Rural Development And Panchayat Raj Department Tender

code04 - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates--- Charges with all lead and lift including other incedental charges wherever necessary for successful completion of work and as directed by the Engineer in Charge of Work Roof Slab

code05 - Providing Thermo-Mechanically treated bars of grade FE-500 F or more steel reinforcement for RCC work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent memebers wherever necessary complete as per design including cost of materil, labour, usage chages complete as per specification (The laps and wastages shall not be measured separately)--- Charges with all lead and lift including other incedental charges wherever necessary for successful completion of work and as directed by the Engineer in Charge of Work

code06 - Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications.--- Charges with all lead and lift including other incedental charges wherever necessary for successful completion of work and as directed by the Engineer in Charge of Work

code07 - Providing and fixing in position fully panelled Matti/Nandi wood shutters for doors with , stiles and rails of 30mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures)--- Charges with all lead and lift including other incedental charges wherever necessary for successful completion of work and as directed by the Engineer in Charge of Work

code08 - Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6 PHR with TPE (Thermo Plastic Elastomer) and lead free, gaskets -grey color having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 44mm width x 40mmheight with reinforcement of 1mm thickness and Sash with overall size of 27mm X 53mm with UPVC honeycomb structure inside in lieu of GI reinforcement.Coextruded Glazing bead for fixing of glass shall be of size 9.5mm x 21.5mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with Crescent Locks. Wall thickness of frame & sash shall be of 2 mm.Maximum possible size 1219mm x 1219mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made)--- Charges with all lead and lift including other incedental charges wherever necessary for successful completion of work and as directed by the Engineer in Charge of Work

code09 - Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding--- Charges with all lead and lift including other incedental charges wherever necessary for successful completion of work and as directed by the Engineer in Charge of Work

code10 - Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.--- Charges with all lead and lift including other incedental charges wherever necessary for successful completion of work and as directed by the Engineer in Charge of Work

code11 - Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.--- Charges with all lead and lift including other incedental charges wherever necessary for successful completion of work and as directed by the Engineer in Charge of Work

code12 - Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge--- Charges with all lead and lift including other incedental charges wherever necessary for successful completion of work and as directed by the Engineer in Charge of Work

code13 - Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. G.I. pipes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.--- Charges with all lead and lift including other incedental charges wherever necessary for successful completion of work and as directed by the Engineer in Charge of Work

code14 - Flooring with 25mm thick polished tandur blue stone slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab, , including cost of materials, labour, curing, polishing complete as per specifications.--- Charges with all lead and lift including other incedental charges wherever necessary for successful completion of work and as directed by the Engineer in Charge of Work

code15 - Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.--- Charges with all lead and lift including other incedental charges wherever necessary for successful completion of work and as directed by the Engineer in Charge of Work

code16 - Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge--- Charges with all lead and lift including other incedental charges wherever necessary for successful completion of work and as directed by the Engineer in Charge of Work

code17 - Painting wood work with Deluxe Multi Surface Paint of required shade Two coat applied @ 0.90L/10 m² over an under coat of primer applied @0.75 L/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge--- Charges with all lead and lift including other incedental charges wherever necessary for successful completion of work and as directed by the Engineer in Charge of Work