Rural Development And Panchayat Raj Department Tender

code04 - Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) - M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates PWD SR 2023-24, V-1 I No:2.2.1 P-15 Rs:(6287.00+5%)/cum

code05 - Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) - M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates PWD SR 2023-24, V-1 I No:2.5.1 P-16 Rs:(6630.00+5%)/cum

code06 - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification - Building PWD SR 2023-24, V-1 I No.2.11(a) P-18 Rs:(89457.00+5%)/t

code07 - Form work, centering and scaffolding for Foundation PWD SR 2023-24, V-1 I No:1 P-115 Rs:(6287.00*8%*5%)/cum

code08 - Form work, centering and scaffolding for Columns & Piers PWD SR 2023-24, V-1 I No:8 P-115 Rs:(6630.00*70%*5%)/cum

code09 - Form work, centering and scaffolding for Roof (Straight & Arched) of Building PWD SR 2023-24, V-1 I No:12 P-115 Rs:(6630.00*50%*5%)/cum

code10 - Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work PWD SR 2023-24, V-2 I No.6.8 P-14 Rs:(7969.00+5%)/cum

code11 - Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished rough with sponge to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge PWD SR 2023-24, V-2 I No.8.9 P-42 Rs:(385.00+5%)/sqm

code12 - Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied @1.43 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge PWD DSR.2023-24/V-2, Pg- 46 I No.8.31 Rs. 178.00/sqm

code13 - Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding PWD SR 2023-24, V-2 I No.11.34A P-86 Rs:(168.00+5%)/kgs

code14 - Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. ( excluding cost of fixtures ) CSR 2023-24 Volume-II Sl.no-12.15 p no 100(7444.00+5%)/sqm

code15 - Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications.CSR 2023-24 Volume-2 Sl.no-12.51(1016+5%)/nos

code16 - Providing & fixing of 3track 2panel sliding windows made out of multi hammered UPVCMatching toRAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with T PET thermo Plastic Elastomerand lead free, gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile throughout the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm 75mm with GI reinforcement of 2mm and mesh sash of size 37mm 58mm. Co extruded Glazing bead for fixing of glass shall be of size 20mm 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm 2.5mm. Maximum possible size 2419mm 2200mm. The cost is inclusive of all fixtures and separate charges for minor T Ps shall not be made C SR 2023-24 Vol2 S l.no12.90 p no 110 rs.6734