Rural Development And Panchayat Raj Department Tender

PNO-9,I.NO-5.3, VOI-2,PWD SR 2023-24 - Providing Coursed rubble masonry (second sort) with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : ---- All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing forconcrete works, cost and conveyance of all material and all other such incidental charges necessary for successful completionof works as per the detailed technical specification and direction of Engineer in charge of this work

PNO-9,I.NO-5.4, VOI-2,PWD SR 2023-24 - Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) ---- All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing forconcrete works, cost and conveyance of all material and all other such incidental charges necessary for successful completionof works as per the detailed technical specification and direction of Engineer in charge of this work

PNO-7,I.NO-1.9, VOI-1,PWD SR 2023-24 - Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations and other similar works etc. in layers not exceeding20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m ---- All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing forconcrete works, cost and conveyance of all material and all other such incidental charges necessary for successful completionof works as per the detailed technical specification and direction of Engineer in charge of this work

PNO-44,I.NO-8.19.1, VOI-2,PWD SR 2023-24 - Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per specification and as per directions of Engineer-in-charge ---- All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing forconcrete works, cost and conveyance of all material and all other such incidental charges necessary for successful completionof works as per the detailed technical specification and direction of Engineer in charge of this work

PNO-15,I.NO-2.2.1.1, VOI-1PWD SR 2023-24 - Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separatelyM20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing forconcrete works, cost and conveyance of all material and all other such incidental charges necessary for successful completionof works as per the detailed technical specification and direction of Engineer in charge of this work

PNO-15,I.NO-2.3.1, VOI-1PWD SR 2023-24 - Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separatelyM20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing forconcrete works, cost and conveyance of all material and all other such incidental charges necessary for successful completionof works as per the detailed technical specification and direction of Engineer in charge of this work

PNO-17,I.NO-2.5.1, VOI-1PWD SR 2023-24 - Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregatesRCC Columns ---- All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing forconcrete works, cost and conveyance of all material and all other such incidental charges necessary for successful completionof works as per the detailed technical specification and direction of Engineer in charge of this work

PNO-17,I.NO-2.5.1, VOI-1PWD SR 2023-24 - Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregatesLintel ---- All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing forconcrete works, cost and conveyance of all material and all other such incidental charges necessary for successful completionof works as per the detailed technical specification and direction of Engineer in charge of this work

PNO-17,I.NO-2.5.1, VOI-1PWD SR 2023-24 - Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Beam ---- All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing forconcrete works, cost and conveyance of all material and all other such incidental charges necessary for successful completionof works as per the detailed technical specification and direction of Engineer in charge of this work

PNO-17,I.NO-2.5.1, VOI-1PWD SR 2023-24 - Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Roof ---- All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing forconcrete works, cost and conveyance of all material and all other such incidental charges necessary for successful completionof works as per the detailed technical specification and direction of Engineer in charge of this work

PNO-17,I.NO-2.5.1, VOI-1PWD SR 2023-24 - Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Chejja ---- All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing forconcrete works, cost and conveyance of all material and all other such incidental charges necessary for successful completionof works as per the detailed technical specification and direction of Engineer in charge of this work

PNO-14,I.NO-6.8, VOI-2,PWD SR 2023-24 - Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work ---- All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing forconcrete works, cost and conveyance of all material and all other such incidental charges necessary for successful completionof works as per the detailed technical specification and direction of Engineer in charge of this work

P.No.18I.No.2.11 a of CSR 2023-24, Volume-I - Supplying, fitting and placing TMT FE 550 /550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints,tying with binding wire/ soft annealed steel wire and other ancilary operations complete as per drawing and technical specifications ---- All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing forconcrete works, cost and conveyance of all material and all other such incidental charges necessary for successful completionof works as per the detailed technical specification and direction of Engineer in charge of this work

PNO-15,I.NO-2.1.4, VOI-1PWD SR 2023-24 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately)Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates ---- All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing forconcrete works, cost and conveyance of all material and all other such incidental charges necessary for successful completionof works as per the detailed technical specification and direction of Engineer in charge of this work

P.No.82, I.No. 11.26.3 of PWD SR 2023-24, Volume-I - Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer- in-Charge ---- All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing forconcrete works, cost and conveyance of all material and all other such incidental charges necessary for successful completionof works as per the detailed technical specification and direction of Engineer in charge of this work

PNO-100,I.NO-12.12, PWD SR Vol-2 2023-24 - Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications. ---- All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing forconcrete works, cost and conveyance of all material and all other such incidental charges necessary for successful completionof works as per the detailed technical specification and direction of Engineer in charge of this work

PNO-100,I.NO-12.15, PWD SR Vol-2 2023-24 - Providing and fixing in position fully panelled Mathi/Nandi wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures ---- All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing forconcrete works, cost and conveyance of all material and all other such incidental charges necessary for successful completionof works as per the detailed technical specification and direction of Engineer in charge of this work

PNO-85,I.NO-11.34B,VOI-2 PWD SR 2023-24 - Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc ---- All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing forconcrete works, cost and conveyance of all material and all other such incidental charges necessary for successful completionof works as per the detailed technical specification and direction of Engineer in charge of this work

PNO-87,I.NO-11.35.2.3, PWD SR Vol-1 2023-24 - Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitraed and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) including cost of materials, labour, usage charges of machinery complete as per specifications ---- All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing forconcrete works, cost and conveyance of all material and all other such incidental charges necessary for successful completionof works as per the detailed technical specification and direction of Engineer in charge of this work

PNO-60,I.NO-9.12.2, VOI-2,PWD SR 2023-24 - Providing and laying vitrified floor tiles in different sizes(thickness to be secified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., Size of Tile 600x600 mm complete ---- All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing forconcrete works, cost and conveyance of all material and all other such incidental charges necessary for successful completionof works as per the detailed technical specification and direction of Engineer in charge of this work

PNO-60,I.NO-9.11, VOI-2,PWD SR 2023-24 - Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. ---- All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing forconcrete works, cost and conveyance of all material and all other such incidental charges necessary for successful completionof works as per the detailed technical specification and direction of Engineer in charge of this work

P.No, I.No. 8.4.1 of PWD SR 2023-24, Volume-II - Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.. ---- All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing forconcrete works, cost and conveyance of all material and all other such incidental charges necessary for successful completionof works as per the detailed technical specification and direction of Engineer in charge of this work

PNO-41,I.NO-8.5.2, VOI-2,PWD SR 2023-24 - Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing forconcrete works, cost and conveyance of all material and all other such incidental charges necessary for successful completionof works as per the detailed technical specification and direction of Engineer in charge of this work

PNO-42,I.NO-8.9, VOI-2,PWD SR 2023-24 - Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing forconcrete works, cost and conveyance of all material and all other such incidental charges necessary for successful completionof works as per the detailed technical specification and direction of Engineer in charge of this work

PNO-45,I.NO-8.25, VOI-2,PWD SR 2023-24 - Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.. ---- All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing forconcrete works, cost and conveyance of all material and all other such incidental charges necessary for successful completionof works as per the detailed technical specification and direction of Engineer in charge of this work

PNO-45,I.NO-8.28, VOI-2,PWD SR 2023-24 - Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing forconcrete works, cost and conveyance of all material and all other such incidental charges necessary for successful completionof works as per the detailed technical specification and direction of Engineer in charge of this work

BWSSB SR-2021-22, PA.NO.134 I.NO.1.7, M010G, VOL-4 - Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for:PVC pipes 75mm dia., 6 kg/sqcm & class 3 ---- All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing forconcrete works, cost and conveyance of all material and all other such incidental charges necessary for successful completionof works as per the detailed technical specification and direction of Engineer in charge of this work

PNO-49,I.NO-8.49, VOI-2,PWD SR 2023-24 - Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge ---- All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing forconcrete works, cost and conveyance of all material and all other such incidental charges necessary for successful completionof works as per the detailed technical specification and direction of Engineer in charge of this work

P.No.2 I.No. 1.2.2 of CSR 2023-24, Volume-6 - SupplyingheavygaugePVCconduitpipe......mmdia..........mmthick confirming toIS2509withsuitablesizebends,metal/PVCJunctionboxes,adhesivepasteetc.,andrunningbeforeconcretingtheslab. The conduit shouldbe tied to the reinforcement rods byusingbinding wiresandunusedwaysof junction boxesandpipeends should be covered usingPVCendenclosures, runwith18SWGGI fishwire wherever necessary.25 mm dia 2 mm thick ---- All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing forconcrete works, cost and conveyance of all material and all other such incidental charges necessary for successful completionof works as per the detailed technical specification and direction of Engineer in charge of this work

PNO-2,I.NO-1.3.2, PWD SR Vol-6 2023-24 - Supplying heavy gauge PVCConduit Pip..... dia ....mm thick thsuitablesizebends,metaljunctionboxesadhesivepasteetc.,by groovecuttinginthewall andfixing bybracingUor Jhooks and asteringuptothewallsurfaceandrunwith18SWGGIfish wire run throughout the conduit wherever necessary. 25 mm dia 2 mm thic ---- All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing forconcrete works, cost and conveyance of all material and all other such incidental charges necessary for successful completionof works as per the detailed technical specification and direction of Engineer in charge of this work

P.No.15 I.No.2.1.3 of CSR 2023-24, Volume-6 - Supplying and fixing PVC/metal conduit Deep junction box 25 mm deep Junction box ---- All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing forconcrete works, cost and conveyance of all material and all other such incidental charges necessary for successful completionof works as per the detailed technical specification and direction of Engineer in charge of this work

P.No.15 I.No.3.4.4 of CSR 2023-24, Volume-6 - Supplyingandflushmountingpowdercoated/galvanizedmetalboxsuitableformountingmodularswitchplates.Theboxshouldbefirmly flush mounted after due groove cutting in Brick/Stone/C.C wall 6 Way ---- All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing forconcrete works, cost and conveyance of all material and all other such incidental charges necessary for successful completionof works as per the detailed technical specification and direction of Engineer in charge of this work

P.No.15 I.No.3.5.4 of CSR 2023-24, Volume-6 - Supplying and fixing superior quality modular switch mountingpolycarbonateplatewithnecessarysupportingbackplatewithrequired nos. ofmachine screws, bolts nuts etc., complete on the existing metal/PVC box. 6module ---- All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing forconcrete works, cost and conveyance of all material and all other such incidental charges necessary for successful completionof works as per the detailed technical specification and direction of Engineer in charge of this work

P.No.9 I.No. 3.6.4 of CSR 2023-24, Volume-6 - Supplyingandfixingofmodular switch&connectedaccessorieson existing modular switch plate as per IS 3854 and IS 1293. Stepped fan Rectangular Two Module ---- All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing forconcrete works, cost and conveyance of all material and all other such incidental charges necessary for successful completionof works as per the detailed technical specification and direction of Engineer in charge of this work

P.No.4I.No. 1.13 of CSR 2023-24, Volume-6 - Supplying And Fixing Metal Fan Box with Round Hook. ---- All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing forconcrete works, cost and conveyance of all material and all other such incidental charges necessary for successful completionof works as per the detailed technical specification and direction of Engineer in charge of this work

P.No.30 I.No. 6.3.1 of CSR 2023-24, Volume-6 - Supplyingcapacitor type ceiling fan complete with down rod blades, shackle,canopies etc,for operation on 230V,50cycles. Single phase Acsupply conforming to ISS-374-1979 and with double ball bearing system. ---- All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing forconcrete works, cost and conveyance of all material and all other such incidental charges necessary for successful completionof works as per the detailed technical specification and direction of Engineer in charge of this work

P.No.48 I.No. 11.11.5 of CSR 2023-24, Volume-6 - Supplying&fixingof retrofittypeLEDbulb..WwithOPALacrylic diffusercomprising ofLEDsourcewithCCT6500degree K,CRI70%.efficacy80lumenperW,life25000burninghoursandCompliance toIS 10322/IEC60598,LM79&LM80.TheLEDaredrivenbyHFelectronic driver integratedinthesystem,withPF0.95,power lossshould5%of lampWage., short circuit&opencircuitprotectiontobe integrated inthe circuit,THDlessthan20%,LifeasperLM79.Theoperatinginputvoltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition.12W, 6500K ---- All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing forconcrete works, cost and conveyance of all material and all other such incidental charges necessary for successful completionof works as per the detailed technical specification and direction of Engineer in charge of this work

P.No.54 I.No.12.56 of CSR 2023-24, Volume-6 - Supplying,fixing,wiring,earthelectrodeforgroundingconduits, I.C. cutoutsandotherequipment'sonthemeterboardusing40mmdia2.90mmthickGIpipe2.5mlongburiedinapitThepitshouldbefilledwithequalproportionofsaltandcharcoal150mmallroundthepipetocompletedepth.Theconnectionfromthepipetotheconduietc.,istobeestablishedthroughGIwireofsizeasperlSIspecification7.3.3.ofIS732using12mmdiabolts,nuts,washersandchecknuts etc., the pipe shall have 16 through holes of 12 mm dia ---- All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing forconcrete works, cost and conveyance of all material and all other such incidental charges necessary for successful completionof works as per the detailed technical specification and direction of Engineer in charge of this work

P.No.54I.No.12.58.3 of CSR 2023-24, Volume-6 - GI/Copper strips for grounding connections, usingnecessary fixing materials as required 25 x 6 mm GI strip ---- All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing forconcrete works, cost and conveyance of all material and all other such incidental charges necessary for successful completionof works as per the detailed technical specification and direction of Engineer in charge of this work

P.No.18I.No.5.19.3 of CSR 2023-24, Volume-6 - Supplyingand fixing regularMCBdistributionboards onwall/ood board/ flushmountingusingrequiredclamps, bolts, nuts etc.,with provision for fixing suitable type capacityMCB's single phase/3ngMadeoutof14SWG MS enclosure ---- All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing forconcrete works, cost and conveyance of all material and all other such incidental charges necessary for successful completionof works as per the detailed technical specification and direction of Engineer in charge of this work