Rural Development And Panchayat Raj Department Tender

code04 - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 25 mm nominal dia Pipes ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.

code05 - Providing and fixing brass bib cock of approved quality : 20 mm nominal bore. ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.

code06 - Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For:PVC pipes 63mm dia., 6 kg/sqcm & class 3 ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.

code07 - Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.

code08 - Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete. ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.

code09 - Repairing and fixing shutters (panelled or glazed) to doors, windows, ventilators and cupboards ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.

code10 - Finishing walls with water proofing cement paint of required shade :Newwork (Two coats applied @ 4.84 kg/10 m²) to give an even shade afterthoroughly brooming the surface to remove all dirt, dust, mortar dropsand foreign matter including preparing the surface even and sand papersmooth, cost of materials, labour complete as per specifications and as perdirections of Engineer-in-charge. ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.

code11 - Post Metric Girls Hostel Jigenahalli Town (BCWD-1034), Covering Fiber Sheet Over Open Space & repair of door windows.Providing and fixing 6mm Clear/opal white/solar bronze/blue/green tinted Multi wall poly carbonate sheet for Tubular structure. The work including cost of all materials, labour charges and usage charges of machinery for cutting, welding, grinding and erection equipments, with all lead, transportation, loading and unloading and all other incidental charges etc. complete as per specification and directions of the Engineer in charge of the work ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.

code12 - Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.

code13 - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 25 mm nominal dia Pipes ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.

code14 - Providing and fixing brass bib cock of approved quality : 20 mm nominal bore ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.

code15 - Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. complete For:PVC pipes 63mm dia., 6 kg/sqcm & class 3 ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.

code16 - Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.

code17 - Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.

code18 - Providing & fixing reinforced by organic fibres and/or inorganic synthetic fibres cement 6 mm thick corrugated sheets (as per IS: 14871) roofing up to any pitch and fixing with polymer coated J, or L hooks, bolts and nuts 8 mm dia. G.I. plain and bitumen washers or with self drilling fastener and EPDM washers etc. complete (excluding the cost of purlins, rafters and trusses), including cutting sheets to size and shape wherever required as per design drawings ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.

code19 - Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour,usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.

code20 - Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.

code21 - PROVIDING TRAPEZOIDAL PROFILED SHEET Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch ofcorrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coatedthickness with zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steelgrade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineer-in-charge. The sheet shall be fixed usingselfdrilling/selftapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins,rafters and trusses and including cutting to size and shape wherever required ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.