Rural Development And Panchayat Raj Department Tender

AEEBDM004 - 16.27 1501 Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M20 (Grade), coarse and fine aggregates conforming to IS:383:2016, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate (PWD COMMON SR 2023-24 VOL -III , I.NO 16.27 , Pg.No 148 ) with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge

AEEBDM005 - C C Drain Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , asper drawing and specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. ( SR VOL-I 2023-24 P. No 15 It No2.1.2) with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge

AEEBDM006 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement &formwork shall be paid separately)( SR VOL-I 2023-24 P. No 15 It No2.1.2) with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge

AEEBDM007 - Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50mto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates andfine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead &lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required tocomplete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (PWD SR VOL-I 2023-24 P. No 16 It No 2.4.2) with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge

AEEBDM008 - Vol-I Appendix I Additionalities for Formwork, Centering & Scaffolding 50% with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge

AEEBDM009 - Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) (PWD SR VOL-I 2023-24 P. No -18 It No 2.11a) with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge