Rural Development And Panchayat Raj Department Tender
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
Costs
EMD
₹ 70,600Document Cost
Refer DocumentsTender Fee
₹ 890
Summary
Packageno6construction Work Of One Class Room Govt Higher Primary Schoolannedoddi Village Kolliganahalla G.p, Harohalli Taluk And Construction Work Of One Class Room Govt Lower Primary School Dimbadalli Village, Doddamuduvadi G.p, Harohalli Taluk, Construction Work Of One Class Room (1st Floor) Govt Higher Primary School Kallanakuppe Village, Yalachavadi G.p, Harohalli Taluk
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
RDPR/2024-25/BD/WORK_INDENT6263/CALL-2Bid Award Id
ViewTender No
RDPR/2024-25/BD/WORK_INDENT6263/CALL-2Tender Authority
Rural Development And Panchayat Raj Department ViewPurchaser Address
-Website
http://https://www.tnrd.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
code04 - Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.
91.8
273
25151.364
code05 - Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.
63
488
30757.86
code06 - Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.
20.46
6702
137130.6948
code07 - Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.
6.14
10938
67164.1706
code08 - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (P.No. 16 /I.No. 2.5.1 Vol-1 PWD SR 2023-24) ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.
29.1
10143
295187.49
code09 - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.
12.66
10806
136815.354
code10 - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.
0.14
9812
1373.736
code11 - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire /soft annealed steel wire and other ancilary operations complete as per drawing and technical specification ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.
4.72
92140
434904.1512
code12 - Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.
211.02
1267
267558.5886
code13 - Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.
143.4
287
41208.858
code14 - Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.
226.24
382
86453.0912
code15 - Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.
116.16
248
28834.3968
code16 - Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.
8.64
6512
56269.6416
code17 - Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding. ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.
270
173
46720.8
code18 - Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in- Charge.. ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.
4.2
4612
19371.828
code19 - Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimumTiO2(Titanium Dioxide) at 6 PHR with TPE (Thermo Plastic Elastomer) and lead free, gaskets -grey color having isolated drainage and rein forced withGalvanized Iron profile through-out the window frame. The outer frame having an overall size of 44mm width x 40mmheight with reinforcement of 1mm thickness and Sash with overall size of 27mm X 53mm with UPVC honeycomb structure inside in lieu of GI reinforcement. Coextruded Glazing bead for fixing of glass shall be of size 9.5mm x 21.5mm. Windows shall be provided with 5mm plain float glass, stand ard hardware& single point locking system with Crescent Locks. Wall thickness of frame & sash shall be of 2 mm.Maximum possible size 1219mm x 1219mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.
10.8
5173
55875.852
code20 - Fixing of window frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debries with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.
6
796
4777.14
code21 - Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.
259.56
103
26734.68
code22 - Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.
259.56
141
36626.5116
code23 - Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.
226.24
179
40546.7328
code24 - Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.
30
172
5160.3
code25 - Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete Size of Tile 600x600 mm ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.
123.36
1179
145484.616
code26 - Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.
6.82
1492
10178.6454
code27 - Providing wall black boards in 12mm thick with CM 1:3 and applied with primer & two coats of acrylic emulsion black paint including finishing etc.,complete. ( I.No. ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.
9.6
489
4696.8
code28 - 1st Floor Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.
5.69
7359
41874.417
code29 - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.
17.16
8022
137662.668
code30 - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.
0.1
9679
967.98
code31 - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire /soft annealed steel wire and other ancilary operations complete as per drawing and technical specification ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.
2.75
90351
248466.8175
code32 - Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.
102.18
1323
135194.358
code33 - Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.
91.29
281
25724.6091
code34 - Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.
172.65
374
64693.6815
code35 - Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.
61.44
243
14955.1104
code36 - Providing lime wash on walls with one coat with lime of approved quality to give an even shade, including cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.
325.38
10
3286.338
code37 - Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.
135
169
22906.8
code38 - Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in- Charge. ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.
2.1
4522
9497.838
code39 - Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.
1
1026
1026.16
code40 - Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimumTiO2(Titanium Dioxide) at 6 PHR with TPE (Thermo Plastic Elastomer) and lead free, gaskets -grey color having isolated drainage and rein forced withGalvanized Iron profile through-out the window frame. The outer frame having an overall size of 44mm width x 40mmheight with reinforcement of 1mm thickness and Sash with overall size of 27mm X 53mm with UPVC honeycomb structure inside in lieu of GI reinforcement. Coextruded Glazing bead for fixing of glass shall be of size 9.5mm x 21.5mm. Windows shall be provided with 5mm plain float glass, stand ard hardware& single point locking system with Crescent Locks. Wall thickness of frame & sash shall be of 2 mm.Maximum possible size 1219mm x 1219mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.
5.4
5073
27395.442
code41 - Fixing of window frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debries with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.
3
780
2342.19
code42 - Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.
152.73
101
15425.73
code43 - Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.
152.73
138
21133.2501
code44 - Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.
172.65
175
30341.511
code45 - Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.
18.75
168
3162.5625
code46 - Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete Size of Tile 600x600 mm ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.
122.88
1156
142104.576
code47 - Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.
3.4
1463
4975.866
code48 - Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.
675
139
94081.5
code49 - Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.
10.13
6279
63607.9921
code50 - Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.
67.5
336
22702.275
code51 - Concealed Conduit System : Supplying heavy gauge PVC conduit pipe ……mm dia ....... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary. 19/20mm dia 2mm thick ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.
120
66
7920
code52 - Supplying and fixing PVC/metal conduit Deep junction box 19/20mm deep junction box ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.
20
49
980
code53 - Supplying And Fixing Metal Fan Box with Round Hook ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.
18
117
2106
code54 - Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point upto 3Mtr from tapping point to out let via switch ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.
12
285
3420
code55 - Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.
20
394
7880
code56 - Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Long point above 6Mtr upto 10Mtr from tapping point to out let via switch ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.
12
570
6840
code57 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. .5 mm2. ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.
135
26
3510
code58 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 2.5 mm2 ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.
135
42
5670
code59 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 4 sqmm. ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.
55
63
3465
code60 - Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 6Way ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.
12
220
2640
code61 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 6 Module ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.
12
234
2808
code62 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A One Way Switch ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.
30
102
3060
code63 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator Two Module ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.
12
357
4284
code64 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32Amps DP switch. ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.
6
326
1956
code65 - Supplying and fixing/replacing of 6/16/32Amps electrical accessories on existing switch board 6Amps Bakelite ceiling rose ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.
18
78
1404
code66 - Supplying and fixing/replacing of 6/16/32Amps electrical accessories on existing switch board 6 Amps Pendant Holder ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.
18
71
1278
code67 - Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 40 Amps DP ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.
4
1060
4240
code68 - Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-3741979 and with double ball bearing system. 48" Sweep (1200mm) Regular model ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.
7
2984
20888
code69 - Supplying of ......feet - PVC Batten with integrated LED tube .....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fighting 1 x4'- 20/22 w ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.
6
690
4140
code70 - Supplying & fixing of retrofit type LED bulb.......W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per watt, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 12W, 6500K ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.
8
269
2152
code71 - Supplying, fixing, wiring, earth electrode for grounding conduits, I.C.cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should be filled with equal proportion of salt and charcoal 150 mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per lSI specification 7.3.3. of IS 732 using 12 mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.
3
3510
10530
code72 - Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas/spacers etc. GI/Copper strips ---- with all lead and lift and loading and unloading charges cost and conveyance of all materials, labour charges hire charges of equipment and all other incidental charges etc., complete as per standard technical specification and direction of the Engineer in charge of the work.
30
82
2460
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements