Rural Development And Panchayat Raj Department Tender

code04 - Shuttering work , Isolated foundation of Builduing percentageon finished rate of conerete per m3 is FR 8 with all lead lifts loading & unloading charges including cost and conveyance of all materials, labour, equipments, HOM of machinary and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer-in-charge of the work

code05 - Providing Coursed rubble masonry second sort with hard stone in foundation & plinth with Cement mortar 1:6 1 cement : 6 coarse sand with all lead lifts loading & unloading charges including cost and conveyance of all materials labour, equipments, HOM of machinary and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer-in-charge of the work

code06 - Filling approved earth excluding rock in trenches plinth sides of foundations and other similar works etc in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m with all lead lifts loading & unloading charges including cost and conveyance of all materials, labour, equipments, HOM of machinary and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer-in-charge of the work

code07 - Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all otherappurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates with all lead, lifts, loading & unloading charges including cost and conveyance of all materials, labour, equipments, HOM of machinary and other incidental charges required for successfull completion of work etc., complete as per specifications and as per the directions of the Engineer-in-charge of the work

code08 - Formwork,Centering & Scaffolidingwork, Column of Builduing with all lead, lifts, loading & unloading charges including cost and conveyance of all materials, labour, equipments, HOM of machinary and other incidental charges required for successfull completion of work etc., complete as per specifications and as per the directions of the Engineer-in-charge of the work

code09 - Formwork,Centering & Scaffoliding work , Plint beam of Builduing (Rate is revasied As per Corrigendum -3) with all lead, lifts, loading & unloading charges including cost and conveyance of all materials, labour, equipments, HOM of machinary and other incidental charges required for successfull completion of work etc., complete as per specifications and as per the directions of the Engineer-in-charge of the work

code10 - Providing and laying in position Reinforced cement concrete for all Super structures of building Road works Water works Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.-M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates The cost of steel reinforcement, dowel bars & formwork to be paid separately) with all lead, lifts, loading & unloading charges including cost and conveyance of all materials, labour, equipments, HOM of machinary and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer-in-charge of the work

code11 - Formwork,Centering & Scaffoliding work for Roof slab, of Builduing (Rate is revaised As per Corrigendum 3 with all lead lifts, loading & unloading charges including cost and conveyance of all materials, labour equipments HOM of machinary and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer-in-charge of the work

code12 - Formwork,Centering & Scaffoliding work for Roof slab, of Builduing (Rate is revaised As per Corrigendum 3 with all lead lifts loading & unloading charges including cost and conveyance of all materials labour equipments HOM of machinary and other incidental charges required for successfull completion of work etc., complete as per specifications and as per the directions of the Engineer-in-charge of the work

code13 - Supplying, and fitting placing TMT EF 550 550D steel reinforcement including cost of all materials, machinery labour,cleaning,straightening cutting bending hucking laping welding joints,trying with binding wire soft anneled steel wireand other ancilary operations complete asper drawing and technical specification a- building with all lead lifts loading & unloading charges including cost and conveyance of all materials, labour, equipments, HOM of machinary and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer-in-charge of the work

code14 - Providing Brick work with common burnt clay machine moulded perforated bricks of class designation 5.0 conforming to IS: 2222 in superstructure above plinth level in cement mortar 1:6 (1 cement : 6 coarse sand) With Non modular bricks including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work with all lead, lifts, loading & unloading charges including cost and conveyance of all materials, labour, equipments, HOM of machinary and other incidental charges required for successfull completion of work etc., complete as per specifications and as per the directions of the Engineer-in-charge of the work

code15 - Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 1 cement: 3 fine sand to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge with all lead lifts loading & unloading charges including cost and conveyance of all materials, labour, equipments, HOM of machinary and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer-in-charge of the work

code16 - Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge with all lead, lifts, loading & unloading charges including cost and conveyance of all materials, labour, equipments, HOM of machinary and other incidental charges required for successfull completion of work etc., complete as per specifications and as per the directions of the Engineer-in-charge of the work

code17 - Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge with all lead, lifts, loading & unloading charges including cost and conveyance of all materials, labour, equipments, HOM of machinary and other incidental charges required for successfull completion of work etc., complete as per specifications and as per the directions of the Engineer-in-charge of the work

code18 - Painting wood work with Deluxe Multi Surface Paint of required shade Two coat applied 0.90L 10 m over an under coat of primer applied 0.75 L 10 m of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials labour complete as per specifications and as per directions of Engineer-in-charge with all lead lifts loading & unloading charges including cost and conveyance of all materials labour equipments, HOM of machinary and other incidental charges required for successfull completion of work etc., complete as per specifications and as per the directions of the Engineer-in-charge of the work

code19 - Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls 1.25 L 10 m over and including one coat of Special primer applied 0.75 L 10 m with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge The gloss should be 50% 60 degree angle with 10 years life) with all lead, lifts, loading & unloading charges including cost and conveyance of all materials, labour, equipments, HOM of machinary and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer-in-charge of the work

code20 - Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt & pick up resistant Alkali & Water resistant of required shade: New work (Two coats applied 1.43 L 10 m over and including priming coat of exterior primer applied 2.20 kg/10 m with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge with all lead, lifts, loading & unloading charges including cost and conveyance of all materials, labour, equipments, HOM of machinary and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer-in-charge of the work

code21 - Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames wrought framed or assembled including making plaster groves excluding cost of cement concrete and side clamps but including cost of materials, labour usage charges complete as per specifications with all lead, lifts, loading & unloading charges including cost and conveyance of all materials labour equipments, HOM of machinary and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer-in-charge of the work

code22 - Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour usage charges complete as per specifications excluding cost of fixtures with all lead lifts loading & unloading charges including cost and conveyance of all materials labour equipments, HOM of machinary and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer-in-charge of the work

code23 - Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket perforated aluminium spacers, desiccants sealant (Both primary and secondary sealant etc as per specifications, drawings and direction of Engineer-in-charge complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge with all lead, lifts, loading & unloading charges including cost and conveyance of all materials, labour, equipments, HOM of machinary and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer-in-charge of the work

code24 - Providing and fixing M.S. grills of required pattern in frames of windows etc with M.S. flats square or round bars etc including priming coat with approved steel primer all complete. Fixed to steel windows by welding with all lead, lifts, loading & unloading charges including cost and conveyance of all materials, labour, equipments, HOM of machinary and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer-in-charge of the work

code25 - Providing & fixing fly proof wire gauze to windows, clerestory windows& doors with M.S. Flat 15x3 mm and nuts & bolts complete. Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides including cost of materials, labour usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge with all lead, lifts, loading & unloading charges including cost and conveyance of all materials, labour, equipments, HOM of machinary and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer-in-charge of the work

code26 - Providing White washing with lime to give an even shade New work three coats with lime of approved quality including cost of materials labour complete as per specifications and as per directions of Engineer- in-charge with all lead, lifts, loading & unloading charges including cost and conveyance of all materials, labour equipments, HOM of machinary and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer-in-charge of the work

code27 - Providing and laying Vitrified tiles in different sizes thickness to be specified by manufacturer with water absorption less than 0.08 and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry 3.3 kg m including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm with all lead, lifts, loading & unloading charges including cost and conveyance of all materials labour equipments HOM of machinary and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer-in-charge of the work