existing rough plaster surface using glazed tiles of approvedmake and size including cost of materials, labour, complete as perspecifications

PWD SR 2023-24 Vol-2 Page No.121 tem No.14.1 - Providing and fixing water closet squatting pan (Indian type W.C. pan )with 100 mm sand cast Iron P or S trap, 10 litre low level whiteP.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required

PWD SR 2023-24 Vol-2 Page No.114 tem No.13.8.1.2 - Providing and fixing unplasticised PVC connection pipe with brass unions nominal bore

PWD SR 2023-24 Vol-2 Page No.113 tem No.13.2.1 - Providing and fixing brass bib cock of approved quality : 15 mm nominal bore

PWD SR Vol -2 2023-24 P.No. 45 .No. 8.25 - Distempering with oil bound washable distemper of approved brandand manufacture to give an even shade :New work (two coats) overand including water thinnable priming coat with cement primer afterthoroughly brooming the surface to remove all dirt, dust, mortar dropsand foreign matter including preparing the surface even and sand papersmooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge

PWD SR2022 Vol-II 1st Addenda w.e.f 21-04-2022 It. - Providing and placing on terrace(at all floor levels) polyethylene water storage tanks as per IS12701 marked, with cover suitable locking arrangements and making necessary holes for inlet, outlet and over flow pipes,but without fittings and the base support for tank.

PWD SR Vol -2 2023-24 P.No. 105 .No. 12.54 - Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC oam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge. (excluding cost of fixtures )

PWD SR Vol -2 2023-24 P.No. 105 .No. 12.54 - Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding