Rural Development And Panchayat Raj Department Tender

code04 - Providing & fixing corrugated G.S. sheet roofing including vertical curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete as per design drawings up to any pitch in horizontal vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as per the direction of Engineer in charge. 0.63 mm thick with zinc coating not less than 275 g/ sqm with all lead, lifts loading & unloading charges including cost and conveyance of all materials, labour, equipments, HOM of machinary and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer-in-charge of the work

code05 - Providing & fixing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete as per design drawings.0.63 mm thick with zinc coating not less than 275 g Sqm with all lead lifts, loading & unloading charges including cost and conveyance of all materials, labour, equipments, HOM of machinary and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer-in-charge of the work

code06 - Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge The door frame to be fixed to the wall using M.S. Screws of 65 80mm size complete as per manufacturers specification & direction of Engineer-in-charge with all lead, lifts, loading & unloading charges including cost and conveyance of all materials, labour, equipments, HOM of machinary and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer-in-charge of the work

code07 - Providing & fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S.tube of 19 gauge thickness, size 19x19mm for stiles and 15x15mm for top & bottom rails coveredwith heat moulded PVC C channel of 5mm thick sheet & 30 x 50mm wide to form stiles & 5mmthick & 75mm wide PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick20mm wide PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheetfitted in the M.S. Frame, Sealed to the stiles & rails with 5x30mm PVC sheet beading on either side& joined together with solvent cement adhesive etc., Complete as per manufacturers specification& direction of Engineer-in-charge fixed to frames with 3 nos of 75 mm Aluminium hinges with all lead, lifts, loading & unloading charges including cost and conveyance of all materials labour, equipments, HOM of machinary and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer-in-charge of the work

code08 - Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings wooden frames with rawl plugs screws etc with all lead lifts, loading & unloading charges including cost and conveyance of all materials, labour, equipments, HOM of machinary and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer-in-charge of the work

code09 - Providing and laying 60mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Cycle Tracks & Pedestrian Footpaths of approved shape and colour, laid in required pattern and including over 30mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-incharge. WMM WBM Base to be paid separately if necessary as per relevant technical specification with all lead, lifts, loading & unloading charges including cost and conveyance of all materials, labour, equipments, HOM of machinary and other incidental charges required for successfull completion of work etc complete as per specifications and as per the directions of the Engineer-in-charge of the work

code10 - Providing and laying in position plain cement concrete for leveling course for all works in foundation. The ranite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. Formwork included and The cost of steel reinforcement shall be paid separately Mix 1:3:6 M10 Using 40 mm nominal size graded crushed coarse aggregates with all lead lifts loading & unloading charges including cost and conveyance of all materials, labour, equipments, HOM of machinary and other incidental charges required for successfull completion of work etc., complete as per specifications and as per the directions of the Engineer-in-charge of the work

code11 - Providing and placing on terrace at all floor levels polyethylene water storage tank IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Item no with all lead lifts loading & unloading charges including cost and conveyance of all materials, labour, equipments, HOM of machinary and other incidental charges required for successfull completion of work etc., complete as per specifications and as per the directions of the Engineer-in-charge of the work