Rural Development And Panchayat Raj Department Tender

1.4.1 - Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the workIn all kinds of soils Depth upto 1.5 m.(P.No.5 , I.No. 1.4.1, volume 1 sr 2023-24)

Z020C - Supply and erection of Rcc rings for well steining of 0.3 mtr depth using m 20 grade concrete using clean graded granite or trap or jelly of approved quality 20mm and down size well compacted including centering form work and plastering for both faces with C.M 1 3 prapotion as per design using 6.50mm M.S coil at the rate of 10kgs ring including cost of steel and fabrication,bailing out of water erction etc complate for 1.80m dia rings of stening thickness 0.075mm upto 18M depth

10.14.3 - Supplying PVC ringtite pipes confirming to IS 4985:2000 with latest amendments and conveying to work site, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both distinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for producing water for testing) etc. for: (P.N0.120/10.14.3Water supply SR/2023-24). PVC pipes 90mm dia.(weight of pipe -0.917kg/m

13.33 - Providing and fixing chlorinated poly vinyl chloride (CPVC) pipes confirming to IS 15778 having thermal stability for hot and cold water supply including all CPVC Plain and brass thre.aded fittings including fixing pipe with clamp at 1.00mtr spacing .This includes jointing of pipes and fitting with one step all CPVC solvent cement and testing of joints complete20mm nominal OD pipe(P.No.98, I.No 13.85.1.,PWD SR 2028-19)

13.85.1 - 25mm nominal OD pipes p.no 98 I NO 13.85.1 PWD SR 2018-19

12.54 - Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge.(P.No.105, I.No. 12.54 ,volume 2 2023-24)

12.55.2 - Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges.-do- with one side prelam(P.No.106, I.No. 12.55.2 ,volume 2 2023-24)

21.22 - Provding and placing on terreace(at all floor level ) polyethylene water storage tank, IS: 12701 marked with cover and suitable locking arrangements and making necessary holes for inlet , outlet and overflow pipes but without fittings and the base support for tank (/Water supply SR/2021-22).

9.27 - Provding and placing on terreace(at all floor level ) polyethylene water storage tank, IS: 12701 marked with cover and suitable locking arrangements and making necessary holes for inlet , outlet and overflow pipes but without fittings and the base support for tank (/Water supply SR/2021-22

11.34B - Providing and fixing M.S grills of required pattern in frames of windows etc. with M.S flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding (P.N0.86/11.34B/ CSR/Volume-2/2023-24)

11.44 - Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings anddirection of Engineer-in-charge complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.(P.N0.91/11.44/ CSR/Volume-2/2023-24)

12.23 - Providing and fixing in position Honnewood fully panelled shutters for windows with stiles and rails of 35mm. thick, 75mm wide in two halves with panels of 25mm thick including cost of materials, labour charges, usage charges complete as per specifications. (excluding cost of fixtures)(P.N0.100/12.23/ CSR/Volume-2/2023-24)

2.1.4 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately)Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates(P.No. 15, I.No.2.1.4 ,Volume 1 2021-22)

6.2 - Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. (P.No. 13, I.No.6.2 of Volume SR 2 2023-24).

8.2.1 - Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:4 (1 cement: 4fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.(P.No. 41, I.No. 8.2.1 of Volume SR 2 2023-24 ).