Rural Development And Panchayat Raj Department Tender

code04 - Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) with all lead & lift and loading-unloading charges, inclusive of cost and conveyance of all materials and cost of labour, hire charges of all machinery and equipments and all other incidental charges etc., complete as per specification and direction of the Engineer-in-charge of work.

code05 - Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) with all lead & lift and loading-unloading charges, inclusive of cost and conveyance of all materials and cost of labour, hire charges of all machinery and equipments and all other incidental charges etc., complete as per specification and direction of the Engineer-in-charge of work.

code06 - Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. with all lead & lift and loading-unloading charges, inclusive of cost and conveyance of all materials and cost of labour, hire charges of all machinery and equipments and all other incidental charges etc., complete as per specification and direction of the Engineer-in-charge of work.

code07 - Dismantling tile work in floors and roofs laid in cement mortar including stacking material to the appropriate disposal area as per direction of Engineer-in-charge. For thickness of tiles 10 mm to 25 mm with all lead & lift and loading-unloading charges, inclusive of cost and conveyance of all materials and cost of labour, hire charges of all machinery and equipments and all other incidental charges etc., complete as per specification and direction of the Engineer-in-charge of work.

code08 - Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregat with all lead & lift and loading-unloading charges, inclusive of cost and conveyance of all materials and cost of labour, hire charges of all machinery and equipments and all other incidental charges etc., complete as per specification and direction of the Engineer-in-charge of work.

code09 - Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.with all lead & lift and loading-unloading charges, inclusive of cost and conveyance of all materials and cost of labour, hire charges of all machinery and equipments and all other incidental charges etc., complete as per specification and direction of the Engineer-in-charge of work.

code10 - Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in foundations and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. with all lead & lift and loading-unloading charges, inclusive of cost and conveyance of all materials and cost of labour, hire charges of all machinery and equipments and all other incidental charges etc., complete as per specification and direction of the Engineer-in-charge of work.

code11 - Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. with all lead & lift and loading-unloading charges, inclusive of cost and conveyance of all materials and cost of labour, hire charges of all machinery and equipments and all other incidental charges etc., complete as per specification and direction of the Engineer-in-charge of work.

code12 - Supplying of Cudddapah slab 2.5cms thick with all lead & lift and loading-unloading charges, inclusive of cost and conveyance of all materials and cost of labour, hire charges of all machinery and equipments and all other incidental charges etc., complete as per specification and direction of the Engineer-in-charge of work.

code13 - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Percentage Additionalities for Formwork, Centering & Scaffolding RCC Roof Slabs with all lead & lift and loading-unloading charges, inclusive of cost and conveyance of all materials and cost of labour, hire charges of all machinery and equipments and all other incidental charges etc., complete as per specification and direction of the Engineer-in-charge of work.

code14 - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification Buildings with all lead & lift and loading-unloading charges, inclusive of cost and conveyance of all materials and cost of labour, hire charges of all machinery and equipments and all other incidental charges etc., complete as per specification and direction of the Engineer-in-charge of work.

code15 - Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. with all lead & lift and loading-unloading charges, inclusive of cost and conveyance of all materials and cost of labour, hire charges of all machinery and equipments and all other incidental charges etc., complete as per specification and direction of the Engineer-in-charge of work.

code16 - Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground to the appropriate disposal area as per direction of Engineer-in-charge. with all lead & lift and loading-unloading charges, inclusive of cost and conveyance of all materials and cost of labour, hire charges of all machinery and equipments and all other incidental charges etc., complete as per specification and direction of the Engineer-in-charge of work.

code17 - Providing Cement mortar 1:2 (1 cement : 2 stone dust) including cost of all materials, labour and usage charges of machinery complete as per the direction of engineer incharge of work. with all lead & lift and loading-unloading charges, inclusive of cost and conveyance of all materials and cost of labour, hire charges of all machinery and equipments and all other incidental charges etc., complete as per specification and direction of the Engineer-in-charge of work.

code18 - Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single component, cold applied, water based acrylic PU dispersion with highly elastic and UV resistant water proofing treatment to the Existing Roof surface/Chajjas/Sunken portion of WC:Bathroom applied @ 1.2 l/per m2, having tensile strength greater than 1.5N/mm2, elongation greater than 300% with solid content not less than 60% in 2 coats including surface preparation, priming the surface with water based acrylic primer @0.1 l/m2, and spreading 60 gsm geotextile between two top coats completely as per specification. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification with all lead & lift and loading-unloading charges, inclusive of cost and conveyance of all materials and cost of labour, hire charges of all machinery and equipments and all other incidental charges etc., complete as per specification and direction of the Engineer-in-charge of work.

code19 - Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in- Charge. with all lead & lift and loading-unloading charges, inclusive of cost and conveyance of all materials and cost of labour, hire charges of all machinery and equipments and all other incidental charges etc., complete as per specification and direction of the Engineer-in-charge of work.

code20 - Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1:3 (1 cement: 3 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. with all lead & lift and loading-unloading charges, inclusive of cost and conveyance of all materials and cost of labour, hire charges of all machinery and equipments and all other incidental charges etc., complete as per specification and direction of the Engineer-in-charge of work.

code21 - Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. with all lead & lift and loading-unloading charges, inclusive of cost and conveyance of all materials and cost of labour, hire charges of all machinery and equipments and all other incidental charges etc., complete as per specification and direction of the Engineer-in-charge of work.

code22 - Providing and fixing stainless steel Grade 304 railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature wherever required and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc. including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. with all lead & lift and loading-unloading charges, inclusive of cost and conveyance of all materials and cost of labour, hire charges of all machinery and equipments and all other incidental charges etc., complete as per specification and direction of the Engineer-in-charge of work.

code23 - Providing Red Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications with all lead & lift and loading-unloading charges, inclusive of cost and conveyance of all materials and cost of labour, hire charges of all machinery and equipments and all other incidental charges etc., complete as per specification and direction of the Engineer-in-charge of work.

code24 - Providing and fixing in position fully panelled Matti/Nandi wood shutters for doors with, stiles and rails of 35mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. excluding cost of fixtures with all lead & lift and loading-unloading charges, inclusive of cost and conveyance of all materials and cost of labour, hire charges of all machinery and equipments and all other incidental charges etc., complete as per specification and direction of the Engineer-in-charge of work.

code25 - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 20 mm nominal dia Pipes with all lead & lift and loading-unloading charges, inclusive of cost and conveyance of all materials and cost of labour, hire charges of all machinery and equipments and all other incidental charges etc., complete as per specification and direction of the Engineer-in-charge of work.

code26 - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 25 mm nominal dia Pipes with all lead & lift and loading-unloading charges, inclusive of cost and conveyance of all materials and cost of labour, hire charges of all machinery and equipments and all other incidental charges etc., complete as per specification and direction of the Engineer-in-charge of work.

code27 - Providing and fixing brass bib cock of approved quality : 20 mm nominal bore with all lead & lift and loading-unloading charges, inclusive of cost and conveyance of all materials and cost of labour, hire charges of all machinery and equipments and all other incidental charges etc., complete as per specification and direction of the Engineer-in-charge of work.

code28 - Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour charges and all lift charges, handling charges including encasing the pipe around to a depth not less than 15 cms with gravel or selected earth available from the excavation etc. complete.110mm 6 Kg/m2: (weight of pipe -1.894 kg) with all lead & lift and loading-unloading charges, inclusive of cost and conveyance of all materials and cost of labour, hire charges of all machinery and equipments and all other incidental charges etc., complete as per specification and direction of the Engineer-in-charge of work.

code29 - Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid with all lead & lift and loading-unloading charges, inclusive of cost and conveyance of all materials and cost of labour, hire charges of all machinery and equipments and all other incidental charges etc., complete as per specification and direction of the Engineer-in-charge of work.

code30 - Repairs to plaster in patches of 2.5 m2 and less in walls, ceilings 10 to 20mm thick in cement mortar 1:6 including cutting the patches in proper shape and replastering the surface of the wall including disposal of rubbish with a lead of 50m including curing cost of materials, labour, complete as per specification with all lead & lift and loading-unloading charges, inclusive of cost and conveyance of all materials and cost of labour, hire charges of all machinery and equipments and all other incidental charges etc., complete as per specification and direction of the Engineer-in-charge of work.

code31 - Repairing door and window frames with avai st and conveyance of all materials and cost of labour, hire charges of all machinery and equipments and all other incidental charges etc., complete as per specification and direction of the Engineer-in-charge of work.

code32 - Repairing and fixing shutters (panelled or glazed) to doors, windows, ventilators and cupboards with all lead & lift and loading-unloading charges, inclusive of cost and conveyance of all materials and cost of labour, hire charges of all machinery and equipments and all other incidental charges etc., complete as per specification and direction of the Engineer-in-charge of work.

code33 - Supplying RCC NP 3 1200mm dia with all lead & lift and loading-unloading charges, inclusive of cost and conveyance of all materials and cost of labour, hire charges of all machinery and equipments and all other incidental charges etc., complete as per specification and direction of the Engineer-in-charge of work.

code34 - Providing and laying 100mm thick pre-cast cover slabs over Road side drains / utility ducts / Rain water harvesting pit of width not exceeding 1000 mm using M20 concrete reinforced with TMT bars Fe 550 at 6kg/ m2, slabs jointed in CM 1:3 proportion and nicely finished Including providing holes in the Cover slabs wherever necessary for easy drainage of surface water including of labour, materials, scaffolding, usage of machinery, curing, lead and lift charges etc, Complete. with all lead & lift and loading-unloading charges, inclusive of cost and conveyance of all materials and cost of labour, hire charges of all machinery and equipments and all other incidental charges etc., complete as per specification and direction of the Engineer-in-charge of work.

code35 - Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. including painting with anticorrosive approved paint etc. complete including all lead and lifts etc with all lead & lift and loading-unloading charges, inclusive of cost and conveyance of all materials and cost of labour, hire charges of all machinery and equipments and all other incidental charges etc., complete as per specification and direction of the Engineer-in-charge of work.

code36 - Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of Special primer applied @ 0.75 L/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (The gloss should be 50% @ 60 degree angle with 10 years life) with all lead & lift and loading-unloading charges, inclusive of cost and conveyance of all materials and cost of labour, hire charges of all machinery and equipments and all other incidental charges etc., complete as per specification and direction of the Engineer-in-charge of work.

code37 - Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. with all lead & lift and loading-unloading charges, inclusive of cost and conveyance of all materials and cost of labour, hire charges of all machinery and equipments and all other incidental charges etc., complete as per specification and direction of the Engineer-in-charge of work.

code38 - Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @0.75 L/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. with all lead & lift and loading-unloading charges, inclusive of cost and conveyance of all materials and cost of labour, hire charges of all machinery and equipments and all other incidental charges etc., complete as per specification and direction of the Engineer-in-charge of work.

code39 - Scarifying Existing Granular Surface to a Depth of 50 mm by Manual Means with all lead & lift and loading-unloading charges, inclusive of cost and conveyance of all materials and cost of labour, hire charges of all machinery and equipments and all other incidental charges etc., complete as per specification and direction of the Engineer-in-charge of work.

code40 - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density with all lead & lift and loading-unloading charges, inclusive of cost and conveyance of all materials and cost of labour, hire charges of all machinery and equipments and all other incidental charges etc., complete as per specification and direction of the Engineer-in-charge of work.

code41 - Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M20 (Grade), coarse and fine aggregates conforming to IS:383:2016, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including construction joints, , primer, sealant , curing of concrete slabs for 14 days, and water finishing to lines and grade as per drawing and technical specification clause 1501 with all lead, lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments etc., complete. as per the directions of the Engineer-in-charge of the work. with all lead & lift and loading-unloading charges, inclusive of cost and conveyance of all materials and cost of labour, hire charges of all machinery and equipments and all other incidental charges etc., complete as per specification and direction of the Engineer-in-charge of work.