Rural Development And Panchayat Raj Department Tender

Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including allfittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc in cluding making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge (P.No.128 I.No. 14.47 o f bld SR 2022)

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.(P.No.125 I.No.:14.22A o f Bld SR 2022)

Providing and installing at site of work P.V.C. pipes includingcost of pipes and specials and labour, including lowering intotrenches, laying true to line, level and perfect linking at jointsleak proof including jointing of approved type with all labourcharges and all lift charges, handling charges includingencasing the pipe around to a depth not less than 15 cms with gravel or selected earth available from the excavation etc.complete.(It No :- 10.04.1 (c) P.No - 78)25mm

Repairs to plaster in patches of 2.5 m2 and less in walls, ceiling 10to 20mm thick in cement mortar 1:3 includicuttingthepatchesipropershapeareplastering the surface of the wall including disposal of rubbish with a lead of 50m including curing cost of materials, labour, complete as per specification.. (P.No.180, I.No. 20.88 of bld SR 2022)

Extra for removing white wash or colour wash by steel brushing and / or scraping, sand papering the ceiling and / or sloping roof surface smooth including repairs to scraches, cost of material, labour, complete as per specifications (P.No. 179 I.No. 20.51 of bld SR 2022)

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust,mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (P.No:105, I.No. 8.25 of Bld SR 2022).

Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, thensurface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs. 4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this drysurface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish andmelamine thinner mixed in required proportioncomplete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.)(P.No.55, I.No. 8.83 of bld SR 2022).

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. (P.No.50, I.No. 8.51 of Bld SR 2022).

Providing and fixing 100mm wide venitian blinds of window fashion fabric of Taiwan make, with 50mm thick powder coated channel with balance, imported, acrylic self alignable mechanism and equally placed spacers, imported tilting mechanism for easy tilting operation,with nylon imported thread and beadings, 100mm wide imported washable reusable fabric placed with top hanger and bottom with 100mm long bottom plate connected to nylon imported bottom link chain. The rate is inclusive of drilling holes for fixing channels to the wall, fixing threads and beadings and link chains, hard ware fixtures etc., complete as per drawing, specifications. (P.No. 312, I.No. 39.11 of CSR 2018-19)