Rural Development And Panchayat Raj Department Tender

code04 - Providing and fixing M S grills of required pattern in frames of windows etc with M S flats square or round bars etc including priming coat with approved steel primer all complete Fixed to steel windows by welding Vol 02 P No 85 I no 11 34 A with all lead lifts loading unloading charges including cost and conveyance of all materials labour equipments and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer incharge of the work.

code05 - Providing 12mm cement plaster finished with a floating coat of neat cement of mix 1 4 1 cement 4 fine sand to brick masonry including rounding off corners wherever required smooth rendering providing and removing scaffolding including cost of materials labour curing complete as per specifications and as per directions of Engineer in charge Vol 02 P No 41 I No 8 4 2 with all lead lifts loading unloading charges including cost and conveyance of all materials labour equipments and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer incharge of the work.

code06 - Providing and fixing water closet squatting pan Indian type W C pan with 100mm sand cast Iron P or S trap10 litre low level white P V C flushing cistern including flush pipe with manually controlled device handle lever conforming to IS 7231 with all fittings and fixtures complete including cutting and making good the walls and floors wherever required White Vitreous china Orissa pattern W C pan of size 580x440mm with integral type foot rests Vol 02 P No 131 I No 14 1 1 with all lead lifts loading unloading charges including cost and conveyance of all materials labour equipments and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer incharge of the work.

code07 - Providing and laying vitrified floor tiles in different sizes thickness to be specified by the manufacturer with water absorption less than 0 08 and conforming to IS 15622 of approved make in all colours and shades laid on 20mm thick cement mortar 1 4 1 cement 4 coarse sand jointing with grey cement slurry 3 3 Kg m2 including grouting the joints with white cement and matching pigments etc complete Vol 02 P No 60 I No 9 12 2 with all lead lifts loading unloading charges including cost and conveyance of all materials labour equipments and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer incharge of the work.

code08 - Finishing walls with Acrylic Smooth exterior paint of required shade New work Two coat applied 1 67L10 m² over and including priming coat of exterior primer applied 2 20 kg 10 m² with paint of approved quality to give an even shade after thoroughly brooming the surface to remove all dirt dust mortar drops and foreign matter including preparing the surface even and sand paper smooth cost of materials labour complete as per specifications and as per directions of Engineer in charge p 46 I no 8 30 V2 with all lead lifts loading unloading charges including cost and conveyance of all materials labour equipments and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer incharge of the work.

code09 - Providing and applying white cement based putty of average thickness 1mm of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge P 50 V2 INO 8 51 with all lead lifts loading unloading charges including cost and conveyance of all materials labour equipments and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer incharge of the work.

code10 - Providing and fixing Chlorinated Polyvinyl Chloride CPVC pipes having thermal stability for hot cold water supply including all CPVC plain brass threaded fittings including fixing the pipe with clamps at 1 00m spacing This includes jointing of pipes fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge Internal work Exposed on wall 25mm nominal dia Pipes P no 120 I NO 13 31 3 25 V2 with all lead lifts loading unloading charges including cost and conveyance of all materials labour equipments and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer incharge of the work.

code11 - Providing PVC ringtite pipes conforming to IS 4985 2000 with latest amendments and conveying to worksite rolling and lowering into trenches laying true to line and level and perfect linking at joints testing and commissioning including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials excluding cost of specials with jointing of approved type with all labour with all lead lift including encasing the pipe alround to a depth of not less than 15cms with soft gravel or selected earth available from the excavation etc complete and giving necessary hydraulic test to the required pressure as per ISS Contractor will make his own arrangements for procuring water for testing etc PVC pipes 110mm dia 6 kg sqcm class 3 P no 113 I NO 10 1 7 V5 with all lead lifts loading unloading charges including cost and conveyance of all materials labour equipments and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer incharge of the work.

code12 - Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications Two coats applied on walls 1 25 L 10 m² over and including one coat of Special primer applied 0 75 L 10 m² with paint of approved quality to give an even shade after thoroughly brooming the surface to remove all dirt dust mortar drops and foreign matter including preparing the surface even and sand paper smooth cost of materials labour complete as per specifications and as per directions of Engineer in charge The gloss should be 50% 60 degree angle with 10 years life P 46 V2 INO 8 33 1 with all lead lifts loading unloading charges including cost and conveyance of all materials labour equipments and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer incharge of the work.

code13 - Providing 18mm cement plaster in two coats under layer 12mm thick cement plaster with cement mortar 1 5 1 cement 5 coarse sand and a top layer 6mm thick cement plaster with cement mortar 1 3 1 cement 3 coarse sand finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering providing and removing scaffolding including cost of materials labour curing complete as per specifications and as per directions of Engineer in charge Vol 02 P No 42 I No 8 9 with all lead lifts loading unloading charges including cost and conveyance of all materials labour equipments and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer incharge of the work.

code14 - Providing and fixing hand rail of approved size by welding etc to steel ladder railing balcony railing staircase railing and similar works including applying priming coat of approved steel primer G I pipes including cost of materials labour usage charges of machinery complete as per specifications and as per directions of the Engineer in Charge Vol 02 P No 82 I No 11 26 3 with all lead lifts loading unloading charges including cost and conveyance of all materials labour equipments and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer incharge of the work.

code15 - Providing Mathi Nandi wood frames of doors windows clerestory windows ventilators and other frames wrought framed or assembled including making plaster groves excluding cost of cement concrete and side clamps but including cost of materials labour usage charges complete as per specifications Vol 02 P No 100 I No 12 12 with all lead lifts loading unloading charges including cost and conveyance of all materials labour equipments and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer incharge of the work.

code16 - Providing and fixing in position fully panelled Matti Nandi wood shutters for doors with stiles and rails of 30mm thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials labour usage charges complete as per specifications excluding cost of fixtures Vol 02 P No 101 I No 12 21 with all lead lifts loading unloading charges including cost and conveyance of all materials labour equipments and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer incharge of the work.

code17 - Flooring with 25mm thick polished tandur blue stone slabs using cement mortar 1 6 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab including cost of materials labour curing polishing complete as per specifications Vol 02 P No 64 I No 9 34 with all lead lifts loading unloading charges including cost and conveyance of all materials labour equipments and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer incharge of the work.

code18 - Providing and laying Polished Sadarahalli Grey Granite stone flooring in required design and patterns in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 20mm thick stone slab over 20mm average thick base of cement mortar 1 4 1 cement 4 coarse sand laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing curing and polishing etc all complete as specified and as directed by the Engineer in Charge Vol 02 P No 64 I No 9 31 with all lead lifts loading unloading charges including cost and conveyance of all materials labour equipments and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer incharge of the work.

code19 - Providing and fixing Stainless Steel A ISI 304 18 8 kitchen sink as per IS 1398 with C I brackets and stainless steel plug 40 mm including painting of fittings and brackets cutting and making good the walls wherever required 1Kitchen sink with drain board 510x1040mm bowl depth 250 mm Vol 02 P No 133 I No 14 10 1 with all lead lifts loading unloading charges including cost and conveyance of all materials labour equipments and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer incharge of the work.

code20 - Providing and placing on terrace at all floor levels polyethylene water storage tank IS 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet outlet and overflow pipes but without fittings and the base support for tank P No 123 I No 13 34 with all lead lifts loading unloading charges including cost and conveyance of all materials labour equipments and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer incharge of the work.