Rural Development And Panchayat Raj Department Tender

AEEBDM004 - Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50mto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates andfine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead &lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required tocomplete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (PWD SR VOL-I 2023-24 P. No 16 It No 2.4.2) with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge

AEEBDM005 - Vol-I Appendix I Additionalities for Formwork, Centering & Scaffolding 70% with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge

AEEBDM006 - GROUND FLOOR slab 1 with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge

AEEBDM007 - Vol-I Appendix I Additionalities for Formwork, Centering & Scaffolding 50 % with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge

AEEBDM008 - Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) (PWD SR VOL-I 2023-24 P. No -18 It No 2.11a) with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge

AEEBDM009 - Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage chargesof machinery & other incidental chargescomplete as per the direction of engineer incharge of work. (PWD SR VOL-II 2023-24 P. No 13 It No 6.1) with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge

AEEBDM010 - Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (PWD SR VOL-II 2023-24 P. No 41 It No 8.1.1) with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge

AEEBDM011 - Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (PWD SR VOL-II 2023-24 P. No 45 It No 8.25) with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge

AEEBDM012 - Compacting original ground supporting embankment Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Table 300-2 for embankment construction (PWD COMMON SR 2023-24 Volume- III I No.3.7, Pg No -17 ) with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge

AEEBDM013 - Collection and Filling of Stone aggregate for filter media. - 12mm aggregate (including lead charges) Complete as per theinstructions of Engineer in Charge at site. (PWD SR VOL-I 2023-24 P-A-38 , I. No- ii 3 ) with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge

AEEBDM014 - 6.8.3 IRC SP 63: 2018 Precast Cement Concrete Interlocking Blocks Providing and laying 100mm thick factory made precast M -40 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Commercial Traffic Axle load repetitions more than 10MSA upto 20MSA for Industrial Streets, Bus & Truck parking of approved shape and colour, laid in required pattern and including over 40mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (WMM/WBM Base to be paid separately as per relevant technical specification) (PWD COMMON SR 2023-24 VOL -III , I.NO 6.8.3 , Pg.No 52 ) with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge

AEEBDM015 - 16.27 1501 Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M20 (Grade), coarse and fine aggregates conforming to IS:383:2016, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate (PWD COMMON SR 2023-24 VOL -III , I.NO 16.27 , Pg.No 148 ) with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge

AEEBDM016 - 11.34B Providing and fixing M.S. grills of required pattern in frames of windowsetc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. (PWD SR VOL-II 2023-24 P. No 86 It No 11.34A ) with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge

AEEBDM017 - 12.90 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) (PWD SR VOL-II 2023-24 P. No 110 It No 12.90 ) with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge

AEEBDM018 - 14.1 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 14.1.1 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests (PWD COMMON SR 2023-24 Volume- II P. No 41 It No 8.3.2) with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge

AEEBDM019 - 14.7.1 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps (PWD COMMON SR 2023-24 Volume- II P. No 132 It No 14.7.1 with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge

AEEBDM020 - 13.34 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. L (PWD COMMON SR 2023-24 Volume- II P. No 123 It No 13.34) with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge

AEEBDM021 - 13.33.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 20 mm nominal dia Pipes (PWD COMMON SR 2023-24 Volume- II P. No 123 It No 13.34) with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge

AEEBDM022 - ELECTRIFICATION Chapter No-2. WIRES & CABLESPoint wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. GROUP A. Short point upto 3Mtr from tapping point to out let via switch ( P No 5 ; I No 2.1.1) with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge

AEEBDM023 - Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. GROUP A.Medium point above 3M. upto 6M from tapping point to out let via switch ( P No 5 ; I No 2.1.2) with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge

AEEBDM024 - Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2 X1.5Sq.mm Cable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet / gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. GROUP A.Long point above 6Mtr upto 10Mtr from tapping point to out let via switch ( P No 5 ; I No 2.1.3) with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge

AEEBDM025 - Wiring for lighting/power circuit using one of PVC insulated 1100V grade, multis and Copper conductor single core cable in open or consealed system of wiring. Using Class 'A' approved materials.1 sqmm (P.No. 5, I.No. 2.3.1) with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge

AEEBDM026 - Wiring for lighting/power circuit using one of PVC insulated 1100V grade, multis and Copper conductor single core cable in open or consealed system of wiring. Using Class 'A' approved materials.2.5 sqmm (P.No. 5&6, I.No. 2.3.3) with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge

AEEBDM027 - Wiring for lighting/power circuit using one of PVC insulated 1100V grade, multis and Copper conductor single core cable in open or consealed system of wiring. Using Class 'A' approved materials.4 sqmm (P.No. 5&6, I.No. 2.3.4) with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge

AEEBDM028 - Chapter No-3. SWITCHES, SOCKETS & ACCESSORIESSupply 6A flush/projected type socket and a 6 amps flush/ projected type SP switch either surface/flush mounting in a existing gang box or in a 4mm thick plastic sheet and fixing over a flush monted wooden box and wiring using necessary capacity wires as required.6 Amps 3/5 Way ( P No 9 ; I No 3.1.2 ) with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge

AEEBDM029 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32 Amps DP switch( P No 10 ; I No 3.6.10) with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge

AEEBDM030 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16Amps Univerals socket ( P No 10 ; I No 3.6.11) with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge

AEEBDM031 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Electronic stepped regulator. ( P No 10 ; I No 3.6.4) with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge

AEEBDM032 - Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N.F. screws.(P No 10 ; I No 3.9) with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge

AEEBDM033 - Extra for supplying 4mm thick white plastic plate and covering for junction boxes of size ……mm conduit using necessary machine screws. 80mm (P.No. 10, I.No. 3.10.1) with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge

AEEBDM034 - Extra for supplying 4mm thick white plastic plate and covering for junction boxes of size ……mm conduit using necessary machine screws. 110mm (P.No. 10, I.No. 3.10.2) with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge

AEEBDM035 - Chapter No-12. LUMINAIRS / LIGHT FIXTURES & ACCESSORIES Supply of round/square recess/surface mounted rolling type LED Down light with .......W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector & has swiveling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition LED square or round down light 10-12W ( P No 65 ; I No 12.5.2) with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge

AEEBDM036 - Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation.Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr @Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/Overload, short circuit/ miss-wiring protection. Compatible for pole mouting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. Supplying of recess mounting non integral type ........LED ...... W luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded fase ceiling clamps,Power LEDs with CCT 6500 degree K, CRI 70%. efficacy 100 lumen per watt, 120degree beam spread, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level. LEDs are driven by HF electronic driver integrated in a separate control gear assembly., with PF 0.95, power loss should 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, , THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/ CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. LED modular down light 1'x1' 34 -22watts ( P No 65 ; I No 12.6.1) with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge

AEEBDM037 - Chapter No-6. L.T. U.G. CABLES Supplying, fixing & wiring, earth electrode for ground conduits. I.C. cutouts and other equipements, on the meter board using 40mm dia 2.90 thick of GI pipe 2.5 mtr long burid in a pit. The pit sholud be gilled with equal pro[ortion of salt and charcoal 150mm alround the pipe to completedepth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per clause 7.3.3 of is 732 using 12mm dia bolts, nuts, washers, & check nut etc., The pipe shall have 16 through holes of 12mm dia. (P.No.40,I.No.6.1) with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge

AEEBDM038 - Chapter No-7. FANS & AIR CONDITIONERS Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system. 48'' Sweep (1200)mm Regular model (P.No. 46 I.No. 7.3.1) with all lead and lifts loading & unloading etc. complete as per direction of Engineer-in-charge