Rural Development And Panchayat Raj Department Tender

code04 - Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete including cost of all materials, loading and unloading, lead and lift charges cost of machinery and equipment and all other incidental charges for the successful completion of work etc., complete as per standard technical Specification and direction of the Engineer incharge of the work.

code05 - Supplying Fitting and placing TMT Fe 550 barReinforcement in substrcture complete as per Drawing and technical Specifications ---- etc., complete including cost of all materials, loading and unloading, lead and lift charges cost of machinery and equipment and all other incidental charges for the successful completion of work etc., complete as per standard technical Specification and direction of the Engineer incharge of the work.

code06 - Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M20 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 m3 capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including construction joints, primer, sealant , curing of concrete slabs for 14- days, and water finishing to lines and grade as per drawing and technical specification clause 1501 with all lead, lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments etc., complete. as per the directions of the Engineer-in-charge of the work ---- etc., complete including cost of all materials, loading and unloading, lead and lift charges cost of machinery and equipment and all other incidental charges for the successful completion of work etc., complete as per standard technical Specification and direction of the Engineer incharge of the work.

code07 - Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge & MoRTH specification 804 ---- etc., complete including cost of all materials, loading and unloading, lead and lift charges cost of machinery and equipment and all other incidental charges for the successful completion of work etc., complete as per standard technical Specification and direction of the Engineer incharge of the work.

code08 - arth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. In all kinds of soils Depth upto 1.5 m ---- etc., complete including cost of all materials, loading and unloading, lead and lift charges cost of machinery and equipment and all other incidental charges for the successful completion of work etc., complete as per standard technical Specification and direction of the Engineer incharge of the work.

code09 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates ---- etc., complete including cost of all materials, loading and unloading, lead and lift charges cost of machinery and equipment and all other incidental charges for the successful completion of work etc., complete as per standard technical Specification and direction of the Engineer incharge of the work.

code10 - Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- etc., complete including cost of all materials, loading and unloading, lead and lift charges cost of machinery and equipment and all other incidental charges for the successful completion of work etc., complete as per standard technical Specification and direction of the Engineer incharge of the work.

code11 - Supplying Fitting and placing TMT Fe 550 barReinforcement in substrcture complete as per Drawing and technical Specifications ---- etc., complete including cost of all materials, loading and unloading, lead and lift charges cost of machinery and equipment and all other incidental charges for the successful completion of work etc., complete as per standard technical Specification and direction of the Engineer incharge of the work.

code12 - Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bracing, using sight rails & boning rods at every 100 mm whevere necessary as directed, removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench to the extent required , utilising the available excavated earth locally for the work etc., and all other appurtenances complete in the following strata. All kinds of soils Depth upto 1.50m ---- etc., complete including cost of all materials, loading and unloading, lead and lift charges cost of machinery and equipment and all other incidental charges for the successful completion of work etc., complete as per standard technical Specification and direction of the Engineer incharge of the work.

code13 - Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: PVC pipes 63mm dia., 6 kg/sqcm & class 3 ---- etc., complete including cost of all materials, loading and unloading, lead and lift charges cost of machinery and equipment and all other incidental charges for the successful completion of work etc., complete as per standard technical Specification and direction of the Engineer incharge of the work.

code14 - Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5 m. Including cost of all labour complete as per specifications ---- etc., complete including cost of all materials, loading and unloading, lead and lift charges cost of machinery and equipment and all other incidental charges for the successful completion of work etc., complete as per standard technical Specification and direction of the Engineer incharge of the work.