Rural Development And Panchayat Raj Department Tender

code04 - Providing Brick work with common burnt clay Modular bricks of class designation 3.5 in foundation and plinth in all shapes and sizes in Cement mortar 1:6 1 cement : 6 coarse sand including cost of all materials, labour, scaffolding and usage charges of machinery and other incidental charges complete as per the direction of engineer incharge of work. ---- THE RATES INCLUDES ALL LEADS, LIFTS, LOADING, UNLOADING, COST AND CONVEYANCE OF ALL MATERIALS, LABOUR, EQUIPMENTS ETC COMPLETE AS PER THE DIRECTION OF THE ENGINEER IN CHARGE OF WORK

code05 - Providing and laying in position Cement Concrete for all Foundation works.The graniteortraporbasalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.MIX 1:3:6(M10) USING 20MM NOMINAL SIZE GRADED CRUSHED COARSE AGGREGATES ---- THE RATES INCLUDES ALL LEADS, LIFTS, LOADING, UNLOADING, COST AND CONVEYANCE OF ALL MATERIALS, LABOUR, EQUIPMENTS ETC COMPLETE AS PER THE DIRECTION OF THE ENGINEER IN CHARGE OF WORK

code06 - Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications ---- THE RATES INCLUDES ALL LEADS, LIFTS, LOADING, UNLOADING, COST AND CONVEYANCE OF ALL MATERIALS, LABOUR, EQUIPMENTS ETC COMPLETE AS PER THE DIRECTION OF THE ENGINEER IN CHARGE OF WORK

code07 - Providing and fixing granite stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in- charge and finished smooth ---- THE RATES INCLUDES ALL LEADS, LIFTS, LOADING, UNLOADING, COST AND CONVEYANCE OF ALL MATERIALS, LABOUR, EQUIPMENTS ETC COMPLETE AS PER THE DIRECTION OF THE ENGINEER IN CHARGE OF WORK

code08 - Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge ---- THE RATES INCLUDES ALL LEADS, LIFTS, LOADING, UNLOADING, COST AND CONVEYANCE OF ALL MATERIALS, LABOUR, EQUIPMENTS ETC COMPLETE AS PER THE DIRECTION OF THE ENGINEER IN CHARGE OF WORK

code09 - Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- THE RATES INCLUDES ALL LEADS, LIFTS, LOADING, UNLOADING, COST AND CONVEYANCE OF ALL MATERIALS, LABOUR, EQUIPMENTS ETC COMPLETE AS PER THE DIRECTION OF THE ENGINEER IN CHARGE OF WORK

code10 - Providing and fixing 10 mm thick acid and/or alkali resistant tiles of ap- proved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge. In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) with Acid and alkali resistant tile ---- THE RATES INCLUDES ALL LEADS, LIFTS, LOADING, UNLOADING, COST AND CONVEYANCE OF ALL MATERIALS, LABOUR, EQUIPMENTS ETC COMPLETE AS PER THE DIRECTION OF THE ENGINEER IN CHARGE OF WORK

code11 - Providing and fixing 10 mm thick acid and/or alkali resistant tiles of ap- proved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge. In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) with Acid and alkali resistant tile. ---- THE RATES INCLUDES ALL LEADS, LIFTS, LOADING, UNLOADING, COST AND CONVEYANCE OF ALL MATERIALS, LABOUR, EQUIPMENTS ETC COMPLETE AS PER THE DIRECTION OF THE ENGINEER IN CHARGE OF WORK

code12 - Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 40x410x265 mm sizes respectively ---- THE RATES INCLUDES ALL LEADS, LIFTS, LOADING, UNLOADING, COST AND CONVEYANCE OF ALL MATERIALS, LABOUR, EQUIPMENTS ETC COMPLETE AS PER THE DIRECTION OF THE ENGINEER IN CHARGE OF WORK

code13 - Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe ---- THE RATES INCLUDES ALL LEADS, LIFTS, LOADING, UNLOADING, COST AND CONVEYANCE OF ALL MATERIALS, LABOUR, EQUIPMENTS ETC COMPLETE AS PER THE DIRECTION OF THE ENGINEER IN CHARGE OF WORK

code14 - Providing to work spot rolling, lowering and placing in position RCC perforated rings in the already excavated pit including loading and unloading at both the destinations with all lead and lift with appurtenances 900 mmx1100 mm ---- THE RATES INCLUDES ALL LEADS, LIFTS, LOADING, UNLOADING, COST AND CONVEYANCE OF ALL MATERIALS, LABOUR, EQUIPMENTS ETC COMPLETE AS PER THE DIRECTION OF THE ENGINEER IN CHARGE OF WORK

code15 - Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge ---- THE RATES INCLUDES ALL LEADS, LIFTS, LOADING, UNLOADING, COST AND CONVEYANCE OF ALL MATERIALS, LABOUR, EQUIPMENTS ETC COMPLETE AS PER THE DIRECTION OF THE ENGINEER IN CHARGE OF WORK

code16 - Dismantling tiled roofing with battens boarding etc complete including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer in charge ---- THE RATES INCLUDES ALL LEADS, LIFTS, LOADING, UNLOADING, COST AND CONVEYANCE OF ALL MATERIALS, LABOUR, EQUIPMENTS ETC COMPLETE AS PER THE DIRECTION OF THE ENGINEER IN CHARGE OF WORK

code17 - Providing and fixing Steel work in built up tubular round, square or rectangular hollow tubes etc. trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge ---- THE RATES INCLUDES ALL LEADS, LIFTS, LOADING, UNLOADING, COST AND CONVEYANCE OF ALL MATERIALS, LABOUR, EQUIPMENTS ETC COMPLETE AS PER THE DIRECTION OF THE ENGINEER IN CHARGE OF WORK

code18 - Providing and fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete as per design drawings up to any pitch in horizontal/ vertical or curved surfaces , excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as per the direction of Engineer in charge. 0.63 mm thick with zinc coating not less than 275 g/ Sqm ---- THE RATES INCLUDES ALL LEADS, LIFTS, LOADING, UNLOADING, COST AND CONVEYANCE OF ALL MATERIALS, LABOUR, EQUIPMENTS ETC COMPLETE AS PER THE DIRECTION OF THE ENGINEER IN CHARGE OF WORK

code19 - Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure in all shapes and sizes in Cement mortar 1:6 1 cement : 6 coarse sand including cost of all materials, labour, scaffolding and usage charges of machinery and other incidental charges complete as per the direction of engineer incharge of work. ---- THE RATES INCLUDES ALL LEADS, LIFTS, LOADING, UNLOADING, COST AND CONVEYANCE OF ALL MATERIALS, LABOUR, EQUIPMENTS ETC COMPLETE AS PER THE DIRECTION OF THE ENGINEER IN CHARGE OF WORK

code20 - Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- THE RATES INCLUDES ALL LEADS, LIFTS, LOADING, UNLOADING, COST AND CONVEYANCE OF ALL MATERIALS, LABOUR, EQUIPMENTS ETC COMPLETE AS PER THE DIRECTION OF THE ENGINEER IN CHARGE OF WORK

code21 - Supplying and fixing new Mangalore tiles on existing reepers ---- THE RATES INCLUDES ALL LEADS, LIFTS, LOADING, UNLOADING, COST AND CONVEYANCE OF ALL MATERIALS, LABOUR, EQUIPMENTS ETC COMPLETE AS PER THE DIRECTION OF THE ENGINEER IN CHARGE OF WORK

code22 - Removing and fixing Old angalore tiles on existing reepers ---- THE RATES INCLUDES ALL LEADS, LIFTS, LOADING, UNLOADING, COST AND CONVEYANCE OF ALL MATERIALS, LABOUR, EQUIPMENTS ETC COMPLETE AS PER THE DIRECTION OF THE ENGINEER IN CHARGE OF WORK

code23 - Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- THE RATES INCLUDES ALL LEADS, LIFTS, LOADING, UNLOADING, COST AND CONVEYANCE OF ALL MATERIALS, LABOUR, EQUIPMENTS ETC COMPLETE AS PER THE DIRECTION OF THE ENGINEER IN CHARGE OF WORK

code24 - Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two coat applied @ 1.67 l/ 10 m²) on existing cement paint surface including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- THE RATES INCLUDES ALL LEADS, LIFTS, LOADING, UNLOADING, COST AND CONVEYANCE OF ALL MATERIALS, LABOUR, EQUIPMENTS ETC COMPLETE AS PER THE DIRECTION OF THE ENGINEER IN CHARGE OF WORK

code25 - Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- THE RATES INCLUDES ALL LEADS, LIFTS, LOADING, UNLOADING, COST AND CONVEYANCE OF ALL MATERIALS, LABOUR, EQUIPMENTS ETC COMPLETE AS PER THE DIRECTION OF THE ENGINEER IN CHARGE OF WORK

code26 - Providing and placing on terrace (at all floor levels) polyethylene water storage tank IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank ---- THE RATES INCLUDES ALL LEADS, LIFTS, LOADING, UNLOADING, COST AND CONVEYANCE OF ALL MATERIALS, LABOUR, EQUIPMENTS ETC COMPLETE AS PER THE DIRECTION OF THE ENGINEER IN CHARGE OF WORK

code27 - Providing and fixing polyvinyl chloride(CPVC) pipes having thermal stability for hot &cold water supply including all CPVC plain &brass threaded fittings including fixing the pipes with clamps at 1.00m spacing this includes jointing of pipes& fitting with one step CPVC solvent cement and testing of internal work - exposed on wall 20MM mm nominal dia pipes ---- THE RATES INCLUDES ALL LEADS, LIFTS, LOADING, UNLOADING, COST AND CONVEYANCE OF ALL MATERIALS, LABOUR, EQUIPMENTS ETC COMPLETE AS PER THE DIRECTION OF THE ENGINEER IN CHARGE OF WORK

code28 - Providing, laying & fixing cement base, precast, pre polished cement concrete, designer tiles 25mm thick conforming to IS 1237 heavy duty tiles for flooring, treads of steps and landing, laid on a bed of 12mm thick cement mortar 1:3 mis finished with flush pointing using white cement, including cost of materials, mortar, including cutting, griding the edge to half/full round wherever required, labour, curing complete as per specification ---- THE RATES INCLUDES ALL LEADS, LIFTS, LOADING, UNLOADING, COST AND CONVEYANCE OF ALL MATERIALS, LABOUR, EQUIPMENTS ETC COMPLETE AS PER THE DIRECTION OF THE ENGINEER IN CHARGE OF WORK

code29 - Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge ---- THE RATES INCLUDES ALL LEADS, LIFTS, LOADING, UNLOADING, COST AND CONVEYANCE OF ALL MATERIALS, LABOUR, EQUIPMENTS ETC COMPLETE AS PER THE DIRECTION OF THE ENGINEER IN CHARGE OF WORK