Rural Development And Panchayat Raj Department Tender

code04 - Providing and laying in position Reinforced cement concrete for all Sub structures of building Irrigation works Sub structure works of bridges Drain works andother parallel works from 0.50m to 3.50 m height. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers well compacted using needle vibrators providing weep holes wherever necesary including all lead andlifts cost of all materials of quality confirming to the requirements of relevant IS codes labour Usage charges of machinery curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement andformwork to be paid separately M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates

code05 - Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening cutting bending placing in position binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material labour usage charges complete as per specifications. (The laps and wastages shall not be measured separately

code06 - Filling available excavated earth (excluding rock in trenches plinth sides of foundations and other similar works etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering lead up to 50 m and lift upto 1.5 m

code07 - Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand including rounding off corners wherever required smooth rendering providing and removing scaffolding including cost of materials labour curing complete as per specifications and as per directions of Engineer-in-charge.

code08 - Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding

code09 - Galvanised wire mesh of average width of aperture 1.4 mm and nominal dia of wire 0.63 mm

code10 - Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 1101.6 Providing and Laying Reinforced Cement Concrete Pipe NP3 as per design in Single Row 750 mm dia

code11 - supplying UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite rolling and lowering into trenches laying true to line and level and perfect linking at joints testing and commissioning including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of UPVC pipes (with cost of elastomeric sealing rings and specials (excluding cost of specials with jointing of approved type with all labour lead andlifts including encasing the pipes alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (contractor will make his own arrangements for procuring water for testing etc. for:

code12 - supplying UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite rolling and lowering into trenches laying true to line and level and perfect linking at joints testing and commissioning including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of UPVC pipes (with cost of elastomeric sealing rings and specials (excluding cost of specials with jointing of approved type with all labour lead andlifts including encasing the pipes alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (contractor will make his own arrangements for procuring water for testing etc. for: 110 mm dia PVC Tee

code13 - Providing and fixing MS inspection door of size 60 cms x 60 cms including MS frame made of 50x50x6mm angle shutters made of 3mm thick MS sheets with hinges locking arrangements at top etc. including painting with anticorrosive approved paint etc. complete including all lead and lifts etc.

code14 - Supplying and filling in plinth with sand under floors foundation of Bridges including watering ramming consolidating and dressing complete.

code15 - Good quality well burnt charcoal for grounding 600095 No 112:600 purposes packed in non

code16 - Supplying 40mm and downsize granit/basalt crushed coarsed aggrigate as per relevant IS Codes for screening bed complete as per specification

code17 - Supplying 20mm and downsize granit/basalt crushed coarsed aggrigate as per relevant IS Codes for screening bed complete as per specification

code18 - 20.31 Providing and Fixing 'Logo Board ' of PMGSY at StartingPoint Providing and fixing of typical Logo board as per specifications and drawing. Two ACP Sheet of 3mm thick top and Bottom plate duly welded bolted with MS Square angle 25mm x25mmx 5mm size on back and on the edges. The Top and Bottom plate will be welded bolted to 1 nos75x75x6 mm square Hallow section duly embedded in cement concrete M15 Grade of 600*600*600 mm 450 mm below ground level.RetroReflecting Sheet as per IRC:67 Clause 1701.3.8.1 fixed over aluminium sheeting.All sections of steel tube will be painted with primer and two coats of epoxy paint as per drawing. A Retro Reflective Trafic Sign As per IRC 67 Clause 1701.3.8.1 Class A Type-1