Rural Development And Panchayat Raj Department Tender

code04 - Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates include With all lead and lifts, loading and unloading charges, cost and convergence of all materials, HOM and all other incidental charges. Work shall be carried out as directed by engineer- in-charge of the work

code05 - Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) include With all lead and lifts, loading and unloading charges, cost and convergence of all materials, HOM and all other incidental charges. Work shall be carried out as directed by engineer- in-charge of the work

code06 - Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations and other similar works etc. in layers not exceeding20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. include With all lead and lifts, loading and unloading charges, cost and convergence of all materials, HOM and all other incidental charges. Work shall be carried out as directed by engineer- in-charge of the work

code07 - Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. include With all lead and lifts, loading and unloading charges, cost and convergence of all materials, HOM and all other incidental charges. Work shall be carried out as directed by engineer- in-charge of the work

code08 - Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding include With all lead and lifts, loading and unloading charges, cost and convergence of all materials, HOM and all other incidental charges. Work shall be carried out as directed by engineer- in-charge of the work

code09 - Galvanised wire mesh of average width of aperture 1.4 mm and nominal dia of wire 0.63 mm include With all lead and lifts, loading and unloading charges, cost and convergence of all materials, HOM and all other incidental charges. Work shall be carried out as directed by engineer- in-charge of the work

code10 - Supplying S&S RCC SPUN/VIBRATED CAST PIPES (REINFORCED)pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work site, rolling and lowering into trenches, laying true to line and level including loading and unloading at both destinations and jointing of pipes and specials, perfect linking of joints with jack to correct position including cost of jointing materials, i.e, rubber rings conforming to IS: 5382 for S&S RCC pipes, with all leads and lifts as directed and giving necessary hydraulic test as per ISS to the required pressure and commissioning etc. complete. (Contractor will make his own arrangements for procuring water for testing). Before the execution of the work, the contractor shall carry out the survey include With all lead and lifts, loading and unloading charges, cost and convergence of all materials, HOM and all other incidental charges. Work shall be carried out as directed by engineer- in-charge of the work

code11 - Supplying UNPLASTICISED PVC pipes conforming to IS 16098:2013with latest amendments ended with integral sockets with ISI mark andconveying to worksite, rolling and lowering into trenches, laying true toline and level and perfect linking at joints, testing and commissioning,including loading and unloading at both destinations and cuts of pipeswherever necessary including jointing of UPVC pipes (with cost ofelastomeric sealing rings) and specials (excluding cost of specials) withjointing of approved type, with all labour, lead & lifts, including encasingthe pipes alround to a depth of not less than 15 cms. with soft gravelor selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (contractor will make his own arrangements for procuring water for testing) etc. for include With all lead and lifts, loading and unloading charges, cost and convergence of all materials, HOM and all other incidental charges. Work shall be carried out as directed by engineer- in-charge of the work

code12 - 110 mm dia PVC Tee include With all lead and lifts, loading and unloading charges, cost and convergence of all materials, HOM and all other incidental charges. Work shall be carried out as directed by engineer- in-charge of the work

code13 - Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. including painting with anticorrosive approved paint etc. complete including With all lead and lifts etc. include all lead and lifts, loading and unloading charges, cost and convergence of all materials, HOM and all other incidental charges. Work shall be carried out as directed by engineer- in-charge of the work

code14 - Supplying and filling in plinth with sand under floors, foundation of Bridges including watering, ramming, consolidating and dressing complete include With all lead and lifts, loading and unloading charges, cost and convergence of all materials, HOM and all other incidental charges. Work shall be carried out as directed by engineer- in-charge of the work

code15 - Good Quality well burnt Charcoal for grounding 600095 No 412 600 purposes packed in non returnable gunny bag of 30 Kg each include With all lead and lifts, loading and unloading charges, cost and convergence of all materials, HOM and all other incidental charges. Work shall be carried out as directed by engineer- in-charge of the work

code16 - 40mm downsize aggregate include With all lead and lifts, loading and unloading charges, cost and convergence of all materials, HOM and all other incidental charges. Work shall be carried out as directed by engineer- in-charge of the work

code17 - 20mm downsize aggregate include With all lead and lifts, loading and unloading charges, cost and convergence of all materials, HOM and all other incidental charges. Work shall be carried out as directed by engineer- in-charge of the work

code18 - Providing and fixing of typical Logo board as per specifications and drawing. Two ACP Sheet of 3mm thick, top and Bottom plate duly welded/bolted with MS Square angle 25mm x25mmx 5mm size on back and on the edges. The Top and Bottom plate will be welded/ bolted to 1 nos75x75x6 mm square Hallow section duly embedded in cement concrete M15 Grade of 600*600*600 mm, 450 mm below ground level.Retro- Reflecting Sheet as per IRC:67 Clause 1701.3.8.1 fixed over aluminium sheeting.All sections of steel tube will bepainted with primer and two coats of epoxy paint as per drawing.A.Retro Reflective Trafic Sign As per IRC 67 Clause 1701.3.8.1 Class A Type-1 include With all lead and lifts, loading and unloading charges, cost and convergence of all materials, HOM and all other incidental charges. Work shall be carried out as directed by engineer- in-charge of the work