Rural Development And Panchayat Raj Department Tender

code04 - Construction of subgrade and earthern shoulders onstruction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 Ch-0.00 to 3.965Km ---- Charges with all lead and lift including other incidental charges wherever necessary for successful completion of work and as directed by the Engineer in charge of work.

code05 - WBM Grading 2 Stone Screening: Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. (B)By Mechanical Means. Ch-0.00 to 3.965Km ---- Charges with all lead and lift including other incidental charges wherever necessary for successful completion of work and as directed by the Engineer in charge of work.

code06 - Primer coat on Stabilized Soil surface. Providing and applying primer coat with bitumen emulsion (SS-2) on prepared surface of granular base including cleaning of surface and spraying primer at the rate of 1.0 kg/ m2 using mechanical means as per Technical Specification. Ch-0.00 to 3.965Km ---- Charges with all lead and lift including other incidental charges wherever necessary for successful completion of work and as directed by the Engineer in charge of work.

code07 - Open - Graded Premix Surfacing : Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscosity grade bitumen VG-30 to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable Hot mix plant of capacity not less than 40/60 TPH laying and rolling with a smooth wheeled roller, finished to required level and grades. Ch-0.00 to 3.965Km ---- Charges with all lead and lift including other incidental charges wherever necessary for successful completion of work and as directed by the Engineer in charge of work.

code08 - Seal Coat :Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per Technical Specification Clause 508 Case - II : Type B using VG-30 Bitumen Ch-0.00 to 3.965Km ---- Charges with all lead and lift including other incidental charges wherever necessary for successful completion of work and as directed by the Engineer in charge of work.

code09 - Microsurfacing as per IRC SP 81:2008 :Providing and laying Micro Surfacing Course Type II for traffic 1500CVPD with 6mm thickness as per IRC SP 81:2008 on existing structural sound & distressed pavement surface. (It is to be applied over an existing pavement surface which is structurally sound, but the surface is showing signs of premature ageing, aggregate loss, high degree of polishing, oxidation / hungry surface ) comprising of aggregates confirming to section 514 of MoRTH Specification. The Modified Bitumen Emulsion @ 10%, Filler cement @ 2%, Additive @ 0.5% and water as per requirement, aggregates as per Table 500-27. All these ingredients are mixed with required quantity of water to prepare semi fluid mass. The mix shall be spread mechanically using Microsurfacing Paver. The Cost includes cleaning of surface with Air compresser, laying and compacting to provide even riding surface and shall be rolling by Pneumatic Tyre Roller and ensure excessive movement does not occur, including cost of all materials, labour, usage charges of machinery, lead, lifts, loading, unloading, stacking, transporting, etc complete as per technical specification. Ch-0.00 to 3.965Km ---- Charges with all lead and lift including other incidental charges wherever necessary for successful completion of work and as directed by the Engineer in charge of work.

code10 - Providing and fixing citizen informatory board : Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation,refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge & MoRTH specification 804 ---- Charges with all lead and lift including other incidental charges wherever necessary for successful completion of work and as directed by the Engineer in charge of work.

code11 - Direction and Place Identification signs upto 0.9 sqm size board.A.Retro-reflectorised Traffic Signs. Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67:2012 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick or Aluminium composite material sheet with overall thickness of 4mm with area not exceeding 0.9 m2 fixed over back support frame of min 35 x 35 x 3mm angle mounted on a mild steel circular pipe 65 NB, firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing ---- Charges with all lead and lift including other incidental charges wherever necessary for successful completion of work and as directed by the Engineer in charge of work.

code12 - Kilometre Stone: Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc Ordinary kilometer stone (precast) ---- Charges with all lead and lift including other incidental charges wherever necessary for successful completion of work and as directed by the Engineer in charge of work.

code13 - Kilometre Stone: Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc 200 m stone (precast) ---- Charges with all lead and lift including other incidental charges wherever necessary for successful completion of work and as directed by the Engineer in charge of work.

code14 - Painting Lines, Dashes, Arrows etc on Roads in Two Coats on New Work : Painting lines, dashes, arrows etc on roads in two coats on new work with ready mixed road marking paint conforming to IS:164:2015 on bituminous surface, including cleaning the surface of all dirt, dust and other foreign matter, emarcation at site and traffic control Up to 10 cm in width Ch-0.00 to 3.965Km ---- Charges with all lead and lift including other incidental charges wherever necessary for successful completion of work and as directed by the Engineer in charge of work.