Rural Development And Panchayat Raj Department Tender

code04 - Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work..PWD SR 2023-24 V-I P 7 I.No.1.8 Rs.474.00/cum

code05 - Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 PWD SR 2023-24 V-3 P-17 I.No.3.6 Rs.493.00/cum

code06 - Construction of Granular Sub-Base by Mix in Place Method by providing well graded Gravel, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification. PWD SR 2023-24 V-3 P-145 I.No.16.10 Rs1427.00/cum

code07 - Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory roller in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density Using Screening Crushable type such as Moorum or Gravel Grading-I (63 mm to 45 mm) PWD SR 2023-24 V-3 P-26 I.No.4.14B i (a) Rs2164.00/cum

code08 - Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory roller in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density Grading-II (53 mm to 22.4 mm) PWD SR 2023-24 V-3 P-26 I.No.4.14B ii (b) Rs2406.00/cum

code09 - Providing and applying primer coat with SS1 grade Bituminous Emulsion on prepared surface of granular Base including cleaning with mechanical Broom of road surface and spraying primer at the rate of 0.90 kg/m 2 using mechanical means PWD SR 2023-24 V-3 P-31 I.No. 5.2 B (i) Rs 53.00/sqm

code10 - Mix Seal Surfacing : Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.09 mm (Type-A) or 13.2 mm to 0.09 mm (Type-B) aggregates using VG-30 bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable hot mix plant of capacity not less than 40/60 TPH, laying and rolling with a Smooth wheeled roller finishing to required level and grade, Type B PWD SR 2023-24 V-3 P-39 I.No. 5.20 (ii) Rs.176.00/sqm

code11 - Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc (PWD CSR 2023-24 VOL-3 S..No 8.16 (ii) P.No.67

code12 - Reinforced cement concrete M15 grade boundary pillars of standard design as per IRC:25, fixed in position including finishing and lettering but excluding painting (PWD CSR 2023-24 VOL-3 S.No.8.18 P.No. 67 )

code13 - Providing and fixing of retro- reflectorised cautionary,mandatory and informatory sign as per IRC:67:2012 made of Class B Type IV retro reflective sheeting fixed over 2 mmthick aluminium sheeting vide clause 803.1, 3mm/4mm thick Aluminium composite material sheet depending on the size of the sign fixed over the back support frame of min 25 x 25 x 3mm angle mounted on a mild steel circular pipe 65 NB, 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing.The sign shall be maintained as per section 12 of IRC:67:2012 (PWD CSR 2023-24 VOL-3 It.No S.No 8.5 (ii) (viii) P.No.64 )900 mm equilateral triangle

code14 - Providing and fixing of retro- reflectorised cautionary,mandatory and informatory sign as per IRC:67:2012 made of Class B Type IV retro reflective sheeting fixed over 2 mmthick aluminium sheeting vide clause 803.1, 3mm/4mm thick Aluminium composite material sheet depending on the size of the sign fixed over the back support frame of min 25 x 25 x 3mm angle mounted on a mild steel circular pipe 65 NB, 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing.The sign shall be maintained as per section 12 of IRC:67:2012 (PWD CSR 2023-24 VOL-3 It.No S.No 8.5 (ii) (viii) P.No.64 )600 mm circular

code15 - Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat's eye made of polycarbonate and ABS mouldedbody and reflective panels with micro prismatic lens capable ofproviding total internal reflection of the light entering the lensface and shall support a load of 16000 kg tested in accordanceto ASTM D 4280 Type H and complying to Specifications ofCategory A of MORTH Circular No RW/NH/33023/10-97DO III Dt 11.06. 1997. The height, width and length shall notexceed 50 mm, 100 mm and 102 +/- 2 mm and with minimum reflective area of 13 cm2 on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 mm and height not less than 30+/- 2 mm) from the body is to be a minimum value of 500 Kg. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer.The contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer. (PWD 2023-24 , S.No -8.43 P.No. 74 )

code16 - Road marking with hot applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 g/m2 area, thickness of 2.5 mm is exclusive of surface applied glass beads as per RC:35: 2015. The finished surface to be level, uniform and free from streaks and holes. (PWD 2023-24 , S.No -8.15 P.No.67 )

code17 - Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67:2012 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick or Aluminium composite material sheet with overall thickness of 4mm with area not exceeding 0.9 m 2 fixed over back support frame of min 35 x 35 x 3mm angle mounted on a mild steel circular pipe 65 NB, firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing (PWD 2023-24 , S.No -8.7 P.No. 65 )

code18 - ONE VENT PIPE CULVERT-2No'S Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work.(PWD CSR 2023-24 VOL-1 S.No. 1.4.2 P.No.5 ) Rs.259.00/cum

code19 - Providing and laying in position Cement Concrete for levelling course forall works in foundation. The granite/trap/basalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes machine mixed, laid inlayers not exceeding 150 mm thickness, well compacted using plate vibrators,including all lead & lifts, cost of all materials of quality, labour, Usage charges ofmachinery, curing, and all the other appurtenances required to complete thework as per technical specifications. Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates (PWD CSR 2023-24 VOL-1 S.No. 2.1.3 P.No.15 Rs.5989.00/cum

code20 - Providing and laying in Cement Concrete for allBasement & surface level works, return walls,retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fineaggregates as per relevant IS Codes machine mixedwith super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherevernecessary, including all lead & lifts, cost of all materialsof quality, labour, Usage charges of machinery, curingand all other appurtenances required to complete thework as per technical specifications (The cost of steel reinforcement & formwork to be paid separately) (PWD CSR 2023-24 VOL-1 S.No. 2.3.1 P.No.68 ) Rs.6323.00/cum

code21 - Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement complete as per drawing and technical specification. (PWD CSR 2023-24 VOL-1 S.No. 2.11 b P.No.18) Rs,86206.000/MT

code22 - Providing and laying reinforced cement concrete pipe NP3for culverts on first class bedding of granular material insinge row including fixing collar with ement mortar 1:2but excluding excavation, protection works, ackfilling,concrete and masonry works in head walls and parapetsClause 1101.6 Clause 1101.6.1000 mm dia (PWD CSR 2021-22 VOL-3 SL.No.16.15 (B), P.No.156 ) Rs.7958.00/mtr

code23 - Back filling behind abutment, wing wall and return wall complete including compaction as per drawing and Technical Specification (PWD CSR 2023-24 VOL-3 SL.No.12.3 A, P.No.117 Rs.1168.00/cum

code24 - Providing and laying boulders apron on river bed for protection against scour with stone boulders weighing not less than 40 kg each complete as per drawing and Technical specification(PWD CSR 2023-24 VOL-3 S.No. 14.1 A P.No.129 ) Rs.1912.00/cum