Rural Development And Panchayat Raj Department Tender

9.1.3 - Supplying, erecting, testing and commissioning of voltage stabilizer suitable for 170 to 270 v input and load variation from no load to full load, with over load protection, spike suppression, operating at 00 C to 400 C. Range etc., complete.5kVA Capacity

9.5.10 - Supplying, installation, testing & commissioning of 12V DC, AH batteries in poly propylene container for U.P.S. Sealed maintenance free batteries.200AH capacity

2.3.3 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694:2010.2.5 mm2

1.6.1 - Supplying and flush mounting teak wooden box without front plank, made of not less than 12 mm thick wood, after due groove cutting, finishing with necessary cement plastering complete.12" x 12" x 3" (300 x 300 x 76 mm)

3.6.3 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A Three Way socket

3.6.2 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A Two Way Switch

11.26.3 - Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. G.I. pipes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge

60.10 - 6.6 kV, 1C X 400 Sq mm earth continuity cable (sheath bonding cable) as per technical specification Main Line Copper Cable

Gem Rate - Supplying of KYOCERa Laser Colour Computer Printers for A4 paper Sixe Colour Printer

Gem Rate - Office Table 6*3.5 Foot for Wooden Executive Table with both side pedestal unit Office Table for wooden

Gem ate - Revolving Chairs Executive Char Revolving Chair with Synchronictit Mechanism Revolving Chair

11.44 - Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.

10.25.A - Providing, fabricating and fixing of 6 mm thick High Pressure Laminate sheets in standard size of 1200 mm x 2400 mm (Sheets can be supplied in customized length depending on requirement). Sheets shall be manufactured involving a series of mechanical process in a state-of-the-art facility shall comprise of 0.25 mm Aluminium skins on both sides sandwiching an LDPE (Low Density Poly Ethylene) core having a density of 0.92 g/cm3 giving the overall weight of HPL at 7.8 kg/m2. Aluminium skins to have a desired lacquer in Lumiflon coated on one side/Both side. The supplied panels shall have a dexterity to be formed in convex and concave shapes as also the ability to bend in 90 degrees under a mechanical process. Panel will be installed on Aluminium tubes at 500 mm c/c distance with special L brackets. There will be special fixing treatment on all the corner sections. Aluminium tube size will be 25 mm x 50 mm. Boards will be fixed on the Aluminium channels with colour matched rivets/ MS polymer Adhesives and brackets through 8 mm drill hole in boards and 5 mm dia drill holes in aluminium box. Rivets will be installed by automatic rivet guns / adhesive should be used with proper silicone extrusion gun and properly laid over panel and aluminium tube on every 500mm gap as per direction of Engineer in charge.

11.11.7 - Supplying & fixing of retrofit type - LED bulb . W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per W, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF 0.95, power loss should 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition.18W, 6500K

2.3.2 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694:2010.1.5 mm2

6.7.2 - Supplying .TR split Air conditioners suitable for operation on A/C supply single phase 50 Hz 230 V with hermetically sealed compressor with air cooled condenser, motor capacitor and start run capacitors, relay and over load protector internal unit, with one indoor and one outdoor unit The condenser unit will be placed outside the room on the terrace to avoid noise including standard length of suitable size copper tubing covered with insulation tube. (High wall chorded/cordless) suitable capacity 3 core sheathed/ PVC copper cable and a battery operated wireless remote unit 1.5 Toncapacity

6.12 - Installation charges for split type air conditioner with allied works for one indoor and one outdoor unit is to be mounted on suitable Angle Iron support upto 3.0 Ton split/cassette type A/C.

6.13.1 - Supplying and installation of insulated refrigerant copper tubing of 5/8" and 3/8" with polythene foam insulation 3 core 80 stand copper wiring between indoor and outdoor unit Leak testing oil and gas charging for additional piping length of tube.Split

6.14.1 - Supplying installation testing and commissioning of heavy duty compressor suitable for window/split type A/C. Testing upto 2 ton Capacity

6.15.1 - Supply and fixing of condensing coil for Split Air Conditioners. 1.5 Ton

6.16.1 - Supplying and fixing capacitor's (of approved make) for window /split air conditioners.25 to 45mfd running capacitor.

6.17 - Supplying & fixing relay for over load protection for window and split air conditioners

6.22 - Extra for Fabrication supply and fixing of Stand fabricated using slotted angle /L angle of size 6mm x 50mm for mounting out door/indoor A.C. unit/ Batteries

6.23.1 - Supply and fixing of out door condensing unit complete with condensing coil, blower, fan etc., complete suitable for Split Air Conditioners.1 Ton

Gem Rate - Supply of Promark Magnetic White Dry Erase Writing board of dimensions in mm 900x1200 White Board

2.3.2 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694:2010.1.5 mm2

2.3.2 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694:2010.1.5 mm2

3.6.3 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A Three Way socket

3.6.2 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.2 6A Two Way Switch

3.7 - Supplying and fixing 32A security and energy saving DP switch with key tag suitable to operate on 230 V, 50Hz AC supply & completely wired on existing box.

1.4.7 - Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc.200 x 200 x 65 mm

1.1.4 - Open Conduit System.Supplying heavy gauge PVC conduit pipe . dia . mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceiling and RCC wall/ stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws.40 mm dia 2.5 mm thick

60.10 - 6.6 kV, 1C X 400 Sq mm earth continuity cable (sheath bonding cable) as per technical specification. main line Copper cable

8.11.1 - Supplying & Fixing of . ms Cat 6 Patch Cable 1 m

8.12.2 - Supplying & Fixing of Patch panel for LAN cabling.24 Port 101100 patch panel

8.4.6 - Supplying & Fixing of switch mounting rack with power manager & Cable manager.24U with 650mm depth

Gem Rate - Digital Podium Specifications: Podium Size Front Height 48 inch Height Present Side 42 inch Width 24 Inch Depth 21 inch HDMI Multimedia Controller 22 nch Panel with 55 degree adjustable tilt Motorized Drawer for Visilaiser Key Board/Mouse tray and sliding Top tray for Laptop CPU Core i3/i5/i7 2/4/8 GB RAM 500 GB SDD Win OS Key Board and Mouse etc Amplifier 30-350 Watt 1 Goosenek Mic Speakers Dual Channel Misc

Gem Rate - Computer Table and Chair; of size 76 cm L x 45 cm B x 76 cm H The Pedestal made out of rectangular tubular section of 5 cm x 2.5 cm x 14 G Thickness and also for bottom Horizontal The Vertical upright are of tubular section 2.5 cm x 2.5 cms 14G 2 Nos for each pedestal welded in the middle of bottom horizontal at 22 cms apart and this gap in between the two up right shall be paved with 20 mm thick both side pre laminated partial board. The table top fixing frames shall also be made out 2.5 cm x2.5 cm x14 G tubular section. The table top shall be of 20 mm thick per Laminated partial Novapan) Neatly lipped all round and with a sunk portion in front of the table top wit size 56 cm L x 30 Cm B x 4 cm D to Keep key board. The sunk portion be at a distance 46 cms from left or 20 cms from right side of the top. Computer Table and Wheel Chair