Rural Development And Panchayat Raj Department Tender

4.23 404 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specificationincluding spreading in uniform thickness, hand packing, rollingwith 3 wheeled steel/ vibratory roller in stages to proper gradeand camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate,watering and compacting to the required density.Grading-I (63 mm to 45 mm) 1)Mechanical Means 2)Using Screening Type A (13.2mm agg) include all lead and lifts, loading and unloading charges, cost and convergence of all materials, HOM and all other incidental charges. Work shall be carried out as directed by engineer- in-charge of the work

Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work include all lead and lifts, loading and unloading charges, cost and convergence of all materials, HOM and all other incidental charges. Work shall be carried out as directed by engineer- in-charge of the work

Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including construction joints, , primer, sealant , curing of concrete slabs for 14- days, and water finishing to lines and grade as per drawing and technical specification clause 1501 with all lead, lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments etc., complete. as per the directions of the Engineer-in-charge of the work include all lead and lifts, loading and unloading charges, cost and convergence of all materials, HOM and all other incidental charges. Work shall be carried out as directed by engineer- in-charge of the work

Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm widthc including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge & MoRTH specification 804 I.No.MORTH 804 include all lead and lifts, loading and unloading charges, cost and convergence of all materials, HOM and all other incidental charges. Work shall be carried out as directed by engineer- in-charge of the work