Rural Development And Panchayat Raj Department Tender

code1.9 - Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.(KPWD SR 21-22 V-I Item ,page.no.7 , No.1.9 ) ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work

code3.6 - Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 (KPWD SR 21-22 Vol-III, P.No. 17, I.No. 3.6) ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work

code2.1.6 - Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates (I.No. 2.1.6, vol-I,P.no.15, KPWD SR 2023-24 ) ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work

code2.1.6 - Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates (I.No. 2.1.6, vol-I,P.no.15, KPWD SR 2023-24 ) ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work

code2.1.6 - Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates (I.No. 2.1.6, vol-I,P.no.15, KPWD SR 2023-24 ) ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work

code2.11.a - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification (I.No. 2.11.a, vol-I, p.no. KPWD SR 2023-24 ) ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work

code6.1 - Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.(I.No. 6.1, vol-II, KPWD SR 2023-24 ) ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work

code8.4.1 - Providing 12mm cement plaster finished with a floating coat of neat cement of mix 1:3 (1 cement : 3 fine sand ) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete work as per specification and the direction of engineer incharge of work (I.No. 8.4.1, vol-II, KPWD SR 2023-24 ) ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work

code8.25 - Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge..( I.No.8.25, vol-II, KPWD SR 2023-24) ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work

code9.36 - Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab , including cost of materials,labour, curing, polishing complete as per specifications.( I.No. 9.36, page no.64,vol-II, KPWD SR 2023-24 ) ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work

code20.44.2 - Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge.Orissa pattern W.C Pan of size 580x440 mm ( I.No. 20.44.2,page no.202,vol-II, KPWD SR 2023-24 ) ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work

code19.1 - Demolishing lime concrete manually/ by mechanical means and disposal of material to the appropriate disposal area as perdirection of Engineer incharge.( I.No. 19.1, vol-II, page no.187,KPWD SR 2023-24 ) ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work

code8.34.1, - Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specification and as per the direction of engineer incharge of work(I.No. 8.34.1, Vol -II,page no.87, KPWD SR 2023-24) ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work

code14.4.1 - Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :One urinal basin with 5 litre white P.V.C. automatic flushing cistern(I.No. 14.4.1, Vol -II,page no.131, KPWD SR 2023-24) ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work

code87 - Brass bib-cock 20 mm dia (I.No. 14.4.1, Vol -II,page no.131, KPWD SR 2023-24) ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work

code13.5.3 - Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :25 mm nominal boreI.No. 13.5.3, Vol -II,page no.117, KPWD SR 2023-24) ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work

code11.34B - Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc.( I.No. 11.34B, Vol -II, page no.86,KPWD SR 2023-24) ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work

code13.34 - Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.( I.No. 13.34, Vol -II, page no.123,KPWD SR 2023-24) ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work

code13.31.3 - Providing and fixing chlorinated polyvinyl chloride (CPVC) Pipe having thermal stability for hot & cold water supply including all cpvc plain & brass threated fittings including fixing the pipe with clamps at ,.00 m spacing this including joining of pipes & fitting with one step cpvc solvent cement and testing of joints complete as per direction of engineer in charge , 25mm nominal dia pipes( I.No. 13.31.3, page no.122, Vol-II, KPWD SR 2023-24 ) ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work

code13.33.4 - Providing and fixing chlorinated polyvinyl chloride (CPVC) Pipe having thermal stability for hot & cold water supply including all cpvc plain & brass threated fittings including fixing the pipe with clamps at ,.00 m spacing this including joining of pipes & fitting with one step cpvc solvent cement and testing of joints complete as per direction of engineer in charge , 32mm nominal dia pipes( I.No. 13.33.4, page no.122, Vol-II, KPWD SR 2023-24 ) ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work

code13.64.1 - Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.75mm nominal dia pipes.( I.No. 13.64.1, Vol -II, page no.128,KPWD SR 2023-24) ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work

code13.64.2 - Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.110mm nominal dia pipes.( I.No. 13.64.2, Vol -II, page no.128,KPWD SR 2023-24) ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work

code13.60 - Providing and fixing PVC (S.W.R) P Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete( I.No. 13.60, Vol -II, page no.127,KPWD SR 2023-24) ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work

code15.1 - Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. ( I.No. 15.1, vol-II,page no.149, KPWD SR 2023-24 ) ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work

code10.14 - Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2, including pointing in white cement mixed with pigment of matching shade complete. ( I.No. 10.14, vol-II, page no.71,KPWD SR 2023-24) ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work

code9.17.2 - Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete..( I.No. 9.17.2 , vol-II, page no.61,KPWD SR 2023-24 )) ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work

code12.21 - Providing and fixing in position Mathi/Nandi wood fully panelled shutters for doors with , stiles and rails of 30mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specification (excluding cost of fixtures) ( I.No. 12.21, vol-II,page no.100, KPWD SR 2023-24 ) ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work

code20.38 - Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 m² and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge. (For Roof and Water Tanks)( I.No. 20.38, vol-II,page no.201, KPWD SR 2023-24 ) ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work

code19.3 - Demolishing R.C.C. work manually/ by mechanical means including stack ing of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge.( I.No. 19.3, vol-II,page no.187, KPWD SR 2023-24 ) ---- with all lead and lifts the work shall be carried out as per the instruction of Engineer in charge of the work