Rural Development And Panchayat Raj Department Tender

code04 - Water Bound Macadam Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse ag (ii) Grading-II (53 mm to 22.4 mm) (b) Using Screening Type B (11.2mm agg) (Page No - 23, Item No. 4.13 PWDCSR 2023-24 V-3 ) ---- WORK COMPLETE WITHIN 3 MONTHS

code05 - Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M20 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 m3 capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including construction joints, primer, sealant , curing of concrete slabs for 14- days, and water finishing to lines and grade as per drawing and technical specification clause 1501 with all lead, lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments etc., complete. as per the directions of the Engineer-in-charge of the work. (Page No - 148, Item No. 16.27 PWDCSR 2023-24 V-3 ) ---- WORK COMPLETE WITHIN 3 MONTHS

code06 - Tack coat on Granular surface treated with primer Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.25 kg/m2 on Granular Surface (Page No -29, Item No. 5.4 PWDCSR 2023-24 V-3 ) ---- WORK COMPLETE WITHIN 3 MONTHS

code07 - Open - graded Premix SurfacingProviding, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscosity grade bitumen VG-30 to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable Hot mix plant of capacity not less than 40/60 TPH laying and rolling with a smooth wheeled roller, finished to required level and grades (Page No -39, Item No. 5.19 PWDCSR 2023-24 V-3 ) ---- WORK COMPLETE WITHIN 3 MONTHS

code08 - Seal CoatProviding and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A and B seal coats with bituminous binder VG-30 Case - II : Type B Premix Seal coat (Page No -39, Item No.5.21 PWDCSR 2023-24 V-3 ) ---- WORK COMPLETE WITHIN 3 MONTHS

code09 - Construction of Subgrade and Earthen Shoulders Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 (Page No - 15, Item No. 3.6 PWDCSR 2023-24 V-3 ) ---- WORK COMPLETE WITHIN 3 MONTHS

code10 - Providing and fixing RCC Name board 1.35x0.60x0.4 fixing in RCC poles of size 0.10x0.10x2.60 mtrs in cement concret M20 porportion using 20mm & down size graded metal machine mixed with 10mm dia main steel bars & 8 mm dia strips as shown in drawing the board shall be provided with 12 mm thick cement plaster in cement mortar 1:3 on both the sides. the poles shall be embeded in the ground for a depth of 0.5 mtr with cemtn concrete M 10 proportion the board shall be fixed as per the drawing 7 at the place indicated by the engineering charge of work. the cost includes excavation cost of all materials cost of steel centring transportion charges, fixing charges etc the work shall be carried out as per the detailed specifications, drawings and directions of the engineer in charge of the work (I. 37.60 P. 173) (5500.00+825.00=6325.00) ---- WORK COMPLETE WITHIN 3 MONTHS