Rural Development And Panchayat Raj Department Tender

code04 - Providing and laying vitrified floor tiles in 600mmx600mm sizes thickness to be specified by the manufacturer) with water absorption less than 0.08 and conforming to IS: 15622 of approved make, in all colours and shades laid on 20mm thick cement mortar 1:4 1 cement 4 coarse sand jointing with grey cement slurry 3.3 kg Sqm including grouting the joints with white cement and matching pigments etc complete with all lead lifts loading & unloading charges including cost and conveyance of all materials labour equipments HOM of machinary and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer-in-charge of the work

code05 - Providing and laying in position plain cement concrete for leveling course for all works in foundation The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators including all lead & lifts cost of all materials of quality labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. Formwork included and The cost of steel reinforcement shall be paid separately Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates with all lead lifts loading & unloading charges including cost and conveyance of all materials labour equipments HOM of machinary and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer-in-charge of the work

code06 - Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground to the appropriate disposal area as per direction of Engineer-in-charge with all lead lifts loading & unloading charges including cost and conveyance of all materials labour equipments HOM of machinary and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer-in-charge of the work

code07 - Providing 12 mm cement plaster with cement mortar 1:4 1 cement 4 fine sand to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge with all lead lifts loading & unloading charges including cost and conveyance of all materials labour equipments HOM of machinary and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer-in-charge of the work

code08 - Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge with all lead lifts loading & unloading charges including cost and conveyance of all materials labour equipments HOM of machinary and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer-in-charge of the work

code09 - Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work two coats over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt dust mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials labour complete as per specifications and as per directions of Engineer-in-charge with all lead lifts loading & unloading charges including cost and conveyance of all materials labour equipments HOM of machinary and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer-in-charge of the work

code10 - Providing and fixing Steel work in built up tubular round square or rectangular hollow tubes etc trusses etc including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer including welding and bolted with special shaped washers etc complete. Hot finished welded type tubes including cost of materials, labour usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge with all lead lifts loading & unloading charges including cost and conveyance of all materials labour equipments HOM of machinary and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer-in-charge of the work

code11 - Providing & fixing corrugated G.S. sheet roofing including vertical curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete as per design drawings up to any pitch in horizontal vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as per the direction of Engineer in charge. 0.63 mm thick with zinc coating not less than 275 g m with all lead lifts loading & unloading charges including cost and conveyance of all materials labour equipments HOM of machinary and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer-in-charge of the work

code12 - Providing & fixing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete as per design drawings.0.63 mm thick with zinc coating not less than 275 g sqm with all lead lifts loading & unloading charges including cost and conveyance of all materials labour equipments HOM of machinary and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer-in-charge of the work

code13 - Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge The door frame to be fixed to the wall using M.S. Screws of 65 80mm size complete as per manufacturers specification & direction of Engineer-in-charge with all lead lifts loading & unloading charges including cost and conveyance of all materials labour equipments HOM of machinary and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer-in-charge of the work

code14 - Providing & fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S tube of 19 gauge thickness size 19x19mm for stiles and 15x15mm for top & bottom rails, covered with heat moulded PVC C channel of 5mm thick sheet & 30 x 50mm wide to form stiles & 5mm thick & 75mm wide PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick 20mm wide PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet fitted in the M.S Frame, Sealed to the stiles & rails with 5x30mm PVC sheet beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75 mm Aluminium hinges with all lead lifts loading & unloading charges including cost and conveyance of all materials labour equipments HOM of machinary and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer-in-charge of the work

code15 - Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats square or round bars etc. including priming coat with approved steel primer all complete Fixed to openings wooden frames with rawl plugs screws etc with all lead lifts loading & unloading charges including cost and conveyance of all materials labour equipments HOM of machinary and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer-in-charge of the work

code16 - Providing and fixing water closet squatting pan Indian type W.C. pan with 100 mm sand cast Iron P or S trap 10 litre low level white P.V.C. flushing cistern, including flush pipe with manually controlled device handle lever conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C pan of size 580x440 mm with integral type foot rests with all lead lifts loading & unloading charges including cost and conveyance of all materials labour equipments HOM of machinary and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer-in-charge of the work

code17 - Earth work excavation for pipelines cables by Manual means upto 600 mm trench width as per drawing and technical specifications, including setting out shoring, strutting, barricading caution lights removal of stumps and other deleterious matter including dressing of excavated surfaces disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m Filling available excavated earth excluding rock in trenches plinth sides of foundations etc in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour tools usage & other appurtenances required to complete the work. In all kinds of soils. Depth upto 1.50m with all lead lifts loading & unloading charges including cost and conveyance of all materials labour equipments HOM of machinary and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer-in-charge of the work

code18 - Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite rolling and lowering into trenches laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever ecessary including jointing of PVC pipes and specials excluding cost of specials with jointing of approved type with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS Contractor will make his own arrangements for procuring water for testing etc complete For PVC pipes 110mm dia 6 kg sqcm & class 3 with all lead lifts loading & unloading charges including cost and conveyance of all materials labour equipments HOM of machinary and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer-in-charge of the work

code19 - Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite rolling and lowering into trenches laying true to line and level and perfect linking at joints testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials excluding cost of specials with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS Contractor will make his own arrangements for procuring water for testing) etc. complete For PVC pipes 32mm dia., 10 kg sqcm & class 5 with all lead lifts loading & unloading charges including cost and conveyance of all materials labour equipments HOM of machinary and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer-in-charge of the work

code20 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to GTP of GROUP -A. 2.5 sqmm with all lead lifts loading & unloading charges including cost and conveyance of all materials labour equipments HOM of machinary and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer incharge of the work with all lead lifts loading & unloading charges including cost and conveyance of all materials labour equipments HOM of machinary and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer-in-charge of the work

code21 - Supplying and fixing surface flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick C.C wall including necessary rawl plugs Machine NF screws etc complete with all lead lifts loading & unloading charges including cost and conveyance of all materials labour equipments HOM of machinary and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer-in-charge of the work

code22 - Supplying capacitor type ceiling fan complete with down rod blades shackle canopies etc for operation on 230 volts 50 cycles Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system 48 Sweep 1200mm Regular model with all lead lifts loading & unloading charges including cost and conveyance of all materials labour equipments HOM of machinary and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer incharge of the work with all lead lifts loading & unloading charges including cost and conveyance of all materials labour equipments HOM of machinary and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer-in-charge of the work

code23 - Supplying fixing and wiring earth electrode for grounding of lifts transformers DG sets etc using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode The funnel should be enclosed in a CC chamber of 400x400x400mm with a cast iron cover The earth electrode shall have staggered holes of 12mm dia and the electrode should be covered 150mm all-round with alternate layers of salt and charcoal from the bottom of the CC chamber The connection from the electrode is to be established through GI strip using GI bolts and nutswith all lead lifts loading & unloading charges including cost and conveyance of all materials labour equipments HOM of machinary and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer incharge of the work with all lead lifts loading & unloading charges including cost and conveyance of all materials labour equipments HOM of machinary and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer-in-charge of the work

code24 - Supplying and fixing of modular switch Socketstepped electronic fan regulator dimmertelephone socket etc on existing modular switch plate as per IS 3854 and IS 1293 GROUP A 6Amps 3way socket. with all lead, lifts, loading & unloading charges including cost and conveyance of all materials labour, equipments, HOM of machinary and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer incharge of the work with all lead lifts loading & unloading charges including cost and conveyance of all materials labour equipments HOM of machinary and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer-in-charge of the work

code25 - Supplying & fixing LED Drivers suitable for 5700K LED fitting Indoor Fixtures Operating voltage range from 180V to 265V 50Hz AC power Supply Installation of 4 Fit 28W Led Fitting with Copper flexible 28W 5700K suitable for indoor LED fitting with all lead lifts loading & unloading charges including cost and conveyance of all materials labour equipments HOM of machinary and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer-in-charge of the work

code26 - Providing and laying 60mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Cycle Tracks & Pedestrian Footpaths of approved shape and colour laid in required pattern and including over 30mm thick compacted bed of coarse sand filling the joints with fine sand etc all complete as per the direction of Engineer-incharge WMM WBM Base to be paid separately if necessary as per relevant technical specification with all lead lifts loading & unloading charges including cost and conveyance of all materials labour equipments HOM of machinary and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer-in-charge of the work

code27 - Providing and laying in position plain cement concrete for leveling course for all works in foundation The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed laid in layers not exceeding 150 mm thickness well compacted using plate vibrators including all lead & lifts cost of all materials of quality, labour Usage charges of machineries curing and all the other appurtenances required to complete the work as per technical specifications. Formwork included and The cost of steel reinforcement shall be paid separately Mix 1:3:6 M10 Using 40 mm nominal size graded crushed coarse aggregates with all lead lifts loading & unloading charges including cost and conveyance of all materials labour equipments HOM of machinary and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer-in-charge of the work